Skip to contentSkip to conversation

4xx: Add 440SPe revA runtime detection to PCIe

PATCH In review Benjamin Herrenschmidt 1 participant 1 message Dec 21, 2007

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 21/21 4xx: Add 440SPe revA runtime detection to PCIe

From: Stefan Roese <[email protected]>

This patch adds runtime detection of the 440SPe revision A chips. These chips are equipped with a slighly different PCIe core and need special/ different initialization. The compatible node is changed to "plb-pciex-440spe" ("A" and "B" dropped). This is needed for boards that can be equipped with both PPC revisions like the AMCC Yucca.

---

 arch/powerpc/boot/dts/katmai.dts |    6 +++---
 arch/powerpc/sysdev/ppc4xx_pci.c |   25 +++++++++++++++++--------
 2 files changed, 20 insertions(+), 11 deletions(-)
arch/powerpc/boot/dts/katmai.dts +3 -3
@@ -267,7 +267,7 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
 			port = <0>; /* port number */
 			reg = <d 00000000 20000000	/* Config space access */
@@ -308,7 +308,7 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
 			port = <1>; /* port number */
 			reg = <d 20000000 20000000	/* Config space access */
@@ -349,7 +349,7 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
 			port = <2>; /* port number */
 			reg = <d 40000000 20000000	/* Config space access */
arch/powerpc/sysdev/ppc4xx_pci.c +17 -8
Index: linux-merge/arch/powerpc/sysdev/ppc4xx_pci.c
===================================================================
@@ -49,6 +49,15 @@ extern unsigned long total_memory;
 #define RES_TO_U32_HIGH(val)	(0)
 #endif
 
+static inline int ppc440spe_revA(void)
+{
+	/* Catch both 440SPe variants, with and without RAID6 support */
+        if ((mfspr(SPRN_PVR) & 0xffefffff) == 0x53421890)
+                return 1;
+        else
+                return 0;
+}
+
 static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
 {
 	struct pci_controller *hose;
@@ -516,8 +525,7 @@ static void __init ppc4xx_probe_pcix_bri
  *
  * We support 3 parts currently based on the compatible property:
  *
- * ibm,plb-pciex-440speA
- * ibm,plb-pciex-440speB
+ * ibm,plb-pciex-440spe
  * ibm,plb-pciex-405ex
  *
  * Anything else will be rejected for now as they are all subtly
@@ -688,7 +696,7 @@ static int ppc440spe_pciex_init_port_hw(
 
 	mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
 	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x20222222);
-	if (of_device_is_compatible(port->node, "ibm,plb-pciex-440speA"))
+	if (ppc440spe_revA())
 		mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x11000000);
 	mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL0SET1, 0x35000000);
 	mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL1SET1, 0x35000000);
@@ -767,7 +775,6 @@ static struct ppc4xx_pciex_hwops ppc440s
 	.setup_utl	= ppc440speB_pciex_init_utl,
 };
 
-
 #endif /* CONFIG_44x */
 
 #ifdef CONFIG_40x
@@ -881,10 +888,12 @@ static int __init ppc4xx_pciex_check_cor
 		return 0;
 
 #ifdef CONFIG_44x
-	if (of_device_is_compatible(np, "ibm,plb-pciex-440speA"))
-		ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops;
-	else if (of_device_is_compatible(np, "ibm,plb-pciex-440speB"))
-		ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+	if (of_device_is_compatible(np, "ibm,plb-pciex-440spe")) {
+		if (ppc440spe_revA())
+			ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops;
+		else
+			ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+	}
 #endif /* CONFIG_44x    */
 #ifdef CONFIG_40x
 	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))