Skip to contentSkip to conversation

arm: Removing config variable DEBUG_S3C_PORT

PATCH In review Jiri Olsa 2 participants 2 messages Nov 15, 2007 – Nov 16, 2007

Subsystems (2)
lore
Share & tools
lore

Jiri Olsa

author
#0 lore raw

PATCH 1/1 arm: Removing config variable DEBUG_S3C_PORT

Removing config variable DEBUG_S3C_PORT, since it is not used

---
 arch/arm/Kconfig.debug             |    8 --------
 arch/arm/configs/s3c2410_defconfig |    1 -
 2 files changed, 0 insertions(+), 9 deletions(-)
arch/arm/Kconfig.debug +0 -8
index 18101f5..55a3b40 100644
@@ -82,14 +82,6 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C_PORT
-	depends on DEBUG_LL && PLAT_S3C
-	bool "Kernel low-level debugging messages via S3C UART"
-	help
-	  Say Y here if you want debug print routines to go to one of the
-	  S3C internal UARTs. The chosen UART must have been configured
-	  before it is used.
-
 config DEBUG_S3C_UART
 	depends on PLAT_S3C
 	int "S3C UART to use for low-level debug"
arch/arm/configs/s3c2410_defconfig +0 -1
index f8a1645..b94d8d4 100644
@@ -1392,7 +1392,6 @@ CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
#1 lore raw
Quoted 1 line · Jiri Olsa

Removing config variable DEBUG_S3C_PORT, since it is not used

Hi, thanks for spotting this was unused, however I think it should be being used, and will look at doing a patch to make this used again.

Quoted 37 lines
---
 arch/arm/Kconfig.debug             |    8 --------
 arch/arm/configs/s3c2410_defconfig |    1 -
 2 files changed, 0 insertions(+), 9 deletions(-)
arch/arm/Kconfig.debug +0 -8
index 18101f5..55a3b40 100644
@@ -82,14 +82,6 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C_PORT
-	depends on DEBUG_LL && PLAT_S3C
-	bool "Kernel low-level debugging messages via S3C UART"
-	help
-	  Say Y here if you want debug print routines to go to one of the
-	  S3C internal UARTs. The chosen UART must have been configured
-	  before it is used.
-
 config DEBUG_S3C_UART
 	depends on PLAT_S3C
 	int "S3C UART to use for low-level debug"
arch/arm/configs/s3c2410_defconfig +0 -1
index f8a1645..b94d8d4 100644
@@ -1392,7 +1392,6 @@ CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
Signature · 5 lines
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.