Skip to contentSkip to conversation

adt7470: Support per-sensor alarm files

PATCH In review Darrick J. Wong 3 participants 7 messages Dec 19, 2007 – Jan 27, 2008 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 adt7470: Support per-sensor alarm files

Remove the old alarms sysfs hack and replace it with per-sensor alarm files. Also don't read the second alarm register if it's not needed.

---

 drivers/hwmon/adt7470.c |   97 ++++++++++++++++++++++++++++++++++++++++++-----
 1 files changed, 86 insertions(+), 11 deletions(-)
drivers/hwmon/adt7470.c +86 -11
index a215560..59ba7e5 100644
@@ -48,7 +48,22 @@ I2C_CLIENT_INSMOD_1(adt7470);
 #define ADT7470_REG_CFG				0x40
 #define		ADT7470_FSPD_MASK		0x04
 #define ADT7470_REG_ALARM1			0x41
+#define		ADT7470_R1T_ALARM		0x01
+#define		ADT7470_R2T_ALARM		0x02
+#define		ADT7470_R3T_ALARM		0x04
+#define		ADT7470_R4T_ALARM		0x08
+#define		ADT7470_R5T_ALARM		0x10
+#define		ADT7470_R6T_ALARM		0x20
+#define		ADT7470_R7T_ALARM		0x40
+#define		ADT7470_OOL_ALARM		0x80
 #define ADT7470_REG_ALARM2			0x42
+#define		ADT7470_R8T_ALARM		0x01
+#define		ADT7470_R9T_ALARM		0x02
+#define		ADT7470_R10T_ALARM		0x04
+#define		ADT7470_FAN1_ALARM		0x10
+#define		ADT7470_FAN2_ALARM		0x20
+#define		ADT7470_FAN3_ALARM		0x40
+#define		ADT7470_FAN4_ALARM		0x80
 #define ADT7470_REG_TEMP_LIMITS_BASE_ADDR	0x44
 #define ADT7470_REG_TEMP_LIMITS_MAX_ADDR	0x57
 #define ADT7470_REG_FAN_MIN_BASE_ADDR		0x58
@@ -97,6 +112,8 @@ I2C_CLIENT_INSMOD_1(adt7470);
 #define ADT7470_REG_PWM_AUTO_TEMP(x)	(ADT7470_REG_PWM_AUTO_TEMP_BASE_ADDR + \
 					((x) / 2))
 
+#define ALARM2(x)		((x) << 8)
+
 #define ADT7470_VENDOR		0x41
 #define ADT7470_DEVICE		0x70
 /* datasheet only mentions a revision 2 */
@@ -136,7 +153,8 @@ struct adt7470_data {
 	u16			fan[ADT7470_FAN_COUNT];
 	u16			fan_min[ADT7470_FAN_COUNT];
 	u16			fan_max[ADT7470_FAN_COUNT];
-	u16			alarms, alarms_mask;
+	u8			alarm1, alarm2;
+	u16			alarms_mask;
 	u8			force_pwm_max;
 	u8			pwm[ADT7470_PWM_COUNT];
 	u8			pwm_max[ADT7470_PWM_COUNT];
@@ -260,7 +278,12 @@ static struct adt7470_data *adt7470_update_device(struct device *dev)
 	else
 		data->force_pwm_max = 0;
 
-	data->alarms = adt7470_read_word_data(client, ADT7470_REG_ALARM1);
+	data->alarm1 = i2c_smbus_read_byte_data(client, ADT7470_REG_ALARM1);
+	if (data->alarm2 & ADT7470_OOL_ALARM)
+		data->alarm2 = i2c_smbus_read_byte_data(client,
+							ADT7470_REG_ALARM2);
+	else
+		data->alarm2 = 0;
 	data->alarms_mask = adt7470_read_word_data(client,
 						   ADT7470_REG_ALARM1_MASK);
 
@@ -368,17 +391,13 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 	return sprintf(buf, "%d\n", 1000 * data->temp[attr->index]);
 }
 
-static ssize_t show_alarms(struct device *dev,
+static ssize_t show_alarm_mask(struct device *dev,
 			   struct device_attribute *devattr,
 			   char *buf)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = adt7470_update_device(dev);
 
-	if (attr->index)
-		return sprintf(buf, "%x\n", data->alarms);
-	else
-		return sprintf(buf, "%x\n", data->alarms_mask);
+	return sprintf(buf, "%x\n", data->alarms_mask);
 }
 
 static ssize_t show_fan_max(struct device *dev,
@@ -713,8 +732,21 @@ static ssize_t set_pwm_auto_temp(struct device *dev,
 	return count;
 }
 
