Pull request: u-boot-ixp

Please pull u-boot-ixp

The following changes since commit 74ac5facb988fc488a707db228b177ead63a6541:
Wolfgang Denk (1):
Merge branch 'inka4x0-ng' of /home/m8/git/u-boot/

are available in the git repository at:

git://denx.de/git/u-boot-ixp.git master

Jean-Christophe PLAGNIOL-VILLARD (4):
Add missing file in gitignore and comments
IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
ARM: support board-specific ethernet PHY init
Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime

Michael Schwingen (1):
PATCH: load ixp42x NPE firmware from separate flash block, remove dead code

 .gitignore                    |   32 ++++++++++++++++++++++++++++++--
 common/main.c                 |   26 ++++++++++++++++++++++++--
 cpu/ixp/npe/IxNpeDl.c         |    2 ++
 cpu/ixp/npe/IxNpeDlImageMgr.c |   12 ++++++++----
 cpu/ixp/serial.c              |   24 ++++++++++--------------
 include/.gitignore            |    1 +
 lib_arm/board.c               |    4 ++++
 7 files changed, 79 insertions(+), 22 deletions(-)

Best Regards,
J.

Dear Jean-Christophe,

Sorry, but I just had to reject some of the patches you merged.

I apologize for not catching this earlier.

I merged those.

This was the one I skipped, as it *adds* dead code (in "#if 0" / "#endif" constructs) instead of removing it as the subject promises.

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is an old custom among my people. When a woman  saves  a  man's
life, he is grateful.
	-- Nona, the Kanuto which woman, "A Private Little War",
	   stardate 4211.8.

I will fix this and add an other patch to allow to load the NPE firmware from flash and ram

Best Regards,
J.

The following changes since commit f188896c2f1594fe749fdb99bbc8c54023cfab3a:
Wolfgang Denk (1):

        Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master

are available in the git repository at:

git://www.denx.de/git/u-boot-ixp.git master

Jean-Christophe PLAGNIOL-VILLARD (2):
IXP: add dynamic microcode addr
ARM: remove useless function board_post_init

Michael Schwingen (7):
load ixp42x NPE firmware from separate flash block, remove dead code
IXP: enable RTS
add AcTux-1 board support
add AcTux-2 board support
add AcTux-3 board support
add AcTux-4 board support
Add AcTux board support

 MAINTAINERS                   |    7 +
 MAKEALL                       |    4 +
 Makefile                      |   12 +
 README                        |    3 +
 board/actux1/Makefile         |   50 +
 board/actux1/actux1.c         |  161 +++
 board/actux1/actux1_hw.h      |   57 +
 board/actux1/config.mk        |    4 +
 board/actux1/u-boot.lds       |   69 +
 board/actux2/Makefile         |   50 +
 board/actux2/actux2.c         |  134 ++
 board/actux2/actux2_hw.h      |   59 +
 board/actux2/config.mk        |    4 +
 board/actux2/u-boot.lds       |   74 +
 board/actux3/Makefile         |   50 +
 board/actux3/actux3.c         |  165 +++
 board/actux3/actux3_hw.h      |   60 +
 board/actux3/config.mk        |    4 +
 board/actux3/u-boot.lds       |   74 +
 board/actux4/Makefile         |   50 +
 board/actux4/actux4.c         |  132 ++
 board/actux4/actux4_hw.h      |   49 +
 board/actux4/config.mk        |    4 +
 board/actux4/u-boot.lds       |   65 +
 board/ixdp425/ixdp425.c       |    5 -
 board/prodrive/pdnb3/pdnb3.c  |    5 -
 board/xm250/xm250.c           |    8 -
 cpu/ixp/npe/IxNpeDl.c         |   32 -
 cpu/ixp/npe/IxNpeDlImageMgr.c |   37 +-
 cpu/ixp/npe/Makefile          |    4 +-
 cpu/ixp/serial.c              |    6 +-
 include/asm-arm/mach-types.h  | 3121 ++++++++++++++++++++++++++++++++++++++++-
 include/configs/actux1.h      |  247 ++++
 include/configs/actux2.h      |  224 +++
 include/configs/actux3.h      |  224 +++
 include/configs/actux4.h      |  218 +++
 36 files changed, 5362 insertions(+), 110 deletions(-)
 create mode 100644 board/actux1/Makefile
 create mode 100644 board/actux1/actux1.c
 create mode 100644 board/actux1/actux1_hw.h
 create mode 100644 board/actux1/config.mk
 create mode 100644 board/actux1/u-boot.lds
 create mode 100644 board/actux2/Makefile
 create mode 100644 board/actux2/actux2.c
 create mode 100644 board/actux2/actux2_hw.h
 create mode 100644 board/actux2/config.mk
 create mode 100644 board/actux2/u-boot.lds
 create mode 100644 board/actux3/Makefile
 create mode 100644 board/actux3/actux3.c
 create mode 100644 board/actux3/actux3_hw.h
 create mode 100644 board/actux3/config.mk
 create mode 100644 board/actux3/u-boot.lds
 create mode 100644 board/actux4/Makefile
 create mode 100644 board/actux4/actux4.c
 create mode 100644 board/actux4/actux4_hw.h
 create mode 100644 board/actux4/config.mk
 create mode 100644 board/actux4/u-boot.lds
 create mode 100644 include/configs/actux1.h
 create mode 100644 include/configs/actux2.h
 create mode 100644 include/configs/actux3.h
 create mode 100644 include/configs/actux4.h

Best Regards,
J.