Fix the configuration dependencies
Subsystems (4)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/5 Rename vmcoreinfo's macros returning the size
VMCOREINFO_SIZE() should be renamed VMCOREINFO_STRUCT_SIZE() since it's always returning the size of the struct with a given name. This change would allow VMCOREINFO_TYPEDEF_SIZE() to simply become VMCOREINFO_SIZE() since it need not be used exclusively for typedefs.
This discussion is the following:
http://www.ussg.iu.edu/hypermail/linux/kernel/0709.3/0582.html
---
arch/ia64/kernel/machine_kexec.c +1 -1
@@ -135,7 +135,7 @@ void arch_crash_save_vmcoreinfo(void)VMCOREINFO_SYMBOL (node_memblk);VMCOREINFO_LENGTH (node_memblk,NR_NODE_MEMBLKS ); -VMCOREINFO_SIZE (node_memblk_s); +VMCOREINFO_STRUCT_SIZE (node_memblk_s);VMCOREINFO_OFFSET (node_memblk_s, start_paddr);VMCOREINFO_OFFSET (node_memblk_s, size);#endif
include/linux/kexec.h +3 -3
@@ -131,10 +131,10 @@ unsigned long paddr_vmcoreinfo_note(void vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)&name)#define VMCOREINFO_SIZE (name) \ vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \ - (unsigned long)sizeof(struct name)) -#define VMCOREINFO_TYPEDEF_SIZE (name) \ - vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \ (unsigned long)sizeof(name)) +#define VMCOREINFO_STRUCT_SIZE (name) \ + vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \ + (unsigned long)sizeof(struct name))#define VMCOREINFO_OFFSET (name, field) \ vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \ (unsigned long)&(((struct name *)0)->field))
kernel/kexec.c +7 -7
@@ -1376,15 +1376,15 @@ static int __init crash_save_vmcoreinfo_#ifdef CONFIG_SPARSEMEM VMCOREINFO_SYMBOL (mem_section);VMCOREINFO_LENGTH (mem_section,NR_SECTION_ROOTS ); -VMCOREINFO_SIZE (mem_section); +VMCOREINFO_STRUCT_SIZE (mem_section);VMCOREINFO_OFFSET (mem_section, section_mem_map);#endif -VMCOREINFO_SIZE (page); -VMCOREINFO_SIZE (pglist_data); -VMCOREINFO_SIZE (zone); -VMCOREINFO_SIZE (free_area); -VMCOREINFO_SIZE (list_head); -VMCOREINFO_TYPEDEF_SIZE (nodemask_t); +VMCOREINFO_STRUCT_SIZE (page); +VMCOREINFO_STRUCT_SIZE (pglist_data); +VMCOREINFO_STRUCT_SIZE (zone); +VMCOREINFO_STRUCT_SIZE (free_area); +VMCOREINFO_STRUCT_SIZE (list_head); +VMCOREINFO_SIZE (nodemask_t);VMCOREINFO_OFFSET (page, flags);VMCOREINFO_OFFSET (page, _count);VMCOREINFO_OFFSET (page, mapping);
_
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH 1/5] Rename vmcoreinfo's macros returning the size
Quoted 11 lines · Ken'ichi Ohmichi
VMCOREINFO_SIZE()should be renamedVMCOREINFO_STRUCT_SIZE()since it's always returning the size of the struct with a given name. This change would allowVMCOREINFO_TYPEDEF_SIZE()to simply becomeVMCOREINFO_SIZE()since it need not be used exclusively for typedefs.This discussion is the following:
http://www.ussg.iu.edu/hypermail/linux/kernel/0709.3/0582.htmlSigned-off-by Ken'ichi Ohmichi <[email protected]>Acked-by David Rientjes <[email protected]>
As far as name changes go, this one looks good to me.
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
PATCH 2/5 Use the existing offsetof() for VMCOREINFO_OFFSET()
In reply to a message not in the archiveIt is better that the existing offsetof() is used for VMCOREINFO_OFFSET().
