Skip to contentSkip to conversation

Enable SSB_DRIVER_EXTIF on BCM47XX platform

PATCH New Aurelien Jarno 1 participant 3 messages Dec 10, 2007 – Jan 11, 2008 MIPS

lore
Share & tools
lore

Aurelien Jarno

author
#0 lore raw

PATCH 1/1 Enable SSB_DRIVER_EXTIF on BCM47XX platform

Hi,

arch/mips/bcm47xx/gpio.c uses ssb_extif_* functions. The patch below makes sure those functions are available on the BCM47XX platform.

Aurelien

Signed-off-by Aurelien Jarno <[email protected]>
arch/mips/Kconfig +1 -0
index c6fc405..e46b076 100644
@@ -59,6 +59,7 @@ config BCM47XX
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SSB
 	select SSB_DRIVER_MIPS
+	select SSB_DRIVER_EXTIF
 	select GENERIC_GPIO
 	select SYS_HAS_EARLY_PRINTK
 	select CFE
Signature · 4 lines
  .''`.  Aurelien Jarno	            | GPG: 1024D/F1BCDB73
 : :' :  Debian developer           | Electrical Engineer
 `. `'   [email protected]         | [email protected]
   `-    people.debian.org/~aurel32 | www.aurel32.net
author
#1 lore raw

PATCH 1/1 Kconfig fixes for BCM47XX platform

Hi,

The patch below fixes two problems for Kconfig on the BCM47xx platform:
- arch/mips/bcm47xx/gpio.c uses ssb_extif_* functions. Selecting SSB_DRIVER_EXTIF makes sure those functions are available.
- arch/mips/pci/pci.c needs, when enabled, platform specific functions, which are defined when SSB_PCICORE_HOSTMODE is enabled.

This patch replaces the one called "Enable SSB_DRIVER_EXTIF on BCM47XX platform" posted yesterday.

Aurelien

Signed-off-by Aurelien Jarno <[email protected]>
arch/mips/Kconfig +2 -0
index c6fc405..b4ffcae 100644
@@ -59,6 +59,8 @@ config BCM47XX
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SSB
 	select SSB_DRIVER_MIPS
+	select SSB_DRIVER_EXTIF
+	select SSB_PCICORE_HOSTMODE if PCI
 	select GENERIC_GPIO
 	select SYS_HAS_EARLY_PRINTK
 	select CFE
Signature · 4 lines
  .''`.  Aurelien Jarno	            | GPG: 1024D/F1BCDB73
 : :' :  Debian developer           | Electrical Engineer
 `. `'   [email protected]         | [email protected]
   `-    people.debian.org/~aurel32 | www.aurel32.net
author
#2 lore raw

Re: [PATCH][MIPS] Kconfig fixes for BCM47XX platform

Quoted 21 lines · Aurelien Jarno

Hi,

The patch below fixes two problems for Kconfig on the BCM47xx platform:
- arch/mips/bcm47xx/gpio.c uses ssb_extif_* functions. Selecting SSB_DRIVER_EXTIF makes sure those functions are available.
- arch/mips/pci/pci.c needs, when enabled, platform specific functions, which are defined when SSB_PCICORE_HOSTMODE is enabled.

This patch replaces the one called "Enable SSB_DRIVER_EXTIF on BCM47XX platform" posted yesterday.

Aurelien

Signed-off-by Aurelien Jarno <[email protected]>
arch/mips/Kconfig +0 -0
index c6fc405..b4ffcae 100644

arch/mips/Kconfig config BCM47XX · line 66

Quoted 8 lines
arch/mips/Kconfig +2 -0
@@ -59,6 +59,8 @@ config BCM47XX
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SSB
 	select SSB_DRIVER_MIPS
+	select SSB_DRIVER_EXTIF
+	select SSB_PCICORE_HOSTMODE if PCI
 	select GENERIC_GPIO
 	select SYS_HAS_EARLY_PRINTK
 	select CFE

Any news about this patch?

Signature · 4 lines
  .''`.  Aurelien Jarno	            | GPG: 1024D/F1BCDB73
 : :' :  Debian developer           | Electrical Engineer
 `. `'   [email protected]         | [email protected]
   `-    people.debian.org/~aurel32 | www.aurel32.net