-static SENSOR_DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL, 0);
-static SENSOR_DEVICE_ATTR(alarm_mask, S_IRUGO, show_alarms, NULL, 1);
+static ssize_t show_alarm(struct device *dev,
+			  struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7470_data *data = adt7470_update_device(dev);
+
+	if (data->alarm1 & (attr->index & 0xFF) ||
+	    data->alarm2 & (attr->index >> 8))
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+static SENSOR_DEVICE_ATTR(alarm_mask, S_IRUGO, show_alarm_mask, NULL, 0);
 
 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
 		    set_temp_max, 0);
@@ -769,6 +801,27 @@ static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7);
 static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8);
 static SENSOR_DEVICE_ATTR(temp10_input, S_IRUGO, show_temp, NULL, 9);
 
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R1T_ALARM);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R2T_ALARM);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R3T_ALARM);
+static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R4T_ALARM);
+static SENSOR_DEVICE_ATTR(temp5_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R5T_ALARM);
+static SENSOR_DEVICE_ATTR(temp6_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R6T_ALARM);
+static SENSOR_DEVICE_ATTR(temp7_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R7T_ALARM);
+static SENSOR_DEVICE_ATTR(temp8_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R8T_ALARM);
+static SENSOR_DEVICE_ATTR(temp9_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R9T_ALARM);
+static SENSOR_DEVICE_ATTR(temp10_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R10T_ALARM);
+
 static SENSOR_DEVICE_ATTR(fan1_max, S_IWUSR | S_IRUGO, show_fan_max,
 		    set_fan_max, 0);
 static SENSOR_DEVICE_ATTR(fan2_max, S_IWUSR | S_IRUGO, show_fan_max,
@@ -792,6 +845,15 @@ static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
 static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
 
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN1_ALARM));
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN2_ALARM));
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN3_ALARM));
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN4_ALARM));
+
 static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO,
 		    show_force_pwm_max, set_force_pwm_max, 0);
 
@@ -856,7 +918,6 @@ static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO,
 
 static struct attribute *adt7470_attr[]  {
-	&sensor_dev_attr_alarms.dev_attr.attr,
 	&sensor_dev_attr_alarm_mask.dev_attr.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -888,6 +949,16 @@ static struct attribute *adt7470_attr[]  	&sensor_dev_attr_temp8_input.dev_attr.attr,
 	&sensor_dev_attr_temp9_input.dev_attr.attr,
 	&sensor_dev_attr_temp10_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp4_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp5_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp6_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp7_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp8_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp9_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp10_alarm.dev_attr.attr,
 	&sensor_dev_attr_fan1_max.dev_attr.attr,
 	&sensor_dev_attr_fan2_max.dev_attr.attr,
 	&sensor_dev_attr_fan3_max.dev_attr.attr,
@@ -900,6 +971,10 @@ static struct attribute *adt7470_attr[]  	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan3_input.dev_attr.attr,
 	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
 	&sensor_dev_attr_force_pwm_max.dev_attr.attr,
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_pwm2.dev_attr.attr,
 

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#1 lore raw

Hi Darrick,

Quoted 2 lines · Darrick J. Wong

Remove the old alarms sysfs hack and replace it with per-sensor alarm files. Also don't read the second alarm register if it's not needed.

Thanks for doing this, I appreciate it. There are so many drivers left to convert...

In general we keep the all-in-one alarms file for compatibility, but given that this driver is fairly new and libsensors never had specific support for it anyway, it's probably OK to drop it this time.

