add support for Kore controller 2

index 14e8e32..7d25f4b 100644
@@ -288,6 +288,7 @@ int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev)
 		break;
 
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
 		for (i = 0; i < ARRAY_SIZE(kore_controller); i++) {
 			struct caiaq_controller *c = kore_controller + i;
 			kcontrol_template.name = c->name;

index dc2e7f7..48c6bed 100644
@@ -43,11 +43,12 @@
 #endif
 
 MODULE_AUTHOR("Daniel Mack <[email protected]>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.0");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.1");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
 			 "{Native Instruments, Kore Controller},"
+			 "{Native Instruments, Kore Controller 2},"
 			 "{Native Instruments, Audio Kontrol 1}"
 			 "{Native Instruments, Audio 8 DJ}}");
 

@@ -96,6 +97,11 @@ static struct usb_device_id snd_usb_id_table[] = {
 		.idProduct =	USB_PID_KORECONTROLLER
 	},
 	{
+		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =	USB_VID_NATIVEINSTRUMENTS,
+		.idProduct =	USB_PID_KORECONTROLLER2
+	},
+	{
 		.match_flags =  USB_DEVICE_ID_MATCH_DEVICE,
 		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
 		.idProduct =    USB_PID_AK1

@@ -291,13 +297,21 @@ static void setup_card(struct snd_usb_caiaqdev *dev)
 		break;
 	}
 	
-	ret = snd_usb_caiaq_audio_init(dev);
-	if (ret < 0)
-		log("Unable to set up audio system (ret=%d)\n", ret);
+	if (dev->spec.num_analog_audio_out +
+	    dev->spec.num_analog_audio_in +
+	    dev->spec.num_digital_audio_out +
+	    dev->spec.num_digital_audio_in > 0) {
+		ret = snd_usb_caiaq_audio_init(dev);
+		if (ret < 0)
+			log("Unable to set up audio system (ret=%d)\n", ret);
+	}
 	
-	ret = snd_usb_caiaq_midi_init(dev);
-	if (ret < 0)
-		log("Unable to set up MIDI system (ret=%d)\n", ret);
+	if (dev->spec.num_midi_in +
+	    dev->spec.num_midi_out > 0) {
+		ret = snd_usb_caiaq_midi_init(dev);
+		if (ret < 0)
+			log("Unable to set up MIDI system (ret=%d)\n", ret);
+	}
 
 #ifdef CONFIG_SND_USB_CAIAQ_INPUT
 	ret = snd_usb_caiaq_input_init(dev);

index 310b10e..96a4913 100644
@@ -8,6 +8,7 @@
 #define USB_PID_RIGKONTROL2	0x1969
 #define USB_PID_RIGKONTROL3	0x1940
 #define USB_PID_KORECONTROLLER	0x4711
+#define USB_PID_KORECONTROLLER2	0x4712
 #define USB_PID_AK1		0x0815
 #define USB_PID_AUDIO8DJ	0x1978
 

index ded45e5..e6c410a 100644
@@ -162,6 +162,7 @@ static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *dev,
 		input_sync(input_dev);
 		break;
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
 		input_report_abs(input_dev, ABS_X, (buf[0] << 8) | buf[1]);
 		input_report_abs(input_dev, ABS_Y, (buf[2] << 8) | buf[3]);
 		input_report_abs(input_dev, ABS_Z, (buf[4] << 8) | buf[5]);

@@ -183,6 +184,7 @@ static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev,
 		input_sync(input_dev);
 		break;
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
 		i = decode_erp(buf[7], buf[5]);
 		input_report_abs(input_dev, ABS_HAT0X, i);
 		i = decode_erp(buf[12], buf[14]);

@@ -223,7 +225,9 @@ static void snd_caiaq_input_read_io(struct snd_usb_caiaqdev *dev,
 				 buf[i / 8] & (1 << (i % 8)));
 
 	if (dev->chip.usb_id ==
-	    USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER))
+		USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER) ||
+	    dev->chip.usb_id ==
+		USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2))
 		input_report_abs(dev->input_dev, ABS_MISC, 255 - buf[4]);
 
 	input_sync(input_dev);

@@ -302,6 +306,7 @@ int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev)
 		snd_usb_caiaq_set_auto_msg(dev, 1, 0, 5);
 		break;
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
 		input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 		input->absbit[0] = BIT_MASK(ABS_HAT0X) | BIT_MASK(ABS_HAT0Y) |
 				   BIT_MASK(ABS_HAT1X) | BIT_MASK(ABS_HAT1Y) |