Skip to contentSkip to conversation

Print which shared library/executable faulted in segfault etc. messages v3

PATCH In review Andi Kleen 2 participants 3 messages Jan 16, 2008 – Jan 17, 2008

Subsystems (4)
lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

PATCH 1/1 Print which shared library/executable faulted in segfault etc. messages v3

The previously posted version was missing all the 64bit hunks. Fix that. Please use over previous version.

-Andi

---

They now look like

hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]

This makes it easier to pinpoint bugs to specific libraries.

And printing the offset into a mapping also always allows to find the correct fault point in a library even with randomized mappings. Previously there was no way to actually find the correct code address inside the randomized mapping.

Relies on earlier patch to shorten the printk formats.

They are often now longer than 80 characters, but I think that's worth it.

Patch for i386 and x86-64.

[includes fix from Eric Dumazet to check d_path error value]
v3: readd 64bit hunks that got dropped somewhere on the way

---
 arch/x86/kernel/signal_32.c |    7 +++++--
 arch/x86/kernel/signal_64.c |    7 +++++--
 arch/x86/kernel/traps_32.c  |    7 +++++--
 arch/x86/mm/fault_32.c      |    4 +++-
 include/linux/mm.h          |    1 +
 mm/memory.c                 |   31 +++++++++++++++++++++++++++++++
 6 files changed, 50 insertions(+), 7 deletions(-)
include/linux/mm.h +1 -0
Index: linux/include/linux/mm.h
===================================================================
@@ -1145,6 +1145,7 @@ extern int randomize_va_space;
 #endif
 
 const char * arch_vma_name(struct vm_area_struct *vma);
+void print_vma_addr(char *prefix, unsigned long rip);
 
 struct page *sparse_mem_map_populate(unsigned long pnum, int nid);
 pgd_t *vmemmap_pgd_populate(unsigned long addr, int node);
mm/memory.c +31 -0
Index: linux/mm/memory.c
===================================================================
@@ -2746,3 +2746,34 @@ int access_process_vm(struct task_struct
 
 	return buf - old_buf;
 }
+
+/*
+ * Print the name of a VMA.
+ */
+void print_vma_addr(char *prefix, unsigned long ip)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, ip);
+	if (vma && vma->vm_file) {
+		struct file *f = vma->vm_file;
+		char *buf = (char *)__get_free_page(GFP_KERNEL);
+		if (buf) {
+			char *p, *s;
+
+			p = d_path(f->f_dentry, f->f_vfsmnt, buf, PAGE_SIZE);
+			if (IS_ERR(p))
+				p = "?";
+			s = strrchr(p, '/');
+			if (s)
+				p = s+1;
+			printk("%s%s[%lx+%lx]", prefix, p,
+					vma->vm_start,
+					vma->vm_end - vma->vm_start);
+			free_page((unsigned long)buf);
+		}
+	}
+	up_read(&current->mm->mmap_sem);
+}
arch/x86/kernel/signal_32.c +5 -2
Index: linux/arch/x86/kernel/signal_32.c
===================================================================
@@ -198,12 +198,15 @@ asmlinkage int sys_sigreturn(unsigned lo
 	return ax;
 
 badframe:
-	if (show_unhandled_signals && printk_ratelimit())
+	if (show_unhandled_signals && printk_ratelimit()) {
 		printk("%s%s[%d] bad frame in sigreturn frame:%p ip:%lx"
-		       " sp:%lx oeax:%lx\n",
+		       " sp:%lx oeax:%lx",
 		    task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
 		    current->comm, task_pid_nr(current), frame, regs->ip,
 		    regs->sp, regs->orig_ax);
+		print_vma_addr(" in ", regs->ip);
+		printk("\n");
+	}
 
 	force_sig(SIGSEGV, current);
 	return 0;
arch/x86/kernel/signal_64.c +5 -2
Index: linux/arch/x86/kernel/signal_64.c
===================================================================
@@ -481,9 +481,12 @@ do_notify_resume(struct pt_regs *regs, v
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
 { 
 	struct task_struct *me = current; 
-	if (show_unhandled_signals && printk_ratelimit())
-		printk("%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx\n",
+	if (show_unhandled_signals && printk_ratelimit()) {
+		printk("%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
 	       me->comm,me->pid,where,frame,regs->ip,regs->sp,regs->orig_ax);
+		print_vma_addr(" in ", regs->ip);
+		printk("\n");
+	}
 
