2.6.24-rc3-mm1

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/

- Added new git tree git-lblnet.patch: net labelling work (Paul Moore <[email protected])

- Re-added Smack

- Dropped git-kbuild.patch - it broke the scsi build

- I'm offline until Sunday (as are certain other patch targets..)

Boilerplate:

- See the `hot-fixes' directory for any important updates to this patchset.

- To fetch an -mm tree using git, use (for example)

git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1 git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1

- -mm kernel commit activity can be reviewed by subscribing to the mm-commits mailing list.

echo "subscribe mm-commits" | mail [email protected]

- If you hit a bug in -mm and it is not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at

http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt

But beware that this process takes some time (around ten rebuilds and reboots), so consider reporting the bug first and if we cannot immediately identify the faulty patch, then perform the bisection search.

- When reporting bugs, please try to Cc: the relevant maintainer and mailing list on any email.

- When reporting bugs in this kernel via email, please also rewrite the email Subject: in some manner to reflect the nature of the bug. Some developers filter by Subject: when looking for messages to read.

- Occasional snapshots of the -mm lineup are uploaded to ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on the mm-commits list. These probably are at least compilable.

- More-than-daily -mm snapshots may be found at
http://userweb.kernel.org/~akpm/mmotm/. These are almost certainly not compileable.

Changes since 2.6.24-rc2-mm1:

origin.patch
git-acpi.patch
git-alsa.patch
git-arm-master.patch
git-arm.patch
git-avr32.patch
git-cifs.patch
git-cpufreq.patch
git-powerpc.patch
git-drm.patch
git-dvb.patch
git-hwmon.patch
git-gfs2-nmw.patch
git-hid.patch
git-hrt.patch
git-ieee1394.patch
git-infiniband.patch
git-input.patch
git-jfs.patch
git-kvm.patch
git-lblnet.patch
git-leds.patch
git-libata-all.patch
git-m32r.patch
git-md-accel.patch
git-mips.patch
git-mmc.patch
git-mtd.patch
git-ubi.patch
git-net.patch
git-netdev-all.patch
git-nfsd.patch
git-ocfs2.patch
git-parisc.patch
git-selinux.patch
git-s390.patch
git-sh.patch
git-scsi-misc.patch
git-scsi-rc-fixes.patch
git-sparc64.patch
git-unionfs.patch
git-v9fs.patch
git-watchdog.patch
git-wireless.patch
git-ipwireless_cs.patch
git-x86.patch
git-newsetup.patch
git-xfs.patch
git-cryptodev.patch
git-xtensa.patch

git trees

-ecryptfs-cast-page-index-to-loff_t-instead-of-off_t.patch -fix-oops-in-toshiba_acpi-error-return-path.patch
-rtc_hctosys-expects-rtcs-in-utc-doc.patch
-rtcs-handle-nvram-better.patch
-rtc-ds1307-exports-nvram.patch
-drivers-video-ps3fb-fix-memset-size-error.patch
-w1-fix-memset-size-error.patch
-slab-fix-typo-in-allocation-failure-handling.patch
-serial-add-pnp-id-for-davicom-isa-336k-modem.patch -sysctl-check-length-at-deprecated_sysctl_warning.patch
-cm40x0_csc-fix-debug-macros.patch
-lib-move-bitmapo-from-lib-y-to-obj-y.patch
-uml-fix-symlink-loops.patch
-rtc-tweak-driver-documentation-for-rtc-periodic.patch
-chipsfb-uses-depends-on-pci.patch
-uvesafb-fix-warnings-about-unused-variables-on-non-x86.patch -oprofile-oops-when-profile_pc-return-0lu.patch
-uml-fix-recvmsg-return-value-checking.patch
-uml-update-address-space-affected-by-pud_clear.patch -uml-update-address-space-affected-by-pud_clear-checkpatch-fixes.patch
-improve-cgroup-printks.patch
-improve-cgroup-printks-fix.patch
-drivers-video-s1d13xxxfbc-as-module-with-dbg.patch -forbid-user-to-change-file-flags-on-quota-files.patch -forbid-user-to-change-file-flags-on-quota-files-fix.patch -lxfb-use-the-correct-msr-number-for-panel-support.patch
-lguest_userc-fix-memory-leak.patch
-video-sis-fix-negative-array-index.patch
-8250_pnp-add-support-for-lg-c1-express-dual-machines.patch -proc-fix-proc_kill_inodes-to-kill-dentries-on-all-proc-superblocks.patch -proc-fix-proc_kill_inodes-to-kill-dentries-on-all-proc-superblocks-checkpatch-fixes.patch -migration-find-correct-vma-in-new_vma_page.patch -memory-hotremove-unset-migrate-type-isolate-after-removal.patch
-make-getdelays-cgroupstats-aware.patch
-mm-speed-up-writeback-ramp-up-on-clean-systems.patch
-add-ioresouce_busy-flag-for-system-ram.patch
-acpi-make-acpi_procfs-default-to-y.patch
-spi-fix-double-free-on-spi_unregister_master.patch
-spi-fix-error-paths-on-txx9spi_probe.patch
-paride-pf-driver-fixes.patch
-drivers-misc-move-misplaced-pci_dev_puts.patch
-dmaengine-fix-broken-device-refcounting.patch
-atmel_serial-build-warnings-begone.patch
-hugetlb-follow_hugetlb_page-for-write-access.patch -hugetlb-follow_hugetlb_page-for-write-access-fix.patch
-raid5-fix-unending-write-sequence.patch -hugetlb-split-alloc_huge_page-into-private-and-shared-components.patch -hugetlb-split-alloc_huge_page-into-private-and-shared-components-checkpatch-fixes.patch -hugetlb-fix-quota-management-for-private-mappings.patch
-hugetlb-debit-quota-in-alloc_huge_page.patch
-hugetlb-allow-bulk-updating-in-hugetlb__quota.patch -hugetlb-enforce-quotas-during-reservation-for-shared-mappings.patch -mm-hugetlbc-make-a-function-static.patch
-hugetlb-fix-i_blocks-accounting.patch -revert-task-control-groups-example-cpu-accounting-subsystem.patch -fixes-to-the-bfs-filesystem-driver.patch -linux-kernel-markers-fix-marker-mutex-not-taken-upon-module-load.patch -linux-kernel-markers-document-format-string.patch -linux-kernel-markers-fix-samples-to-follow-format-string-standard.patch -acpi-sbs-fix-retval-warning.patch
-acpi-expose-_sun-in-proc-acpi-processor-info.patch
-powerpc-fix-fs_enet-module-build.patch -fix-gregkh-driver-kobject-clean-up-rpadlpar-horrid-sysfs-abuse.patch -jdelvare-i2c-i2c-dev-add-comments.patch
-jdelvare-i2c-i2c-slave-busy-only-if-has-driver.patch
-jdelvare-i2c-i2c-make-i2c_check_addr-static.patch -jdelvare-i2c-i2c-pasemi-replace-obsolete-driverfs-reference.patch -jdelvare-i2c-i2c-eeprom-hide-serial-to-non-root-users.patch -jdelvare-i2c-i2c-eeprom-recognize-vgn-prefix-as-vaio.patch -jdelvare-i2c-i2c-pasemi-fix-nack-detection.patch -hwmon-replace-power-of-two-test-in-drivers-hwmon-adt7470c.patch
-cscope-build-warning.patch -ide-mm-ide-use-drive-select-all-for-req_type_ata_task-in-execute_drive_cmd.patch -ide-mm-ide-pmac-skip-conservative-pio-downgrade.patch -ide-mm-ide-add-missing-hob-bit-clearing-to-ide_dump_ata_status.patch -ide-mm-ide-dont-bug-on-unsupported-transfer-modes.patch
-blk_dev_idecd-help-remove-outdated-note.patch
-remove-references-to-net-modulestxt.patch
-megaraid-sas-convert-aen_mutex-to-the-mutex-api.patch -update-kerneldoc-comments-in-drivers-scsi-scsicamc.patch -libsas-convert-sas_proto-users-to-sas_protocol.patch
-libsas-fix-various-sparse-complaints.patch
-unionfs-clear-partial-read.patch
-usb-power-managementtxt-disconnect-clarification.patch -iwlwifi-remove-unnecessary-code-in-iwl3945-and-iwl4965-drivers.patch
-git-x86-broke-lguest.patch
-git-x86-broke-xen-too.patch
-i386-fix-reboot-with-no-keyboard-attached.patch -oprofile-op_model_athalonc-support-for-amd-family10h-barcelona-performance-counters.patch -oprofile-op_model_athalonc-support-for-amd-family10h-barcelona-performance-counters-checkpatch-fixes.patch -remove-extern-declarations-for-code-data-bss-resource.patch -x86_64-do-not-clear-cpu_index-set-by-store_cpu_info.patch -x86-typo-about-sequence-of-cpu_index-and-cpu_online-in.patch
-i386-and-x86_64-randomize-brk.patch
-i386-and-x86_64-randomize-brk-fix.patch
-i386-and-x86_64-randomize-brk-fix-2.patch
-x86-bitops_32h-style-cleanups.patch
-x86-check-boundary-in-count-setup_resource-called-by.patch
-arch-x86-remove-duplicate-includes.patch
-x86-arch_register_cpu-section-fix.patch
-i386-reboot-fixup-for-wrap-2c-board-sc1100-based.patch
-fix-wrong-proc-cpuinfo-on-x64.patch
-x86_64-clean-up-stack-allocation-and-free.patch
-x86_64-configure-stack-size.patch
-ia32-emu-remove-dead-code.patch
-x86_64-add-acpi-reboot-option.patch
-git-cryptodev-hifn_795x-fixes.patch
-xtensa-iss_net_setup-must-be-__init.patch
-i-oat-add-support-for-version-2-of-ioatdma-device.patch -reiserfs-dont-drop-pg_dirty-when-releasing-sub-page-sized-dirty-file.patch -rtc-release-correct-region-in-error-path.patch -rtc-fallback-to-requesting-only-the-ports-we-actually-use.patch -i5000_edac-no-need-to-__stringify-kbuild_basename.patch
-serial-only-use-pnp-irq-if-its-valid.patch
-sunrpc-xprtrdma-transportc-fix-use-after-free.patch
-fix-mm-utilckrealloc.patch
-fuse_file_alloc-fix-null-dereferences.patch
-tle62x0-driver-stops-ignoring-read-errors.patch
-rd-fix-data-corruption-on-memory-pressure.patch
-cris-gpio-undo-locks-before-returning.patch
-mips-undo-locking-on-error-path-returns.patch -mips-undo-locking-on-error-path-returns-checkpatch-fixes.patch -proc-simplify-and-correct-proc_flush_task.patch
-fix-param_sysfs_builtin-name-length-check.patch
-mark-sys_open-sys_read-exports-unused.patch
-sysctl-fix-token-ring-procname.patch
-gbefb-fix-section-mismatch-warnings.patch
-vmstat-fix-section-mismatch-warning.patch
-pidns-place-under-config_experimental.patch -pidns-place-under-config_experimental-checkpatch-fixes.patch -__do_irq-does-not-check-irq_disabled-when-irq_per_cpu-is-set.patch -hibernate-fix-lockdep-report-2.patch
-smbfs-fix-debug-builds.patch
-fix-64kb-blocksize-in-ext3-directories.patch -fix-64kb-blocksize-in-ext3-directories-checkpatch-fixes.patch
-uml-fix-spurious-irq-testing.patch
-uml-remove-last-include-of-libc-asm-pageh.patch
-uml-fix-build-for-config_tcp.patch
-uml-fix-build-for-config_printk.patch
-swap-delay-accounting-include-lock_page-delays.patch -file-capabilities-allow-sigcont-within-session-v2.patch -file-capabilities-allow-sigcont-within-session-v2-checkpatch-fixes.patch -file-capabilities-allow-sigcont-within-session-v2-file-capabilities-remove-the-non-matching-uid-special-case-for-kill.patch -feature-removal-schedule-remove-sa_-flags-entry.patch
-kernel-taskstatsc-fix-bogus-nlmsg_free.patch
-x86-show-cpuinfo-only-for-online-cpus.patch
-make-proc-acpi-ac_adapter-dependent-on-acpi_procfs.patch
-acpi-ac-update-ac-state-on-resume.patch
-keyspan-init-termios-properly.patch
-x86-disable-preemption-in-delay_tsc.patch
-oprofile-fix-oops-on-x86-32-bit.patch
-x86-early_quirks-cleanup.patch
-x86-dont-call-mce_create_device-on-cpu_up_prepare.patch
-aic94xx_sds-rename-flash_size.patch
-mips-pcspkr-build-fix.patch
-kernel-power-move-function-prototypes-to-header.patch -cris-build-fixes-fix-csum_tcpudp_magic-declaration.patch
-cris-build-fixes-add-missing-syscalls.patch
-cris-build-fixes-hardirqh-include-asm-irqh.patch
-cris-build-fixes-atomich-needs-compilerh.patch
-cris-build-fixes-atomich-needs-compilerh-fix.patch
-cris-build-fixes-irq-fixes.patch
-cris-build-fixes-sys_crisc-needs-fsh.patch
-cris-build-fixes-add-baud-rate-defines.patch
-cris-build-fixes-update-eth_v10c-ethernet-driver.patch -cris-build-fixes-update-eth_v10c-ethernet-driver-fix.patch -cris-build-fixes-corrected-and-improved-nmi-and-irq-handling.patch -cris-build-fixes-fixes-in-arch-cris-kernel-timec-checkpatch-fixes.patch -cris-build-fixes-fixes-in-arch-cris-kernel-timec.patch
-cris-build-fixes-setupc-needs-paramh.patch
-cris-build-fixes-fix-crisksymsc.patch
-cris-build-fixes-defconfig-updates.patch
-cris-array_size-cleanup.patch
-cris-dont-include-bitopsh-in-posix_typesh.patch
-crisv10-serial-driver-rewrite-take-three.patch -cris-remove-mtd_amstd-and-mtd_obsolete_chips-take-two.patch -cris-remove-mtd_amstd-and-mtd_obsolete_chips-take-two-checkpatch-fixes.patch -crisv10-fix-timer-interrupt-parameters.patch
-crisv10-improve-and-bugfix-fasttimer.patch
-crisv32-add-cache-flush-operations.patch

