Skip to contentSkip to conversation

Added support for the mgsuvd board from keymile.

PATCH New Heiko Schocher 3 participants 14 messages Jan 11, 2008 – Jan 12, 2008 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 Added support for the mgsuvd board from keymile.

---
 MAKEALL                  |    1 +
 Makefile                 |    3 +
 board/mgsuvd/Makefile    |   44 ++++++
 board/mgsuvd/config.mk   |   28 ++++
 board/mgsuvd/mgsuvd.c    |  216 ++++++++++++++++++++++++++++++
 board/mgsuvd/u-boot.lds  |  144 ++++++++++++++++++++
 cpu/mpc8xx/cpu.c         |   16 +++
 include/commproc.h       |   26 ++++
 include/configs/mgsuvd.h |  325 ++++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 803 insertions(+), 0 deletions(-)
 create mode 100644 board/mgsuvd/Makefile
 create mode 100644 board/mgsuvd/config.mk
 create mode 100644 board/mgsuvd/mgsuvd.c
 create mode 100644 board/mgsuvd/u-boot.lds
 create mode 100644 include/configs/mgsuvd.h
MAKEALL +1 -0
index 4cbddc2..3224497 100755
@@ -107,6 +107,7 @@ LIST_8xx="		\
 	lwmon		\
 	MBX		\
 	MBX860T		\
+	mgsuvd		\
 	MHPC		\
 	MPC86xADS	\
 	MPC885ADS	\
Makefile +3 -0
index 35e9031..7c1fbb8 100644
@@ -846,6 +846,9 @@ MBX_config	\
 MBX860T_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 
+mgsuvd_config:		unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd
+
 MHPC_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 
board/mgsuvd/Makefile new file +44 -0

44 lines not on this page · raw message

board/mgsuvd/config.mk new file +28 -0
new file mode 100644
index 0000000..8625cea
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2007
+# Heiko Schocher, DENX Software Engineering, hs at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mgsvud boards
+#
+
+TEXT_BASE = 0xf0000000
board/mgsuvd/mgsuvd.c new file +216 -0

216 lines not on this page · raw message

board/mgsuvd/u-boot.lds new file +144 -0

144 lines not on this page · raw message

cpu/mpc8xx/cpu.c +16 -0
index 97112f0..c878352 100644
@@ -39,6 +39,12 @@
 #include <mpc8xx.h>
 #include <asm/cache.h>
 
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 static char *cpu_warning = "\n         " \
@@ -632,3 +638,13 @@ void reset_8xx_watchdog (volatile immap_t * immr)
 #endif /* CONFIG_WATCHDOG */
 
 /* ------------------------------------------------------------------------- */
+#if defined(CONFIG_OF_LIBFDT)
+void ft_cpu_setup (void *blob, bd_t *bd)
+{
+	char * cpu_path = "/cpus/" OF_CPU;
+
+	do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
+	do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
+}
+#endif /* CONFIG_OF_LIBFDT */
include/commproc.h +26 -0
index 12400e3..53659c2 100644
@@ -1120,6 +1120,32 @@ typedef struct scc_enet {
 #define SICR_ENET_CLKRT	((uint)0x0000003d)
 #endif	/* CONFIG_MBX */
 
+/***  MGSUVD  *********************************************************/
+
+/* The MGSUVD Service Module uses SCC3 for Ethernet */
+
+#ifdef CONFIG_MGSUVD
+#define PROFF_ENET	PROFF_SCC3		/* Ethernet on SCC3 */
+#define CPM_CR_ENET	CPM_CR_CH_SCC3
+#define SCC_ENET	2
+#define PA_ENET_RXD	((ushort)0x0010)	/* PA 11 */
+#define PA_ENET_TXD	((ushort)0x0020)	/* PA 10 */
+#define PA_ENET_RCLK	((ushort)0x1000)	/* PA  3 CLK 5 */
+#define PA_ENET_TCLK	((ushort)0x2000)	/* PA  2 CLK 6 */
+
+#define PC_ENET_TENA	((ushort)0x0004)	/* PC 13 */
+
+#define PC_ENET_RENA	((ushort)0x0200)	/* PC  6 */
+#define PC_ENET_CLSN	((ushort)0x0100)	/* PC  7 */
+
+/* Control bits in the SICR to route TCLK (CLK6) and RCLK (CLK5) to
+ * SCC3.  Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x00FF0000)
+#define SICR_ENET_CLKRT	((uint)0x00250000)
+#endif	/* CONFIG_MGSUVD */
+
+
 /***  MHPC  ********************************************************/
 
 #if defined(CONFIG_MHPC)
include/configs/mgsuvd.h new file +325 -0

325 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#1 lore raw

PATCH 2/2 Enable SMC microcode relocation patch for SMC1.