This discussion is the following:
http://www.ussg.iu.edu/hypermail/linux/kernel/0709.3/0584.html
---
include/linux/kexec.h +1 -1
@@ -137,7 +137,7 @@ unsigned long paddr_vmcoreinfo_note(void (unsigned long)sizeof(struct name))#define VMCOREINFO_OFFSET (name, field) \ vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \ - (unsigned long)&(((struct name *)0)->field)) + (unsigned long)offsetof(struct name, field))#define VMCOREINFO_LENGTH (name, value) \ vmcoreinfo_append_str("LENGTH(%s)=%lu\n", #name, (unsigned long)value)#define VMCOREINFO_NUMBER (name) \
_
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH 2/5] Use the existing offsetof() for VMCOREINFO_OFFSET()
Quoted 7 lines · Ken'ichi Ohmichi
It is better that the existing
offsetof()is used forVMCOREINFO_OFFSET().This discussion is the following:
http://www.ussg.iu.edu/hypermail/linux/kernel/0709.3/0584.htmlSigned-off-by Ken'ichi Ohmichi <[email protected]>
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
PATCH 3/5 Add "VMCOREINFO_" to all the call for vmcoreinfo_append_str()
In reply to a message not in the archiveFor readability, all the calls to vmcoreinfo_append_str() are changed to macros having a prefix "VMCOREINFO_".
This discussion is the following:
http://www.ussg.iu.edu/hypermail/linux/kernel/0709.3/0584.html
---
include/linux/kexec.h +4 -0
@@ -127,6 +127,10 @@ void vmcoreinfo_append_str(const char *f __attribute__ ((format (printf, 1, 2)));unsigned long paddr_vmcoreinfo_note (void ); +#define VMCOREINFO_OSRELEASE (name) \ + vmcoreinfo_append_str("OSRELEASE=%s\n", #name) +#define VMCOREINFO_PAGESIZE (value) \ + vmcoreinfo_append_str("PAGESIZE=%ld\n", value)#define VMCOREINFO_SYMBOL (name) \ vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)&name)#define VMCOREINFO_SIZE (name) \
kernel/kexec.c +2 -2
@@ -1361,8 +1361,8 @@ unsigned long __attribute__ ((weak)) padstatic int __init crash_save_vmcoreinfo_init (void ) { -vmcoreinfo_append_str ("OSRELEASE=%s\n" , init_uts_ns.name.release); -vmcoreinfo_append_str ("PAGESIZE=%ld\n" ,PAGE_SIZE ); +VMCOREINFO_OSRELEASE (init_uts_ns.name.release); +VMCOREINFO_PAGESIZE (PAGE_SIZE );VMCOREINFO_SYMBOL (init_uts_ns);VMCOREINFO_SYMBOL (node_online_map);
_
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH 3/5] Add "VMCOREINFO_" to all the call for vmcoreinfo_append_str()
Quoted 8 lines · Ken'ichi Ohmichi
For readability, all the calls to
vmcoreinfo_append_str()are changed to macros having a prefix "VMCOREINFO_".This discussion is the following:
http://www.ussg.iu.edu/hypermail/linux/kernel/0709.3/0584.htmlSigned-off-by Ken'ichi Ohmichi <[email protected]>
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
PATCH 4/5 Fix the configuration dependencies
In reply to a message not in the archiveThis patch fixes the configuration dependencies in the vmcoreinfo data.
i386's "node_data" is defined in arch/x86/mm/discontig_32.c, and x86_64's one is defined in arch/x86/mm/numa_64.c. They depend on CONFIG_NUMA:
arch/x86/mm/Makefile_32:7
obj-$(CONFIG_NUMA) += discontig_32.o
arch/x86/mm/Makefile_64:7
obj-$(CONFIG_NUMA) += numa_64.oia64's "pgdat_list" is defined in arch/ia64/mm/discontig.c, and it depends on CONFIG_DISCONTIGMEM and CONFIG_SPARSEMEM:
arch/ia64/mm/Makefile:9-10
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
obj-$(CONFIG_SPARSEMEM) += discontig.oia64's "node_memblk" is defined in arch/ia64/mm/numa.c, and it depends on CONFIG_NUMA:
arch/ia64/mm/Makefile:8
obj-$(CONFIG_NUMA) += numa.o
---
arch/ia64/kernel/machine_kexec.c +3 -2
@@ -129,10 +129,11 @@ void machine_kexec(struct kimage *image)void arch_crash_save_vmcoreinfo (void ) { -#if defined(CONFIG_ARCH_DISCONTIGMEM_ENABLE ) && defined(CONFIG_NUMA ) +#if defined(CONFIG_DISCONTIGMEM ) || defined(CONFIG_SPARSEMEM )VMCOREINFO_SYMBOL (pgdat_list);VMCOREINFO_LENGTH (pgdat_list,MAX_NUMNODES ); - +#endif +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_memblk);VMCOREINFO_LENGTH (node_memblk,NR_NODE_MEMBLKS );VMCOREINFO_STRUCT_SIZE (node_memblk_s);
arch/x86/kernel/machine_kexec_32.c +1 -1
@@ -151,7 +151,7 @@ NORET_TYPE void machine_kexec(struct kimvoid arch_crash_save_vmcoreinfo (void ) { -#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_data);VMCOREINFO_LENGTH (node_data,MAX_NUMNODES );#endif
arch/x86/kernel/machine_kexec_64.c +1 -1
@@ -235,7 +235,7 @@ void arch_crash_save_vmcoreinfo(void) {VMCOREINFO_SYMBOL (init_level4_pgt); -#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_data);VMCOREINFO_LENGTH (node_data,MAX_NUMNODES );#endif
_
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Quoted 17 lines · Ken'ichi Ohmichi
This patch fixes the configuration dependencies in the vmcoreinfo data.