Merged into mainline or a subsystem tree

+update-checkpatchpl-to-version-012.patch +file-capabilities-allow-sigcont-within-session-v2.patch +cris-build-fixes-atomich-needs-compilerh.patch +atmel_spi-labels-gpios-better.patch +ps3-prefix-all-ps3-specific-kernel-modules-with.patch +ps3fb-video-memory-size-cleanups.patch +fix-boot-problem-with-iseries-lacking-hugepage-support.patch +uml-build-fix.patch
+xen-mask-_page_pcd-from-ptes.patch +pnp-increase-the-maximum-number-of-resources.patch +pnp-increase-the-maximum-number-of-resources-fix.patch +proc-fix-null-i_fop-oops.patch +wait_task_stopped-dont-use-task_pid_nr_ns-lockless.patch +proc-remove-races-from-proc_id_readdir.patch +m68k-export-atari_keyb_init.patch +amiga-zorro-bus-add-missing-zorro_device_remove.patch +mac68k-mailing-list-addresss.patch +tpm-tis-device-driver-locality-request.patch +termios-document-callback-more-clearly.patch +s3c24xx-ensure-we-only-configure-valid-gpios.patch +ipmi-add-the-standard-watchdog-timeout-ioctls.patch +s3c2410-add-bus-number-to-spi-gpio-driver.patch +revert-keyspan-init-termios-properly.patch +memory-hotplug-fix-fix-section-mismatch-in-vmammap_allock_block.patch +memory-hotplug-x86_64-fix-section-mismatch-in-init_memory_mapping.patch +fuse-fix-reading-past-eof.patch +fuse-cleanup-add-fuse_get_attr_version.patch +fuse-pass-open-flags-to-read-and-write.patch +fuse-fix-fuse_file_ops-sending.patch +fuse-fix-uninitialized-field-in-fuse_inode.patch +fuse-fix-attribute-caching-after-rename.patch +clone-prepare-to-recycle-clone_detached-and-clone_stopped-fix.patch

2.6.24 queue

-x86_64-efi-boot-support-efi-frame-buffer-v3.patch

Folded into x86_64-efi-boot-support-efi-frame-buffer.patch

+git-acpi-fixup.patch

Fix git-acpi.patch rejects

+agk-dm-dm-merge-max_hw_sector.patch
+agk-dm-dm-crypt-move-queue-functions.patch

device mapper tree updates

+gregkh-driver-kset-convert-to-kobj_sysfs_ops-vs-git-acpi.patch

Fix git-acpi versus driver tree

+intel-agp-enable-i915-recognition.patch

AGP fix

+time-fold-__get_realtime_clock_ts-into-getnstimeofday.patch

cleanup

+qlogic-infinipath-convert-ipath_eep_sem-to-mutex.patch +fix-build-failure-when-config_infiniband_ipoib_cm-is-not-defined.patch

scsi things

+input-polled-device-timer-rounding.patch

input fix

+pata_sisc-add-packard-bell-easynote-k5305-to-laptops.patch +ahci-invalid-use-of-writel-readl-with-iomap.patch +libata-core-list-more-documentation-sources-for-reference.patch +libata-iordy-handling.patch
+libata-sff-tf_load.patch +pata_ali-add-mitac-8317-and-derivatives.patch +pata_ali-lots-of-problems-still-showing-up-with-small-atapi-dma.patch +pata_hpt37x-fix-cable-detect-bug-spotted-by-sergei.patch +pata_isapnp-polled-devices.patch +pata_pcmcia-minor-cleanups-and-support-for-dual-channel-cards.patch +pata_ninja32-cardbus-ata-initial-support.patch +libata-add-toshiba-mk1637gsx-to-spurious-command-completion-list.patch

sata/pata things

+ide-mm-sis5513-add-packard-bell-easynote-k5305-to-laptops.patch +ide-mm-ide-dont-set-pio-mode-on-pre-eide-drives.patch +ide-mm-siimage-remove-resetproc-method.patch +ide-mm-ide-skip-ide_wait_not_busy-on-noprobe-disks.patch +ide-mm-aec62xx-fix-kernel-oops-in-driver-s-probe-function.patch +ide-mm-serverworks-cleanup-set_dma_mode-method.patch +ide-mm-ide-disk-add-idedisk_set_doorlock-helper.patch +ide-mm-ide-hopefully-fix-vdma-for-cs5520.patch +ide-mm-cy82c693-correct-dma-modes-clipping.patch +ide-mm-cy82c693-add-set_dma_mode-method.patch +ide-mm-sgiioc4-add-ide_toggle_bounce-calls.patch +ide-mm-icside-add-ide_toggle_bounce-calls.patch +ide-mm-au1xxx-ide-add-ide_toggle_bounce-calls.patch +ide-mm-ide-remove-ide_dma_on-and-dma_off_quietly-methods-from-ide_hwif_t.patch +ide-mm-ide-cris-fix-dma-methods.patch +ide-mm-atiixp-remove-dma_host_on-and-dma_host_off-methods.patch +ide-mm-ide-move-drive-using_dma-check-to-callers-of-dma_host_on-method.patch +ide-mm-ide-merge-dma_host_-on-off-methods-into-dma_host_set-method.patch

IDE tree updates

+ide-printk-fix.patch

fix it

+git-mips-fixup.patch

Fix rejects in git-mips.patch

+forcedeth-boot-delay-fix.patch

forcedeth fix

-nfs-stop-sillyname-renames-and-unmounts-from-racing.patch -nfs-stop-sillyname-renames-and-unmounts-from-racing-fix.patch -nfs-stop-sillyname-renames-and-unmounts-from-racing-fix-fix.patch -nfs-stop-sillyname-renames-and-unmounts-from-racing-fix-fix-fix.patch +nfs-stop-sillyname-renames-and-unmounts-from-racing-2.patch +nfs-fix-up-problems-with-steves-sillyrename-fix.patch +nfs-fix-nfs_free_unlinkdata.patch

Updated

-git-nfsd-fixup.patch

Unneeded

+git-nfsd-build-fix.patch

fix git-nfsd

+pci-add-pci-quirk-function-for-some-chipsets.patch +drivers-pci-quirksc-coding-style-cleanup.patch +more-sanity-checks-for-dmar.patch +more-sanity-checks-for-dmar-checkpatch-fixes.patch

PCI updates

+pcie-fix-double-initialization-bug.patch

PCIE fix

+dell-cerc-support-for-megaraid_mbox.patch

scsi fix

+iommu-sg-merging-add-device_dma_parameters-structure.patch +iommu-sg-merging-pci-add-device_dma_parameters-support.patch +iommu-sg-merging-x86-make-pci-gart-iommu-respect-the-segment-size-limits.patch +iommu-sg-merging-ppc-make-iommu-respect-the-segment-size-limits.patch +iommu-sg-merging-ia64-make-sba_iommu-respect-the-segment-size-limits.patch +iommu-sg-merging-alpha-make-pci_iommu-respect-the-segment-size-limits.patch +iommu-sg-merging-sparc64-make-iommu-respect-the-segment-size-limits.patch +iommu-sg-merging-parisc-make-iommu-respect-the-segment-size-limits.patch +iommu-sg-merging-call-blk_queue_segment_boundary-in-__scsi_alloc_queue.patch +iommu-sg-merging-sata_inic162x-use-pci_set_dma_max_seg_size.patch +iommu-sg-merging-aacraid-use-pci_set_dma_max_seg_size.patch

iommu work

+ti-3410-5052-usb-serial-convert-td_open_close_lock-to-mutex.patch

USB driver cleanup

+git-x86-fixup.patch
+git-x86-thread_order-borkage.patch +git-x86-thread_order-borkage-fix.patch
+git-x86-identify_cpu-fix.patch +git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko.patch +git-x86-memory_add_physaddr_to_nid-export-for-acpi-memhotplugko-checkpatch-fixes.patch

