Skip to contentSkip to conversation

ppc_4xx resubmit: Netstal HCU5 board: added various fixes and POST

PATCH New Niklaus Giger 2 participants 7 messages Jan 16, 2008 – Jan 17, 2008

lore
Share & tools
lore

Niklaus Giger

author
#0 lore raw

PATCH 1/1 ppc_4xx resubmit: Netstal HCU5 board: added various fixes and POST

- Moved some common code to nestal/common/nm_bsp.c.
- Added support for the vxWorks EDR.
- Enable trace for Lauterbach, if present.
- Added support for POST.
- Stylistic cleanups (multi-line comments/ enforce 80 colomn width)

Signed-off-by Niklaus Giger <[email protected]>
---
 board/netstal/hcu5/Makefile   |    3 +-
 board/netstal/hcu5/README.txt |    3 -
 board/netstal/hcu5/hcu5.c     |  292 +++++++++++++++++------------------------
 board/netstal/hcu5/init.S     |   71 +++++++---
 board/netstal/hcu5/sdram.c    |   74 +++++------
 5 files changed, 207 insertions(+), 236 deletions(-)
board/netstal/hcu5/Makefile +2 -1
index 27398b9..9645e45 100644
@@ -23,9 +23,10 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 
 vpath hcu_flash.c ../common
+vpath nm_bsp.c ../common
 
 # NOBJS : Netstal common objects
-NOBJS	= hcu_flash.o
+NOBJS	= hcu_flash.o nm_bsp.o
 COBJS	= $(BOARD).o sdram.o
 SOBJS	= init.o
board/netstal/hcu5/README.txt +0 -3
index 3118da9..c205108 100644
@@ -10,9 +10,6 @@ TODO:
 - Fix RTS/CTS problem (HW?)
   CONFIG_SERIAL_MULTI/CONFIG_SERIAL_SOFTWARE_FIFO hangs after
   Switching to interrupt driven serial input mode
-- Make vxWorks start from u-boot. Possible reasons
-    - Does vxWorks need an entry for the Machine Check interrupt like this
-      tlbentry( 0x40000000, SZ_256M, 0, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) ?
 
 Caveats:
 --------
board/netstal/hcu5/hcu5.c +122 -170

490 lines not on this page · raw message

board/netstal/hcu5/init.S +49 -22

90 lines not on this page · raw message

board/netstal/hcu5/sdram.c +34 -40

140 lines not on this page · raw message

Signature · 1 line
1.5.2.5
author
#1 lore raw

PATCH 1/1 ppc_4xx resubmit: netstal/common define routines used by all boards

Added some routines used by all Netstal boards:
- nm_bsp.c: - nm_show_print and
- common_misc_init_r
- set_params_for_sw_install. Bery specific code to handle our SW installation procedure
- fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards to handle sdram initialization.
- nm.h: Common header

