make sysctl per namespace
Subsystems (3)
cover make sysctl per namespace
The following patchset makes the ipv6 sysctl to handle multiple network namespaces. Each instance of a network namespace as its own set of sysctl values, that means the behavior of the ipv6 stack can be different depending on the sysctl values setup in the different network namespaces.
Changelog:
V2 : make the mld_max_msf variable readonly when we are
not in the initial network namespace
V1 : initial post
PATCH 1/9 make ipv6_sysctl_register to return a value
This patch makes the function ipv6_sysctl_register to return a value. The af_inet6 init function is now able to handle an error and catch it from the initialization of the sysctl.
--- include/net/ipv6.h | 2 +- net/ipv6/af_inet6.c | 5 ++++- net/ipv6/sysctl_net_ipv6.c | 6 +++++- 3 files changed, 10 insertions(+), 3 deletions(-)
include/net/ipv6.h +1 -1
@@ -620,7 +620,7 @@ static inline int snmp6_unregister_dev(sextern ctl_table ipv6_route_table[];extern ctl_table ipv6_icmp_table[]; -extern void ipv6_sysctl_register (void ); +extern int ipv6_sysctl_register (void );extern void ipv6_sysctl_unregister (void );#endif
net/ipv6/af_inet6.c +4 -1
@@ -783,7 +783,9 @@ static int __init inet6_init(void)*/ #ifdef CONFIG_SYSCTL -ipv6_sysctl_register (); + err =ipv6_sysctl_register (); +if (err) + goto sysctl_fail;#endif err =icmpv6_init (&inet6_family_ops);if (err)
@@ -897,6 +899,7 @@ ndisc_fail: icmp_fail: #ifdef CONFIG_SYSCTLipv6_sysctl_unregister (); +sysctl_fail: #endifcleanup_ipv6_mibs (); out_unregister_sock:
net/ipv6/sysctl_net_ipv6.c +5 -1
@@ -90,9 +90,13 @@ static struct ctl_path ipv6_ctl_path[] =static struct ctl_table_header *ipv6_sysctl_header; -void ipv6_sysctl_register (void ) +int ipv6_sysctl_register (void ) { ipv6_sysctl_header =register_sysctl_paths (ipv6_ctl_path, ipv6_table); +if (!ipv6_sysctl_header) +return -ENOMEM ; + +return 0 ; }void ipv6_sysctl_unregister (void )
PATCH 2/9 make the ipv6 sysctl to be a netns subsystem
In reply to Daniel LezcanoThe initialization of the sysctl for the ipv6 protocol is changed to a network namespace subsystem. That means when a new network namespace is created the initialization function for the sysctl will be called.
That do not change the behavior of the sysctl in case of the kernel with the network namespace disabled.
--- net/ipv6/sysctl_net_ipv6.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
net/ipv6/sysctl_net_ipv6.c +18 -3
@@ -90,16 +90,31 @@ static struct ctl_path ipv6_ctl_path[] =static struct ctl_table_header *ipv6_sysctl_header; -int ipv6_sysctl_register (void ) +static int ipv6_sysctl_net_init (struct net *net) { - ipv6_sysctl_header =register_sysctl_paths (ipv6_ctl_path, ipv6_table); + ipv6_sysctl_header =register_net_sysctl_table (net, ipv6_ctl_path, ipv6_table);if (!ipv6_sysctl_header)return -ENOMEM ;return 0 ; } +static void ipv6_sysctl_net_exit (struct net *net) +{ +unregister_net_sysctl_table (ipv6_sysctl_header); +} + +static struct pernet_operations ipv6_sysctl_net_ops = { + .init = ipv6_sysctl_net_init, + .exit = ipv6_sysctl_net_exit, +}; + +int ipv6_sysctl_register (void ) +{ +return register_pernet_subsys (&ipv6_sysctl_net_ops); +} +void ipv6_sysctl_unregister (void ) { -unregister_sysctl_table (ipv6_sysctl_header); +unregister_pernet_subsys (&ipv6_sysctl_net_ops); }
PATCH 3/9 make ipv6 structure for netns
In reply to Daniel LezcanoLike the ipv4 part, this patch adds an ipv6 structure in the net structure to aggregate the different resources to make ipv6 per namespace.
