Skip to contentSkip to conversation

asus-laptop new write_acpi_int

PATCH Applied Corentin CHARY 2 participants 2 messages Jan 16, 2008 – Feb 7, 2008 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 asus-laptop new write_acpi_int

From: Corentin CHARY <[email protected]>

Just a little modification of write_acpi_int

---
 asus-laptop.c |   24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)
drivers/misc/asus-laptop.c +15 -9
@@ -255,7 +255,7 @@
  * method is searched within the scope of the handle, can be NULL. The output
  * of the method is written is output, which can also be NULL
  *
- * returns 1 if write is successful, 0 else.
+ * returns 0 if write is successful, -1 else.
  */
 static int write_acpi_int(acpi_handle handle, const char *method, int val,
 			  struct acpi_buffer *output)
@@ -264,13 +264,19 @@
 	union acpi_object in_obj;	//the only param we use
 	acpi_status status;
 
+	if (!handle)
+		return 0;
+
 	params.count = 1;
 	params.pointer = &in_obj;
 	in_obj.type = ACPI_TYPE_INTEGER;
 	in_obj.integer.value = val;
 
 	status = acpi_evaluate_object(handle, (char *)method, &params, output);
-	return (status == AE_OK);
+	if (status == AE_OK)
+		return 0;
+	else
+		return -1;
 }
 
 static int read_wireless_status(int mask)
@@ -336,7 +342,7 @@
 		break;
 	}
 
-	if (handle && !write_acpi_int(handle, NULL, out, NULL))
+	if (write_acpi_int(handle, NULL, out, NULL))
 		printk(ASUS_WARNING " write failed %x\n", mask);
 }
 
@@ -416,7 +422,7 @@
 	value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
 	/* 0 <= value <= 15 */
 
-	if (!write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
+	if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
 		printk(ASUS_WARNING "Error changing brightness\n");
 		ret = -EIO;
 	}
@@ -546,7 +552,7 @@
 
 	rv = parse_arg(buf, count, &value);
 	if (rv > 0) {
-		if (!write_acpi_int(ledd_set_handle, NULL, value, NULL))
+		if (write_acpi_int(ledd_set_handle, NULL, value, NULL))
 			printk(ASUS_WARNING "LED display write failed\n");
 		else
 			hotk->ledd_status = (u32) value;
@@ -591,7 +597,7 @@
 static void set_display(int value)
 {
 	/* no sanity check needed for now */
-	if (!write_acpi_int(display_set_handle, NULL, value, NULL))
+	if (write_acpi_int(display_set_handle, NULL, value, NULL))
 		printk(ASUS_WARNING "Error setting display\n");
 	return;
 }
@@ -648,7 +654,7 @@
  */
 static void set_light_sens_switch(int value)
 {
-	if (!write_acpi_int(ls_switch_handle, NULL, value, NULL))
+	if (write_acpi_int(ls_switch_handle, NULL, value, NULL))
 		printk(ASUS_WARNING "Error setting light sensor switch\n");
 	hotk->light_switch = value;
 }
@@ -673,7 +679,7 @@
 
 static void set_light_sens_level(int value)
 {
-	if (!write_acpi_int(ls_level_handle, NULL, value, NULL))
+	if (write_acpi_int(ls_level_handle, NULL, value, NULL))
 		printk(ASUS_WARNING "Error setting light sensor level\n");
 	hotk->light_level = value;
 }
@@ -861,7 +867,7 @@
 		printk(ASUS_WARNING "Couldn't get the DSDT table header\n");
 
 	/* We have to write 0 on init this far for all ASUS models */
-	if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
+	if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
 		printk(ASUS_ERR "Hotkey initialization failed\n");
 		return -ENODEV;
 	}

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

A message that is not in the archive (sent off-list or not yet received): 200801161656.42640.corentincj-EjuBZuxMvz2sTnJN9+BGXg@public.gmane.org

Applied
#2 lore raw

applied.

thanks,
-len

Quoted 105 lines · Corentin CHARY

From: Corentin CHARY <[email protected]>

Just a little modification of write_acpi_int

---
 asus-laptop.c |   24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)
drivers/misc/asus-laptop.c +15 -10
@@ -255,7 +255,7 @@
  * method is searched within the scope of the handle, can be NULL. The output
  * of the method is written is output, which can also be NULL
  *
- * returns 1 if write is successful, 0 else.
+ * returns 0 if write is successful, -1 else.
  */
 static int write_acpi_int(acpi_handle handle, const char *method, int val,
 			  struct acpi_buffer *output)
@@ -264,13 +264,19 @@
 	union acpi_object in_obj;	//the only param we use
 	acpi_status status;
 
+	if (!handle)
+		return 0;
+
 	params.count = 1;
 	params.pointer = &in_obj;
 	in_obj.type = ACPI_TYPE_INTEGER;
 	in_obj.integer.value = val;
 
 	status = acpi_evaluate_object(handle, (char *)method, &params, output);
-	return (status == AE_OK);
+	if (status == AE_OK)
+		return 0;
+	else
+		return -1;
 }
 
 static int read_wireless_status(int mask)
@@ -336,7 +342,7 @@
 		break;
 	}
 
-	if (handle && !write_acpi_int(handle, NULL, out, NULL))
+	if (write_acpi_int(handle, NULL, out, NULL))
 		printk(ASUS_WARNING " write failed %x\n", mask);
 }
 
@@ -416,7 +422,7 @@
 	value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
 	/* 0 <= value <= 15 */
 
-	if (!write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
+	if (write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
 		printk(ASUS_WARNING "Error changing brightness\n");
 		ret = -EIO;
 	}
@@ -546,7 +552,7 @@
 
 	rv = parse_arg(buf, count, &value);
 	if (rv > 0) {
-		if (!write_acpi_int(ledd_set_handle, NULL, value, NULL))
+		if (write_acpi_int(ledd_set_handle, NULL, value, NULL))
 			printk(ASUS_WARNING "LED display write failed\n");
 		else
 			hotk->ledd_status = (u32) value;
@@ -591,7 +597,7 @@
 static void set_display(int value)
 {
 	/* no sanity check needed for now */
-	if (!write_acpi_int(display_set_handle, NULL, value, NULL))
+	if (write_acpi_int(display_set_handle, NULL, value, NULL))
 		printk(ASUS_WARNING "Error setting display\n");
 	return;
 }
@@ -648,7 +654,7 @@
  */
 static void set_light_sens_switch(int value)
 {
-	if (!write_acpi_int(ls_switch_handle, NULL, value, NULL))
+	if (write_acpi_int(ls_switch_handle, NULL, value, NULL))
 		printk(ASUS_WARNING "Error setting light sensor switch\n");
 	hotk->light_switch = value;
 }
@@ -673,7 +679,7 @@
 
 static void set_light_sens_level(int value)
 {
-	if (!write_acpi_int(ls_level_handle, NULL, value, NULL))
+	if (write_acpi_int(ls_level_handle, NULL, value, NULL))
 		printk(ASUS_WARNING "Error setting light sensor level\n");
 	hotk->light_level = value;
 }
@@ -861,7 +867,7 @@
 		printk(ASUS_WARNING "Couldn't get the DSDT table header\n");
 
 	/* We have to write 0 on init this far for all ASUS models */
-	if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
+	if (write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
 		printk(ASUS_ERR "Hotkey initialization failed\n");
 		return -ENODEV;
 	}
-
Quoted 4 lines

To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/