Fixes to gix-x86.patch

+x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2.patch

change x86_64 default memory model

+frv-fix-the-extern-declaration-of-kallsyms_num_syms.patch +frv-arrange-things-such-that-bra-can-reach-from-the-trap.patch +add-mike-christie-to-maintainers.patch +wait_task_stopped-pass-correct-exit_code-to.patch +isdn-validate-length-of-isdn_net_ioctl_cfgeaz.patch +tty-add-the-new-termios2-ioctls-to-the-compatible.patch +acpi-avoid-references-to-impossible-processors.patch

More 2.6.24 queue

+slub-move-kmem_cache_node-determination-into-add_full-and-add_partial-slub-workaround-for-lockdep-confusion.patch

Fix slub-move-kmem_cache_node-determination-into-add_full-and-add_partial.patch

+config_highpte-vs-sub-page-page-tables-fix-2.patch

Fix config_highpte-vs-sub-page-page-tables.patch some more

+vmstat-small-revisions-to-refresh_cpu_vm_stats.patch +mm-dont-allow-ioremapping-of-ranges-larger-than-vmalloc-space.patch +page-allocator-get-rid-of-the-list-of-cold-pages.patch +page-allocator-get-rid-of-the-list-of-cold-pages-fix.patch +mm-sparsec-check-the-return-value-of-sparse_index_alloc.patch

MM updates

+64bit-capability-support-legacy-support-fix.patch

Fix add-64-bit-capability-support-to-the-kernel.patch som emore

+smack-version-11c-simplified-mandatory-access-control-kernel.patch

smack

+m68knommu-removing-config-variable-dumptoflash.patch

m68knommu update

+pm-qos-remove-locks-around-blocking-notifier.patch

Fix PM qos patches

+m68k-array_size-cleanup.patch +dio-array_size-cleanup.patch +m68k-balance-ioremap-and-iounmap-in-m68k-atari-hades-pcic.patch +nubus-kill-drivers-nubus-nubus_symsc.patch +m68k-kill-arch-m68k-mac-mac_ksymsc.patch +m68k-kill-arch-m68k-hp300-ksymsc.patch +m68k-kill-arch-m68k-amiga-amiga_ksymsc.patch +m68k-kill-arch-m68k-atari-atari_ksymsc.patch +m68k-kill-arch-m68k-mvme16x-mvme16x_ksymsc.patch +mac68k-macii-adb-comment-correction.patch +mac68k-remove-dead-code.patch +mac68k-add-nubus-card-definitions-and-a-typo-fix.patch +mac68k-remove-dead-mac_adbkeycodes.patch

m68k stuff

+uml-arch-um-include-inith-needs-a-definition-of-__used.patch +uml-improve-detection-of-host-cmov-checkpatch-fixes-fix.patch +uml-tidy-pgtableh-fix.patch +uml-remove-unused-variables-in-the-context-switcher.patch +uml-convert-functions-to-void.patch +uml-host-tls-diagnostics.patch +uml-move-um_virt_to_phys.patch +uml-header-untangling.patch +uml-style-cleanup.patch
+uml-currenth-cleanup.patch +uml-fix-page-table-data-sizes.patch +uml-add-virt_to_pte.patch +uml-simplify-sigsegv-handling.patch +uml-use-ptrace-directly-in-libc-code.patch +uml-kill-processes-instead-of-panicing-kernel.patch +uml-add-missing-space.patch

UML updates

-procfs-detect-duplicate-names.patch

Updated

+use-__set_task_state-for-traced-stopped-tasks.patch

cleanup

+genericizing-iova-fix.patch

Fix genericizing-iova.patch

-mm-fix-blkdev-size-calculation-in-generic_write_checks.patch

Dropped

+fs-remove-dead-config-config_has_compat_epoll_event-symbol.patch +alpha-parisc-removing-config-variable-debug_rwlock.patch +document-i_sync-and-i_datasync.patch +ps3-checkpatch-drivers-ps3-ps3-sys-managerc.patch +ps3-checkpatch-drivers-ps3-ps3-vuartc.patch +percpu-__percpu_alloc_mask-can-dynamically-size-percpu_data.patch +i-oat-fixups-from-code-comments.patch +printkc-use-unsigned-ints-instead-of-longs-for-logbuf-index.patch +tpmc-fix-crash-during-device-removal.patch +a-few-corrections-to-include-linux-kbuild.patch +vt-bitlock-fix.patch
+avoid-divide-in-is_align.patch +do_wait-remove-one-else-if-branch.patch

Misc

+atmel_spi-throughput-improvement.patch
+atmel_spi-chain-dma-transfers.patch

SPI updates

+gigaset-clean-up-urb-status-usage.patch
+gigaset-code-cleanups.patch
+bas_gigaset-suspend-support-v2.patch
+usb_gigaset-suspend-support-v3.patch
+gigaset-atomic-cleanup.patch

ISDN

+rtc-ds1302-rtc-support.patch
+rtc-ds1302-rtc-support-checkpatch-fixes.patch

RTC updates

+generic-gpio-gpio_chip-support-gpiolib-locking-simplified.patch

Fix generic-gpio-gpio_chip-support.patch

+add-buffer-head-related-helper-functions.patch
+ext2-add-block-bitmap-validation.patch
+ext3-add-block-bitmap-validation.patch
+ext4-add-block-bitmap-validation.patch
+ext4-add-block-bitmap-validation-fix.patch

ext2/3/4 runtie checks

-ridiculous-ext3-costs-was-re-page-fault-costs.patch

Dropped

-nfsd-fix-wrong-mnt_writer-count-in-rename.patch

Obsolete

+iget-stop-bfs-from-using-iget-and-read_inode-try-fix.patch

Fix iget-stop-bfs-from-using-iget-and-read_inode-try.patch

+add-dma-engine-driver-for-freescale-mpc85xx-processors-fix-fix.patch

Fix add-dma-engine-driver-for-freescale-mpc85xx-processors.patch

+embed-a-struct-path-into-struct-nameidata-instead-of-nd-dentrymnt-nfs4-fix.patch

Fix embed-a-struct-path-into-struct-nameidata-instead-of-nd-dentrymnt.patch

+use-struct-path-in-struct-svc_export-nfsd-fix-wrong-mnt_writer-count-in-rename.patch

Fix use-struct-path-in-struct-svc_export.patch some more

-suppress-aout-library-support-if-config_binfmt_aout.patch -suppress-aout-library-support-if-config_binfmt_aout-checkpatch-fixes.patch -usb-net2280-cant-have-a-function-called.patch -usb-net2280-cant-have-a-function-called-checkpatch-fixes.patch -mn10300-allocate-serial-port-uart-ids-for-on-chip-serial.patch -mn10300-add-the-mn10300-am33-architecture-to-the-kernel.patch -mn10300-add-the-mn10300-am33-architecture-to-the-kernel-fix.patch -mn10300-add-the-mn10300-am33-architecture-to-the-kernel-ia64-fix.patch

Dropped

+add-the-namespaces-config-option.patch +move-the-uts-namespace-under-uts_ns-option.patch +move-the-ipc-namespace-under-ipc_ns-option.patch +cleanup-the-code-managed-with-the-user_ns-option.patch +cleanup-the-code-managed-with-the-user_ns-option-checkpatch-fixes.patch +cleanup-the-code-managed-with-pid_ns-option.patch +cleanup-the-code-managed-with-pid_ns-option-checkpatch-fixes.patch +mark-net_ns-with-depends-on-namespaces.patch

Namespace updates

+proc-remove-module_license.patch +proc-less-lock-operations-during-lookup.patch +proc-simplify-function-prototypes.patch +proc-remove-useless-check-on-symlink-removal.patch +proc-remove-useless-checks-in-proc_register.patch +proc-detect-duplicate-names-on-registration.patch +proc-detect-duplicate-names-on-registration-fix.patch +proc-implement-proc_single_file_operations.patch +proc-rewrite-do_task_stat-to-correctly-handle-pid-namespaces.patch +proc-seqfile-convert-proc_pid_statm.patch +proc-proper-pidns-handling-for-proc-self.patch

procfs maintenance

+intel-iommu-pmen-support.patch +intel-iommu-fault_reason_index_cleanuppatch.patch +intel-iommu-fault_reason_index_cleanuppatch-fix.patch

Intel IOMMU updates

+tty-let-architectures-override-the-user-kernel-macros.patch +tty-s390-support-for-termios2.patch +moxa-first-pass-at-termios-reporting.patch +n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch +rocket-first-pass-at-termios-reporting.patch +rocket-dont-let-random-users-reset-the-controller.patch +tty_audit-fix-checkpatch-complaint.patch +tty_io-drag-screaming-into-coding-style-compliance.patch +tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch +8250_early-coding-style.patch
+8250_gsc-coding-style.patch
+8250_hp300-coding-style.patch
+8250_hub6-codding-style.patch
+8250_pci-coding-style.patch
+serial8250-coding-style.patch +8250-enable-rate-reporting-via-termios.patch +serial_core-bring-mostly-into-line-with-coding-style.patch

tty/serial driver updates

3200 commits in 1255 patch files

All patches:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm1/patch-list

Hi, andrew

modpost failed for me:
MODPOST 360 modules
ERROR: "empty_zero_page" [drivers/kvm/kvm.ko] undefined! make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

Regards
dave

You're a victim of the hasty unexporting fad. Which architecture? x86_64 I guess?

Hi,
ia32 instead.

Regards
dave

oic. Like this, I guess.

@@ -2,6 +2,7 @@
 #include <asm/semaphore.h>
 #include <asm/checksum.h>
 #include <asm/desc.h>
+#include <asm/pgtable.h>
 
 EXPORT_SYMBOL(__down_failed);
 EXPORT_SYMBOL(__down_failed_interruptible);

@@ -22,3 +23,4 @@ EXPORT_SYMBOL(__put_user_8);
 EXPORT_SYMBOL(strstr);
 
 EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(empty_zero_page);

_

Yes, passed :)

Symbol init_level4_pgt is needed by nvidia module. Is it really need to unexport it?