--- include/net/net_namespace.h | 2 ++ include/net/netns/ipv6.h | 10 ++++++++++ 2 files changed, 12 insertions(+)
include/net/net_namespace.h +2 -0
@@ -11,6 +11,7 @@#include <net/netns/unix.h> #include <net/netns/packet.h> #include <net/netns/ipv4.h> +#include <net/netns/ipv6.h> struct proc_dir_entry ;struct net_device ;
@@ -48,6 +49,7 @@ struct net {struct netns_packet packet;struct netns_unix unx;struct netns_ipv4 ipv4; +struct netns_ipv6 ipv6; };#ifdef CONFIG_NET
include/net/netns/ipv6.h new file +10 -0
@@ -0,0 +1,10 @@ +/* +* ipv6 in net namespaces +*/ + +#ifndef __NETNS_IPV6_H__ +#define __NETNS_IPV6_H__ + +struct netns_ipv6 { +}; +#endif
PATCH 4/9 make multiple instance of sysctl tables
In reply to Daniel LezcanoEach network namespace wants its own set of sysctl value, eg. we should not be able from a namespace to set a sysctl value for another namespace , especially for the initial network namespace.
This patch duplicates the sysctl table when we register a new network namespace for ipv6. The duplicated table are postfixed with the "template" word to notify the developper the table is cloned.
--- include/net/ipv6.h | 4 +- include/net/netns/ipv6.h | 9 ++++++ net/ipv6/icmp.c | 12 +++++++- net/ipv6/route.c | 11 ++++++- net/ipv6/sysctl_net_ipv6.c | 67 +++++++++++++++++++++++++++++++++++++-------- 5 files changed, 88 insertions(+), 15 deletions(-)
net/ipv6/sysctl_net_ipv6.c +56 -11
@@ -14,20 +14,23 @@#include <net/addrconf.h> #include <net/inet_frag.h> -static ctl_table ipv6_table[] = { +extern struct ctl_table *ipv6_route_sysctl_init (struct net *net); +extern struct ctl_table *ipv6_icmp_sysctl_init (struct net *net); + +static ctl_table ipv6_table_template[] = { { .ctl_name =NET_IPV6_ROUTE , .procname ="route" , .maxlen =0 , .mode =0555 , - .child = ipv6_route_table + .child = ipv6_route_table_template }, { .ctl_name =NET_IPV6_ICMP , .procname ="icmp" , .maxlen =0 , .mode =0555 , - .child = ipv6_icmp_table + .child = ipv6_icmp_table_template }, { .ctl_name =NET_IPV6_BINDV6ONLY ,
@@ -88,20 +91,62 @@ static struct ctl_path ipv6_ctl_path[] = { }, }; -static struct ctl_table_header *ipv6_sysctl_header; -static int ipv6_sysctl_net_init (struct net *net) { - ipv6_sysctl_header =register_net_sysctl_table (net, ipv6_ctl_path, ipv6_table); -if (!ipv6_sysctl_header) -return -ENOMEM ; - -return 0 ; +struct ctl_table *ipv6_table; +struct ctl_table *ipv6_route_table; +struct ctl_table *ipv6_icmp_table; +int err; + + err = -ENOMEM ; + ipv6_table =kmemdup (ipv6_table_template,sizeof (ipv6_table_template), +GFP_KERNEL ); +if (!ipv6_table) + goto out; + + ipv6_route_table =ipv6_route_sysctl_init (net); +if (!ipv6_route_table) + goto out_ipv6_table; + + ipv6_icmp_table =ipv6_icmp_sysctl_init (net); +if (!ipv6_icmp_table) + goto out_ipv6_route_table; + + ipv6_table[0 ].child = ipv6_route_table; + ipv6_table[1 ].child = ipv6_icmp_table; + + net->ipv6.sysctl.table =register_net_sysctl_table (net, ipv6_ctl_path, ipv6_table); +if (!net->ipv6.sysctl.table) + goto out_ipv6_icmp_table; + + err =0 ; +out: +return err; + +out_ipv6_icmp_table: +kfree (ipv6_icmp_table); +out_ipv6_route_table: +kfree (ipv6_route_table); +out_ipv6_table: +kfree (ipv6_table); + goto out; }static void ipv6_sysctl_net_exit (struct net *net) { -unregister_net_sysctl_table (ipv6_sysctl_header); +struct ctl_table *ipv6_table; +struct ctl_table *ipv6_route_table; +struct ctl_table *ipv6_icmp_table; + + ipv6_table = net->ipv6.sysctl.table->ctl_table_arg; + ipv6_route_table = ipv6_table[0 ].child; + ipv6_icmp_table = ipv6_table[1 ].child; + +unregister_net_sysctl_table (net->ipv6.sysctl.table); + +kfree (ipv6_table); +kfree (ipv6_route_table); +kfree (ipv6_icmp_table); }static struct pernet_operations ipv6_sysctl_net_ops = {