---
 README                |    4 ++
 cpu/mpc8xx/cpu_init.c |    6 ++-
 cpu/mpc8xx/serial.c   |   21 +++++++++++
 cpu/mpc8xx/upatch.c   |   94 ++++++++++++++++++++++++++++++++++++++++++++++++-
 include/commproc.h    |    2 +
 5 files changed, 124 insertions(+), 3 deletions(-)
README +4 -0
index 26f93c2..f8a4f48 100644
@@ -2269,6 +2269,10 @@ Low Level (hardware related) configuration options:
 		enable I2C microcode relocation patch (MPC8xx);
 		define relocation offset in DPRAM [DSP2]
 
+- CFG_SMC_UCODE_PATCH, CFG_SMC_DPMEM_OFFSET [0x1FC0]:
+		enable SMC microcode relocation patch (MPC8xx);
+		define relocation offset in DPRAM [SMC1]
+
 - CFG_SPI_UCODE_PATCH, CFG_SPI_DPMEM_OFFSET [0x1FC0]:
 		enable SPI microcode relocation patch (MPC8xx);
 		define relocation offset in DPRAM [SCC4]
cpu/mpc8xx/cpu_init.c +4 -2
index c79e578..fb3414a 100644
@@ -31,7 +31,8 @@
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH)
+#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) || \
+    defined(CFG_SMC_UCODE_PATCH)
 void cpm_load_patch (volatile immap_t * immr);
 #endif
 
@@ -253,7 +254,8 @@ void cpu_init_f (volatile immap_t * immr)
 	immr->im_cpm.cp_rccr = CFG_RCCR;
 #endif
 
-#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH)
+#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) || \
+    defined(CFG_SMC_UCODE_PATCH)
 	cpm_load_patch (immr);	/* load mpc8xx  microcode patch */
 #endif
 }
cpu/mpc8xx/serial.c +21 -0
index 68804cc..ad02299 100644
@@ -124,6 +124,12 @@ static int smc_init (void)
 
 	sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
 	up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
+#ifdef CFG_SMC_UCODE_PATCH
+	up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase];
+#else
+	/* Disable relocation */
+	up->smc_rpbase = 0;
+#endif
 
 	/* Disable transmitter/receiver.
 	*/
@@ -212,6 +218,12 @@ static int smc_init (void)
 	up->smc_tbase = dpaddr+sizeof(cbd_t);
 	up->smc_rfcr = SMC_EB;
 	up->smc_tfcr = SMC_EB;
+#if defined (CFG_SMC_UCODE_PATCH)
+	up->smc_rbptr = up->smc_rbase;
+	up->smc_tbptr = up->smc_tbase;
+	up->smc_rstate = 0;
+	up->smc_tstate = 0;
+#endif
 
 #if defined(CONFIG_MBX)
 	board_serial_init();
@@ -288,6 +300,9 @@ smc_putc(const char c)
 		smc_putc ('\r');
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
+#ifdef CFG_SMC_UCODE_PATCH
+	up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
+#endif
 
 	tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase];
 
@@ -326,6 +341,9 @@ smc_getc(void)
 	unsigned char		c;
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
+#ifdef CFG_SMC_UCODE_PATCH
+	up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
+#endif
 
 	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
 
@@ -351,6 +369,9 @@ smc_tstc(void)
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
+#ifdef CFG_SMC_UCODE_PATCH
+	up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
+#endif
 
 	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
 
cpu/mpc8xx/upatch.c +93 -1

119 lines not on this page · raw message

include/commproc.h +2 -0
index 53659c2..6b1b4e8 100644
@@ -159,6 +159,8 @@ typedef struct smc_uart {
 	ushort	smc_brkec;	/* rcv'd break condition counter */
 	ushort	smc_brkcr;	/* xmt break count register */
 	ushort	smc_rmask;	/* Temporary bit mask */
+	u_char	res1[8];
+	ushort	smc_rpbase;	/* Relocation pointer */
 } smc_uart_t;
 
 /* Function code bits.
Signature · 1 line
1.5.2.2
#2 lore raw

PATCH 1/2 Added support for the mgcoge board from keymile.

---
 MAKEALL                  |    1 +
 Makefile                 |    3 +
 board/mgcoge/Makefile    |   50 +++++++
 board/mgcoge/config.mk   |   24 ++++
 board/mgcoge/mgcoge.c    |  345 ++++++++++++++++++++++++++++++++++++++++++++++
 cpu/mpc8260/ether_scc.c  |    9 +-
 include/configs/mgcoge.h |  317 ++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 745 insertions(+), 4 deletions(-)
 create mode 100644 board/mgcoge/Makefile
 create mode 100644 board/mgcoge/config.mk
 create mode 100644 board/mgcoge/mgcoge.c
 create mode 100644 include/configs/mgcoge.h
MAKEALL +1 -0
index 3224497..2ab67d1 100755
@@ -281,6 +281,7 @@ LIST_8260="		\
 	hymod		\
 	IPHASE4539	\
 	ISPAN		\
+	mgcoge		\
 	MPC8260ADS	\
 	MPC8266ADS	\
 	MPC8272ADS	\
Makefile +3 -0
index 7c1fbb8..5e67777 100644
@@ -1539,6 +1539,9 @@ ISPAN_REVB_config:	unconfig
 	fi
 	@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
 
+mgcoge_config	:	unconfig
+	@$(MKCONFIG) mgcoge ppc mpc8260 mgcoge
+
 MPC8260ADS_config	\
 MPC8260ADS_lowboot_config	\
 MPC8260ADS_33MHz_config	\
board/mgcoge/Makefile new file +50 -0

50 lines not on this page · raw message

board/mgcoge/config.mk new file +24 -0
new file mode 100644
index 0000000..143bc9f
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2007
+# Heiko Schocher, DENX Software Engineering, hs at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFE000000
board/mgcoge/mgcoge.c new file +345 -0

345 lines not on this page · raw message

cpu/mpc8260/ether_scc.c +5 -4
index e56839d..633d053 100644
@@ -77,7 +77,9 @@
 
 #define TX_BUF_CNT 2
 
-#define TOUT_LOOP 1000000
+#if !defined(CFG_SCC_TOUT_LOOP)
+  #define CFG_SCC_TOUT_LOOP 1000000
+#endif
 
 static char txbuf[TX_BUF_CNT][ DBUF_LENGTH ];
 
@@ -109,7 +111,7 @@ int eth_send(volatile void *packet, int length)
     }
 
     for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
-	if (i >= TOUT_LOOP) {
+	if (i >= CFG_SCC_TOUT_LOOP) {
 	    puts ("scc: tx buffer not ready\n");
 	    goto out;
 	}
@@ -121,7 +123,7 @@ int eth_send(volatile void *packet, int length)
 				BD_ENET_TX_WRAP);
 
     for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
-	if (i >= TOUT_LOOP) {
+	if (i >= CFG_SCC_TOUT_LOOP) {
 	    puts ("scc: tx error\n");
 	    goto out;
 	}
@@ -262,7 +264,6 @@ int eth_init(bd_t *bis)
     pram_ptr->sen_taddrm = 0x0;   /* Tmp Address (unused) */
     pram_ptr->sen_taddrl = 0x0;   /* Tmp Address (LSB) (unused) */
 
-
     /* 24.21 - (19): Initialize RxBD */
     for (i = 0; i < PKTBUFSRX; i++)
     {
include/configs/mgcoge.h new file +317 -0

317 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#3 lore raw

PATCH 2/2 Fix defaultconfig for the mgcoge board.

---
 include/configs/mgcoge.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
include/configs/mgcoge.h +1 -1
index ab28778..3de2466 100644
@@ -108,7 +108,7 @@
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
-		"${netmask}:${hostname}:${netdev}:on panic=1 "		\
+		"${netmask}:${hostname}:${netdev}:off panic=1 "		\
 		"console=${console}\0"					\
 	"net_nfs=tftp ${kernel_addr} ${bootfile}; "			\
 		"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcon;"\
Signature · 1 line
1.5.2.2
#4 lore raw

PATCH 2/2 Fix defaultconfig for the mgcoge board.

Quoted 4 lines · In message <[email protected]> you wrote:
---
 include/configs/mgcoge.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The speed of time is one second per second.
#5 lore raw

PATCH 1/2 Added support for the mgcoge board from keymile.

In reply to Heiko Schocher
Quoted 4 lines · Heiko Schocher
---
 MAKEALL                  |    1 +
 Makefile                 |    3 +

Again, MAINTAINER entry missing.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================

#6 lore raw

PATCH 1/2 Added support for the mgcoge board from keymile.

Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 4 lines · Heiko Schocher
---
 MAKEALL                  |    1 +
 Makefile                 |    3 +

Again, MAINTAINER entry missing.

I did this for Heiko.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Doubt is a pain too lonely to know that faith is his twin brother.
- Kahlil Gibran
#7 lore raw

PATCH 1/2 Added support for the mgcoge board from keymile.

In reply to Heiko Schocher
Quoted 14 lines · In message <[email protected]> you wrote:
---
 MAKEALL                  |    1 +
 Makefile                 |    3 +
 board/mgcoge/Makefile    |   50 +++++++
 board/mgcoge/config.mk   |   24 ++++
 board/mgcoge/mgcoge.c    |  345 ++++++++++++++++++++++++++++++++++++++++++++++
 cpu/mpc8260/ether_scc.c  |    9 +-
 include/configs/mgcoge.h |  317 ++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 745 insertions(+), 4 deletions(-)
 create mode 100644 board/mgcoge/Makefile
 create mode 100644 board/mgcoge/config.mk
 create mode 100644 board/mgcoge/mgcoge.c
 create mode 100644 include/configs/mgcoge.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Knowledge, sir, should be free to all!
	-- Harry Mudd, "I, Mudd", stardate 4513.3
#8 lore raw

PATCH 2/2 Enable SMC microcode relocation patch for SMC1.

In reply to Heiko Schocher
Quoted 8 lines · In message <[email protected]> you wrote:
---
 README                |    4 ++
 cpu/mpc8xx/cpu_init.c |    6 ++-
 cpu/mpc8xx/serial.c   |   21 +++++++++++
 cpu/mpc8xx/upatch.c   |   94 ++++++++++++++++++++++++++++++++++++++++++++++++-
 include/commproc.h    |    2 +
 5 files changed, 124 insertions(+), 3 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
... bacteriological warfare ... hard to believe we were once foolish
enough to play around with that.
	-- McCoy, "The Omega Glory", stardate unknown
#9 lore raw

PATCH 1/2 Added support for the mgsuvd board from keymile.

In reply to Heiko Schocher
Quoted 4 lines · Heiko Schocher
---
 MAKEALL                  |    1 +
 Makefile                 |    3 +

Please add an entry in MAINTAINERS too.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================

#10 lore raw

PATCH 1/2 Added support for the mgsuvd board from keymile.

Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 4 lines · Heiko Schocher
---
 MAKEALL                  |    1 +
 Makefile                 |    3 +

Please add an entry in MAINTAINERS too.

I did this for Heiko.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Unsichtbar macht sich die Dummheit, indem sie immer  gr??ere  Ausma?e
annimmt.                             -- Bertold Brecht: Der Tui-Roman
#11 lore raw

PATCH 1/2 Added support for the mgsuvd board from keymile.

Hello Wolfgang,

Quoted 9 lines · Wolfgang Denk
Quoted 6 lines · In message <[email protected]> you wrote:
Quoted 4 lines · Heiko Schocher
---
 MAKEALL                  |    1 +
 Makefile                 |    3 +

Please add an entry in MAINTAINERS too.

I did this for Heiko.

Thanks! I mailed yesterday a Patch, but unfortunately I forgot the list :-(, so just Stefan got the EMail ... here the patch:

#12 lore raw

PATCH 1/2 Added support for the mgsuvd board from keymile.

Dear Heiko,

Quoted 6 lines · in message <[email protected]> you wrote:

Subject: [PATCH] [MAINTAINER] Added MAINTAINER entry for the
ids8247, jupiter, mgcoge, mgsuvd, municse, sc3 and uc101 boards.

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
This all sounds complicated, but it mostly does excatly what you  ex-
pect. It's just difficult for us to explain what you expect...
                       - L. Wall & R. L. Schwartz, _Programming Perl_
#13 lore raw

PATCH 1/2 Added support for the mgsuvd board from keymile.

In reply to Heiko Schocher
Quoted 17 lines · In message <[email protected]> you wrote:
---
 MAKEALL                  |    1 +
 Makefile                 |    3 +
 board/mgsuvd/Makefile    |   44 ++++++
 board/mgsuvd/config.mk   |   28 ++++
 board/mgsuvd/mgsuvd.c    |  216 ++++++++++++++++++++++++++++++
 board/mgsuvd/u-boot.lds  |  144 ++++++++++++++++++++
 cpu/mpc8xx/cpu.c         |   16 +++
 include/commproc.h       |   26 ++++
 include/configs/mgsuvd.h |  325 ++++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 803 insertions(+), 0 deletions(-)
 create mode 100644 board/mgsuvd/Makefile
 create mode 100644 board/mgsuvd/config.mk
 create mode 100644 board/mgsuvd/mgsuvd.c
 create mode 100644 board/mgsuvd/u-boot.lds
 create mode 100644 include/configs/mgsuvd.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 8 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Mike's Law: For a lumber company employing two men and a cut-off saw,
the marginal product of labor for any number  of  additional  workers
equals  zero  until the acquisition of another cut-off saw. Let's not
even consider a chainsaw.
- Mike Dennison [You could always  schedule the saw, though - ed.]