Add Epson RX8025 RTC support
PATCH 1/3 Add Epson RX8025 RTC support
This is the first patch of a series of three patch that will add support the the esd PMC440 board. The patches are based on Stefan's ppc4xx for-1.3.1 branch. But at least the first two should cleanly apply against the main repository. So perhaps Stefan is willing to apply them to his for-1.3.1 brach.
Matthias
Add Epson RX8025 RTC support
---
commit a03f5c336a82564932e6d4e00a26cebb5f4e8694
tree 4c2c01110e7a496f3896c0f7057cd05ba32dae61
parent 36325b056a3816cd51240966c68050427d49813b
author Matthias Fuchs <[email protected]> Fri, 09 Nov 2007 15:46:23 +0100 committer Matthias Fuchs <[email protected]> Fri, 09 Nov 2007 15:46:23 +0100
rtc/Makefile | 2 - rtc/rx8025.c | 229 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 230 insertions(+), 1 deletions(-)
rtc/Makefile +1 -1
@@ -32,7 +32,7 @@ COBJS = date.o \ ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \ m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \ mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o \ - mcfrtc.o x1205.o + mcfrtc.o x1205.o rx8025.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))
rtc/rx8025.c new file +229 -0
229 lines not on this page · raw message
PATCH 1/3 Add Epson RX8025 RTC support
Quoted 5 lines · In message <[email protected]> you wrote:
This is the first patch of a series of three patch that will add support the the esd PMC440 board. The patches are based on Stefan's ppc4xx for-1.3.1 branch. But at least the first two should cleanly apply against the main repository. So perhaps Stefan is willing to apply them to his for-1.3.1 brach.
...
rtc/Makefile COBJS = date.o \ · line 35
Quoted 6 lines
rtc/Makefile +1
-1@@ -32,7 +32,7 @@ COBJS = date.o \ ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \ m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \ mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o \ - mcfrtc.o x1205.o + mcfrtc.o x1205.o rx8025.o
Please keep lists sorted.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "May your future be limited only by your dreams." - Christa McAuliffe