Making uboot.bin
Hello Friends,
I am entirely new to uboot.
I had read the uboot manual and have a small grasp over it. I am working on MPC8323E-RDB board.
I have following questions for you:-
1. Can we use uboot only for booting Linux?
2. Is the kernel necessary for the board or standalone application alone can serve the purpose?
3. How big can be the size of standalone applications?
4. The uboot is already installed by manufacturer on my board, can i take
the backup of that from board?
5. For porting uboot to a board what cross compilation tools are required? If ELDK can serve this purpose?
Plz do reply
Thanks,
Muneet Garg
Signature · 2 lines
View this message in context: http://www.nabble.com/Making-uboot.bin-tp14268613p14268613.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 9 lines · Muneet
Hello Friends,
I am entirely new to uboot.
I had read the uboot manual and have a small grasp over it. I am working on MPC8323E-RDB board.I have following questions for you:-
1. Can we use uboot only for booting Linux?
No, it has been used to boot other OSes (e.g. vxWorks).
Quoted 2 lines
2. Is the kernel necessary for the board or standalone application alone can serve the purpose?
A standalone application can do the job if you write it to do the job. Therein lies the rub: a kernel takes care of a lot of low level details that take a lot of time to rewrite.
If you application is simple, standalone application code can do the job. Since you are running on MPC8323, that would imply your application isn't simple.
Quoted 1 line
3. How big can be the size of standalone applications?
Nearly as big as the memory on your board.
Quoted 2 lines
4. The uboot is already installed by manufacturer on my board, can i take
the backup of that from board?
Yes, but that is dependent on your tools and generally is more difficult than it is worth. You have access to the source of the u-boot image on the board (thanks to the GPL). You should be able to rebuild the image from source. That is a good exercise to proof out your build tools and techniques before you start building custom (broken) builds and wonder if the brokenness is your tools, your technique, or your modified code.
Quoted 2 lines
5. For porting uboot to a board what cross compilation tools are required? If ELDK can serve this purpose?
ELDK is what 97% of the u-boot developers use (...and 89.3% of all statistics are made up).
Quoted 4 lines
Plz do reply
Thanks,
Muneet Garg
Best regards,
gvb
Quoted 4 lines · In message <[email protected]> you wrote:
I have following questions for you:-
1. Can we use uboot only for booting Linux?
No, you cannot. It will happily boot other OS's as well.
Quoted 2 lines
2. Is the kernel necessary for the board or standalone application alone can serve the purpose?
This depends on that you want to do. If you need an OS, you will want to boot Linix. If you want a simple plain stupid test environment, a standalone application may do.
Quoted 1 line
3. How big can be the size of standalone applications?
How much memory do you have?
Quoted 2 lines
4. The uboot is already installed by manufacturer on my board, can i take
the backup of that from board?
Yes, of course you can. U-Boot comes under GPL and you can copy it as often as you want.
Quoted 2 lines
5. For porting uboot to a board what cross compilation tools are required? If ELDK can serve this purpose?
Yes, of course it can. We use it in all our work.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de How many NASA managers does it take to screw in a lightbulb? "That's a known problem... don't worry about it."