Regards,  Kirill A. Shutemov
 + Belarus, Minsk
 + Velesys LLC, http://www.velesys.com/
 + ALT Linux Team, http://www.altlinux.com/

It's our clever way of reducing the tester base so we don't get so many bug reports.

FYI, x86_64 has the exact same issue.

----
KVM needs the empty_zero_page export reinstated.

diff -up linux-2.6.24-rc3-mm1/arch/x86/kernel/x8664_ksyms_64.c.export-empty-zero-page linux-2.6.24-rc3-mm1/arch/x86/kernel/x8664_ksyms_64.c
@@ -33,6 +33,7 @@ EXPORT_SYMBOL(__copy_from_user_inatomic)
 
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(empty_zero_page);
 
 /* Export string functions. We normally rely on gcc builtin for most of these,
    but gcc sometimes decides not to inline them. */    

[...]

yes:
hot-fixes/git-x86-dont-unexport-empty_zero_page.patch

regards,

Jiri Slaby ([email protected])
Faculty of Informatics, Masaryk University

I met.

  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  CALL    scripts/checksyscalls.sh

<stdin>:1389:2: warning: #warning syscall revokeat not implemented
<stdin>:1393:2: warning: #warning syscall frevoke not implemented
CHK include/linux/compile.h
make[1]: *** No rule to make target arch/ia64/lib/copy_page-export.o', needed by arch/ia64/lib/built-in.o'. Stop.
make: *** [arch/ia64/lib] Error 2

fix (for my config ?) is attached.

=
This was necessary to build.

 arch/ia64/lib/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6.24-rc3-mm1/arch/ia64/lib/Makefile
===================================================================
@@ -2,7 +2,7 @@
 # Makefile for ia64-specific library routines..
 #
 
-obj-y := io.o copy_page-export.o
+obj-y := io.o
 
 lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o			\
 	__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o			\

Hi Andrew,

The kernel build fails on S390x, with

arch/s390/kernel/ipl.c: In function `ipl_register_fcp_files':
arch/s390/kernel/ipl.c:415: error: `ipl_subsys' undeclared (first use in this function) arch/s390/kernel/ipl.c:415: error: (Each undeclared identifier is reported only once arch/s390/kernel/ipl.c:415: error: for each function it appears in.) arch/s390/kernel/ipl.c: In function `ipl_init':
arch/s390/kernel/ipl.c:449: error: implicit declaration of function firmware_register' arch/s390/kernel/ipl.c:449: error: ipl_subsys' undeclared (first use in this function) arch/s390/kernel/ipl.c: In function `on_panic_show':
arch/s390/kernel/ipl.c:764: error: implicit declaration of function shutdown_action_str' arch/s390/kernel/ipl.c:764: error: on_panic_action' undeclared (first use in this function) arch/s390/kernel/ipl.c:764: warning: format argument is not a pointer (arg 3) arch/s390/kernel/ipl.c:764: warning: format argument is not a pointer (arg 3) arch/s390/kernel/ipl.c: In function `on_panic_store':
arch/s390/kernel/ipl.c:771: error: SHUTDOWN_REIPL_STR' undeclared (first use in this function) arch/s390/kernel/ipl.c:772: error: on_panic_action' undeclared (first use in this function) arch/s390/kernel/ipl.c:772: error: SHUTDOWN_REIPL' undeclared (first use in this function) arch/s390/kernel/ipl.c:773: error: SHUTDOWN_DUMP_STR' undeclared (first use in this function) arch/s390/kernel/ipl.c:775: error: SHUTDOWN_DUMP' undeclared (first use in this function) arch/s390/kernel/ipl.c:776: error: SHUTDOWN_STOP_STR' undeclared (first use in this function) arch/s390/kernel/ipl.c:778: error: `SHUTDOWN_STOP' undeclared (first use in this function) arch/s390/kernel/ipl.c: At top level:
arch/s390/kernel/ipl.c:879: error: redefinition of 'ipl_register_fcp_files' arch/s390/kernel/ipl.c:412: error: previous definition of 'ipl_register_fcp_files' was here arch/s390/kernel/ipl.c:904: error: redefinition of 'ipl_init' arch/s390/kernel/ipl.c:446: error: previous definition of 'ipl_init' was here arch/s390/kernel/ipl.c:1050: error: reipl_run' undeclared here (not in a function) arch/s390/kernel/ipl.c:1050: error: initializer element is not constant arch/s390/kernel/ipl.c:1050: error: (near initialization for reipl_action.fn') arch/s390/kernel/ipl.c:1058: error: redefinition of 'sys_dump_fcp_wwpn_show' arch/s390/kernel/ipl.c:662: error: previous definition of 'sys_dump_fcp_wwpn_show' was here arch/s390/kernel/ipl.c:1058: error: redefinition of 'sys_dump_fcp_wwpn_store' arch/s390/kernel/ipl.c:662: error: previous definition of 'sys_dump_fcp_wwpn_store' was here arch/s390/kernel/ipl.c:1058: error: redefinition of 'sys_dump_fcp_wwpn_attr' arch/s390/kernel/ipl.c:662: error: previous definition of 'sys_dump_fcp_wwpn_attr' was here arch/s390/kernel/ipl.c:1060: error: redefinition of 'sys_dump_fcp_lun_show' arch/s390/kernel/ipl.c:664: error: previous definition of 'sys_dump_fcp_lun_show' was here arch/s390/kernel/ipl.c:1060: error: redefinition of 'sys_dump_fcp_lun_store' arch/s390/kernel/ipl.c:664: error: previous definition of 'sys_dump_fcp_lun_store' was here arch/s390/kernel/ipl.c:1060: error: redefinition of 'sys_dump_fcp_lun_attr' arch/s390/kernel/ipl.c:664: error: previous definition of 'sys_dump_fcp_lun_attr' was here arch/s390/kernel/ipl.c:1062: error: redefinition of 'sys_dump_fcp_bootprog_show' arch/s390/kernel/ipl.c:666: error: previous definition of 'sys_dump_fcp_bootprog_show' was here arch/s390/kernel/ipl.c:1062: error: redefinition of 'sys_dump_fcp_bootprog_store' arch/s390/kernel/ipl.c:666: error: previous definition of 'sys_dump_fcp_bootprog_store' was here arch/s390/kernel/ipl.c:1062: error: redefinition of 'sys_dump_fcp_bootprog_attr' arch/s390/kernel/ipl.c:666: error: previous definition of 'sys_dump_fcp_bootprog_attr' was here arch/s390/kernel/ipl.c:1064: error: redefinition of 'sys_dump_fcp_br_lba_show' arch/s390/kernel/ipl.c:668: error: previous definition of 'sys_dump_fcp_br_lba_show' was here arch/s390/kernel/ipl.c:1064: error: redefinition of 'sys_dump_fcp_br_lba_store' arch/s390/kernel/ipl.c:668: error: previous definition of 'sys_dump_fcp_br_lba_store' was here arch/s390/kernel/ipl.c:1064: error: redefinition of 'sys_dump_fcp_br_lba_attr' arch/s390/kernel/ipl.c:668: error: previous definition of 'sys_dump_fcp_br_lba_attr' was here arch/s390/kernel/ipl.c:1066: error: redefinition of 'sys_dump_fcp_device_show' arch/s390/kernel/ipl.c:670: error: previous definition of 'sys_dump_fcp_device_show' was here arch/s390/kernel/ipl.c:1066: error: redefinition of 'sys_dump_fcp_device_store' arch/s390/kernel/ipl.c:670: error: previous definition of 'sys_dump_fcp_device_store' was here arch/s390/kernel/ipl.c:1066: error: redefinition of 'sys_dump_fcp_device_attr' arch/s390/kernel/ipl.c:670: error: previous definition of 'sys_dump_fcp_device_attr' was here arch/s390/kernel/ipl.c:1069: error: redefinition of 'dump_fcp_attrs' arch/s390/kernel/ipl.c:673: error: previous definition of 'dump_fcp_attrs' was here arch/s390/kernel/ipl.c:1078: error: redefinition of 'dump_fcp_attr_group' arch/s390/kernel/ipl.c:682: error: previous definition of 'dump_fcp_attr_group' was here arch/s390/kernel/ipl.c:1085: error: redefinition of 'sys_dump_ccw_device_show' arch/s390/kernel/ipl.c:689: error: previous definition of 'sys_dump_ccw_device_show' was here arch/s390/kernel/ipl.c:1085: error: redefinition of 'sys_dump_ccw_device_store' arch/s390/kernel/ipl.c:689: error: previous definition of 'sys_dump_ccw_device_store' was here arch/s390/kernel/ipl.c:1085: error: redefinition of 'sys_dump_ccw_device_attr' arch/s390/kernel/ipl.c:689: error: previous definition of 'sys_dump_ccw_device_attr' was here arch/s390/kernel/ipl.c:1088: error: redefinition of 'dump_ccw_attrs' arch/s390/kernel/ipl.c:692: error: previous definition of 'dump_ccw_attrs' was here arch/s390/kernel/ipl.c:1093: error: redefinition of 'dump_ccw_attr_group' arch/s390/kernel/ipl.c:697: error: previous definition of 'dump_ccw_attr_group' was here arch/s390/kernel/ipl.c:1101: error: redefinition of 'dump_set_type' arch/s390/kernel/ipl.c:705: error: previous definition of 'dump_set_type' was here arch/s390/kernel/ipl.c:1122: error: conflicting types for 'dump_type_show' arch/s390/kernel/ipl.c:729: error: previous definition of 'dump_type_show' was here arch/s390/kernel/ipl.c:1128: error: conflicting types for 'dump_type_store' arch/s390/kernel/ipl.c:736: error: previous definition of 'dump_type_store' was here arch/s390/kernel/ipl.c:1140: error: variable `dump_type_attr' has initializer but incomplete type arch/s390/kernel/ipl.c:1140: error: conflicting types for 'dump_type_attr' arch/s390/kernel/ipl.c:748: error: previous definition of 'dump_type_attr' was here arch/s390/kernel/ipl.c:1141: error: unknown field attr' specified in initializer arch/s390/kernel/ipl.c:1141: error: extra brace group at end of initializer arch/s390/kernel/ipl.c:1141: error: (near initialization for dump_type_attr') arch/s390/kernel/ipl.c:1141: warning: excess elements in struct initializer arch/s390/kernel/ipl.c:1141: warning: (near initialization for dump_type_attr') arch/s390/kernel/ipl.c:1141: error: unknown field show' specified in initializer arch/s390/kernel/ipl.c:1141: warning: excess elements in struct initializer arch/s390/kernel/ipl.c:1141: warning: (near initialization for dump_type_attr') arch/s390/kernel/ipl.c:1141: error: unknown field store' specified in initializer arch/s390/kernel/ipl.c:1141: warning: excess elements in struct initializer arch/s390/kernel/ipl.c:1141: warning: (near initialization for dump_type_attr') arch/s390/kernel/ipl.c:1143: error: syntax error before '(' token arch/s390/kernel/ipl.c: In function dump_init':
arch/s390/kernel/ipl.c:1231: warning: passing arg 2 of sysfs_create_file' from incompatible pointer type arch/s390/kernel/ipl.c: In function shutdown_actions_init':
arch/s390/kernel/ipl.c:1254: warning: passing arg 2 of sysfs_create_file' from incompatible pointer type arch/s390/kernel/ipl.c:1260: error: shutdown_on_panic_nb' undeclared (first use in this function) arch/s390/kernel/ipl.c: At top level:
arch/s390/kernel/ipl.c:237: warning: 'get_ipl_type' defined but not used arch/s390/kernel/ipl.c:477: warning: 'ipl_action' defined but not used arch/s390/kernel/ipl.c:682: warning: 'dump_fcp_attr_group' defined but not used arch/s390/kernel/ipl.c:697: warning: 'dump_ccw_attr_group' defined but not used arch/s390/kernel/ipl.c:748: warning: 'dump_type_attr' defined but not used arch/s390/kernel/ipl.c:843: warning: 'do_dump' defined but not used arch/s390/kernel/ipl.c:1049: warning: 'reipl_action' defined but not used arch/s390/kernel/ipl.c:1146: warning: 'dump_run' defined but not used
make[1]: *** [arch/s390/kernel/ipl.o] Error 1
make: *** [arch/s390/kernel] Error 2
11/21/2007-06:02:16 Build the kernel. Failed rc = 2