Quoted 44 lines

---

 drivers/hwmon/adt7470.c |   97 ++++++++++++++++++++++++++++++++++++++++++-----
 1 files changed, 86 insertions(+), 11 deletions(-)
drivers/hwmon/adt7470.c +17 -0
index a215560..59ba7e5 100644
@@ -48,7 +48,22 @@ I2C_CLIENT_INSMOD_1(adt7470);
 #define ADT7470_REG_CFG				0x40
 #define		ADT7470_FSPD_MASK		0x04
 #define ADT7470_REG_ALARM1			0x41
+#define		ADT7470_R1T_ALARM		0x01
+#define		ADT7470_R2T_ALARM		0x02
+#define		ADT7470_R3T_ALARM		0x04
+#define		ADT7470_R4T_ALARM		0x08
+#define		ADT7470_R5T_ALARM		0x10
+#define		ADT7470_R6T_ALARM		0x20
+#define		ADT7470_R7T_ALARM		0x40
+#define		ADT7470_OOL_ALARM		0x80
 #define ADT7470_REG_ALARM2			0x42
+#define		ADT7470_R8T_ALARM		0x01
+#define		ADT7470_R9T_ALARM		0x02
+#define		ADT7470_R10T_ALARM		0x04
+#define		ADT7470_FAN1_ALARM		0x10
+#define		ADT7470_FAN2_ALARM		0x20
+#define		ADT7470_FAN3_ALARM		0x40
+#define		ADT7470_FAN4_ALARM		0x80
 #define ADT7470_REG_TEMP_LIMITS_BASE_ADDR	0x44
 #define ADT7470_REG_TEMP_LIMITS_MAX_ADDR	0x57
 #define ADT7470_REG_FAN_MIN_BASE_ADDR		0x58
@@ -97,6 +112,8 @@ I2C_CLIENT_INSMOD_1(adt7470);
 #define ADT7470_REG_PWM_AUTO_TEMP(x)	(ADT7470_REG_PWM_AUTO_TEMP_BASE_ADDR + \
 					((x) / 2))
 
+#define ALARM2(x)		((x) << 8)
+
 #define ADT7470_VENDOR		0x41
 #define ADT7470_DEVICE		0x70
 /* datasheet only mentions a revision 2 */

drivers/hwmon/adt7470.c struct adt7470_data { · line 157

Quoted 6 lines
drivers/hwmon/adt7470.c +2 -1
@@ -136,7 +153,8 @@ struct adt7470_data {
 	u16			fan[ADT7470_FAN_COUNT];
 	u16			fan_min[ADT7470_FAN_COUNT];
 	u16			fan_max[ADT7470_FAN_COUNT];
-	u16			alarms, alarms_mask;
+	u8			alarm1, alarm2;
+	u16			alarms_mask;

I don't think that you win anything by splitting the alarm field. In fact it makes your code more complex than it needs to be. When converting the other drivers, I've always kept a single field for the alarms.

drivers/hwmon/adt7470.c static struct adt7470_data *adt7470_update_device(struct device *dev) · line 282

Quoted 10 lines
drivers/hwmon/adt7470.c +2 -1
 	u8			force_pwm_max;
 	u8			pwm[ADT7470_PWM_COUNT];
 	u8			pwm_max[ADT7470_PWM_COUNT];
@@ -260,7 +278,12 @@ static struct adt7470_data *adt7470_update_device(struct device *dev)
 	else
 		data->force_pwm_max = 0;
 
-	data->alarms = adt7470_read_word_data(client, ADT7470_REG_ALARM1);
+	data->alarm1 = i2c_smbus_read_byte_data(client, ADT7470_REG_ALARM1);
+	if (data->alarm2 & ADT7470_OOL_ALARM)

You certainly mean data->alarm1.

Quoted 32 lines
drivers/hwmon/adt7470.c +6 -7
+		data->alarm2 = i2c_smbus_read_byte_data(client,
+							ADT7470_REG_ALARM2);
+	else
+		data->alarm2 = 0;
 	data->alarms_mask = adt7470_read_word_data(client,
 						   ADT7470_REG_ALARM1_MASK);
 
@@ -368,17 +391,13 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 	return sprintf(buf, "%d\n", 1000 * data->temp[attr->index]);
 }
 
-static ssize_t show_alarms(struct device *dev,
+static ssize_t show_alarm_mask(struct device *dev,
 			   struct device_attribute *devattr,
 			   char *buf)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = adt7470_update_device(dev);
 
-	if (attr->index)
-		return sprintf(buf, "%x\n", data->alarms);
-	else
-		return sprintf(buf, "%x\n", data->alarms_mask);
+	return sprintf(buf, "%x\n", data->alarms_mask);
 }
 
 static ssize_t show_fan_max(struct device *dev,
@@ -713,8 +732,21 @@ static ssize_t set_pwm_auto_temp(struct device *dev,
 	return count;
 }
 
-static SENSOR_DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL, 0);

drivers/hwmon/adt7470.c static ssize_t set_pwm_auto_temp(struct device *dev, · line 743