include/net/netns/ipv6.h +9 -0
@@ -5,6 +5,15 @@#ifndef __NETNS_IPV6_H__#define __NETNS_IPV6_H__ +struct ctl_table_header ; + +struct netns_sysctl_ipv6 { +struct ctl_table_header *table; +}; +struct netns_ipv6 { +#ifdef CONFIG_SYSCTL +struct netns_sysctl_ipv6 sysctl; +#endif };#endif
include/net/ipv6.h +2 -2
@@ -617,8 +617,8 @@ static inline int snmp6_unregister_dev(s#endif #ifdef CONFIG_SYSCTL -extern ctl_table ipv6_route_table[]; -extern ctl_table ipv6_icmp_table[]; +extern ctl_table ipv6_route_table_template[]; +extern ctl_table ipv6_icmp_table_template[];extern int ipv6_sysctl_register (void );extern void ipv6_sysctl_unregister (void );
net/ipv6/icmp.c +11 -1
@@ -909,7 +909,7 @@ int icmpv6_err_convert(int type, int codEXPORT_SYMBOL (icmpv6_err_convert); #ifdef CONFIG_SYSCTL -ctl_table ipv6_icmp_table[] = { +ctl_table ipv6_icmp_table_template[] = { { .ctl_name = NET_IPV6_ICMP_RATELIMIT, .procname = "ratelimit",
@@ -920,5 +920,15 @@ ctl_table ipv6_icmp_table[] = { }, { .ctl_name = 0 }, }; + +struct ctl_table *ipv6_icmp_sysctl_init (struct net *net) +{ +struct ctl_table *table; + + table =kmemdup (ipv6_icmp_table_template, +sizeof (ipv6_icmp_table_template), +GFP_KERNEL ); +return table; +}#endif
net/ipv6/route.c +10 -1
@@ -2404,7 +2404,7 @@ int ipv6_sysctl_rtcache_flush(ctl_tablereturn -EINVAL ; } -ctl_table ipv6_route_table[] = { +ctl_table ipv6_route_table_template[] = { { .procname ="flush" , .data = &flush_delay,
@@ -2494,6 +2494,15 @@ ctl_table ipv6_route_table[] = { { .ctl_name = 0 } }; +struct ctl_table *ipv6_route_sysctl_init (struct net *net) +{ +struct ctl_table *table; + + table =kmemdup (ipv6_route_table_template, +sizeof (ipv6_route_table_template), +GFP_KERNEL ); +return table; +}#endif int __init ip6_route_init (void )
PATCH 5/9 make bindv6only sysctl per namespace
In reply to Daniel LezcanoThis patch moves the bindv6only sysctl to the network namespace structure. Until the ipv6 protocol is not per namespace, the sysctl variable is always from the initial network namespace.
--- include/net/ipv6.h | 1 - include/net/netns/ipv6.h | 1 + net/ipv6/af_inet6.c | 4 +--- net/ipv6/sysctl_net_ipv6.c | 6 +++++- 4 files changed, 7 insertions(+), 5 deletions(-)
include/net/ipv6.h +0 -1
@@ -109,7 +109,6 @@ struct frag_hdr {#include <net/sock.h> /* sysctls */ -extern int sysctl_ipv6_bindv6only;extern int sysctl_mld_max_msf;#define _DEVINC (statname, modifier, idev, field) \
include/net/netns/ipv6.h +1 -0
@@ -9,6 +9,7 @@ struct ctl_table_header;struct netns_sysctl_ipv6 {struct ctl_table_header *table; +int bindv6only; };struct netns_ipv6 {
net/ipv6/af_inet6.c +1 -3
@@ -66,8 +66,6 @@ MODULE_AUTHOR("Cast of dozens");MODULE_DESCRIPTION ("IPv6 protocol stack for Linux" );MODULE_LICENSE ("GPL" ); -int sysctl_ipv6_bindv6only__read_mostly ; -/* The inetsw6 table contains everything that inet6_create needs to * build a new socket. */
@@ -193,7 +191,7 @@ lookup_protocol: np->mcast_hops =-1 ; np->mc_loop =1 ; np->pmtudisc =IPV6_PMTUDISC_WANT ; - np->ipv6only = sysctl_ipv6_bindv6only; + np->ipv6only = init_net.ipv6.sysctl.bindv6only;/* Init the ipv4 part of the socket since we can have sockets * using v6 API for ipv4.
