ACPI: disable stray GPE, prevent ACPI interrupt storm
Len Brown
reviewerBob,
Rui's Linux patch below modifies an ACPICA file.
thanks,
-Len
commit a7f9b1f24974da287771e2d70b30d9ca7bd66684
Author: Zhang Rui <[email protected]> Date: Tue Nov 20 13:38:59 2007 -0500
ACPI: disable stray GPE, prevent ACPI interrupt storm
GPEs are disabled depending on their type -- WAKE, WAKE_RUN, and RUNTIME. An error is returned if we are asked to disable a GPE that has no type.
But at least one system exists that enables a GPE from AML that is not the EC GPE, and has no _Lxx/_Exx AML handler, and is thus never initialized.
In this case, when an external CRT is plugged in, the GPE fires, we attempt to disable the GPE,
but instead just return an error.
So the GPE stays asserted and an ACPI interrupt storm follows.
The fix is to disable a firing GPE,
even if it comes from outer space.
http://bugzilla.kernel.org/show_bug.cgi?id=6217
drivers/acpi/events/evgpe.c +4 -4
@@ -270,18 +270,18 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)case ACPI_GPE_TYPE_WAKE_RUN :ACPI_CLEAR_BIT (gpe_event_info->flags,ACPI_GPE_WAKE_ENABLED ); -/*lint -fallthrough */ +/* fallthrough */ case ACPI_GPE_TYPE_RUNTIME :/* Disable the requested runtime GPE */ ACPI_CLEAR_BIT (gpe_event_info->flags,ACPI_GPE_RUN_ENABLED ); - status =acpi_hw_write_gpe_enable_reg (gpe_event_info); -break ; + +/* fallthrough */ default : -return_ACPI_STATUS (AE_BAD_PARAMETER ); +acpi_hw_write_gpe_enable_reg (gpe_event_info); }return_ACPI_STATUS (AE_OK );
Ok
/*lint -fallthrough */
Our lint needs this
Quoted 46 lines
-----Original Message-----
From: Len Brown [mailto:[email protected]]
Sent: Tuesday, November 20, 2007 10:43 AM
To: Moore, Robert
Cc: [email protected]; Zhang, Rui; Alexey Starikovskiy
Subject: ACPI: disable stray GPE, prevent ACPI interrupt stormBob,
Rui's Linux patch below modifies an ACPICA file.thanks,
-Lencommit
a7f9b1f24974da287771e2d70b30d9ca7bd66684Author: Zhang Rui <[email protected]> Date: Tue Nov 20 13:38:59 2007 -0500ACPI: disable stray GPE, prevent ACPI interrupt storm
GPEs are disabled depending on their type -- WAKE,
WAKE_RUN, and RUNTIME. An error is returned if we are asked to disable a GPE that has no type.But at least one system exists that enables a GPE from AML that is not the EC GPE, and has no _Lxx/_Exx AML handler, and is thus never initialized.
In this case, when an external CRT is plugged in, the GPE fires, we attempt to disable the GPE,
but instead just return an error.
So the GPE stays asserted and an ACPI interrupt storm follows.The fix is to disable a firing GPE,
even if it comes from outer space.http://bugzilla.kernel.org/show_bug.cgi?id=6217
Signed-off-by Zhang Rui <[email protected]>Signed-off-by Len Brown <[email protected]>drivers/acpi/events/evgpe.c +0
-0
drivers/acpi/events/evgpe.c acpi_status acpi_ev_disable_gpe(struct · line 272
Quoted 3 lines
drivers/acpi/events/evgpe.c +0
-0@@ -270,18 +270,18 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)case ACPI_GPE_TYPE_WAKE_RUN : ACPI_CLEAR_BIT(gpe_event_info->flags,
ACPI_GPE_WAKE_ENABLED);
drivers/acpi/events/evgpe.c acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
Quoted 9 lines
drivers/acpi/events/evgpe.c +1
-1-/*lint -fallthrough */ +/* fallthrough */ case ACPI_GPE_TYPE_RUNTIME :/* Disable the requested runtime GPE */ ACPI_CLEAR_BIT(gpe_event_info->flags,
ACPI_GPE_RUN_ENABLED);
Quoted 11 lines
drivers/acpi/events/evgpe.c +3
-3- status =acpi_hw_write_gpe_enable_reg (gpe_event_info); -break ; + +/* fallthrough */ default : -return_ACPI_STATUS (AE_BAD_PARAMETER ); +acpi_hw_write_gpe_enable_reg (gpe_event_info); }return_ACPI_STATUS (AE_OK );
BTW, this kind of change begs for a comment, how about:
default:
/*
* Even if we don't know the GPE type, make sure that we always
* disable it. This can prevent a certain type of GPE flood,
where
* the GPE has no _Lxx/_Exx method, and it cannot be determined
* whether the GPE is wake, run, or wake/run.