Quoted 10 lines
drivers/hwmon/adt7470.c +9 -1
-static SENSOR_DEVICE_ATTR(alarm_mask, S_IRUGO, show_alarms, NULL, 1);
+static ssize_t show_alarm(struct device *dev,
+			  struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7470_data *data = adt7470_update_device(dev);
+
+	if (data->alarm1 & (attr->index & 0xFF) ||
+	    data->alarm2 & (attr->index >> 8))

That's a complex way to write it... It would be more simple with a 16-bit data->alarm field. Please see the lm83 driver for an example.

drivers/hwmon/adt7470.c static ssize_t set_pwm_auto_temp(struct device *dev, · line 749

Quoted 6 lines
drivers/hwmon/adt7470.c +6 -0
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+static SENSOR_DEVICE_ATTR(alarm_mask, S_IRUGO, show_alarm_mask, NULL, 0);

Note that this could become a simple DEVICE_ATTR now.

Quoted 17 lines
drivers/hwmon/adt7470.c +10 -0
 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
 		    set_temp_max, 0);
@@ -769,6 +801,27 @@ static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7);
 static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8);
 static SENSOR_DEVICE_ATTR(temp10_input, S_IRUGO, show_temp, NULL, 9);
 
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R1T_ALARM);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R2T_ALARM);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R3T_ALARM);
+static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R4T_ALARM);
+static SENSOR_DEVICE_ATTR(temp5_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R5T_ALARM);

drivers/hwmon/adt7470.c static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7); · line 823

Quoted 10 lines
drivers/hwmon/adt7470.c +10 -0
+static SENSOR_DEVICE_ATTR(temp6_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R6T_ALARM);
+static SENSOR_DEVICE_ATTR(temp7_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R7T_ALARM);
+static SENSOR_DEVICE_ATTR(temp8_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R8T_ALARM);
+static SENSOR_DEVICE_ATTR(temp9_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R9T_ALARM);
+static SENSOR_DEVICE_ATTR(temp10_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R10T_ALARM);

Missing ALARM2() for temp8, temp9 and temp10.

Quoted 53 lines
drivers/hwmon/adt7470.c +24 -1
+
 static SENSOR_DEVICE_ATTR(fan1_max, S_IWUSR | S_IRUGO, show_fan_max,
 		    set_fan_max, 0);
 static SENSOR_DEVICE_ATTR(fan2_max, S_IWUSR | S_IRUGO, show_fan_max,
@@ -792,6 +845,15 @@ static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
 static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
 
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN1_ALARM));
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN2_ALARM));
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN3_ALARM));
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN4_ALARM));
+
 static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO,
 		    show_force_pwm_max, set_force_pwm_max, 0);
 
@@ -856,7 +918,6 @@ static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO,
 
 static struct attribute *adt7470_attr[] >  {
-	&sensor_dev_attr_alarms.dev_attr.attr,
 	&sensor_dev_attr_alarm_mask.dev_attr.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
@@ -888,6 +949,16 @@ static struct attribute *adt7470_attr[] >  	&sensor_dev_attr_temp8_input.dev_attr.attr,
 	&sensor_dev_attr_temp9_input.dev_attr.attr,
 	&sensor_dev_attr_temp10_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp4_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp5_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp6_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp7_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp8_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp9_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp10_alarm.dev_attr.attr,
 	&sensor_dev_attr_fan1_max.dev_attr.attr,
 	&sensor_dev_attr_fan2_max.dev_attr.attr,
 	&sensor_dev_attr_fan3_max.dev_attr.attr,
@@ -900,6 +971,10 @@ static struct attribute *adt7470_attr[] >  	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan3_input.dev_attr.attr,
 	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
 	&sensor_dev_attr_force_pwm_max.dev_attr.attr,
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_pwm2.dev_attr.attr,
Signature · 6 lines
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
#2 lore raw
Quoted 3 lines · Jean Delvare

In general we keep the all-in-one alarms file for compatibility, but given that this driver is fairly new and libsensors never had specific support for it anyway, it's probably OK to drop it this time.

Thanks for the code review. I've made the changes you asked for and here's a new patch to supersede yesterday's.
---
Remove the old alarms hack and replace it with per-sensor alarm files.