net/ipv6/sysctl_net_ipv6.c +5 -1
@@ -35,7 +35,7 @@ static ctl_table ipv6_table_template[] = { .ctl_name = NET_IPV6_BINDV6ONLY, .procname = "bindv6only", - .data = &sysctl_ipv6_bindv6only, + .data = &init_net.ipv6.sysctl.bindv6only, .maxlen = sizeof(int), .mode =0644 , .proc_handler = &proc_dointvec
@@ -115,6 +115,10 @@ static int ipv6_sysctl_net_init(struct n ipv6_table[0 ].child = ipv6_route_table; ipv6_table[1 ].child = ipv6_icmp_table; + ipv6_table[2 ].data = &net->ipv6.sysctl.bindv6only; + + net->ipv6.sysctl.bindv6only =0 ; + net->ipv6.sysctl.table =register_net_sysctl_table (net, ipv6_ctl_path, ipv6_table);if (!net->ipv6.sysctl.table) goto out_ipv6_icmp_table;
Re: [patch 5/9][NETNS][IPV6] make bindv6only sysctl per namespace
Daniel,
The kernel fails to build with this patch applied when CONFIG_SYSCTL=n See comment below.
Quoted 50 lines · Daniel Lezcano
This patch moves the bindv6only sysctl to the network namespace structure. Until the ipv6 protocol is not per namespace, the sysctl variable is always from the initial network namespace.
Signed-off-by Daniel Lezcano <[email protected]>--- include/net/ipv6.h | 1 - include/net/netns/ipv6.h | 1 + net/ipv6/af_inet6.c | 4 +--- net/ipv6/sysctl_net_ipv6.c | 6 +++++- 4 files changed, 7 insertions(+), 5 deletions(-)Index:
net-2.6.25/include/net/ipv6.h
===================================================================include/net/ipv6.h +0
-1@@ -109,7 +109,6 @@ struct frag_hdr {#include <net/sock.h> /* sysctls */ -extern int sysctl_ipv6_bindv6only;extern int sysctl_mld_max_msf;#define _DEVINC (statname, modifier, idev, field) \Index:
net-2.6.25/include/net/netns/ipv6.h
===================================================================include/net/netns/ipv6.h +1
-0@@ -9,6 +9,7 @@ struct ctl_table_header;struct netns_sysctl_ipv6 {struct ctl_table_header *table; +int bindv6only; };struct netns_ipv6 {Index:
net-2.6.25/net/ipv6/af_inet6.c
===================================================================net/ipv6/af_inet6.c +0
-2@@ -66,8 +66,6 @@ MODULE_AUTHOR("Cast of dozens");MODULE_DESCRIPTION ("IPv6 protocol stack for Linux" );MODULE_LICENSE ("GPL" ); -int sysctl_ipv6_bindv6only__read_mostly ; -/* The inetsw6 table contains everything that inet6_create needs to * build a new socket. */
net/ipv6/af_inet6.c lookup_protocol: · line 194
Quoted 5 lines
net/ipv6/af_inet6.c +1
-1@@ -193,7 +191,7 @@ lookup_protocol: np->mcast_hops =-1 ; np->mc_loop =1 ; np->pmtudisc =IPV6_PMTUDISC_WANT ; - np->ipv6only = sysctl_ipv6_bindv6only; + np->ipv6only = init_net.ipv6.sysctl.bindv6only;
The problem is here:
init_net.ipv6.sysctl is not defined if CONFIG_SYSCTL=n.
Benjamin
Quoted 29 lines
net/ipv6/af_inet6.c +0
-0/* Init the ipv4 part of the socket since we can have sockets * using v6 API for ipv4. Index:
net-2.6.25/net/ipv6/sysctl_net_ipv6.c
===================================================================net/ipv6/sysctl_net_ipv6.c +5
-2@@ -35,7 +35,7 @@ static ctl_table ipv6_table_template[] = { .ctl_name = NET_IPV6_BINDV6ONLY, .procname = "bindv6only", - .data = &sysctl_ipv6_bindv6only, + .data = &init_net.ipv6.sysctl.bindv6only, .maxlen = sizeof(int), .mode =0644 , .proc_handler = &proc_dointvec@@ -115,6 +115,10 @@ static int ipv6_sysctl_net_init(struct n ipv6_table[0 ].child = ipv6_route_table; ipv6_table[1 ].child = ipv6_icmp_table; + ipv6_table[2 ].data = &net->ipv6.sysctl.bindv6only; + + net->ipv6.sysctl.bindv6only =0 ; + net->ipv6.sysctl.table =register_net_sysctl_table (net, ipv6_ctl_path, ipv6_table);if (!net->ipv6.sysctl.table) goto out_ipv6_icmp_table; -- -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
B e n j a m i n T h e r y - BULL/DT/Open Software R&D http://www.bull.com
Re: [patch 5/9][NETNS][IPV6] make bindv6only sysctl per namespace
Quoted 9 lines · Benjamin Thery
Daniel,
The kernel fails to build with this patch applied when
CONFIG_SYSCTL=nSee comment below.Quoted 3 lines · Daniel Lezcano
This patch moves the bindv6only sysctl to the network namespace structure. Until the ipv6 protocol is not per namespace, the sysctl variable is always from the initial network namespace.
Argh !
Thanks Benjamin to catch this.
I think I have to apologize to Eric, I thought I tested with this option off but it wasn't and Eric was right. I will wait a little for feedbacks and send a V3.
Re: [patch 5/9][NETNS][IPV6] make bindv6only sysctl per namespace
Quoted 11 lines · On Mon, 07 Jan 2008 17:36:35 +0100 Daniel Lezcano <[email protected]> wrote:
Quoted 9 lines · Benjamin Thery
Daniel,
The kernel fails to build with this patch applied when
CONFIG_SYSCTL=nSee comment below.Quoted 3 lines · Daniel Lezcano
This patch moves the bindv6only sysctl to the network namespace structure. Until the ipv6 protocol is not per namespace, the sysctl variable is always from the initial network namespace.
Quoted 7 lines
Argh !
Thanks Benjamin to catch this.
I think I have to apologize to Eric, I thought I tested with this option off but it wasn't and Eric was right. I will wait a little for feedbacks and send a V3.
No problem Daniel :)
David Miller
maintainerRe: [patch 5/9][NETNS][IPV6] make bindv6only sysctl per namespace
In reply to Daniel LezcanoFrom: Daniel Lezcano <[email protected]>
Date: Mon, 07 Jan 2008 17:36:35 +0100
Quoted 5 lines
Thanks Benjamin to catch this.
I think I have to apologize to Eric, I thought I tested with this option off but it wasn't and Eric was right. I will wait a little for feedbacks and send a V3.
I would have preferred if you just reposted a fixed version of patch 5 instead of waiting for the feedback that realistically isn't going to come at all after this much time has passed.
I was about to apply this series, then looked through my mailbox for reported regressions and hit this.
That makes me not start applying your patch series. I want the whole thing with known bug fixes available by the time I get around to reviewing it.
Thanks.
PATCH 6/9 make ip6_frags per namespace
In reply to Daniel LezcanoThe ip6_frags is moved to the network namespace structure. Because there can be multiple instances of the network namespaces, and the ip6_frags is no longer a global static variable, a helper function has been added to facilitate the initialization of the variables.
Until the ipv6 protocol is not per namespace, the variables are accessed relatively from the initial network namespace.
--- include/net/ipv6.h | 3 --- include/net/netns/ipv6.h | 3 +++ net/ipv6/reassembly.c | 21 ++++++++++++--------- net/ipv6/sysctl_net_ipv6.c | 15 +++++++++++---- 4 files changed, 26 insertions(+), 16 deletions(-)
include/net/ipv6.h +0 -3
@@ -570,9 +570,6 @@ extern int inet6_hash_connect(struct ine/* * reassembly.c */ -struct inet_frags_ctl ; -extern struct inet_frags_ctl ip6_frags_ctl; -extern const struct proto_ops inet6_stream_ops;extern const struct proto_ops inet6_dgram_ops;
include/net/netns/ipv6.h +3 -0
@@ -2,6 +2,8 @@* ipv6 in net namespaces */ +#include <net/inet_frag.h> +#ifndef __NETNS_IPV6_H__#define __NETNS_IPV6_H__
@@ -9,6 +11,7 @@ struct ctl_table_header;struct netns_sysctl_ipv6 {struct ctl_table_header *table; +struct inet_frags_ctl frags;int bindv6only; };
net/ipv6/reassembly.c +12 -9
@@ -82,13 +82,6 @@ struct frag_queue__u16 nhoffset; }; -struct inet_frags_ctl ip6_frags_ctl__read_mostly = { - .high_thresh =256 *1024 , - .low_thresh =192 *1024 , - .timeout =IPV6_FRAG_TIMEOUT , - .secret_interval =10 *60 *HZ , -}; -static struct inet_frags ip6_frags;int ip6_frag_nqueues (void )
@@ -605,7 +598,7 @@ static int ipv6_frag_rcv(struct sk_buffreturn 1 ; } -if (atomic_read (&ip6_frags.mem) > ip6_frags_ctl.high_thresh) +if (atomic_read (&ip6_frags.mem) > init_net.ipv6.sysctl.frags.high_thresh)ip6_evictor (ip6_dst_idev (skb->dst)); if ((fq = fq_find(fhdr->identification, &hdr->saddr, &hdr->daddr,
@@ -632,6 +625,16 @@ static struct inet6_protocol frag_protoc .flags = INET6_PROTO_NOPOLICY, }; +void ipv6_frag_sysctl_init (struct net *net) +{ + net->ipv6.sysctl.frags.high_thresh =256 *1024 , + net->ipv6.sysctl.frags.low_thresh =192 *1024 , + net->ipv6.sysctl.frags.timeout =IPV6_FRAG_TIMEOUT , + net->ipv6.sysctl.frags.secret_interval =10 *60 *HZ , + + ip6_frags.ctl = &net->ipv6.sysctl.frags; +} +int __init ipv6_frag_init (void ) {int ret;
@@ -639,7 +642,7 @@ int __init ipv6_frag_init(void) ret =inet6_add_protocol (&frag_protocol,IPPROTO_FRAGMENT );if (ret) goto out; - ip6_frags.ctl = &ip6_frags_ctl; + ip6_frags.hashfn = ip6_hashfn; ip6_frags.constructor = ip6_frag_init; ip6_frags.destructor =NULL ;
net/ipv6/sysctl_net_ipv6.c +11 -4
@@ -16,6 +16,7 @@extern struct ctl_table *ipv6_route_sysctl_init (struct net *net);extern struct ctl_table *ipv6_icmp_sysctl_init (struct net *net); +extern void ipv6_frag_sysctl_init (struct net *net);static ctl_table ipv6_table_template[] = { {
@@ -43,7 +44,7 @@ static ctl_table ipv6_table_template[] = { .ctl_name = NET_IPV6_IP6FRAG_HIGH_THRESH, .procname = "ip6frag_high_thresh", - .data = &ip6_frags_ctl.high_thresh, + .data = &init_net.ipv6.sysctl.frags.high_thresh, .maxlen = sizeof(int), .mode =0644 , .proc_handler = &proc_dointvec
@@ -51,7 +52,7 @@ static ctl_table ipv6_table_template[] = { .ctl_name = NET_IPV6_IP6FRAG_LOW_THRESH, .procname = "ip6frag_low_thresh", - .data = &ip6_frags_ctl.low_thresh, + .data = &init_net.ipv6.sysctl.frags.low_thresh, .maxlen = sizeof(int), .mode =0644 , .proc_handler = &proc_dointvec
@@ -59,7 +60,7 @@ static ctl_table ipv6_table_template[] = { .ctl_name = NET_IPV6_IP6FRAG_TIME, .procname = "ip6frag_time", - .data = &ip6_frags_ctl.timeout, + .data = &init_net.ipv6.sysctl.frags.timeout, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &proc_dointvec_jiffies,
@@ -68,7 +69,7 @@ static ctl_table ipv6_table_template[] = { .ctl_name = NET_IPV6_IP6FRAG_SECRET_INTERVAL, .procname = "ip6frag_secret_interval", - .data = &ip6_frags_ctl.secret_interval, + .data = &init_net.ipv6.sysctl.frags.secret_interval, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &proc_dointvec_jiffies,
@@ -116,6 +117,12 @@ static int ipv6_sysctl_net_init(struct n ipv6_table[1 ].child = ipv6_icmp_table; ipv6_table[2 ].data = &net->ipv6.sysctl.bindv6only; + ipv6_table[3 ].data = &net->ipv6.sysctl.frags.high_thresh; + ipv6_table[4 ].data = &net->ipv6.sysctl.frags.low_thresh; + ipv6_table[5 ].data = &net->ipv6.sysctl.frags.timeout; + ipv6_table[6 ].data = &net->ipv6.sysctl.frags.secret_interval; + +ipv6_frag_sysctl_init (net); net->ipv6.sysctl.bindv6only =0 ;
PATCH 7/9 make mld_max_msf readonly in other namespaces
In reply to Daniel LezcanoThe mld_max_msf protects the system with a maximum allowed multicast source filters. Making this variable per namespace can be potentially an problem if someone inside a namespace set it to a big value, that will impact the whole system including other namespaces.
I don't see any benefits to have it per namespace for now, so in order to keep a directory entry in a newly created namespace, I make it read-only when we are not in the initial network namespace.
--- net/ipv6/sysctl_net_ipv6.c | 3 +++ 1 file changed, 3 insertions(+)
net/ipv6/sysctl_net_ipv6.c +3 -0
@@ -122,6 +122,9 @@ static int ipv6_sysctl_net_init(struct n ipv6_table[5 ].data = &net->ipv6.sysctl.frags.timeout; ipv6_table[6 ].data = &net->ipv6.sysctl.frags.secret_interval; +if (net != &init_net) + ipv6_table[7 ].mode =0444 ; +ipv6_frag_sysctl_init (net); net->ipv6.sysctl.bindv6only =0 ;
PATCH 8/9 make sysctls route per namespace
In reply to Daniel LezcanoAll the sysctl concerning the routes are moved to the network namespace structure. A helper function is called to initialize the variables.
Because the ipv6 protocol is not yet per namespace, the variables are accessed relatively from the network namespace.
--- include/net/ip6_route.h | 2 - include/net/netns/ipv6.h | 8 ++++++ net/ipv6/ip6_fib.c | 14 ++++++---- net/ipv6/route.c | 58 ++++++++++++++++++++++----------------------- net/ipv6/sysctl_net_ipv6.c | 9 ++++++ 5 files changed, 55 insertions(+), 36 deletions(-)
include/net/netns/ipv6.h +8 -0
@@ -13,6 +13,14 @@ struct netns_sysctl_ipv6 {struct ctl_table_header *table;struct inet_frags_ctl frags;int bindv6only; +int flush_delay; +int ip6_rt_max_size; +int ip6_rt_gc_min_interval; +int ip6_rt_gc_timeout; +int ip6_rt_gc_interval; +int ip6_rt_gc_elasticity; +int ip6_rt_mtu_expires; +int ip6_rt_min_advmss; };struct netns_ipv6 {
net/ipv6/route.c +29 -29
168 lines not on this page · raw message
net/ipv6/sysctl_net_ipv6.c +9 -0
@@ -113,7 +113,16 @@ static int ipv6_sysctl_net_init(struct nif (!ipv6_icmp_table) goto out_ipv6_route_table; + ipv6_route_table[0 ].data = &net->ipv6.sysctl.flush_delay; + ipv6_route_table[2 ].data = &net->ipv6.sysctl.ip6_rt_max_size; + ipv6_route_table[3 ].data = &net->ipv6.sysctl.ip6_rt_gc_min_interval; + ipv6_route_table[4 ].data = &net->ipv6.sysctl.ip6_rt_gc_timeout; + ipv6_route_table[5 ].data = &net->ipv6.sysctl.ip6_rt_gc_interval; + ipv6_route_table[6 ].data = &net->ipv6.sysctl.ip6_rt_gc_elasticity; + ipv6_route_table[7 ].data = &net->ipv6.sysctl.ip6_rt_mtu_expires; + ipv6_route_table[8 ].data = &net->ipv6.sysctl.ip6_rt_min_advmss; ipv6_table[0 ].child = ipv6_route_table; + ipv6_table[1 ].child = ipv6_icmp_table; ipv6_table[2 ].data = &net->ipv6.sysctl.bindv6only;
include/net/ip6_route.h +0 -2
@@ -43,8 +43,6 @@ extern struct rt6_info ip6_prohibit_entrextern struct rt6_info ip6_blk_hole_entry;#endif -extern int ip6_rt_gc_interval; -extern void ip6_route_input (struct sk_buff *skb); extern struct dst_entry * ip6_route_output(struct sock *sk,
net/ipv6/ip6_fib.c +9 -5
@@ -681,13 +681,15 @@ static __inline__ void fib6_start_gc(str {if (ip6_fib_timer.expires ==0 && (rt->rt6i_flags & (RTF_EXPIRES |RTF_CACHE ))) -mod_timer (&ip6_fib_timer, jiffies + ip6_rt_gc_interval); +mod_timer (&ip6_fib_timer, jiffies + + init_net.ipv6.sysctl.ip6_rt_gc_interval); }void fib6_force_start_gc (void ) {if (ip6_fib_timer.expires ==0 ) -mod_timer (&ip6_fib_timer, jiffies + ip6_rt_gc_interval); +mod_timer (&ip6_fib_timer, jiffies + + init_net.ipv6.sysctl.ip6_rt_gc_interval); }/*
@@ -1447,7 +1449,8 @@ void fib6_run_gc(unsigned long dummy) {if (dummy != ~0UL ) {spin_lock_bh (&fib6_gc_lock); - gc_args.timeout = dummy ? (int )dummy : ip6_rt_gc_interval; + gc_args.timeout = dummy ? (int )dummy : + init_net.ipv6.sysctl.ip6_rt_gc_interval; }else {local_bh_disable ();if (!spin_trylock (&fib6_gc_lock)) {
@@ -1455,7 +1458,7 @@ void fib6_run_gc(unsigned long dummy)local_bh_enable ();return ; } - gc_args.timeout = ip6_rt_gc_interval; + gc_args.timeout = init_net.ipv6.sysctl.ip6_rt_gc_interval; } gc_args.more =0 ;
@@ -1463,7 +1466,8 @@ void fib6_run_gc(unsigned long dummy)fib6_clean_all (fib6_age,0 ,NULL );if (gc_args.more) -mod_timer (&ip6_fib_timer, jiffies + ip6_rt_gc_interval); +mod_timer (&ip6_fib_timer, jiffies + + init_net.ipv6.sysctl.ip6_rt_gc_interval);else {del_timer (&ip6_fib_timer); ip6_fib_timer.expires =0 ;
PATCH 9/9 make icmpv6_time sysctl per namespace
In reply to Daniel LezcanoThis patch moves the icmpv6_time sysctl to the network namespace structure. A small initialization helper function has been added.
Because the ipv6 protocol is not yet per namespace, the variable is accessed relatively to the initial network namespace.
--- include/net/netns/ipv6.h | 1 + net/ipv6/icmp.c | 8 ++++---- net/ipv6/sysctl_net_ipv6.c | 1 + 3 files changed, 6 insertions(+), 4 deletions(-)
include/net/netns/ipv6.h +1 -0
@@ -21,6 +21,7 @@ struct netns_sysctl_ipv6 {int ip6_rt_gc_elasticity;int ip6_rt_mtu_expires;int ip6_rt_min_advmss; +int icmpv6_time; };struct netns_ipv6 {
net/ipv6/icmp.c +4 -4
@@ -154,8 +154,6 @@ static int is_ineligible(struct sk_buffreturn 0 ; } -static int sysctl_icmpv6_time__read_mostly =1 *HZ ; -/* * Check the ICMP output rate limit */
@@ -186,7 +184,7 @@ static inline int icmpv6_xrlim_allow(str res =1 ; }else {struct rt6_info *rt = (struct rt6_info *)dst; -int tmo = sysctl_icmpv6_time; +int tmo = init_net.ipv6.sysctl.icmpv6_time;/* Give more bandwidth to wider prefixes. */ if (rt->rt6i_dst.plen <128 )
@@ -913,7 +911,7 @@ ctl_table ipv6_icmp_table_template[] = { { .ctl_name = NET_IPV6_ICMP_RATELIMIT, .procname = "ratelimit", - .data = &sysctl_icmpv6_time, + .data = &init_net.ipv6.sysctl.icmpv6_time, .maxlen = sizeof(int), .mode =0644 , .proc_handler = &proc_dointvec
@@ -925,6 +923,8 @@ struct ctl_table *ipv6_icmp_sysctl_init( {struct ctl_table *table; + net->ipv6.sysctl.icmpv6_time =1 *HZ ; + table =kmemdup (ipv6_icmp_table_template,sizeof (ipv6_icmp_table_template),GFP_KERNEL );
net/ipv6/sysctl_net_ipv6.c +1 -0
@@ -123,6 +123,7 @@ static int ipv6_sysctl_net_init(struct n ipv6_route_table[8 ].data = &net->ipv6.sysctl.ip6_rt_min_advmss; ipv6_table[0 ].child = ipv6_route_table; + ipv6_icmp_table[0 ].data = &net->ipv6.sysctl.icmpv6_time; ipv6_table[1 ].child = ipv6_icmp_table; ipv6_table[2 ].data = &net->ipv6.sysctl.bindv6only;