2.6.24-rc3-git3: usb hardware interrupts using 25% of CPU time
I installed Linux 2.6.24-rc3-git3 on a PPC based Apple Powerbook G4 system. Now with top I see that over 20% of CPU time is used by hardware interrupts. Looking at /proc/interrupts, the number in the row ohci_hcd:usb1 is rising very quickly:
$ cat /proc/interrupts
CPU0
21: 1 MPIC 1 Edge i2sbus: i2s-a (tx)
24: 11008 MPIC 1 Level ide1
25: 33608 MPIC 1 Level VIA-PMU
26: 56 MPIC 1 Level keywest i2c
27: 1 MPIC 1 Edge i2sbus: i2s-a (rx)
29: 281578 MPIC 1 Level ohci_hcd:usb1
30: 0 MPIC 1 Level i2sbus: i2s-a (control)
31: 0 MPIC 1 Level i2sbus: i2s-b (control)
33: 1 MPIC 1 Edge i2sbus: i2s-b (tx)
34: 1 MPIC 1 Edge i2sbus: i2s-b (rx)
39: 41611 MPIC 1 Level ide0
40: 2 MPIC 1 Level ohci1394
41: 0 MPIC 1 Level eth0
42: 0 MPIC 1 Level keywest i2c
47: 2826 MPIC 1 Level GPIO1 ADB
48: 58633 MPIC 1 Level radeon@pci:0000:00:10.0
52: 18961 MPIC 1 Level b43
53: 1 MPIC 1 Level yenta
61: 1 MPIC 1 Edge headphone-detect
63: 0 MPIC 1 Level ohci_hcd:usb2, ohci_hcd:usb3,
ehci_hcd:usb4
BAD: 187917$ lspci -nn 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034] 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50] 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035] 0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) 0001:10:13.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56] 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e] 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] 0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] 0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) 0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036] 0002:24:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b] 0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) 0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
Full dmesg, .config and lsmod output can be found on
http://artipc10.vub.ac.be/linux-2.6.24-rc3-git3/
Signature · 1 line
Frederik Himpe
Quoted 4 lines · Frederik Himpe
I installed Linux 2.6.24-rc3-git3 on a PPC based Apple Powerbook G4 system. Now with top I see that over 20% of CPU time is used by hardware interrupts. Looking at
/proc/interrupts, the number in the row ohci_hcd:usb1 is rising very quickly:
Hi Frederik,
Thanks for the report. We suspect that this is an accounting
problem introduced when powerpc enabled NO_HZ and highres timers. Fortunatley from the testing we've done it doens't actually look like the time is being spent in hardware interupts, just accounted for there.
Yours Tony
linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!
Quoted 4 lines · Frederik Himpe
I installed Linux 2.6.24-rc3-git3 on a PPC based Apple Powerbook G4 system. Now with top I see that over 20% of CPU time is used by hardware interrupts. Looking at
/proc/interrupts, the number in the row ohci_hcd:usb1 is rising very quickly:
What's the last kernel that worked correctly?
Quoted 60 lines
$ cat /proc/interrupts CPU0 21: 1 MPIC 1 Edge i2sbus: i2s-a (tx) 24: 11008 MPIC 1 Level ide1 25: 33608 MPIC 1 Level VIA-PMU 26: 56 MPIC 1 Level keywest i2c 27: 1 MPIC 1 Edge i2sbus: i2s-a (rx) 29: 281578 MPIC 1 Level ohci_hcd:usb1 30: 0 MPIC 1 Level i2sbus: i2s-a (control) 31: 0 MPIC 1 Level i2sbus: i2s-b (control) 33: 1 MPIC 1 Edge i2sbus: i2s-b (tx) 34: 1 MPIC 1 Edge i2sbus: i2s-b (rx) 39: 41611 MPIC 1 Level ide0 40: 2 MPIC 1 Level ohci1394 41: 0 MPIC 1 Level eth0 42: 0 MPIC 1 Level keywest i2c 47: 2826 MPIC 1 Level GPIO1 ADB 48: 58633 MPIC 1 Level radeon@pci:0000:00:10.0 52: 18961 MPIC 1 Level b43 53: 1 MPIC 1 Level yenta 61: 1 MPIC 1 Edge headphone-detect 63: 0 MPIC 1 Level ohci_hcd:usb2, ohci_hcd:usb3, ehci_hcd:usb4 BAD: 187917$ lspci -nn 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034] 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50] 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035] 0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) 0001:10:13.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56] 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e] 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] 0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] 0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) 0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) 0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036] 0002:24:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b] 0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) 0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)Full dmesg, .config and lsmod output can be found on
http://artipc10.vub.ac.be/linux-2.6.24-rc3-git3/
Quoted 7 lines · Rafael J. Wysocki
Quoted 4 lines · Frederik Himpe
I installed Linux 2.6.24-rc3-git3 on a PPC based Apple Powerbook G4 system. Now with top I see that over 20% of CPU time is used by hardware interrupts. Looking at
/proc/interrupts, the number in the row ohci_hcd:usb1 is rising very quickly:What's the last kernel that worked correctly?
Actually I'm not sure: the kernel I was running before was Debian's 2.6.22 kernel package
Signature · 1 line
Frederik