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

Yes, sorry, I forgot to mention that. I got a large patch reject between Greg's driver tree and the s390 tree and I couldn't be bothered fixing it. s390 is busted in 2.6.24-rc3-mm1.

Hi Andrew,

Kernel panic's across different architectures like powerpc, x86_64, 

Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) Mount-cache hash table entries: 256
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
..MP-BIOS bug: 8254 timer not connected to IO-APIC

Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

powerpc complains about IO-APICs??

ACPI or x86 breakage, I guess.

Did 'noapic' work?

Hi Andrew,

Passing noapic works, but the kernel oops's

[   97.161103] Unable to handle kernel NULL pointer dereference at 0000000000000009 RIP:
[   97.193973]  [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
[   97.245359] PGD 0
[   97.257611] Oops: 0000 [1] SMP
[   97.276638] last sysfs file:
[   97.294417] CPU 0
[   97.306620] Modules linked in:
[   97.325066] Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #1
[   97.360514] RIP: 0010:[<ffffffff802341df>]  [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
[   97.413287] RSP: 0000:ffff81012fabb650  EFLAGS: 00010286
[   97.445363] RAX: ffffffff809bb060 RBX: ffff81012fabb650 RCX: 00000000000000ff
[   97.488378] RDX: 0000000000000001 RSI: 000000000000013e RDI: 0000000000000100
[   97.531413] RBP: ffff81012fabb680 R08: ffff81012fa88180 R09: 0000000000000000
[   97.574428] R10: 0000000000000000 R11: 0000000000000000 R12: ffff810001005f50
[   97.617394] R13: 0000000000000000 R14: ffff81012fa88180 R15: ffff810001005f40
[   97.660421] FS:  0000000000000000(0000) GS:ffffffff806c3000(0000) knlGS:0000000000000000
[   97.709327] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[   97.743995] CR2: 0000000000000009 CR3: 0000000000201000 CR4: 00000000000006a0
[   97.787021] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   97.830053] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   97.873036] Process swapper (pid: 1, threadinfo FFFF81012FABA000, task FFFF81012FAB8040)
[   97.921993] Stack:  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   97.971056]  ffff810001005f40 ffff81012fabb700 ffff81012fabbdf0 ffffffff80235487
[   98.016420]  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   98.060324] Call Trace:
[   98.076657]  [<ffffffff80235487>] build_sched_domains+0x1e1/0xc19
[   98.113383]  [<ffffffff8025072a>] __kernel_text_address+0x22/0x30
[   98.150173]  [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[   98.184355]  [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[   98.215406]  [<ffffffff8025db06>] mark_held_locks+0x4a/0x6a
[   98.249027]  [<ffffffff80284f4a>] get_page_from_freelist+0x42a/0x77d
[   98.287362]  [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
[   98.323123]  [<ffffffff8028527a>] get_page_from_freelist+0x75a/0x77d
[   98.361429]  [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[   98.392427]  [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[   98.426621]  [<ffffffff8034d01a>] number+0x115/0x21f
[   98.456594]  [<ffffffff8025072a>] __kernel_text_address+0x22/0x30
[   98.493362]  [<ffffffff8020d80c>] dump_trace+0x248/0x25d
[   98.525493]  [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[   98.559678]  [<ffffffff8025f03f>] __lock_acquire+0xdee/0xf06
[   98.593868]  [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[   98.628038]  [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[   98.662225]  [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[   98.696370]  [<ffffffff8025f03f>] __lock_acquire+0xdee/0xf06
[   98.730563]  [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[   98.764689]  [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[   98.795767]  [<ffffffff8025db06>] mark_held_locks+0x4a/0x6a
[   98.829432]  [<ffffffff8034d01a>] number+0x115/0x21f
[   98.859460]  [<ffffffff804ca267>] kprobe_flush_task+0x63/0xa9
[   98.894166]  [<ffffffff8034ddbd>] vsnprintf+0x58f/0x5d5
[   98.925739]  [<ffffffff8034de6b>] sprintf+0x68/0x6a
[   98.955257]  [<ffffffff8025f1c9>] lock_acquire+0x72/0xe0
[   98.987363]  [<ffffffff8025ca45>] lock_acquired+0x57/0x1d4
[   99.020446]  [<ffffffff8025f430>] lock_release+0x67/0x21a
[   99.053079]  [<ffffffff8025b127>] check_chain_key+0x9c/0x15f
[   99.087261]  [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[   99.118328]  [<ffffffff8025d544>] mark_lock+0x3b/0x5b3
[   99.149394]  [<ffffffff80236330>] arch_init_sched_domains+0x27/0x69
[   99.187217]  [<ffffffff802a5a5f>] dbg_redzone2+0x2a/0x52
[   99.219320]  [<ffffffff802a656b>] cache_alloc_debugcheck_after+0x16e/0x1cb
[   99.260779]  [<ffffffff802a8083>] kmem_cache_alloc+0x15e/0x182
[   99.295944]  [<ffffffff80236365>] arch_init_sched_domains+0x5c/0x69
[   99.333768]  [<ffffffff8098e501>] sched_init_smp+0x27/0x113
[   99.367400]  [<ffffffff8034ff35>] __bitmap_weight+0x78/0x8d
[   99.401090]  [<ffffffff8097e631>] kernel_init+0x12d/0x315
[   99.433718]  [<ffffffff804c6f57>] _spin_unlock_irq+0x2b/0x30
[   99.467842]  [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
[   99.503534]  [<ffffffff8025dda1>] trace_hardirqs_on+0x198/0x1c3
[   99.539251]  [<ffffffff8020d1b8>] child_rip+0xa/0x12
[   99.569234]  [<ffffffff8020c8cf>] restore_args+0x0/0x30
[   99.600845]  [<ffffffff8097e504>] kernel_init+0x0/0x315
[   99.632426]  [<ffffffff8020d1ae>] child_rip+0x0/0x12
[   99.662455]
[   99.671637] INFO: lockdep is turned off.
[   99.695385]
[   99.695385] Code: 48 03 42 08 49 89 04 24 48 83 c4 20 89 c8 5b 41 5c c9 c3 55
[   99.750603] RIP  [<ffffffff802341df>] cpu_to_allnodes_group+0x69/0x7c
[   99.789632]  RSP <ffff81012fabb650>

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

OK.

urgh, mess. Enabling frame pointers might help here.

But we're cc'ing the right guy ;)

The kernel was compiled with frame pointers enabled.

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

I seen an identical error.

Not for me. I get a similar oops, but then the kernel panics

[snip]

CONFIG_FRAME_POINTER=y

The oops/panic that happens with noapic:

[   35.866758] Initializing CPU#3
[   35.868769] Stuck ??
[   35.874043] Inquiring remote APIC #3...
[   35.877896] ... APIC #3 ID: 03000000
[   35.881523] ... APIC #3 VERSION: 80050010
[   35.885587] ... APIC #3 SPIV: 000001ff
[   35.889390] Brought up 1 CPUs
[   35.892375] Unable to handle kernel NULL pointer dereference at
0000000000000009 RIP:
[   35.897868]  [<ffffffff8022fc5b>] cpu_to_allnodes_group+0x4b/0x60
[   35.906464] PGD 0
[   35.908523] Oops: 0000 [1] SMP
[   35.911757] last sysfs file:
[   35.914740] CPU 0
[   35.916798] Modules linked in:
[   35.919990] Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #2
[   35.925914] RIP: 0010:[<ffffffff8022fc5b>]  [<ffffffff8022fc5b>]
cpu_to_allnodes_group+0x4b/0x60
[   35.934734] RSP: 0000:ffff81011ff2bdb0  EFLAGS: 00010282
[   35.940053] RAX: ffffffff8084d870 RBX: ffff810001005810 RCX: 0000000000000004
[   35.947188] RDX: 0000000000000001 RSI: ffff81011ff26f68 RDI: ffff81011ff2bdb0
[   35.954323] RBP: ffff81011ff2bdd0 R08: 2222222222222222 R09: 0000000000000000
[   35.961457] R10: ffff81007ff1c200 R11: 0000000000000200 R12: ffff810001005800
[   35.968592] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[   35.975727] FS:  0000000000000000(0000) GS:ffffffff807d4000(0000)
knlGS:0000000000000000
[   35.983951] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[   35.989701] CR2: 0000000000000009 CR3: 0000000000201000 CR4: 00000000000006a0
[   35.996836] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   36.003971] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   36.011105] Process swapper (pid: 1, threadinfo FFFF81011FF2A000,
task FFFF81007FF2A000)
[   36.019191] Stack:  0000000000000000 ffffffff807e8f98
0000000000000000 ffff810001005800
[   36.027373]  ffff81011ff2be80 ffffffff80230580 ffffffff8084d640
ffffffff8084d6e0
[   36.034922]  ffffffff8084d780 ffffffff8084d800 ffffffffffffffff
ffff81011ff26f68
[   36.042247] Call Trace:
[   36.044929]  [<ffffffff80230580>] build_sched_domains+0x460/0x820
[   36.051701]  [<ffffffff805cf489>] mutex_lock_nested+0x199/0x2e0
[   36.057624]  [<ffffffff80230991>] arch_init_sched_domains+0x51/0x60
[   36.063895]  [<ffffffff8080e422>] sched_init_smp+0x22/0xe0
[   36.069385]  [<ffffffff80806825>] smp_cpus_done+0x25/0x30
[   36.074791]  [<ffffffff807fb739>] kernel_init+0x109/0x350
[   36.080196]  [<ffffffff8025a34f>] trace_hardirqs_on+0xbf/0x160
[   36.086032]  [<ffffffff805d03d2>] trace_hardirqs_on_thunk+0x35/0x3a
[   36.092303]  [<ffffffff8025a34f>] trace_hardirqs_on+0xbf/0x160
[   36.098141]  [<ffffffff8020cbc8>] child_rip+0xa/0x12
[   36.103113]  [<ffffffff8020c2df>] restore_args+0x0/0x30
[   36.108345]  [<ffffffff807fb630>] kernel_init+0x0/0x350
[   36.113750]  [<ffffffff8020cbbe>] child_rip+0x0/0x12
[   36.118722]
[   36.120236] INFO: lockdep is turned off.
[   36.124170]
[   36.124170] Code: 48 03 42 08 48 89 03 48 83 c4 18 89 c8 5b c9 c3
0f 1f 44 00
[   36.133640] RIP  [<ffffffff8022fc5b>] cpu_to_allnodes_group+0x4b/0x60
[   36.140116]  RSP <ffff81011ff2bdb0>
[   36.143619] CR2: 0000000000000009
[   36.146952] Kernel panic - not syncing: Attempted to kill init!