---

 drivers/hwmon/adt7470.c |   96 +++++++++++++++++++++++++++++++++++++++++------
 1 files changed, 84 insertions(+), 12 deletions(-)
drivers/hwmon/adt7470.c +84 -12
index a215560..747693a 100644
@@ -48,7 +48,22 @@ I2C_CLIENT_INSMOD_1(adt7470);
 #define ADT7470_REG_CFG				0x40
 #define		ADT7470_FSPD_MASK		0x04
 #define ADT7470_REG_ALARM1			0x41
+#define		ADT7470_R1T_ALARM		0x01
+#define		ADT7470_R2T_ALARM		0x02
+#define		ADT7470_R3T_ALARM		0x04
+#define		ADT7470_R4T_ALARM		0x08
+#define		ADT7470_R5T_ALARM		0x10
+#define		ADT7470_R6T_ALARM		0x20
+#define		ADT7470_R7T_ALARM		0x40
+#define		ADT7470_OOL_ALARM		0x80
 #define ADT7470_REG_ALARM2			0x42
+#define		ADT7470_R8T_ALARM		0x01
+#define		ADT7470_R9T_ALARM		0x02
+#define		ADT7470_R10T_ALARM		0x04
+#define		ADT7470_FAN1_ALARM		0x10
+#define		ADT7470_FAN2_ALARM		0x20
+#define		ADT7470_FAN3_ALARM		0x40
+#define		ADT7470_FAN4_ALARM		0x80
 #define ADT7470_REG_TEMP_LIMITS_BASE_ADDR	0x44
 #define ADT7470_REG_TEMP_LIMITS_MAX_ADDR	0x57
 #define ADT7470_REG_FAN_MIN_BASE_ADDR		0x58
@@ -97,6 +112,8 @@ I2C_CLIENT_INSMOD_1(adt7470);
 #define ADT7470_REG_PWM_AUTO_TEMP(x)	(ADT7470_REG_PWM_AUTO_TEMP_BASE_ADDR + \
 					((x) / 2))
 
+#define ALARM2(x)		((x) << 8)
+
 #define ADT7470_VENDOR		0x41
 #define ADT7470_DEVICE		0x70
 /* datasheet only mentions a revision 2 */
@@ -136,7 +153,8 @@ struct adt7470_data {
 	u16			fan[ADT7470_FAN_COUNT];
 	u16			fan_min[ADT7470_FAN_COUNT];
 	u16			fan_max[ADT7470_FAN_COUNT];
-	u16			alarms, alarms_mask;
+	u16			alarm;
+	u16			alarms_mask;
 	u8			force_pwm_max;
 	u8			pwm[ADT7470_PWM_COUNT];
 	u8			pwm_max[ADT7470_PWM_COUNT];
@@ -260,7 +278,10 @@ static struct adt7470_data *adt7470_update_device(struct device *dev)
 	else
 		data->force_pwm_max = 0;
 
-	data->alarms = adt7470_read_word_data(client, ADT7470_REG_ALARM1);
+	data->alarm = i2c_smbus_read_byte_data(client, ADT7470_REG_ALARM1);
+	if (data->alarm & ADT7470_OOL_ALARM)
+		data->alarm |= ALARM2(i2c_smbus_read_byte_data(client,
+							ADT7470_REG_ALARM2));
 	data->alarms_mask = adt7470_read_word_data(client,
 						   ADT7470_REG_ALARM1_MASK);
 
@@ -368,17 +389,13 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 	return sprintf(buf, "%d\n", 1000 * data->temp[attr->index]);
 }
 
-static ssize_t show_alarms(struct device *dev,
+static ssize_t show_alarm_mask(struct device *dev,
 			   struct device_attribute *devattr,
 			   char *buf)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct adt7470_data *data = adt7470_update_device(dev);
 
-	if (attr->index)
-		return sprintf(buf, "%x\n", data->alarms);
-	else
-		return sprintf(buf, "%x\n", data->alarms_mask);
+	return sprintf(buf, "%x\n", data->alarms_mask);
 }
 
 static ssize_t show_fan_max(struct device *dev,
@@ -713,8 +730,20 @@ static ssize_t set_pwm_auto_temp(struct device *dev,
 	return count;
 }
 
-static SENSOR_DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL, 0);
-static SENSOR_DEVICE_ATTR(alarm_mask, S_IRUGO, show_alarms, NULL, 1);
+static ssize_t show_alarm(struct device *dev,
+			  struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7470_data *data = adt7470_update_device(dev);
+
+	if (data->alarm & attr->index)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+static DEVICE_ATTR(alarm_mask, S_IRUGO, show_alarm_mask, NULL);
 
 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
 		    set_temp_max, 0);
@@ -769,6 +798,27 @@ static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7);
 static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8);
 static SENSOR_DEVICE_ATTR(temp10_input, S_IRUGO, show_temp, NULL, 9);
 