 	force_sig(SIGSEGV, me); 
 } 
arch/x86/kernel/traps_32.c +5 -2
Index: linux/arch/x86/kernel/traps_32.c
===================================================================
@@ -608,11 +608,14 @@ void __kprobes do_general_protection(str
 	current->thread.error_code = error_code;
 	current->thread.trap_no = 13;
 	if (show_unhandled_signals && unhandled_signal(current, SIGSEGV) &&
-	    printk_ratelimit())
+	    printk_ratelimit()) {
 		printk(KERN_INFO
-		    "%s[%d] general protection ip:%lx sp:%lx error:%lx\n",
+		    "%s[%d] general protection ip:%lx sp:%lx error:%lx",
 		    current->comm, task_pid_nr(current),
 		    regs->ip, regs->sp, error_code);
+		print_vma_addr(" in ", regs->ip);
+		printk("\n");
+	}
 
 	force_sig(SIGSEGV, current);
 	return;
arch/x86/mm/fault_32.c +3 -1
Index: linux/arch/x86/mm/fault_32.c
===================================================================
@@ -518,11 +518,13 @@ bad_area_nosemaphore:
 #ifdef CONFIG_X86_32
 			"%s%s[%d]: segfault at %lx ip %08lx sp %08lx error %lx\n",
 #else
-			"%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx\n",
+			"%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx",
 #endif
 			task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
 			tsk->comm, task_pid_nr(tsk), address, regs->ip,
 			regs->sp, error_code);
+			print_vma_addr(" in ", regs->ip);
+			printk("\n");
 		}
 		tsk->thread.cr2 = address;
 		/* Kernel addresses are always protection faults */
arch/x86/kernel/traps_64.c +10 -4
Index: linux/arch/x86/kernel/traps_64.c
===================================================================
@@ -647,11 +647,14 @@ static void __kprobes do_trap(int trapnr
 		tsk->thread.trap_no = trapnr;
 
 		if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
-		    printk_ratelimit())
+		    printk_ratelimit()) {
 			printk(KERN_INFO
-			       "%s[%d] trap %s ip:%lx sp:%lx error:%lx\n",
+			       "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
 			       tsk->comm, tsk->pid, str,
 			       regs->ip, regs->sp, error_code);
+			print_vma_addr(" in ", regs->ip);
+			printk("\n");
+		}
 
 		if (info)
 			force_sig_info(signr, info, tsk);
@@ -745,11 +748,14 @@ asmlinkage void __kprobes do_general_pro
 		tsk->thread.trap_no = 13;
 
 		if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
-		    printk_ratelimit())
+		    printk_ratelimit()) {
 			printk(KERN_INFO
-		       "%s[%d] general protection ip:%lx sp:%lx error:%lx\n",
+		       "%s[%d] general protection ip:%lx sp:%lx error:%lx",
 			       tsk->comm, tsk->pid,
 			       regs->ip, regs->sp, error_code);
+			print_vma_addr(" in ", regs->ip);
+			printk("\n");
+		}
 
 		force_sig(SIGSEGV, tsk);
 		return;
arch/x86/mm/fault_64.c +3 -1
Index: linux/arch/x86/mm/fault_64.c
===================================================================
@@ -556,11 +556,13 @@ bad_area_nosemaphore:
 #ifdef CONFIG_X86_32
 			"%s%s[%d]: segfault at %08lx ip %08lx sp %08lx error %lx\n",
 #else
-			"%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx\n",
+			"%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx",
 #endif
 			task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
 			tsk->comm, task_pid_nr(tsk), address, regs->ip,
 			regs->sp, error_code);
+			print_vma_addr(" in ", regs->ip);
+			printk("\n");
 		}
 
 		tsk->thread.cr2 = address;
#1 lore raw
Quoted 8 lines · Andi Kleen

The previously posted version was missing all the 64bit hunks. Fix that. Please use over previous version.

They now look like

hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]

Can this also be done for executables?

Quoted 1 line

This makes it easier to pinpoint bugs to specific libraries.

[But it may very well mean improper usage (e.g. passing NULL where NULL is definitely not expected) on behalf of the library user ;-)]

Quoted 4 lines

And printing the offset into a mapping also always allows to find the correct fault point in a library even with randomized mappings. Previously there was no way to actually find the correct code address inside the randomized mapping.

Previously, one had to ptrace the process, wait for the crash to happen, then inspect /proc/XXX/maps and calculate the address. It's not like developers were left in the dark with random mappings.

author
#2 lore raw
Quoted 5 lines
Quoted 3 lines

hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]

Can this also be done for executables?

This is done for executables.

-Andi