(gdb) list *0xffffffff8022fc5b
0xffffffff8022fc5b is in cpu_to_allnodes_group (kernel/sched.c:6073). 6068
6069 cpus_and(nodemask, nodemask, *cpu_map);
6070 group = first_cpu(nodemask);
6071
6072 if (sg)
6073 *sg = &per_cpu(sched_group_allnodes, group);
6074 return group;
6075 }
6076
6077 static void init_numa_sched_groups_power(struct sched_group *group_head)

Hope this stack trace is better.

Torsten

This bug is also reproducible with qemu.

Regards,  Kirill A. Shutemov
 + Belarus, Minsk
 + Velesys LLC, http://www.velesys.com/
 + ALT Linux Team, http://www.altlinux.com/

did previous kernels print this too?

If you suspect ACPI breakage, then try "acpi=off" or "acpi=noirq".

thanks,
-Len

Not since my last BIOS upgrade.

This is from what dmesg's I still had laying around:
2.6.22-rc6-mm1: No
2.6.23-rc1-mm1, 2.6.23-rc2-mm1, 2.6.23-rc3-mm1: Yes 2.6.23-rc3-mm1 after BIOS upgrade: No 2.6.23-rc4-mm1...2.6.24-rc2-mm1: No

ACPI doesn't look guilty.
acpi=noirq:

[   39.905884] Freeing SMP alternatives: 28k freed
[   39.910674] ACPI: Core revision 20070126
[   39.916542] ACPI: setting ELCR to 0e20 (from 0c20)
[   39.921855] ExtINT not setup in hardware but reported by MP table
[   39.928244] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   39.934586] Kernel panic - not syncing: IO-APIC + timer doesn't
work! Try using the 'noapic' kernel parameter
[   39.934587]

acpi=off:

[    0.000000] Freeing SMP alternatives: 28k freed
[    0.000000] ExtINT not setup in hardware but reported by MP table
[    0.000000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.000000] Kernel panic - not syncing: IO-APIC + timer doesn't
work! Try using the 'noapic' kernel parameter
[    0.000000]

Torsten

Hmm. same date here. It's Asus P5B-E motheboard

No! The box freezes somewhere after "Freeing unused kernel memory"...

Bisection points to git-x86.patch, though.

git-bisect start
# good: [f05092637dc0d9a3f2249c9b283b973e6e96b7d2] Linux 2.6.24-rc3
git-bisect good f05092637dc0d9a3f2249c9b283b973e6e96b7d2
# bad: [46c8c396d2c87b786a7fac615c289f85a18e53ce] w1-build-fix
git-bisect bad 46c8c396d2c87b786a7fac615c289f85a18e53ce
# bad: [4e22f4852c48e1eddfe04299e78c0456164abe86] frv-move-dma-macros-to-scatterlisth-for-consistency git-bisect bad 4e22f4852c48e1eddfe04299e78c0456164abe86
# bad: [4e22f4852c48e1eddfe04299e78c0456164abe86] frv-move-dma-macros-to-scatterlisth-for-consistency git-bisect bad 4e22f4852c48e1eddfe04299e78c0456164abe86
# good: [d5135f31313af2be37d8ccb71e2a42f8e221d8c4] ide-mm-ide-disk-extend-timeout-for-pio-out-commands git-bisect good d5135f31313af2be37d8ccb71e2a42f8e221d8c4
# good: [6be815e83f506f4c39a46cf59014e29a95c5e6c4] iommu-sg-merging-call-blk_queue_segment_boundary-in-__scsi_alloc_queue git-bisect good 6be815e83f506f4c39a46cf59014e29a95c5e6c4
# good: [6be815e83f506f4c39a46cf59014e29a95c5e6c4] iommu-sg-merging-call-blk_queue_segment_boundary-in-__scsi_alloc_queue git-bisect good 6be815e83f506f4c39a46cf59014e29a95c5e6c4
# bad: [c792db6d06114a85e33a27c89e9e979f11b951c4] slub-fix-coding-style-violations
git-bisect bad c792db6d06114a85e33a27c89e9e979f11b951c4
# bad: [c792db6d06114a85e33a27c89e9e979f11b951c4] slub-fix-coding-style-violations
git-bisect bad c792db6d06114a85e33a27c89e9e979f11b951c4
# bad: [76f3939b76ff557f73720b57a16716196f04e407] x86_64-make-sparsemem-vmemmap-the-default-memory-model-v2 git-bisect bad 76f3939b76ff557f73720b57a16716196f04e407
# good: [b8ba611566d8799a979b190d4bb14305ca64ee0e] sis-fb-driver-_ioctl32_conversion-functions-do-not-exist-in-recent-kernels git-bisect good b8ba611566d8799a979b190d4bb14305ca64ee0e
# good: [e34995928859308d2abef1709332e2b12d36db2f] git-ipwireless_cs
git-bisect good e34995928859308d2abef1709332e2b12d36db2f
# bad: [f520abbbe11bc8253714bcd34aaaf19bdf82189e] git-x86-identify_cpu-fix
git-bisect bad f520abbbe11bc8253714bcd34aaaf19bdf82189e

I honestly tried fresh #mm from x86 tree -- the one which ends at commit 70be766db1105c0fc9aed8e954d0c343c1eda067 "x86: Add the RDC machine specific reboot fixup". FWIW, commit "x86: validate against ACPI motherboard resources" is innocent. After "x86: make stack size configurable" damn thing wouldn't build and applying fixets from -mm doesn't help at 3AM.

Again, it's late here, I'll recheck today.

I got the same bug as above, 'noapic' gets past that point and right to the next oops. I'm posting it here because this one is different from the others in the thread, yet looks vaguely related:

Unable to handle kernel NULL pointer dereference at 0000000000000021 RIP:
 [<ffffffff8108382a>] refresh_zone_stat_thresholds+0x6d/0x90
PGD 0
Oops: 0002 [1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.24-rc3-mm1 #2
RIP: 0010:[<ffffffff8108382a>]  [<ffffffff8108382a>] refresh_zone_stat_thresholds+0x6d/0x90
RSP: 0000:ffff81007fb59ec0  EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff8146fb38 RDI: 0000000000000001
RBP: ffff81000000c000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff81007fb59e60 R11: 0000000000000028 R12: ffffffff814d4558
R13: 0000000000000000 R14: ffffffff814b62c0 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffffff813d9000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000021 CR3: 0000000000201000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo FFFF81007FB58000, task FFFF81007FB56000)
Stack:  0000000000000000 0000000000000000 0000000000000000 ffffffff814a3839
 0000000000000000 ffffffff8148e626 ffff81007fb56000 ffffffff8126d36a
 0000000000000000 ffffffffffffffff ffffffff8105786b 0000000000000000
Call Trace:
 [<ffffffff814a3839>] setup_vmstat+0x6/0x40
 [<ffffffff8148e626>] kernel_init+0x169/0x2d8
 [<ffffffff8126d36a>] trace_hardirqs_on_thunk+0x35/0x3a
 [<ffffffff8105786b>] trace_hardirqs_on+0x115/0x138
 [<ffffffff8100ce48>] child_rip+0xa/0x12
 [<ffffffff8100c55f>] restore_args+0x0/0x30
 [<ffffffff8148e4bd>] kernel_init+0x0/0x2d8
 [<ffffffff8100ce3e>] child_rip+0x0/0x12

INFO: lockdep is turned off.

All Rights Reversed

We still don't know what caused this, afaik.

hm. This smells like a startup ordering problem, but everything which refresh_zone_stat_thresholds() should be set up by the time we run initcalls. Maybe the zone lists are bad?

yes. Is it a regression? If yes, could someone try to bisect it so that we can fix it? If it's caused by x86.git then the 'mm' branch of the x86 git tree can be used for bisection:

git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git

it's supposed to build and boot fine at every bisection point. The bisection run can be cut significantly by narrowing the bisection to the arch/x86 changes only:

git-bisect start arch/x86 include/asm-x86/

(and if it finds a nonsensical commit, i.e. the breakage is not caused by the x86 commits, save the "git-bisect log" output into a file, restart the git bisection and use "git-bisect replay" to insert all the test points into a fuller bisection run - this saves quite some time.)

Ingo

I did, but it's hard, if you don't know the BAD point. HEAD boots fine and 'x86:
randomize brk' too (the top of git-x86.patch). Andrew, how do you pull it, git #mm doesn't fit to the ids from the patch.

Maybe if you can emit a broken-out with the fresh pull to test?

regards,

Jiri Slaby ([email protected])
Faculty of Informatics, Masaryk University

So the bug wasn't in git-x86 in 2.6.24-rc3-mm1.

But it might be in there now, as some patches got moved over.

Or it could be git-acpi. Or lots of other things.

The -mm git tree reimports the plain git-foo.patch files back into a new git tree, so the commit IDs won't line up.

The way to find the culprit patch in 2.6.24-rc3-mm1 is
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt. It will be quite quick.

http://userweb.kernel.org/~akpm/mmotm/ is current. But it probably won't compile. I'd suggest bisecting 2.6.24-rc3-mm1 would be easier.

Yes, I've bisected this and it pointed to git-x86.patch + 2 pushed fixes from series, Then tried x86 git, but its HEAD was OK.