i386's "
node_data" is defined inarch/x86/mm/discontig_32.c, and x86_64's one is defined inarch/x86/mm/numa_64.c. They depend onCONFIG_NUMA:
arch/x86/mm/Makefile_32:7obj-$(CONFIG_NUMA) += discontig_32.o arch/x86/mm/Makefile_64:7 obj-$(CONFIG_NUMA) += numa_64.oia64's "
pgdat_list" is defined inarch/ia64/mm/discontig.c, and it depends onCONFIG_DISCONTIGMEMandCONFIG_SPARSEMEM:
arch/ia64/mm/Makefile:9-10obj-$(CONFIG_DISCONTIGMEM) += discontig.o obj-$(CONFIG_SPARSEMEM) += discontig.o
Quoted 6 lines
ia64's "
node_memblk" is defined inarch/ia64/mm/numa.c, and it depends onCONFIG_NUMA:
arch/ia64/mm/Makefile:8obj-$(CONFIG_NUMA) += numa.oSigned-off-by Ken'ichi Ohmichi <[email protected]>
This appears correct to me, checking through the symbols and the location of their deffinitions, though I have not had a chance to run many build checks.
I also note that CONFIG_ARCH_DISCONTIGMEM_ENABLE does not even appear to exist on i386, so it looks that without this change the code in question whould never be enabled.
Quoted 51 lines
---
diff -rpuNa/arch/ia64/kernel/machine_kexec.cb/arch/ia64/kernel/machine_kexec.carch/ia64/kernel/machine_kexec.c +3
-2@@ -129,10 +129,11 @@ void machine_kexec(struct kimage *image)void arch_crash_save_vmcoreinfo (void ) { -#if defined(CONFIG_ARCH_DISCONTIGMEM_ENABLE ) && defined(CONFIG_NUMA ) +#if defined(CONFIG_DISCONTIGMEM ) || defined(CONFIG_SPARSEMEM )VMCOREINFO_SYMBOL (pgdat_list);VMCOREINFO_LENGTH (pgdat_list,MAX_NUMNODES ); - +#endif +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_memblk);VMCOREINFO_LENGTH (node_memblk,NR_NODE_MEMBLKS );VMCOREINFO_STRUCT_SIZE (node_memblk_s);diff -rpuN
a/arch/x86/kernel/machine_kexec_32.cb/arch/x86/kernel/machine_kexec_32.carch/x86/kernel/machine_kexec_32.c +1
-1@@ -151,7 +151,7 @@ NORET_TYPE void machine_kexec(struct kimvoid arch_crash_save_vmcoreinfo (void ) { -#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_data);VMCOREINFO_LENGTH (node_data,MAX_NUMNODES );#endif diff -rpuN
a/arch/x86/kernel/machine_kexec_64.cb/arch/x86/kernel/machine_kexec_64.carch/x86/kernel/machine_kexec_64.c +1
-1@@ -235,7 +235,7 @@ void arch_crash_save_vmcoreinfo(void) {VMCOREINFO_SYMBOL (init_level4_pgt); -#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_data);VMCOREINFO_LENGTH (node_data,MAX_NUMNODES );#endif _
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Signature · 1 line
宝曼 西門 (ホウマン・サイモン) | Simon Horman (Horms)
Hi Simon,
Thank you for reviewing and your "Acked-by" signs.
