TFTP: add host ip addr support
PATCH 1/1 TFTP: add host ip addr support
common/cmd_net.c +1 -1
@@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( tftpboot,3 ,1 , do_tftpb,"tftpboot- boot image via network using TFTP protocol\n" , -"[loadAddress] [bootfilename]\n" +"[loadAddress] [host ip addr:bootfilename]\n" );int do_rarpb (cmd_tbl_t *cmdtp,int flag,int argc,char *argv[])
net/tftp.c +13 -5
@@ -34,7 +34,7 @@#define TFTP_ERROR 5#define TFTP_OACK 6 - +static IPaddr_t TftpServerIP;static int TftpServerPort;/* The UDP port at their end */ static int TftpOurPort;/* The UDP port at our end */ static int TftpTimeoutCount;
@@ -231,7 +231,7 @@ TftpSend (void)break ; } -NetSendUDPPacket (NetServerEther, NetServerIP, TftpServerPort, TftpOurPort, len); +NetSendUDPPacket (NetServerEther, TftpServerIP, TftpServerPort, TftpOurPort, len); }
@@ -464,19 +464,27 @@ TftpStart (void)printf ("*** Warning: no boot file name; using '%s'\n" , tftp_filename); }else { - tftp_filename = BootFile; +char *p=BootFile; + p =strchr (p,':' ); +if (p !=NULL ) { + TftpServerIP =string_to_ip (BootFile); + ++p; +strcpy (tftp_filename, p); + }else { +strcpy (tftp_filename, BootFile); + } }#if defined(CONFIG_NET_MULTI )printf ("Using %s device\n" ,eth_get_name ());#endif -puts ("TFTP from server " );print_IPaddr (NetServerIP); +puts ("TFTP from server " );print_IPaddr (TftpServerIP);puts ("; our IP address is " );print_IPaddr (NetOurIP);/* Check if we need to send across this subnet */ if (NetOurGatewayIP && NetOurSubnetMask) {IPaddr_t OurNet = NetOurIP & NetOurSubnetMask; -IPaddr_t ServerNet = NetServerIP & NetOurSubnetMask; +IPaddr_t ServerNet = TftpServerIP & NetOurSubnetMask;if (OurNet != ServerNet) {puts ("; sending through gateway " );
Signature · 1 line
1.5.3.7
PATCH 1/1 TFTP: add host ip addr support
common/cmd_net.c int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) · line 54
Quoted 12 lines · Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>common/cmd_net.c +1
-1@@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( tftpboot,3 ,1 , do_tftpb,"tftpboot- boot image via network using TFTP protocol\n" , - "[loadAddress] [bootfilename]\n" + "[loadAddress] [host ip addr:bootfilename]\n"
Hi Jean-Christophe,
Interesting. I can see how that would be useful rather than having to modify the dhcp server configuration when you want to use an alternate server.
Critique: the help is misleading: "host ip addr:" is optional so it needs another set of [] around it. Having spaces in "host ip addr" is more readable, but makes it look like it is three things or perhaps a keyword.
I would suggest the following, but there may be a better way...
"[loadAddress] [[hostIPaddr:]bootfilename]\n"
Best regards,
gvb
cover TFTP: add host ip addr support
allow to use a different server as set in serverip
common/cmd_net.c +1 -1
@@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( tftpboot,3 ,1 , do_tftpb,"tftpboot- boot image via network using TFTP protocol\n" , -"[loadAddress] [bootfilename]\n" +"[loadAddress] [[host ip addr]:bootfilename]\n" );int do_rarpb (cmd_tbl_t *cmdtp,int flag,int argc,char *argv[])
net/tftp.c +13 -5
@@ -34,7 +34,7 @@#define TFTP_ERROR 5#define TFTP_OACK 6 - +static IPaddr_t TftpServerIP;static int TftpServerPort;/* The UDP port at their end */ static int TftpOurPort;/* The UDP port at our end */ static int TftpTimeoutCount;
@@ -231,7 +231,7 @@ TftpSend (void)break ; } -NetSendUDPPacket (NetServerEther, NetServerIP, TftpServerPort, TftpOurPort, len); +NetSendUDPPacket (NetServerEther, TftpServerIP, TftpServerPort, TftpOurPort, len); }
@@ -464,19 +464,27 @@ TftpStart (void)printf ("*** Warning: no boot file name; using '%s'\n" , tftp_filename); }else { - tftp_filename = BootFile; +char *p=BootFile; + p =strchr (p,':' ); +if (p !=NULL ) { + TftpServerIP =string_to_ip (BootFile); + ++p; +strcpy (tftp_filename, p); + }else { +strcpy (tftp_filename, BootFile); + } }#if defined(CONFIG_NET_MULTI )printf ("Using %s device\n" ,eth_get_name ());#endif -puts ("TFTP from server " );print_IPaddr (NetServerIP); +puts ("TFTP from server " );print_IPaddr (TftpServerIP);puts ("; our IP address is " );print_IPaddr (NetOurIP);/* Check if we need to send across this subnet */ if (NetOurGatewayIP && NetOurSubnetMask) {IPaddr_t OurNet = NetOurIP & NetOurSubnetMask; -IPaddr_t ServerNet = NetServerIP & NetOurSubnetMask; +IPaddr_t ServerNet = TftpServerIP & NetOurSubnetMask;if (OurNet != ServerNet) {puts ("; sending through gateway " );
Signature · 1 line
1.5.3.7
PATCH 1/1 Fix nfs command help to reflect that the serverip is optional
common/cmd_net.c +1 -1
@@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( nfs,3 ,1 , do_nfs,"nfs\t- boot image via network using NFS protocol\n" , -"[loadAddress] [host ip addr:bootfilename]\n" +"[loadAddress] [[host ip addr]:bootfilename]\n" );#endif
Signature · 1 line
1.5.3.7
PATCH 1/1 Fix nfs command help to reflect that the serverip is optional
Quoted 8 lines · Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>common/cmd_net.c +0
-0
common/cmd_net.c int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) · line 93
Quoted 8 lines
common/cmd_net.c +1
-1@@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( nfs,3 ,1 , do_nfs,"nfs\t- boot image via network using NFS protocol\n" , -"[loadAddress] [host ip addr:bootfilename]\n" +"[loadAddress] [[host ip addr]:bootfilename]\n" );#endif
Sorry for being a PITA, but since we're changing documentation shouldn't this be:
- "[loadAddress] [host ip addr:bootfilename]\n"
+ "[loadAddress] [[host ip addr:]bootfilename]\n"
Can you spot the difference?
regards,
Ben
PATCH 1/1 Fix nfs command help to reflect that the serverip is optional
Quoted 9 lines · In message <[email protected]> you wrote:
common/cmd_net.c int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) · line 92
Quoted 7 lines
common/cmd_net.c +1
-1-"[loadAddress] [host ip addr:bootfilename]\n" +"[loadAddress] [[host ip addr]:bootfilename]\n" );#endif Sorry for being a PITA, but since we're changing documentation shouldn't this be:
You're not a PITA, but a careful reader.
Quoted 5 lines
(quoted diff) +1
-1- "[loadAddress] [host ip addr:bootfilename]\n" + "[loadAddress] [[host ip addr:]bootfilename]\n"Can you spot the difference?
Indeed - it's the difference between right and wrong, between working and failing.
Also, I ask to change this (as gvb previously recommended) into
"[loadAddress] [[HostIpAddr:]bootfilename]\n"
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de EMACS belongs in <sys/errno.h>: Editor too big!
cover TFTP: add host ip addr support
allow to use a different server as set in serverip
common/cmd_net.c +1 -1
@@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( tftpboot,3 ,1 , do_tftpb,"tftpboot- boot image via network using TFTP protocol\n" , -"[loadAddress] [bootfilename]\n" +"[loadAddress] [[hostIPaddr:]bootfilename]\n" );int do_rarpb (cmd_tbl_t *cmdtp,int flag,int argc,char *argv[])
net/tftp.c +13 -5
@@ -34,7 +34,7 @@#define TFTP_ERROR 5#define TFTP_OACK 6 - +static IPaddr_t TftpServerIP;static int TftpServerPort;/* The UDP port at their end */ static int TftpOurPort;/* The UDP port at our end */ static int TftpTimeoutCount;
@@ -231,7 +231,7 @@ TftpSend (void)break ; } -NetSendUDPPacket (NetServerEther, NetServerIP, TftpServerPort, TftpOurPort, len); +NetSendUDPPacket (NetServerEther, TftpServerIP, TftpServerPort, TftpOurPort, len); }
@@ -464,19 +464,27 @@ TftpStart (void)printf ("*** Warning: no boot file name; using '%s'\n" , tftp_filename); }else { - tftp_filename = BootFile; +char *p=BootFile; + p =strchr (p,':' ); +if (p !=NULL ) { + TftpServerIP =string_to_ip (BootFile); + ++p; +strcpy (tftp_filename, p); + }else { +strcpy (tftp_filename, BootFile); + } }#if defined(CONFIG_NET_MULTI )printf ("Using %s device\n" ,eth_get_name ());#endif -puts ("TFTP from server " );print_IPaddr (NetServerIP); +puts ("TFTP from server " );print_IPaddr (TftpServerIP);puts ("; our IP address is " );print_IPaddr (NetOurIP);/* Check if we need to send across this subnet */ if (NetOurGatewayIP && NetOurSubnetMask) {IPaddr_t OurNet = NetOurIP & NetOurSubnetMask; -IPaddr_t ServerNet = NetServerIP & NetOurSubnetMask; +IPaddr_t ServerNet = TftpServerIP & NetOurSubnetMask;if (OurNet != ServerNet) {puts ("; sending through gateway " );
Signature · 1 line
1.5.3.7
PATCH 1/1 Fix nfs command help to reflect that the serverip is optional
common/cmd_net.c +1 -1
@@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( nfs,3 ,1 , do_nfs,"nfs\t- boot image via network using NFS protocol\n" , -"[loadAddress] [host ip addr:bootfilename]\n" +"[loadAddress] [[hostIPaddr:]bootfilename]\n" );#endif
Signature · 1 line
1.5.3.7
cover TFTP: add host ip addr support
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 4 lines · Jean-Christophe PLAGNIOL-VILLARD
net/tftp.c +0
-0@@ -464,19 +464,27 @@ TftpStart (void)printf ("*** Warning: no boot file name; using '%s'\n" , tftp_filename); }else {
net/tftp.c TftpStart (void) · line 475
Quoted 10 lines
net/tftp.c +9
-1- tftp_filename = BootFile; +char *p=BootFile; + p =strchr (p,':' ); +if (p !=NULL ) { + TftpServerIP =string_to_ip (BootFile); + ++p; +strcpy (tftp_filename, p); + }else { +strcpy (tftp_filename, BootFile); + }
Doesn't this mean that TftpServerIP will be undefined if no server is specified. Should it not be:
@@ -464,19 +464,27 @@ TftpStart (void)
printf ("*** Warning: no boot file name; using '%s'\n",
tftp_filename);
} else {
- tftp_filename = BootFile;
+ char *p=BootFile;
+ p = strchr (p, ':');
+ if (p != NULL) {
+ TftpServerIP = string_to_ip (BootFile);
+ ++p;
+ strcpy (tftp_filename, p);
+ } else {
+ TftpServerIP = NetServerIP;
+ strcpy (tftp_filename, BootFile);
+ }
Andre
Signature · 7 lines
Bluewater Systems Ltd - ARM Technology Solutions Centre
Andre Renaud Bluewater Systems Ltd
Phone: +64 3 3779127 (Aus 1 800 148 751) Level 17, 119 Armagh St
Fax: +64 3 3779135 PO Box 13889
Email: arenaud at bluewatersys.com Christchurch
Web: http://www.bluewatersys.com New Zealandcover TFTP: add host ip addr support
Quoted 11 lines · Andre Renaud
Jean-Christophe PLAGNIOL-VILLARD wrote:
Doesn't this mean that TftpServerIP will be undefined if no server is specified. Should it not be:
net/tftp.c +1
-1@@ -464,19 +464,27 @@ TftpStart (void)printf ("*** Warning: no boot file name; using '%s'\n" , tftp_filename); }else { - tftp_filename = BootFile; +char *p=BootFile;
net/tftp.c TftpStart (void) · line 477
Quoted 10 lines
net/tftp.c +9
-0+ p =strchr (p,':' ); +if (p !=NULL ) { + TftpServerIP =string_to_ip (BootFile); + ++p; +strcpy (tftp_filename, p); + }else { + TftpServerIP = NetServerIP; +strcpy (tftp_filename, BootFile); + }
I will prefer
+ TftpServerIP = NetServerIP;
if (BootFile[0] == '\0') {
sprintf(default_filename, "%02lX%02lX%02lX%02lX.img",
NetOurIP & 0xFF,
@@ -464,19 +465,26 @@ TftpStart (void)
printf ("*** Warning: no boot file name; using '%s'\n",
tftp_filename);
} else {
- tftp_filename = BootFile;
+ char *p=BootFile;
+ p = strchr (p, ':');
+ if (p != NULL) {
+ TftpServerIP = string_to_ip (BootFile);
+ ++p;
+ strcpy (tftp_filename, p);+ } else
+ strcpy (tftp_filename, BootFile);
Quoted 10 lines
Andre
Signature · 7 lines
Bluewater Systems Ltd - ARM Technology Solutions Centre Andre Renaud Bluewater Systems Ltd Phone: +64 3 3779127 (Aus 1 800 148 751) Level 17, 119 Armagh St Fax: +64 3 3779135 PO Box 13889 Email: arenaud at bluewatersys.com Christchurch Web: http://www.bluewatersys.com New Zealand
PATCH 1/1 Fix nfs command help to reflect that the serverip is optional
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 7 lines · In message <[email protected]> you wrote:
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>common/cmd_net.c +0
-0
common/cmd_net.c int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) · line 92
Quoted 7 lines
common/cmd_net.c +1
-1@@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( nfs,3 ,1 , do_nfs,"nfs\t- boot image via network using NFS protocol\n" , -"[loadAddress] [host ip addr:bootfilename]\n" +"[loadAddress] [[host ip addr]:bootfilename]\n" );#endif
Rejected, because this is not correct:
=> print serverip
serverip=192.168.1.1
=> nfs 200000 :/opt/eldk/ppc_4xx/images/uImage Using ppc_4xx_eth0 device
File transfer via NFS from server 0.0.0.0; our IP address is 192.168.80.2
Filename '/opt/eldk/ppc_4xx/images/uImage'.
Load address: 0x200000
Loading: *** ERROR: Cannot mount
...
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Make it right before you make it faster.
Wolfgang Denk
NAKcover TFTP: add host ip addr support
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 9 lines · In message <[email protected]> you wrote:
allow to use a different server as set in serverip
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>common/cmd_net.c +0
-0
common/cmd_net.c int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) · line 54
Quoted 5 lines
common/cmd_net.c +1
-1@@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( tftpboot,3 ,1 , do_tftpb,"tftpboot- boot image via network using TFTP protocol\n" , - "[loadAddress] [bootfilename]\n" + "[loadAddress] [[host ip addr]:bootfilename]\n"
NAK.
Ben, please don't apply. I reject this patch.
Jean-Christophe - as already discussed on IRC I really ask you to pay attemtion to gvb's comments on your patch:
| Critique: the help is misleading: "host ip addr:" is optional so it | needs another set of [] around it. Having spaces in "host ip addr" is | more readable, but makes it look like it is three things or perhaps a | keyword. | | I would suggest the following, but there may be a better way... | "[loadAddress] [[hostIPaddr:]bootfilename]\n"
Also make sure that you place the ';' in the right pair of brackets.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "The X11 source code style is ATROCIOUS and should not be used as a model." - Doug Gwyn
cover TFTP: add host ip addr support
allow to use a different server as set in serverip
common/cmd_net.c +1 -1
@@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( tftpboot,3 ,1 , do_tftpb,"tftpboot- boot image via network using TFTP protocol\n" , -"[loadAddress] [bootfilename]\n" +"[loadAddress] [[host ip addr:]bootfilename]\n" );int do_rarpb (cmd_tbl_t *cmdtp,int flag,int argc,char *argv[])
net/tftp.c +13 -5
@@ -34,7 +34,7 @@#define TFTP_ERROR 5#define TFTP_OACK 6 - +static IPaddr_t TftpServerIP;static int TftpServerPort;/* The UDP port at their end */ static int TftpOurPort;/* The UDP port at our end */ static int TftpTimeoutCount;
@@ -231,7 +231,7 @@ TftpSend (void)break ; } -NetSendUDPPacket (NetServerEther, NetServerIP, TftpServerPort, TftpOurPort, len); +NetSendUDPPacket (NetServerEther, TftpServerIP, TftpServerPort, TftpOurPort, len); }
@@ -464,19 +464,27 @@ TftpStart (void)printf ("*** Warning: no boot file name; using '%s'\n" , tftp_filename); }else { - tftp_filename = BootFile; +char *p=BootFile; + p =strchr (p,':' ); +if (p !=NULL ) { + TftpServerIP =string_to_ip (BootFile); + ++p; +strcpy (tftp_filename, p); + }else { +strcpy (tftp_filename, BootFile); + } }#if defined(CONFIG_NET_MULTI )printf ("Using %s device\n" ,eth_get_name ());#endif -puts ("TFTP from server " );print_IPaddr (NetServerIP); +puts ("TFTP from server " );print_IPaddr (TftpServerIP);puts ("; our IP address is " );print_IPaddr (NetOurIP);/* Check if we need to send across this subnet */ if (NetOurGatewayIP && NetOurSubnetMask) {IPaddr_t OurNet = NetOurIP & NetOurSubnetMask; -IPaddr_t ServerNet = NetServerIP & NetOurSubnetMask; +IPaddr_t ServerNet = TftpServerIP & NetOurSubnetMask;if (OurNet != ServerNet) {puts ("; sending through gateway " );
Signature · 1 line
1.5.3.7
PATCH 1/1 Fix nfs command help to reflect that the serverip is optional
common/cmd_net.c +1 -1
@@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( nfs,3 ,1 , do_nfs,"nfs\t- boot image via network using NFS protocol\n" , -"[loadAddress] [host ip addr:bootfilename]\n" +"[loadAddress] [[host ip addr:]bootfilename]\n" );#endif
Signature · 1 line
1.5.3.7
PATCH 1/1 Fix nfs command help to reflect that the serverip is optional
common/cmd_net.c int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) · line 90
Quoted 12 lines · In message <[email protected]> you wrote:
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>common/cmd_net.c +1
-1@@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( nfs,3 ,1 , do_nfs,"nfs\t- boot image via network using NFS protocol\n" , - "[loadAddress] [host ip addr:bootfilename]\n" + "[loadAddress] [[host ip addr:]bootfilename]\n"
Rejected. Please see previous reject message for the reason.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
In the beginning, there was nothing, which exploded.
- Terry Pratchett, _Lords and Ladies_cover TFTP: add host ip addr support
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 9 lines · In message <[email protected]> you wrote:
allow to use a different server as set in serverip
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>common/cmd_net.c +0
-0
common/cmd_net.c int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) · line 54
Quoted 5 lines
common/cmd_net.c +1
-1@@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])U_BOOT_CMD ( tftpboot,3 ,1 , do_tftpb,"tftpboot- boot image via network using TFTP protocol\n" , - "[loadAddress] [bootfilename]\n" + "[loadAddress] [[host ip addr:]bootfilename]\n"
Rejected. Please READ what I wrote before. Heed gvb's suggestion.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Hiring experienced unix people is like a built-in filter against
idiots. Hiring experienced NT people provides no such guarantee.
-- Miguel Cruz in WgL96.349$CC.122704 at typhoon2.ba-dsg.netcover TFTP: add host ip addr support
In reply to Jean-Christophe PLAGNIOL-VILLARDJean-Christophe PLAGNIOL-VILLARD wrote:
<snip>
This doesn't work.
Baseline: (before patch applied):
=> tftp 100000 mpc8349emds/u-boot.bin.newnfs
Speed: 100, full duplex
Using TSEC0 device
TFTP from server 10.69.69.21; our IP address is 10.69.69.201 Filename 'mpc8349emds/u-boot.bin.newnfs'.
Load address: 0x100000
Loading: ####################################### done
Bytes transferred = 198116 (305e4 hex)
Problem #1. First time through, with patch. Doesn't use serverip, so no default server:
=> tftp 100000 mpc8349emds/u-boot.bin
Speed: 100, full duplex
Using TSEC0 device
TFTP from server 0.0.0.0; our IP address is 10.69.69.201; sending through gatew1 Filename '<NULL>'.
Load address: 0x100000
Loading: *
TFTP error: 'File not found' (1)
Starting again
Problem #2. Doesn't parse file name:
=> tftp 100000 10.69.69.21:mpc8349emds/u-boot.bin
Speed: 100, full duplex
Using TSEC0 device
TFTP from server 10.69.69.21; our IP address is 10.69.69.201 Filename '<NULL>'.
Load address: 0x100000
Loading: ##################################
done
Bytes transferred = 170996 (29bf4 hex)
Please fix these if you want the code included.
regards,
Ben
PATCH 1/1 TFTP: add host ip addr support
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 2 lines · On Mon, 24 Dec 2007 16:55:38 +0100 Jean-Christophe PLAGNIOL-VILLARD…
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
<[email protected]>
Jean-Christophe, I love your work, but your changelogs totally suck. Could you please add a bit of text explaining what kind of problem this patch solves?
Haavard
PATCH 1/1 TFTP: add host ip addr support
Quoted 9 lines · In message <20071226214227.499a2109@siona> you wrote:
Quoted 2 lines · On Mon, 24 Dec 2007 16:55:38 +0100 Jean-Christophe PLAGNIOL-VILLARD…
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
<[email protected]>Jean-Christophe, I love your work, but your changelogs totally suck. Could you please add a bit of text explaining what kind of problem this patch solves?
I support this request.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Testing can show the presense of bugs, but not their absence.
-- Edsger Dijkstra