Yes it did :). And it worked. Both in qemu and on my desktop...

qemu output at:
http://www.fi.muni.cz/~xslaby/sklad/qemu-output.txt

thanks,

Jiri Slaby ([email protected])
Faculty of Informatics, Masaryk University

boggle. Let's slap 2.6.25 on it and take the rest of the year off.

Thanks for testing.

No worries, the mmotm compiling issue seems to have been fixed:

CC [M] drivers/scsi/libsas/sas_ata.o
drivers/scsi/libsas/sas_ata.c:39: error: field ‘rphy’ has incomplete type drivers/scsi/libsas/sas_ata.c: In function ‘sas_discover_sata’:
drivers/scsi/libsas/sas_ata.c:773: error: implicit declaration of function ‘ata_sas_rphy_alloc’ drivers/scsi/libsas/sas_ata.c:775: error: dereferencing pointer to incomplete type drivers/scsi/libsas/sas_ata.c:775: warning: assignment makes pointer from integer without a cast drivers/scsi/libsas/sas_ata.c:781: error: dereferencing pointer to incomplete type drivers/scsi/libsas/sas_ata.c:782: error: dereferencing pointer to incomplete type drivers/scsi/libsas/sas_ata.c:784: warning: type defaults to ‘int’ in declaration of ‘__mptr’ drivers/scsi/libsas/sas_ata.c:784: warning: initialization from incompatible pointer type drivers/scsi/libsas/sas_ata.c:791: error: implicit declaration of function ‘ata_sas_rphy_add’ drivers/scsi/libsas/sas_ata.c:807: error: implicit declaration of function ‘ata_sas_rphy_delete’ drivers/scsi/libsas/sas_ata.c:809: error: implicit declaration of function ‘ata_sas_rphy_free’ make[3]: *** [drivers/scsi/libsas/sas_ata.o] Error 1
make[2]: *** [drivers/scsi/libsas] Error 2
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2

So much for continuing the bisect with that tree, to find the cause of the second bug :)

Guess I'll extract an x86 tree changeset first, to place into the 2.6.23-rc3-mm1 broken out tree and work from there...

"Debugging is twice as hard as writing the code in the first place.
Therefore, if you write the code as cleverly as possible, you are,
by definition, not smart enough to debug it." - Brian W. Kernighan

Or the CPU array. Look at the oops Kamalesh got a few mails upthread...

I guess I'll have to start a bisect - can't port the VM code to a kernel that doesn't boot...

All Rights Reversed

refresh_zone_stat_thresholds goes through each zone and updates the stat threshold for every per cpu structure in each zone.

So this could be a processor marked online where the pcp structures have not been allocated or a zone NULL pointer.

Hi Andrew,

The kernel build fails on powerpc while linking,

AS .tmp_kallsyms3.o
LD vmlinux.o
ld: TOC section size exceeds 64k
make: *** [vmlinux.o] Error 1

The patch posted at http://lkml.org/lkml/2007/11/13/414, solves this failure.

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

Only for allyesconfig (or maybe some other config that builds a lot of stuff in.

However, that patch needs more testing especially to figure out what performance effects it has. i.e. not for merging, yet.

Cheers,
Stephen Rothwell                    [email protected]
http://www.canb.auug.org.au/~sfr/

Hi Andrew,

The make headers_check fails,

  CHECK   include/linux/usb/gadgetfs.h
  CHECK   include/linux/usb/ch9.h
  CHECK   include/linux/usb/cdc.h
  CHECK   include/linux/usb/audio.h
  CHECK   include/linux/kvm.h

/root/kernels/linux-2.6.24-rc3/usr/include/linux/kvm.h requires asm/kvm.h, which does not exist in exported headers make[2]: *** [/root/kernels/linux-2.6.24-rc3/usr/include/linux/.check.kvm.h] Error 1
make[1]: *** [linux] Error 2
make: *** [headers_check] Error 2

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

hm, works for me, on i386 and x86_64. What's different over there?

Hi Andrew,

It fails on the powerpc box, with allyesconfig option.

Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.

How do we fix this? Export linux/kvm.h only on x86? Seems ugly.

Any sufficiently difficult bug is indistinguishable from a feature.

i'm sure i'm going to humiliate myself for asking this, but shouldn't i be able to reproduce the above by just running:

  $ make ARCH=powerpc headers_install/headers_check

we've sort of had this discussion before where, IIRC, you should be able to generate the appropriate arch-specific headers without having the corresponding toolchain, no? so why can't i reproduce that error on my x86 box?

rday
--

========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry Waterloo, Ontario, CANADA

http://crashcourse.ca
========================================================================

I can.

setenv ARCH powerpc
make mrproper
make allmodconfig
make headers_check

... snip ...

ack. never mind, i just noticed that this is with the rc3-mm1 tree. i was confused since, in the latest git tree, there is absolutely *no* inclusion of <asm/kvm.h> anywhere in the tree, so clearly something like that has been added in the mm tree.

sorry for the noise.

rday
--

========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry Waterloo, Ontario, CANADA

http://crashcourse.ca
========================================================================

Is kvm x86 specific? Then move the .h file to asm-x86. Otherwise no good idea...

Sam

kvm.h is x86 specific today, but will be s390, ppc, ia64, and x86 specific tomorrow.

What about having a asm-generic/kvm.h with a nice #error? would that suit?

error compiling committee.c: too many arguments to function

headers_check continues to complain. Is the only recourse to add asm/kvm.h for all archs?

error compiling committee.c: too many arguments to function

that's what's happened with other header files. see asm-*/auxvec.h, for example.

rday
--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry Waterloo, Ontario, CANADA

http://crashcourse.ca
========================================================================

That would work.

Meanwhile my recourse is to drop the kvm tree ;)

Since you put it this way...

I committed the attached (sorry) patch to kvm.git. Rather than touching 2*($NARCH - 1) file, I changed include/linux/Kbuild to only export kvm.h if the arch actually supports it. Currently that's just x86.

error compiling committee.c: too many arguments to function

From: Avi Kivity <[email protected]>
Date: Sun, 2 Dec 2007 10:50:06 +0200
Subject: [PATCH] KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM

Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h> includes, not existing. Rather than add a zillion <asm/kvm.h>s, export kvm.h only if the arch actually supports it.

---
 arch/x86/Kconfig     |    3 +++
 drivers/kvm/Kconfig  |    4 ++--
 include/linux/Kbuild |    2 +-
 3 files changed, 6 insertions(+), 3 deletions(-)

index 368864d..eded44e 100644
@@ -112,6 +112,9 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default X86_64
 
+config ARCH_SUPPORTS_KVM
+	bool
+	default y
 
 
 

index 6569206..4086080 100644
@@ -3,7 +3,7 @@
 #
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
-	depends on X86
+	depends on ARCH_SUPPORTS_KVM || X86
 	default y
 	---help---
 	  Say Y here to get to see options for using your Linux host to run other

@@ -16,7 +16,7 @@ if VIRTUALIZATION
 
 config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
-	depends on X86 && EXPERIMENTAL
+	depends on ARCH_SUPPORTS_KVM && EXPERIMENTAL
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 	---help---

index 105c5d6..397197f 100644
@@ -254,7 +254,7 @@ unifdef-y += kd.h
 unifdef-y += kernelcapi.h
 unifdef-y += kernel.h
 unifdef-y += keyboard.h
-unifdef-y += kvm.h
+unifdef-$(CONFIG_ARCH_SUPPORTS_KVM) += kvm.h
 unifdef-y += llc.h
 unifdef-y += loop.h
 unifdef-y += lp.h

1.5.3

What about adding a whitelist in hdrcheck.sh?

For all practical purposes in userspace the compile error due to the non-existing asm header should be fine, so there's no reason to change the code in such cases.

cu
Adrian

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

Hi, Andrew

I got following result in 'sync' command.
It was too slow. (memory controller config is off ;)
I attaches my .config.
==
[2.6.24-rc3-mm1]
[kamezawa@dr-test2 ~]$ dd if=/dev/zero of=./tmpfile bs=4096 count=100000 100000+0 records in
100000+0 records out
409600000 bytes (410 MB) copied, 1.46706 seconds, 279 MB/s [kamezawa@dr-test2 ~]$ time sync

real    3m6.440s
user    0m0.000s
sys     0m0.133s

on, 2.6.23-rc2-mm1, 2.6.23-rc3 there was no problem.
==
[2.6.24-rc3]
[kamezawa@dr-test2 ~]$ dd if=/dev/zero of=tmpfile bs=4096 count=100000 100000+0 records in
100000+0 records out
409600000 bytes (410 MB) copied, 2.07717 seconds, 197 MB/s [kamezawa@dr-test2 ~]$ time sync

real    0m9.935s
user    0m0.001s
sys     0m0.113s

[2.6.24-rc3]
[kamezawa@dr-test2 ~]$ dd if=/dev/zero of=./tmpfile bs=4096 count=100000 100000+0 records in
100000+0 records out
409600000 bytes (410 MB) copied, 1.37147 seconds, 299 MB/s [kamezawa@dr-test2 ~]$ time sync[2.6.24-rc2-mm1]

real    0m11.718s
user    0m0.000s
sys     0m0.138s

==
-Kame

Ah, one of cpu shows 100% iowait in 'top' command while this.

-Kame

Well I wonder how we did that.

It seems OK here from a quick test (i386, ext3-on-IDE).

Maybe device driver/block breakage?

I confirmed This slowdown is caused by git-scsi-misc.patch. I'm sorry that I can't chase more and will be offline in this weekend.

This is scsi_mod information in /proc/modules
=
scsi_mod 409416 8 mptctl,sg,lpfc,scsi_transport_fc,mptspi,mptscsih,scsi_transport_spi,sd_mod, Live 0xa000000202818000 =

What information should I provide more ?

Thanks,
-Kame

Hi, Andrew

(snip)

I tested x86, ext3-on-SATA(/dev/sda).
It seems works well.

Hmm...

kosaki

Try revert

http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=commitdiff_plain;h=8655a546c83fc43f0a73416bbd126d02de7ad6c0;hp=5bc717b6bdaaf52edf365eb7d9d8c89fec79df5d

See also :
http://lkml.org/lkml/2007/11/23/5

and search for '2.6.24-rc3-mm1: I/O error, system hangs' on LKML

IDE/SATA is fine here as well just SCSI broke

Regards,

Gabriel

Thank you!
The problem was fixed by reverting the patch you pointed out.

-Kame

USB mouse(Logitech M-BT58) doesn't work. TouchPad works. dmesg after rmmod usbcore && modprobe uhci_hcd:

usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000bf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.24-kas-alt1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
uhci_hcd 0000:00:1d.3: FGR not stopped yet!

