Skip to contentSkip to conversation

sh: Update Makefile

PATCH New Nobuhiro Iwamatsu 2 participants 6 messages Nov 24, 2007 – Nov 27, 2007 Kbuild

lore
Share & tools
lore

Nobuhiro Iwamatsu

author
#0 lore raw

PATCH 1/1 sh: Update Makefile

From: Nobuhiro Iwamatsu <[email protected]>

Add support MS7722SE01 to Makefile.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>
---
 Makefile |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)
Makefile +5 -0
index 9ae11e2..86bc753 100644
@@ -2603,6 +2603,11 @@ ms7750se_config: unconfig
 	@echo "#define CONFIG_MS7750SE 1" >> include/config.h
 	@./mkconfig -a $(@:_config=) sh sh4 ms7750se
 
+ms7722se_config :       unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_MS7722SE 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 ms7722se
+
 #########################################################################
 #########################################################################
 #########################################################################
Signature · 1 line
1.5.3.5
#1 lore raw

PATCH 1/1 sh: Update Makefile

Quoted 15 lines · Nobuhiro Iwamatsu

From: Nobuhiro Iwamatsu <[email protected]>

Add support MS7722SE01 to Makefile.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>
---
 Makefile |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)
Makefile +0 -0
index 9ae11e2..86bc753 100644
@@ -2603,6 +2603,11 @@ ms7750se_config: unconfig
 	@echo "#define CONFIG_MS7750SE 1" >> include/config.h

Makefile ms7750se_config: unconfig · line 2613

Quoted 10 lines
Makefile +5 -0
 	@./mkconfig -a $(@:_config=) sh sh4 ms7750se
 
+ms7722se_config :       unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_MS7722SE 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 ms7722se
+
 #########################################################################
 #########################################################################
 #########################################################################

I think you'd create the SH arch into Makefile and add your board.

Best Regards,
J.

Quoted 11 lines
Signature · 10 lines
1.5.3.5

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
author
#2 lore raw

PATCH 1/1 sh: Update Makefile

Hello,

Thank you for your comments.

Quoted 18 lines · On Sat, 24 Nov 2007 22:17:25 +0100 Jean-Christophe PLAGNIOL-VILLARD…
Quoted 17 lines · Nobuhiro Iwamatsu

From: Nobuhiro Iwamatsu <[email protected]>

Add support MS7722SE01 to Makefile.

Signed-off-by Nobuhiro Iwamatsu <[email protected]>
---
 Makefile |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)
Makefile +0 -0
index 9ae11e2..86bc753 100644
@@ -2603,6 +2603,11 @@ ms7750se_config: unconfig
 	@echo "#define CONFIG_MS7750SE 1" >> include/config.h
 	@./mkconfig -a $(@:_config=) sh sh4 ms7750se
Quoted 9 lines

Makefile ms7750se_config: unconfig · line 2613

Quoted 8 lines
Makefile +5 -0
+ms7722se_config :       unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_MS7722SE 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 ms7722se
+
 #########################################################################
 #########################################################################
 #########################################################################

I think you'd create the SH arch into Makefile and add your board.

I'm sorry.
I don't understand you wrote. Could you teach in detail?

regards,
Nobuhiro

Signature · 5 lines
Nobuhiro Iwamatsu
	iwamatsu at nigauri.org
	iwamatsu at debian.or.jp

	GPG ID : 3170EBE9
#3 lore raw

PATCH 1/1 sh: Update Makefile

Quoted 14 lines · Nobuhiro Iwamatsu

Hello,

Thank you for your comments.

Quoted 7 lines · On Sat, 24 Nov 2007 22:17:25 +0100 Jean-Christophe PLAGNIOL-VILLARD…

Review

Quoted 6 lines
(quoted diff) +3 -0
+	@echo "#define CONFIG_MS7722SE 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 ms7722se
+
 #########################################################################
 #########################################################################
 #########################################################################

I think you'd create the SH arch into Makefile and add your board.

A typo

I think you'd create the SH arch into MAKEALL and add your board.

I join the patch

Best Regards,
J.

Quoted 11 lines

I'm sorry.
I don't understand you wrote. Could you teach in detail?

regards,
Nobuhiro

Signature · 5 lines
Nobuhiro Iwamatsu
	iwamatsu at nigauri.org
	iwamatsu at debian.or.jp

	GPG ID : 3170EBE9

-------------- next part --------------

MAKEALL +19 -1
index a02412b..c83bc5b 100755
@@ -655,6 +655,22 @@ LIST_blackfin="		\
 	bf561-ezkit	\
 "
 
+#########################################################################
+## SH Systems
+#########################################################################
+
+LIST_sh4="		\
+	ms7722se	\
+"
+
+LIST_sh3=""
+
+
+LIST_sh="		\
+	${LIST_sh3}	\
+	${LIST_sh4}	\
+"
+
 #-----------------------------------------------------------------------
 
 #----- for now, just run PPC by default -----

@@ -689,7 +705,9 @@ do
 	mips|mips_el| \
 	nios|nios2| \
 	ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \
-	x86|I486|TSEC)
+	x86|I486|TSEC| \
+	sh|sh4|sh3 \
+	)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
author
#4 lore raw

PATCH 1/1 sh: Update Makefile

Hello,

On Mon, 26 Nov 2007 17:24:00 +0100
Jean-Christophe PLAGNIOL-VILLARD <[email protected]> wrote:

##

Quoted 6 lines
Quoted 1 line
Quoted 1 line

I think you'd create the SH arch into Makefile and add your board.

A typo

I think you'd create the SH arch into MAKEALL and add your board.

I join the patch

Oh, OK.?I did not notice it.
Thank you.
Could you resend the patch adding "Signed-off-by"?

regards,
Nobuhiro

Signature · 5 lines
Nobuhiro Iwamatsu
	hemamu at t-base.ne.jp
	iwamatsu at debian.or.jp

	GPG ID : 3170EBE9
#5 lore raw

PATCH 1/1 sh: Add sh3 and sh4 support in MAKEALL

Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
MAKEALL +19 -1
index a02412b..c83bc5b 100755
@@ -655,6 +655,22 @@ LIST_blackfin="		\
 	bf561-ezkit	\
 "
 
+#########################################################################
+## SH Systems
+#########################################################################
+
+LIST_sh4="		\
+	ms7722se	\
+"
+
+LIST_sh3=""
+
+
+LIST_sh="		\
+	${LIST_sh3}	\
+	${LIST_sh4}	\
+"
+
 #-----------------------------------------------------------------------
 
 #----- for now, just run PPC by default -----

@@ -689,7 +705,9 @@ do
 	mips|mips_el| \
 	nios|nios2| \
 	ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx| \
-	x86|I486|TSEC)
+	x86|I486|TSEC| \
+	sh|sh4|sh3 \
+	)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
Signature · 1 line
1.5.3.2