ppc_4xx resubmit: netstal/common define routines used by all boards

new file mode 100644
index 0000000..65b297f
@@ -0,0 +1,106 @@
+/*
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
+ *    Niklaus Giger (Niklaus.Giger at netstal.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include  <ppc4xx.h>
+#include  <asm/processor.h>
+#include  "nm.h"
+
+#if defined(DEBUG)
+void show_sdram_registers(void)
+{
+	u32 value;
+
+	printf("SDRAM Controller Registers --\n");
+	mfsdram(mem_mcopt1, value);
+	printf("    SDRAM0_CFG   : 0x%08x\n", value);
+	mfsdram(mem_status, value);
+	printf("    SDRAM0_STATUS: 0x%08x\n", value);
+	mfsdram(mem_mb0cf, value);
+	printf("    SDRAM0_B0CR  : 0x%08x\n", value);
+	mfsdram(mem_mb1cf, value);
+	printf("    SDRAM0_B1CR  : 0x%08x\n", value);
+	mfsdram(mem_sdtr1, value);
+	printf("    SDRAM0_TR    : 0x%08x\n", value);
+	mfsdram(mem_rtr, value);
+	printf("    SDRAM0_RTR   : 0x%08x\n", value);
+}
+#endif
+
+long int fixed_hcu4_sdram (unsigned int dram_size)
+{
+#ifdef DEBUG
+	printf(__FUNCTION__);
+#endif
+	/* disable memory controller */
+	mtsdram(mem_mcopt1, 0x00000000);
+
+	udelay (500);
+
+	/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
+	mtsdram(mem_besra, 0xffffffff);
+
+	/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
+	mtsdram(mem_besrb, 0xffffffff);
+
+	/* Clear SDRAM0_ECCCFG (disable ECC) */
+	mtsdram(mem_ecccf, 0x00000000);
+
+	/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
+	mtsdram(mem_eccerr, 0xffffffff);
+
+	/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
+	 */
+	mtsdram(mem_sdtr1, 0x008a4015);
+
+	/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
+	 * and refresh timer
+	 */
+	switch (dram_size >> 20) {
+	case 32:
+		mtsdram(mem_mb0cf, 0x00062001);
+		mtsdram(mem_rtr,   0x07F00000);
+		break;
+	case 64:
+		mtsdram(mem_mb0cf, 0x00084001);
+		mtsdram(mem_rtr,   0x04100000);
+		break;
+	case 128:
+		mtsdram(mem_mb0cf, 0x000A4001);
+		mtsdram(mem_rtr,   0x04100000);
+		break;
+	default:
+		printf("Some error here...\n");
+	}
+
+	/* Power management idle timer set to the default. */
+	mtsdram(mem_pmit, 0x07c00000);
+
+	udelay (500);
+
+	/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
+	mtsdram(mem_mcopt1, 0x90800000);
+
+#ifdef DEBUG
+	printf("%s: done\n", __FUNCTION__);
+#endif
+	return dram_size;
+}
+

new file mode 100644
index 0000000..7e59390
@@ -0,0 +1,40 @@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *    Niklaus Giger (Niklaus.Giger at netstal.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+extern void hcu_led_set(u32 value);
+extern u32 get_serial_number(void);
+extern u32 hcu_get_slot(void);
+extern int board_with_pci(void);
+extern void nm_show_print(int generation, int index, int hw_capabilities);
+extern void set_params_for_sw_install(int install_requested, char *board_name );
+extern void common_misc_init_r(void);
+
+enum {
+	/* HW_GENERATION_HCU1 is no longer supported */
+	HW_GENERATION_HCU2  = 0x10,
+	HW_GENERATION_HCU3  = 0x10,
+	HW_GENERATION_HCU4  = 0x20,
+	HW_GENERATION_HCU5  = 0x30,
+	HW_GENERATION_MCU   = 0x08,
+	HW_GENERATION_MCU20 = 0x0a,
+	HW_GENERATION_MCU25 = 0x09,
+};
+
+

139 lines not on this page · raw message