Quoted 24 lines · Simon Horman
Quoted 16 lines · Ken'ichi Ohmichi
This patch fixes the configuration dependencies in the vmcoreinfo data.
i386's "
node_data" is defined inarch/x86/mm/discontig_32.c, and x86_64's one is defined inarch/x86/mm/numa_64.c. They depend onCONFIG_NUMA:
arch/x86/mm/Makefile_32:7obj-$(CONFIG_NUMA) += discontig_32.o arch/x86/mm/Makefile_64:7 obj-$(CONFIG_NUMA) += numa_64.oia64's "
pgdat_list" is defined inarch/ia64/mm/discontig.c, and it depends onCONFIG_DISCONTIGMEMandCONFIG_SPARSEMEM:
arch/ia64/mm/Makefile:9-10obj-$(CONFIG_DISCONTIGMEM) += discontig.o obj-$(CONFIG_SPARSEMEM) += discontig.oQuoted 6 lines
ia64's "
node_memblk" is defined inarch/ia64/mm/numa.c, and it depends onCONFIG_NUMA:
arch/ia64/mm/Makefile:8obj-$(CONFIG_NUMA) += numa.oSigned-off-by Ken'ichi Ohmichi <[email protected]>
Quoted 7 lines
This appears correct to me, checking through the symbols and the location of their deffinitions, though I have not had a chance to run many build checks.
I also note that
CONFIG_ARCH_DISCONTIGMEM_ENABLEdoes not even appear to exist on i386, so it looks that without this change the code in question whould never be enabled.
If you enable "Numa Memory Allocation and Scheduler Support" in i386's menuconfig, CONFIG_ARCH_DISCONTIGMEM_ENABLE is enabled.
Thanks
Ken'ichi Ohmichi
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Andrew Morton
maintainerQuoted 65 lines · On Fri, 16 Nov 2007 11:33:20 +0900 "Ken'ichi Ohmichi"…
This patch fixes the configuration dependencies in the vmcoreinfo data.
i386's "
node_data" is defined inarch/x86/mm/discontig_32.c, and x86_64's one is defined inarch/x86/mm/numa_64.c. They depend onCONFIG_NUMA:
arch/x86/mm/Makefile_32:7obj-$(CONFIG_NUMA) += discontig_32.o arch/x86/mm/Makefile_64:7 obj-$(CONFIG_NUMA) += numa_64.oia64's "
pgdat_list" is defined inarch/ia64/mm/discontig.c, and it depends onCONFIG_DISCONTIGMEMandCONFIG_SPARSEMEM:
arch/ia64/mm/Makefile:9-10obj-$(CONFIG_DISCONTIGMEM) += discontig.o obj-$(CONFIG_SPARSEMEM) += discontig.oia64's "
node_memblk" is defined inarch/ia64/mm/numa.c, and it depends onCONFIG_NUMA:
arch/ia64/mm/Makefile:8obj-$(CONFIG_NUMA) += numa.oSigned-off-by Ken'ichi Ohmichi <[email protected]>---
diff -rpuNa/arch/ia64/kernel/machine_kexec.cb/arch/ia64/kernel/machine_kexec.carch/ia64/kernel/machine_kexec.c +3
-2@@ -129,10 +129,11 @@ void machine_kexec(struct kimage *image)void arch_crash_save_vmcoreinfo (void ) { -#if defined(CONFIG_ARCH_DISCONTIGMEM_ENABLE ) && defined(CONFIG_NUMA ) +#if defined(CONFIG_DISCONTIGMEM ) || defined(CONFIG_SPARSEMEM )VMCOREINFO_SYMBOL (pgdat_list);VMCOREINFO_LENGTH (pgdat_list,MAX_NUMNODES ); - +#endif +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_memblk);VMCOREINFO_LENGTH (node_memblk,NR_NODE_MEMBLKS );VMCOREINFO_STRUCT_SIZE (node_memblk_s);diff -rpuN
a/arch/x86/kernel/machine_kexec_32.cb/arch/x86/kernel/machine_kexec_32.carch/x86/kernel/machine_kexec_32.c +1
-1@@ -151,7 +151,7 @@ NORET_TYPE void machine_kexec(struct kimvoid arch_crash_save_vmcoreinfo (void ) { -#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_data);VMCOREINFO_LENGTH (node_data,MAX_NUMNODES );#endif diff -rpuN
a/arch/x86/kernel/machine_kexec_64.cb/arch/x86/kernel/machine_kexec_64.carch/x86/kernel/machine_kexec_64.c +1
-1@@ -235,7 +235,7 @@ void arch_crash_save_vmcoreinfo(void) {VMCOREINFO_SYMBOL (init_level4_pgt); -#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_data);VMCOREINFO_LENGTH (node_data,MAX_NUMNODES );#endif
Quoted 2 lines
_
x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2.patch removes the `VMCOREINFO_SYMBOL(node_data);' from arch/x86/kernel/machine_kexec_64.c altogether, so I dropped that part of your patch.