*/
Status = AcpiHwWriteGpeEnableReg (GpeEventInfo);
break;Quoted 46 lines
-----Original Message-----
From: Len Brown [mailto:[email protected]]
Sent: Tuesday, November 20, 2007 10:43 AM
To: Moore, Robert
Cc: [email protected]; Zhang, Rui; Alexey Starikovskiy
Subject: ACPI: disable stray GPE, prevent ACPI interrupt stormBob,
Rui's Linux patch below modifies an ACPICA file.thanks,
-Lencommit
a7f9b1f24974da287771e2d70b30d9ca7bd66684Author: Zhang Rui <[email protected]> Date: Tue Nov 20 13:38:59 2007 -0500ACPI: disable stray GPE, prevent ACPI interrupt storm
GPEs are disabled depending on their type -- WAKE,
WAKE_RUN, and RUNTIME. An error is returned if we are asked to disable a GPE that has no type.But at least one system exists that enables a GPE from AML that is not the EC GPE, and has no _Lxx/_Exx AML handler, and is thus never initialized.
In this case, when an external CRT is plugged in, the GPE fires, we attempt to disable the GPE,
but instead just return an error.
So the GPE stays asserted and an ACPI interrupt storm follows.The fix is to disable a firing GPE,
even if it comes from outer space.http://bugzilla.kernel.org/show_bug.cgi?id=6217
Signed-off-by Zhang Rui <[email protected]>Signed-off-by Len Brown <[email protected]>drivers/acpi/events/evgpe.c +0
-0
drivers/acpi/events/evgpe.c acpi_status acpi_ev_disable_gpe(struct · line 272
Quoted 3 lines
drivers/acpi/events/evgpe.c +0
-0@@ -270,18 +270,18 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)case ACPI_GPE_TYPE_WAKE_RUN : ACPI_CLEAR_BIT(gpe_event_info->flags,
ACPI_GPE_WAKE_ENABLED);
drivers/acpi/events/evgpe.c acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
Quoted 9 lines
drivers/acpi/events/evgpe.c +1
-1-/*lint -fallthrough */ +/* fallthrough */ case ACPI_GPE_TYPE_RUNTIME :/* Disable the requested runtime GPE */ ACPI_CLEAR_BIT(gpe_event_info->flags,
ACPI_GPE_RUN_ENABLED);
Quoted 11 lines
drivers/acpi/events/evgpe.c +3
-3- status =acpi_hw_write_gpe_enable_reg (gpe_event_info); -break ; + +/* fallthrough */ default : -return_ACPI_STATUS (AE_BAD_PARAMETER ); +acpi_hw_write_gpe_enable_reg (gpe_event_info); }return_ACPI_STATUS (AE_OK );
Quoted 2 lines · Robert
BTW, this kind of change begs for a comment
Sounds good. :)
Thanks,
Rui
Quoted 84 lines
default:
/*
* Even if we don't know the GPE type, make sure that we always
* disable it. This can prevent a certain type of GPE flood,
where* the GPE has no _Lxx/_Exx method, and it cannot be determined * whether the GPE is wake, run, or wake/run. */ Status = AcpiHwWriteGpeEnableReg (GpeEventInfo); break;Quoted 46 lines
-----Original Message-----
From: Len Brown [mailto:[email protected]]
Sent: Tuesday, November 20, 2007 10:43 AM
To: Moore, Robert
Cc: [email protected]; Zhang, Rui; Alexey Starikovskiy
Subject: ACPI: disable stray GPE, prevent ACPI interrupt stormBob,
Rui's Linux patch below modifies an ACPICA file.thanks,
-Lencommit
a7f9b1f24974da287771e2d70b30d9ca7bd66684Author: Zhang Rui <[email protected]> Date: Tue Nov 20 13:38:59 2007 -0500ACPI: disable stray GPE, prevent ACPI interrupt storm
GPEs are disabled depending on their type -- WAKE,
WAKE_RUN, and RUNTIME. An error is returned if we are asked to disable a GPE that has no type.But at least one system exists that enables a GPE from AML that is not the EC GPE, and has no _Lxx/_Exx AML handler, and is thus never initialized.
In this case, when an external CRT is plugged in, the GPE fires, we attempt to disable the GPE,
but instead just return an error.
So the GPE stays asserted and an ACPI interrupt storm follows.The fix is to disable a firing GPE,
even if it comes from outer space.http://bugzilla.kernel.org/show_bug.cgi?id=6217
Signed-off-by Zhang Rui <[email protected]>Signed-off-by Len Brown <[email protected]>drivers/acpi/events/evgpe.c +0
-0drivers/acpi/events/evgpe.c acpi_status acpi_ev_disable_gpe(struct · line 272
Quoted 3 lines
drivers/acpi/events/evgpe.c +0
-0@@ -270,18 +270,18 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)case ACPI_GPE_TYPE_WAKE_RUN : ACPI_CLEAR_BIT(gpe_event_info->flags,
ACPI_GPE_WAKE_ENABLED);drivers/acpi/events/evgpe.c acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
Quoted 9 lines
drivers/acpi/events/evgpe.c +1
-1-/*lint -fallthrough */ +/* fallthrough */ case ACPI_GPE_TYPE_RUNTIME :/* Disable the requested runtime GPE */ ACPI_CLEAR_BIT(gpe_event_info->flags,
ACPI_GPE_RUN_ENABLED);Quoted 11 lines
drivers/acpi/events/evgpe.c +3
-3- status =acpi_hw_write_gpe_enable_reg (gpe_event_info); -break ; + +/* fallthrough */ default : -return_ACPI_STATUS (AE_BAD_PARAMETER ); +acpi_hw_write_gpe_enable_reg (gpe_event_info); }return_ACPI_STATUS (AE_OK );
I don't understand why the GPE was enabled in the first place.
