hwmon: (w83627hf) Enable VBAT monitoring
PATCH 1/3 hwmon: (w83627hf) Enable VBAT monitoring
If VBAT monitoring is disabled, enable it. Bug reported on the lm-sensors trac system:
http://lm-sensors.org/ticket/2282
This is the exact same patch that was applied to the w83627ehf driver 6 months ago.
Signed-off-by Jean Delvare <[email protected]>
---
Carlos, could you please test and/or review this patch?
drivers/hwmon/w83627hf.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/hwmon/w83627hf.c +5 -0
@@ -1515,6 +1515,11 @@ static void __devinit w83627hf_init_devi (w83627hf_read_value (data,W83781D_REG_CONFIG ) &0xf7 ) | 0x01); + +/* Enable VBAT monitoring if needed */ + tmp =w83627hf_read_value (data,W83781D_REG_VBAT ); +if (!(tmp &0x01 )) +w83627hf_write_value (data,W83781D_REG_VBAT , tmp |0x01 ); }static void w83627hf_update_fan_div (struct w83627hf_data *data)
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors