Skip to contentSkip to conversation

2.6.24-rc5: 'sysctl table check failed' when turning on printer

BUG Frans Pop 1 participant 1 message Jan 6, 2008

lore
Share & tools
lore

Frans Pop

author
#0 lore raw

(Resending as there were no replies on my first post mid December; issue is still there with -rc6.)

This is the first time I've seen this error. Last time I used the printer was with 2.6.24-rc3 and that time this error did not occur. The error occurs when I start a print job, not when I turn the printer on.

System is Pentium D x86_64 kernel running Debian unstable. Printer is a HP Photosmart P1100 connected via parallel port.

Not sure who should be CCed on this.

ppdev0: registered pardevice
sysctl table check failed: /dev/parport/parport0/devices/ppdev0/timeslice Sysctl already exists
Pid: 14491, comm: hpijs Not tainted 2.6.24-rc5 #1

Call Trace:
 [<ffffffff8024c0b0>] set_fail+0x3f/0x47
 [<ffffffff8024c566>] sysctl_check_table+0x4ae/0x4fb
 [<ffffffff8024c062>] sysctl_check_lookup+0xc1/0xd0
 [<ffffffff8024c57c>] sysctl_check_table+0x4c4/0x4fb
 [<ffffffff8024c062>] sysctl_check_lookup+0xc1/0xd0
 [<ffffffff8024c57c>] sysctl_check_table+0x4c4/0x4fb
 [<ffffffff8024c062>] sysctl_check_lookup+0xc1/0xd0
 [<ffffffff8024c57c>] sysctl_check_table+0x4c4/0x4fb
 [<ffffffff8024c062>] sysctl_check_lookup+0xc1/0xd0
 [<ffffffff8024c57c>] sysctl_check_table+0x4c4/0x4fb
 [<ffffffff8024c062>] sysctl_check_lookup+0xc1/0xd0
 [<ffffffff8024c57c>] sysctl_check_table+0x4c4/0x4fb
 [<ffffffff8023ca15>] register_sysctl_table+0x52/0x9d
 [<ffffffff881d97cb>] :parport:parport_device_proc_register+0xc3/0xe3
 [<ffffffff881d7da7>] :parport:parport_register_device+0x206/0x267
 [<ffffffff884171ae>] :ppdev:pp_irq+0x0/0x40
 [<ffffffff8841774f>] :ppdev:pp_ioctl+0x13f/0x77c
 [<ffffffff80296a11>] do_ioctl+0x55/0x6b
 [<ffffffff80296c6a>] vfs_ioctl+0x243/0x25c
 [<ffffffff80296cd4>] sys_ioctl+0x51/0x71
 [<ffffffff8020beee>] system_call+0x7e/0x83

Cheers,
FJP