Regards,  Kirill A. Shutemov
 + Belarus, Minsk
 + Velesys LLC, http://www.velesys.com/
 + ALT Linux Team, http://www.altlinux.com/

I've had some strangenesses with USB lately. Sometimes running `lsusb' makes the USB system notice a newly attached device.

Is that "FGR not stopped yet!" messgae new behaviour?

No. But I have new messages in dmesg:

uhci_hcd 0000:00:1d.3: FGR not stopped yet! uhci_hcd 0000:00:1d.2: FGR not stopped yet! uhci_hcd 0000:00:1d.1: FGR not stopped yet! uhci_hcd 0000:00:1d.0: FGR not stopped yet!

It is a new message since 2.6.24-rc3. I have never try -mm tree before.

Regards,  Kirill A. Shutemov
 + Belarus, Minsk
 + Velesys LLC, http://www.velesys.com/
 + ALT Linux Team, http://www.altlinux.com/

These messages could indicate a timing problem. You can see the code that writes the messages near the end of wakeup_rh() in drivers/usb/host/uhci-hcd.c.

The message gets written if the controller hardware hasn't turned off a particular bit after a 4-us delay. If the udelay() function wasn't working right, it could cause this problem.

Alan Stern

udelay() _is_ OK for 2.6.24-rc3, so it is not the cause of the problem

Marin Mitov

But is it OK for 2.6.24-rc3-mm1? Kirill said specifically that 2.6.24-rc3 does not display the message but 2.6.24-rc3-mm1 does.

Alan Stern

How can I test it?

Regards,  Kirill A. Shutemov
 + Belarus, Minsk
 + Velesys LLC, http://www.velesys.com/
 + ALT Linux Team, http://www.altlinux.com/

Add some printk statements to the wakeup_rh() routine: Display the value of inw(uhci->io_addr + USBCMD) in hex, both before and after the udelay(4) line. Try doing this for both 2.6.24-rc3 and 2.6.24-rc3-mm1 so you can compare the values for the two different kernels.

Also, enable CONFIG_PRINTK_TIME.

Alan Stern

Any progress? How about more recent kernels?

Alan Stern

Hello,

My system hangs shortly after I logged in Gnome desktop. SysRq-W shows that a bunch of task are blocked in "D" state, they seem to wait for some I/O completion. I can try to hand-copy some data if requested.

I found these messages in dmesg:

~$ grep -C2 end_request dmesg-2.6.24-rc3-mm1
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 16460
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
--
ReiserFS: sda7: Using r5 hash to sort names
sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdb, sector 19632
sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdb, sector 40037363
Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
lp0: using parport0 (interrupt-driven).

These errors occur *only* with 2.6.24-rc3-mm1, they are 100% reproducible. 2.6.24-rc3 and 2.6.24-rc2-mm1 are fine.

Maybe something is broken in pata_via driver ?

~~
laurent

(.config and dmesg before system hang are attached)

Linux version 2.6.24-rc3-mm1 (laurent@calimero) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #108 PREEMPT Wed Nov 21 18:30:32 CET 2007 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Entering add_active_range(0, 0, 131052) 0 entries of 256 used
sizeof(struct page) = 32
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131052
Movable zone start PFN for each node
early_node_map[1] active PFN ranges

    0:        0 ->   131052

On node 0 totalpages: 131052
Node 0 memmap at 0xC1000000 size 4194304 first pfn 0xC1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125965 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6A80, 0014 (r0 ASUS )
ACPI: RSDT 1FFEC000, 002C (r1 ASUS A7V133-C 30303031 MSFT 31313031)
ACPI: FACP 1FFEC080, 0074 (r1 ASUS A7V133-C 30303031 MSFT 31313031)
ACPI: DSDT 1FFEC100, 2CE1 (r1 ASUS A7V133-C 1000 MSFT 100000B)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFEC040, 0028 (r1 ASUS A7V133-C 30303031 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130029
Kernel command line: root=/dev/mapper/vglinux1-lv_ubuntu2 ro locale=fr_FR video=radeonfb:1280x1024@60 resume=/dev/mapper/vglinux1-lvswap Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01406000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=C03C2000 soft=C03C1000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1410.215 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 30
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024

... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192

memory used by lock dependency info: 992 kB
per task-struct memory footprint: 1200 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------

                     A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
             A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
         A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                    double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                  initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
                 bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |  ok  |
           recursive read-lock #2:             |  ok  |             |  ok  |
            mixed read-write-lock:             |  ok  |             |  ok  |
            mixed write-read-lock:             |  ok  |             |  ok  |
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
     hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
     soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
       sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
         hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
         soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
    hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
    soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
      hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
      soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |

-------------------------------------------------------
Good, all 218 testcases passed! |
---------------------------------
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 510792k/524208k available (1734k kernel code, 12768k reserved, 883k data, 184k init, 0k highmem) virtual kernel memory layout:

    fixmap  : 0xfffb5000 - 0xfffff000   ( 296 kB)
    vmalloc : 0xe0800000 - 0xfffb3000   ( 503 MB)
    lowmem  : 0xc0000000 - 0xdffec000   ( 511 MB)
      .init : 0xc0390000 - 0xc03be000   ( 184 kB)
      .data : 0xc02b18bc - 0xc038e504   ( 883 kB)
      .text : 0xc0100000 - 0xc02b18bc   (1734 kB)

Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2824.37 BogoMIPS (lpj=5648750) Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 00000000 Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(TM) XP 1600+ stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 356 Objects with 38 Devices 115 Methods 24 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0820)
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
khelper used greatest stack depth: 3172 bytes left
net_namespace: 76 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
khelper used greatest stack depth: 3064 bytes left
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:................................................ Initialized 16/24 Regions 2/2 Fields 19/19 Buffers 11/14 Packages (365 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 41 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region e200-e27f claimed by vt82c686 HW-mon
PCI quirk: region e800-e80f claimed by vt82c686 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfffe0000-0xffffffff could not be reserved
system 00:02: ioport range 0x3f0-0x3f1 has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0xe400-0xe47f has been reserved
system 00:03: ioport range 0xe800-0xe80f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: b7000000-b7ffffff
PREFETCH window: b8000000-cfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Switched to NOHz mode on CPU #0
Freeing initrd memory: 3197k freed
Simple Boot Flag at 0x3a set to 0x1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Applying VIA southbridge workaround.
PCI: VIA PCI bridge detected. Disabling DAC.
PCI: Disabling Via external APIC routing
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=166.00 MHz
radeonfb: PLL min 20000 max 40000
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
Console: switching to colour frame buffer device 160x64
radeonfb (0000:01:00.0): ATI Radeon Ya
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 16 throttling states)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input2
TCP cubic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 184k freed
Write protecting the kernel text: 1736k
Write protecting the kernel read-only data: 700k
busybox used greatest stack depth: 2900 bytes left
exe used greatest stack depth: 2864 bytes left
exe used greatest stack depth: 2852 bytes left
exe used greatest stack depth: 2824 bytes left
exe used greatest stack depth: 2712 bytes left
input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
consolechars used greatest stack depth: 2464 bytes left
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:04.1: version 0.3.3
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA
ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
ata1.01: 160086528 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33
ata2.01: ATAPI: CD-950E/AKU, A4Q, max MWDMA2, CDB intr
ata2.00: configured for UDMA/33
ata2.01: configured for MWDMA2

scsi 0:0:0:0: Direct-Access     ATA      ST340016A        3.75 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM            E-IDE    CD-950E/AKU      A4Q  PQ: 0 ANSI: 5

modprobe used greatest stack depth: 2152 bytes left
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
sd 0:0:1:0: [sdb] Attached SCSI disk
modprobe used greatest stack depth: 1964 bytes left
Attempting manual resume
ReiserFS: dm-10: found reiserfs format "3.6" with standard journal
ReiserFS: dm-10: using ordered data mode
ReiserFS: dm-10: journal params: device dm-10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-10: checking transaction log (dm-10)
ReiserFS: dm-10: Using r5 hash to sort names
exe used greatest stack depth: 1620 bytes left
Linux agpgart interface v0.102
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
agpgart: AGP aperture is 256M @ 0xd0000000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
via686a 0000:00:04.4: Forcing ISA address 0xe200
via686a 0000:00:04.4: Enabling sensors
parport_pc: VIA parallel port: io=0x378, irq=7
usbcore: registered new device driver usb
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
PCI: Enabling device 0000:00:0b.0 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL-8029 found at 0x9400, IRQ 11, 00:40:95:46:6e:2d.
ACPI: I/O resource vt596_smbus [0xe800-0xe807] conflicts with ACPI region SM00 [0xe800-0xe806]
ACPI: Device needs an ACPI driver
vt596_smbus: probe of 0000:00:04.4 failed with error -16
PCI: Enabling device 0000:00:09.0 (0014 -> 0016)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
input: PC Speaker as /class/input/input4
USB Universal Host Controller Interface driver v3.0
modprobe used greatest stack depth: 1552 bytes left
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
scsi 1:0:1:0: Attached scsi generic sg3 type 5
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[b6800000-b68007ff] Max Packet=[2048] IR/IT contexts=[8/8]
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:04.2: UHCI Host Controller
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:04.2: irq 5, io base 0x0000b400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.24-rc3-mm1 uhci_hcd
usb usb1: SerialNumber: 0000:00:04.2
ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:04.3: UHCI Host Controller
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:04.3: irq 5, io base 0x0000b000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.24-rc3-mm1 uhci_hcd
usb usb2: SerialNumber: 0000:00:04.3
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1: new device found, idVendor=05e3, idProduct=0606
usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
PCI: Enabling device 0000:00:0d.0 (0004 -> 0005)
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0120e085ca]
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
Loading Reiser4. See www.namesys.com for a description of Reiser4.
reiser4: dm-5: found disk format 4.0.0.
reiser4: dm-4: found disk format 4.0.0.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 16460
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdb, sector 19632
sd 0:0:1:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdb, sector 40037363
Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k
lp0: using parport0 (interrupt-driven).
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.28.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
warning: process `avahi-daemon' sets w/ old libcap
warning: process `avahi-daemon' sets w/ old libcap
warning: process `avahi-daemon' sets w/ old libcap
warning: process `avahi-daemon' sets w/ old libcap
SysRq : Show Blocked State
task PC stack pid father
SysRq : Show Blocked State
task PC stack pid father
SysRq : Show Blocked State
task PC stack pid father
python used greatest stack depth: 1468 bytes left

#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc3-mm1
# Wed Nov 21 18:02:26 2007
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hdb6"
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_PLATFORM=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_USB_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set

#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #

#

# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=m
# CONFIG_USB_XUSBATM is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_VIRTUALIZATION is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Layered filesystems
#
CONFIG_ECRYPT_FS=m
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y