GPEs start out all disabled. They only get enabled if an _Lxx/_Exx method is found.
I'm all for defensive programming (if all else fails...), but I'm worried that there is a bug somewhere else that is accidentally enabling this GPE.
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
But at least one system exists that enables a GPE from AML that is not the EC GPE, and has no _Lxx/_Exx AML handler, and is thus never initialized.
Yes, it should be "initialized". All GPEs are disabled by default.
Please check this out.
Thanks,
Bob
Quoted 8 lines
-----Original Message-----
From: Zhang, Rui
Sent: Tuesday, November 20, 2007 5:33 PM
To: Moore, Robert
Cc: Len Brown; [email protected]; Alexey Starikovskiy
Subject: RE: ACPI: disable stray GPE, prevent ACPI interrupt storm
Quoted 10 lines
Quoted 2 lines · Robert
BTW, this kind of change begs for a comment
Sounds good. :)
Thanks,
RuiQuoted 3 lines
default:
/*
* Even if we don't know the GPE type, make sure that we
always
Quoted 3 lines
Quoted 3 lines
* disable it. This can prevent a certain type of GPE flood,
where
* the GPE has no _Lxx/_Exx method, and it cannot be
determined
Quoted 42 lines
Quoted 42 lines
* whether the GPE is wake, run, or wake/run. */ Status = AcpiHwWriteGpeEnableReg (GpeEventInfo); break;Quoted 35 lines
-----Original Message-----
From: Len Brown [mailto:[email protected]]
Sent: Tuesday, November 20, 2007 10:43 AM
To: Moore, Robert
Cc: [email protected]; Zhang, Rui; Alexey Starikovskiy
Subject: ACPI: disable stray GPE, prevent ACPI interrupt stormBob,
Rui's Linux patch below modifies an ACPICA file.thanks,
-Lencommit
a7f9b1f24974da287771e2d70b30d9ca7bd66684Author: Zhang Rui <[email protected]> Date: Tue Nov 20 13:38:59 2007 -0500ACPI: disable stray GPE, prevent ACPI interrupt storm
GPEs are disabled depending on their type -- WAKE,
WAKE_RUN, and RUNTIME. An error is returned if we are asked to disable a GPE that has no type.But at least one system exists that enables a GPE from AML that is not the EC GPE, and has no _Lxx/_Exx AML handler, and is thus never initialized.
In this case, when an external CRT is plugged in, the GPE fires, we attempt to disable the GPE,
but instead just return an error.
So the GPE stays asserted and an ACPI interrupt storm follows.The fix is to disable a firing GPE,
even if it comes from outer space.
Quoted 7 lines
Quoted 7 lines
Review
Quoted 7 lines
http://bugzilla.kernel.org/show_bug.cgi?id=6217
Signed-off-by Zhang Rui <[email protected]>Signed-off-by Len Brown <[email protected]>(quoted diff) +0
-0
b/drivers/acpi/events/evgpe.c
Quoted 29 lines
Quoted 29 lines
drivers/acpi/events/evgpe.c acpi_status acpi_ev_disable_gpe(struct · line 272
Quoted 7 lines
index e22f4a9..056b788 100644
drivers/acpi/events/evgpe.c +0
-0@@ -270,18 +270,18 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)case ACPI_GPE_TYPE_WAKE_RUN : ACPI_CLEAR_BIT(gpe_event_info->flags,
ACPI_GPE_WAKE_ENABLED);drivers/acpi/events/evgpe.c acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
Quoted 9 lines
drivers/acpi/events/evgpe.c +1
-1-/*lint -fallthrough */ +/* fallthrough */ case ACPI_GPE_TYPE_RUNTIME :/* Disable the requested runtime GPE */ ACPI_CLEAR_BIT(gpe_event_info->flags,
ACPI_GPE_RUN_ENABLED);Quoted 11 lines
drivers/acpi/events/evgpe.c +3
-3- status =acpi_hw_write_gpe_enable_reg (gpe_event_info); -break ; + +/* fallthrough */ default : -return_ACPI_STATUS (AE_BAD_PARAMETER ); +acpi_hw_write_gpe_enable_reg (gpe_event_info); }return_ACPI_STATUS (AE_OK );