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Hi Andrew,
Quoted 7 lines · Andrew Morton
Quoted 7 lines
diff -rpuN
a/arch/x86/kernel/machine_kexec_64.cb/arch/x86/kernel/machine_kexec_64.carch/x86/kernel/machine_kexec_64.c +0
-0@@ -235,7 +235,7 @@ void arch_crash_save_vmcoreinfo(void) {VMCOREINFO_SYMBOL (init_level4_pgt);
Quoted 11 lines
Quoted 7 lines
arch/x86/kernel/machine_kexec_64.c +1
-1-#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE +#ifdef CONFIG_NUMA VMCOREINFO_SYMBOL (node_data);VMCOREINFO_LENGTH (node_data,MAX_NUMNODES );#endif _
x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2.patch removes the `VMCOREINFO_SYMBOL(node_data);' from
arch/x86/kernel/machine_kexec_64.caltogether, so I dropped that part of your patch.
The above part is necessary for a NUMA kernel.
Could you please merge the attached patch ?
I guess that Christoph Lameter deleted the above part (which is added by the attached patch again) with the other part of discontigmem lines, because it depended on CONFIG_ARCH_DISCONTIGMEM_ENABLE.
But the dependency was wrong, and it should depend on CONFIG_NUMA. The part is necessary for a NUMA kernel even if sparsemem.
Thanks
Ken'ichi Ohmichi
---
---
arch/x86/kernel/machine_kexec_64.c +5 -0
@@ -234,5 +234,10 @@ NORET_TYPE void machine_kexec(struct kimvoid arch_crash_save_vmcoreinfo (void ) {VMCOREINFO_SYMBOL (init_level4_pgt); + +#ifdef CONFIG_NUMA +VMCOREINFO_SYMBOL (node_data); +VMCOREINFO_LENGTH (node_data,MAX_NUMNODES ); +#endif }
_
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Christoph Lameter
Acked-byQuoted 5 lines · Ken'ichi Ohmichi
I guess that Christoph Lameter deleted the above part (which is added by the attached patch again) with the other part of discontigmem lines, because it depended on
CONFIG_ARCH_DISCONTIGMEM_ENABLE.
But the dependency was wrong, and it should depend onCONFIG_NUMA. The part is necessary for a NUMA kernel even if sparsemem.
PATCH 5/5 Add the array length of "free_list" for filtering free pages
In reply to a message not in the archiveThis patch adds the array length of "free_area.free_list" to the vmcoreinfo data so that makedumpfile (dump filtering command) can exclude all free pages in linux-2.6.24.
makedumpfile creates a small dumpfile by excluding unnecessary pages for the analysis. To distinguish unnecessary pages, makedumpfile gets the vmcoreinfo data which has the minimum debugging information only for dump filtering.
In 2.6.24-rc1 or later, the free_area.free_list is an array which has one list for each migrate types instead of a single list. makedumpfile needs the array length of "free_area.free_list" and the vmcoreinfo data should contain it.
---
kernel/kexec.c +1 -0
@@ -1404,6 +1404,7 @@ static int __init crash_save_vmcoreinfo_VMCOREINFO_OFFSET (list_head, next);VMCOREINFO_OFFSET (list_head, prev);VMCOREINFO_LENGTH (zone.free_area,MAX_ORDER ); +VMCOREINFO_LENGTH (free_area.free_list,MIGRATE_TYPES );VMCOREINFO_NUMBER (NR_FREE_PAGES );arch_crash_save_vmcoreinfo ();
_
_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
Re: [PATCH 5/5] Add the array length of "free_list" for filtering free pages
Quoted 9 lines · Ken'ichi Ohmichi
This patch adds the array length of "free_area.free_list" to the vmcoreinfo data so that makedumpfile (dump filtering command) can exclude all free pages in linux-2.6.24.
makedumpfile creates a small dumpfile by excluding unnecessary pages for the analysis. To distinguish unnecessary pages, makedumpfile gets the vmcoreinfo data which has the minimum debugging information only for dump filtering.
Quoted 7 lines
In 2.6.24-rc1 or later, the free_area.free_list is an array which has one list for each migrate types instead of a single list. makedumpfile needs the array length of "free_area.free_list" and the vmcoreinfo data should contain it.
Signed-off-by Huang Ying <[email protected]>Tested-by Ken'ichi Ohmichi <[email protected]>
This seems fine to me. Though from a point of maintainability would it be better if VMCOREINFO_LENGTH derived the length from the element of the type in question. Just a thought, I haven't hacked it up to see how practical it might be.