Skip to contentSkip to conversation

Not use absolute MBAR in MPC5200 Bestcomm firmware

PATCH New Oliver Weber 2 participants 2 messages Jan 9, 2008 – Jan 12, 2008

lore
Share & tools
lore

Oliver Weber

author
#0 lore raw

PATCH 1/1 Not use absolute MBAR in MPC5200 Bestcomm firmware

I hope now everything is ok with the format.

Best Regards

Oliver Weber

Signed-off-by Oliver Weber <[email protected]>
cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S +4 -4
index 1d83fe2..a07c776 100644
@@ -23,7 +23,7 @@ scEthernetRecv_Entry:		/* Task 0 */
 .long   0x00000000
 .long   0x00000000
 .long   scEthernetRecv_CSave - taskTable	/* Task 0 context save space */
-.long   0xf0000000
+.long   CFG_MBAR
 .globl scEthernetXmit_Entry
 scEthernetXmit_Entry:		/* Task 1 */
 .long   scEthernetXmit_TDT - taskTable	/* Task 1 Descriptor Table */

@@ -33,7 +33,7 @@ scEthernetXmit_Entry:		/* Task 1 */
 .long   0x00000000
 .long   0x00000000
 .long   scEthernetXmit_CSave - taskTable	/* Task 1 context save space */
-.long   0xf0000000
+.long   CFG_MBAR
 
 
 .globl scEthernetRecv_TDT

@@ -151,7 +151,7 @@ scEthernetRecv_VarTab:	/* Task 0 Variabl
 .long   0x00000000	/* var[6] */
 .long   0x00000000	/* var[7] */
 .long   0x00000000	/* var[8] */
-.long   0xf0008800	/* var[9] */
+.long   (CFG_MBAR + 0x8800)	/* var[9] */
 .long   0x00000008	/* var[10] */
 .long   0x0000000c	/* var[11] */
 .long   0x80000000	/* var[12] */

@@ -190,7 +190,7 @@ scEthernetXmit_VarTab:	/* Task 1 Variabl
 .long   0x00000000	/* var[8] */
 .long   0x00000000	/* var[9] */
 .long   0x00000000	/* var[10] */
-.long   0xf0008800	/* var[11] */
+.long   (CFG_MBAR + 0x8800)	/* var[11] */
 .long   0x00000000	/* var[12] */
 .long   0x80000000	/* var[13] */
 .long   0x10000000	/* var[14] */
Signature · 2 lines
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
Applied
#1 lore raw

PATCH 1/1 Not use absolute MBAR in MPC5200 Bestcomm firmware

Quoted 7 lines · In message <[email protected]> you wrote:

I hope now everything is ok with the format.

Best Regards

Oliver Weber

Signed-off-by Oliver Weber <[email protected]>

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Always try to do things in chronological order; it's  less  confusing
that way.