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R1T_ALARM);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R2T_ALARM);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R3T_ALARM);
+static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R4T_ALARM);
+static SENSOR_DEVICE_ATTR(temp5_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R5T_ALARM);
+static SENSOR_DEVICE_ATTR(temp6_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R6T_ALARM);
+static SENSOR_DEVICE_ATTR(temp7_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7470_R7T_ALARM);
+static SENSOR_DEVICE_ATTR(temp8_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_R8T_ALARM));
+static SENSOR_DEVICE_ATTR(temp9_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_R9T_ALARM));
+static SENSOR_DEVICE_ATTR(temp10_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_R10T_ALARM));
+
 static SENSOR_DEVICE_ATTR(fan1_max, S_IWUSR | S_IRUGO, show_fan_max,
 		    set_fan_max, 0);
 static SENSOR_DEVICE_ATTR(fan2_max, S_IWUSR | S_IRUGO, show_fan_max,
@@ -792,6 +842,15 @@ static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
 static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
 
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN1_ALARM));
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN2_ALARM));
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN3_ALARM));
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7470_FAN4_ALARM));
+
 static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO,
 		    show_force_pwm_max, set_force_pwm_max, 0);
 
@@ -856,8 +915,7 @@ static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO,
 
 static struct attribute *adt7470_attr[]  {
-	&sensor_dev_attr_alarms.dev_attr.attr,
-	&sensor_dev_attr_alarm_mask.dev_attr.attr,
+	&dev_attr_alarm_mask.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
 	&sensor_dev_attr_temp3_max.dev_attr.attr,
@@ -888,6 +946,16 @@ static struct attribute *adt7470_attr[]  	&sensor_dev_attr_temp8_input.dev_attr.attr,
 	&sensor_dev_attr_temp9_input.dev_attr.attr,
 	&sensor_dev_attr_temp10_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp4_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp5_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp6_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp7_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp8_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp9_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp10_alarm.dev_attr.attr,
 	&sensor_dev_attr_fan1_max.dev_attr.attr,
 	&sensor_dev_attr_fan2_max.dev_attr.attr,
 	&sensor_dev_attr_fan3_max.dev_attr.attr,
@@ -900,6 +968,10 @@ static struct attribute *adt7470_attr[]  	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan3_input.dev_attr.attr,
 	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
 	&sensor_dev_attr_force_pwm_max.dev_attr.attr,
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_pwm2.dev_attr.attr,
 

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Acked-by
#3 lore raw

Hi Darrick,

Quoted 11 lines · Darrick J. Wong
Quoted 3 lines · Jean Delvare

In general we keep the all-in-one alarms file for compatibility, but given that this driver is fairly new and libsensors never had specific support for it anyway, it's probably OK to drop it this time.

Thanks for the code review. I've made the changes you asked for and here's a new patch to supersede yesterday's.
---
Remove the old alarms hack and replace it with per-sensor alarm files.

Looks alright to me this time.

BTW, did you try your driver with lm-sensors 3.0.0?

Thanks,

Signature · 6 lines
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
#5 lore raw

Hi Darrick,

Le 20/12/2007, Darrick J. Wong écrit:

Quoted 4 lines · Jean Delvare
Quoted 1 line

BTW, did you try your driver with lm-sensors 3.0.0?

Yes I did, and it looked ok to me. Did you find something wrong?

No, I just wanted to make sure that you had tested it. Now that libsensors relies on drivers implementing the standard sysfs interface, it is a convenient way to verify that you implemented it properly.

--
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#6 lore raw
In reply to Darrick J. Wong

Hi Darrick:

Quoted 10 lines · Darrick J. Wong
Quoted 3 lines · Jean Delvare

In general we keep the all-in-one alarms file for compatibility, but given that this driver is fairly new and libsensors never had specific support for it anyway, it's probably OK to drop it this time.

Thanks for the code review. I've made the changes you asked for and here's a new patch to supersede yesterday's.
---
Remove the old alarms hack and replace it with per-sensor alarm files.

Quoted 5 lines

---

 drivers/hwmon/adt7470.c |   96 +++++++++++++++++++++++++++++++++++++++++------
 1 files changed, 84 insertions(+), 12 deletions(-)

Applied to hwmon-2.6.git/testing, thanks.

Signature · 8 lines
Mark M. Hoffman
[email protected]


_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors