ppc4xx: More cleanup for esd's LCD code
PATCH 1/1 ppc4xx: More cleanup for esd's LCD code
Signed-off-by Matthias Fuchs <[email protected]>
--- board/esd/common/lcd.c | 38 ++++++++++++++++++-------------------- 1 files changed, 18 insertions(+), 20 deletions(-)
board/esd/common/lcd.c +18 -20
@@ -37,41 +37,41 @@ int lcd_depth;unsigned char *glob_lcd_reg;unsigned char *glob_lcd_mem; -#ifdef CFG_LCD_ENDIAN +#if defined(CFG_LCD_ENDIAN )void lcd_setup (int lcd,int config) {if (lcd ==0 ) {/* * Set endianess and reset lcd controller 0 (small) */ -out32 (GPIO0_OR ,in32 (GPIO0_OR ) & ~CFG_LCD0_RST );/* set reset to low */ +out_be32 ((void *)GPIO0_OR ,in_be32 ((void *)GPIO0_OR ) & ~CFG_LCD0_RST );/* set reset to low */ udelay (10 );/* wait 10us */ if (config ==1 ) -out32 (GPIO0_OR ,in32 (GPIO0_OR ) |CFG_LCD_ENDIAN );/* big-endian */ +out_be32 ((void *)GPIO0_OR ,in_be32 ((void *)GPIO0_OR ) |CFG_LCD_ENDIAN );/* big-endian */ else -out32 (GPIO0_OR ,in32 (GPIO0_OR ) & ~CFG_LCD_ENDIAN );/* little-endian */ +out_be32 ((void *)GPIO0_OR ,in_be32 ((void *)GPIO0_OR ) & ~CFG_LCD_ENDIAN );/* little-endian */ udelay (10 );/* wait 10us */ -out32 (GPIO0_OR ,in32 (GPIO0_OR ) |CFG_LCD0_RST );/* set reset to high */ +out_be32 ((void *)GPIO0_OR ,in_be32 ((void *)GPIO0_OR ) |CFG_LCD0_RST );/* set reset to high */ }else {/* * Set endianess and reset lcd controller 1 (big) */ -out32 (GPIO0_OR ,in32 (GPIO0_OR ) & ~CFG_LCD1_RST );/* set reset to low */ +out_be32 ((void *)GPIO0_OR ,in_be32 ((void *)GPIO0_OR ) & ~CFG_LCD1_RST );/* set reset to low */ udelay (10 );/* wait 10us */ if (config ==1 ) -out32 (GPIO0_OR ,in32 (GPIO0_OR ) |CFG_LCD_ENDIAN );/* big-endian */ +out_be32 ((void *)GPIO0_OR ,in_be32 ((void *)GPIO0_OR ) |CFG_LCD_ENDIAN );/* big-endian */ else -out32 (GPIO0_OR ,in32 (GPIO0_OR ) & ~CFG_LCD_ENDIAN );/* little-endian */ +out_be32 ((void *)GPIO0_OR ,in_be32 ((void *)GPIO0_OR ) & ~CFG_LCD_ENDIAN );/* little-endian */ udelay (10 );/* wait 10us */ -out32 (GPIO0_OR ,in32 (GPIO0_OR ) |CFG_LCD1_RST );/* set reset to high */ +out_be32 ((void *)GPIO0_OR ,in_be32 ((void *)GPIO0_OR ) |CFG_LCD1_RST );/* set reset to high */ }/* * CFG_LCD_ENDIAN may also be FPGA_RESET, so set inactive */ -out32 (GPIO0_OR ,in32 (GPIO0_OR ) |CFG_LCD_ENDIAN );/* set reset high again */ +out_be32 ((void *)GPIO0_OR ,in_be32 ((void *)GPIO0_OR ) |CFG_LCD_ENDIAN );/* set reset high again */ } -#endif /* #ifdef CFG_LCD_ENDIAN */ +#endif /* CFG_LCD_ENDIAN */ void lcd_bmp (uchar *logo_bmp)
@@ -93,7 +93,6 @@ void lcd_bmp(uchar *logo_bmp)* Check for bmp mark 'BM' */ if (*(ushort *)logo_bmp !=0x424d ) { -/* * Decompress bmp image */
@@ -160,7 +159,7 @@ void lcd_bmp(uchar *logo_bmp)*/ if ((colors <=256 ) && (lcd_depth <=8 )) { ptr = (unsigned char *)(dst +14 +40 ); -for (i=0 ; i<colors; i++) { +for (i =0 ; i < colors; i++) { b = *ptr++; g = *ptr++; r = *ptr++;
@@ -175,11 +174,11 @@ void lcd_bmp(uchar *logo_bmp) ptr = glob_lcd_mem; ptr2 = (ushort *)glob_lcd_mem; header_size =14 +40 +4 *colors;/* skip bmp header */ -for (y=0 ; y<height; y++) { +for (y =0 ; y < height; y++) { bmp = &dst[(height-1 -y)*line_size + header_size];if (lcd_depth ==16 ) {if (bpp ==24 ) { -for (x=0 ; x<width; x++) { +for (x =0 ; x < width; x++) {/* * Generate epson 16bpp fb-format from 24bpp image */
@@ -190,7 +189,7 @@ void lcd_bmp(uchar *logo_bmp) *ptr2++ = val; } }else if (bpp ==8 ) { -for (x=0 ; x<line_size; x++) { +for (x =0 ; x < line_size; x++) {/* query rgb value from palette */ ptr = (unsigned char *)(dst +14 +40 ) ; ptr += (*bmp++) <<2 ;
@@ -202,9 +201,8 @@ void lcd_bmp(uchar *logo_bmp) } } }else { -for (x=0 ; x<line_size; x++) { +for (x =0 ; x < line_size; x++) *ptr++ = *bmp++; - } } }
@@ -254,7 +252,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count, palette_value =0x17 ; lcd_depth =8 ;puts ("LCD: S1D13704" ); - }else if (in_8 (&lcd_reg[0x10000 ]) ==0x24 ) { + }else if (in_8 (&lcd_reg[0x10000 ]) ==0x24 ) {/* * Small epson detected (705) */
@@ -296,7 +294,7 @@ void lcd_init(uchar *lcd_reg, uchar *lcd_mem, S1D_REGS *regs, int reg_count,lcd_bmp (logo_bmp); } -#ifdef CONFIG_VIDEO_SM501 +#if defined(CONFIG_VIDEO_SM501 )int do_esdbmp (cmd_tbl_t *cmdtp,int flag,int argc,char *argv[]) {ulong addr;
Signature · 1 line
1.5.3