Skip to contentSkip to conversation

Build Fails on 2.6.24-rc6-mm1[drivers/net/iseries_veth.ko] linking error

DISCUSSION Sudhir Kumar 3 participants 3 messages Jan 9, 2008

lore
Share & tools
lore
#0 lore raw

Hi Andrew,
Build fails on my Power Machine with following error message.

 HOSTLD  arch/powerpc/boot/dtc
 WRAP    arch/powerpc/boot/zImage.pseries
 WRAP    arch/powerpc/boot/zImage.pmac

strip -s -R .comment vmlinux -o arch/powerpc/boot/zImage.iseries
Building modules, stage 2.
MODPOST 264 modules
ERROR: ".driver_add_kobj" [drivers/net/iseries_veth.ko] undefined! make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

Thanks and Regards,
Sudhir Kumar

#1 lore raw
Quoted 7 lines · Sudhir Kumar

Hi Andrew,
Build fails on my Power Machine with following error message.

 HOSTLD  arch/powerpc/boot/dtc
 WRAP    arch/powerpc/boot/zImage.pseries
 WRAP    arch/powerpc/boot/zImage.pmac
Quoted 6 lines

strip -s -R .comment vmlinux -o arch/powerpc/boot/zImage.iseries
Building modules, stage 2.
MODPOST 264 modules
ERROR: ".driver_add_kobj" [drivers/net/iseries_veth.ko] undefined! make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

driver_add_kobj has a single user - iseries_veth. It is even documented in the comment in the file.
And you build iseries_veth as a module but driver_add_kobj is not exported which is why you get this modpost error.

Workaround: make the driver built-in
Fix: export driver_add_kobj or replace usage in iseries_veth.

Sam

#2 lore raw
Quoted 15 lines · Sam Ravnborg
Quoted 7 lines · Sudhir Kumar

Hi Andrew,
Build fails on my Power Machine with following error message.

 HOSTLD  arch/powerpc/boot/dtc
 WRAP    arch/powerpc/boot/zImage.pseries
 WRAP    arch/powerpc/boot/zImage.pmac
Quoted 6 lines

strip -s -R .comment vmlinux -o arch/powerpc/boot/zImage.iseries
Building modules, stage 2.
MODPOST 264 modules
ERROR: ".driver_add_kobj" [drivers/net/iseries_veth.ko] undefined! make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

Quoted 7 lines

driver_add_kobj has a single user - iseries_veth. It is even documented in the comment in the file.
And you build iseries_veth as a module but driver_add_kobj is not exported which is why you get this modpost error.

Workaround: make the driver built-in
Fix: export driver_add_kobj or replace usage in iseries_veth.

I'll properly export this symbol, that's the right fix.

Sorry about this,

greg k-h