Signed-off-by Niklaus Giger <[email protected]>
---
 board/netstal/common/fixed_sdram.c |  107 +++++++++++++++++++++++++++++
 board/netstal/common/nm.h          |   40 +++++++++++
 board/netstal/common/nm_bsp.c      |  131 +++++++++++++++++++++++++++++++-----
 3 files changed, 262 insertions(+), 16 deletions(-)
 create mode 100644 board/netstal/common/fixed_sdram.c
 create mode 100644 board/netstal/common/nm.h
board/netstal/common/fixed_sdram.c new file +107 -0
new file mode 100644
index 0000000..f6e4b5a
@@ -0,0 +1,107 @@
+/*
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
+ *    Niklaus Giger (Niklaus.Giger at netstal.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include  <ppc4xx.h>
+#include  <asm/processor.h>
+#include  "nm.h"
+
+#if defined(DEBUG)
+void show_sdram_registers(void)
+{
+	u32 value;
+
+	printf ("SDRAM Controller Registers --\n");
+	mfsdram(mem_mcopt1, value);
+	printf ("    SDRAM0_CFG   : 0x%08x\n", value);
+	mfsdram(mem_status, value);
+	printf ("    SDRAM0_STATUS: 0x%08x\n", value);
+	mfsdram(mem_mb0cf, value);
+	printf ("    SDRAM0_B0CR  : 0x%08x\n", value);
+	mfsdram(mem_mb1cf, value);
+	printf ("    SDRAM0_B1CR  : 0x%08x\n", value);
+	mfsdram(mem_sdtr1, value);
+	printf ("    SDRAM0_TR    : 0x%08x\n", value);
+	mfsdram(mem_rtr, value);
+	printf ("    SDRAM0_RTR   : 0x%08x\n", value);
+}
+#endif
+
+long int fixed_hcu4_sdram (unsigned int dram_size)
+{
+#ifdef DEBUG
+	printf (__FUNCTION__);
+#endif
+	/* disable memory controller */
+	mtdcr (memcfga, mem_mcopt1);
+	mtdcr (memcfgd, 0x00000000);
+
+	udelay (500);
+
+	/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
+	mtdcr (memcfga, mem_besra);
+	mtdcr (memcfgd, 0xffffffff);
+
+	/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
+	mtdcr (memcfga, mem_besrb);
+	mtdcr (memcfgd, 0xffffffff);
+
+	/* Clear SDRAM0_ECCCFG (disable ECC) */
+	mtdcr (memcfga, mem_ecccf);
+	mtdcr (memcfgd, 0x00000000);
+
+	/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
+	mtdcr (memcfga, mem_eccerr);
+	mtdcr (memcfgd, 0xffffffff);
+
+	/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
+	 */
+	mtdcr (memcfga, mem_sdtr1);
+	mtdcr (memcfgd, 0x008a4015);
+
+	/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
+	 */
+	mtdcr (memcfga, mem_mb0cf);
+	if(dram_size ==  32*1024*1024) { mtdcr (memcfgd, 0x00062001); }
+	if(dram_size ==  64*1024*1024) { mtdcr (memcfgd, 0x00084001); }
+	if(dram_size == 128*1024*1024) { mtdcr (memcfgd, 0x000A4001); }
+
+	/* refresh timer = 0x400  */
+	mtdcr (memcfga, mem_rtr);
+	if(dram_size ==  32*1024*1024) { mtdcr (memcfgd, 0x07F00000); }
+	if(dram_size ==  64*1024*1024) { mtdcr (memcfgd, 0x04100000); }
+	if(dram_size == 128*1024*1024) { mtdcr (memcfgd, 0x04100000); }
+
+	/* Power management idle timer set to the default. */
+	mtdcr (memcfga, mem_pmit);
+	mtdcr (memcfgd, 0x07c00000);
+
+	udelay (500);
+
+	/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
+	mtdcr (memcfga, mem_mcopt1);
+	mtdcr (memcfgd, 0x90800000);
+
+#ifdef DEBUG
+	printf ("%s: done\n", __FUNCTION__);
+#endif
+	return dram_size;
+}
+
board/netstal/common/nm.h new file +40 -0
new file mode 100644
index 0000000..7e59390
@@ -0,0 +1,40 @@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *    Niklaus Giger (Niklaus.Giger at netstal.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+extern void hcu_led_set(u32 value);
+extern u32 get_serial_number(void);
+extern u32 hcu_get_slot(void);
+extern int board_with_pci(void);
+extern void nm_show_print(int generation, int index, int hw_capabilities);
+extern void set_params_for_sw_install(int install_requested, char *board_name );
+extern void common_misc_init_r(void);
+
+enum {
+	/* HW_GENERATION_HCU1 is no longer supported */
+	HW_GENERATION_HCU2  = 0x10,
+	HW_GENERATION_HCU3  = 0x10,
+	HW_GENERATION_HCU4  = 0x20,
+	HW_GENERATION_HCU5  = 0x30,
+	HW_GENERATION_MCU   = 0x08,
+	HW_GENERATION_MCU20 = 0x0a,
+	HW_GENERATION_MCU25 = 0x09,
+};
+
+
board/netstal/common/nm_bsp.c +115 -16

142 lines not on this page · raw message

Signature · 1 line
1.5.2.5
author
#2 lore raw

PATCH 1/1 ppc_4xx: Netstal HCU4 board: added various fixes and POST

- Moved some common code to netstal/common/nm_bsp.c.
- sdram initialisation goes go netstal/common/fixed_sdram.c.
- Added support for POST.
- Stylistic cleanups (multi-line comments/ enforce 80 colomn width)

Signed-off-by Niklaus Giger <[email protected]>
---
 board/netstal/hcu4/Makefile |    4 +-
 board/netstal/hcu4/hcu4.c   |  340 ++++++++++---------------------------------
 2 files changed, 77 insertions(+), 267 deletions(-)
board/netstal/hcu4/Makefile +3 -1
index af90821..c0d719f 100644
@@ -22,10 +22,12 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
+vpath fixed_sdram.c ../common
 vpath hcu_flash.c ../common
+vpath nm_bsp.c ../common
 
 # NOBJS : Netstal common objects
-NOBJS	= hcu_flash.o
+NOBJS	= fixed_sdram.o hcu_flash.o nm_bsp.o
 COBJS	= $(BOARD).o
 SOBJS	=
board/netstal/hcu4/hcu4.c +74 -266

423 lines not on this page · raw message

Signature · 1 line
1.5.2.5
Applied
#3 lore raw

PATCH 1/1 ppc_4xx: Netstal HCU4 board: added various fixes and POST

Quoted 6 lines · Niklaus Giger

- Moved some common code to netstal/common/nm_bsp.c.
- sdram initialisation goes go netstal/common/fixed_sdram.c.
- Added support for POST.
- Stylistic cleanups (multi-line comments/ enforce 80 colomn width)

Signed-off-by Niklaus Giger <[email protected]>

Applied, thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================

#4 lore raw

PATCH 1/1 ppc_4xx resubmit: netstal/common define routines used by all boards

In reply to Niklaus Giger
Quoted 8 lines · Niklaus Giger

Added some routines used by all Netstal boards:
- nm_bsp.c: - nm_show_print and
- common_misc_init_r
- set_params_for_sw_install. Bery specific code to handle our SW installation procedure
- fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards to handle sdram initialization.
- nm.h: Common header

Please find some comments below.

Quoted 37 lines
Signed-off-by Niklaus Giger <[email protected]>
---
 board/netstal/common/fixed_sdram.c |  107 +++++++++++++++++++++++++++++
 board/netstal/common/nm.h          |   40 +++++++++++
 board/netstal/common/nm_bsp.c      |  131 +++++++++++++++++++++++++++++++-----
 3 files changed, 262 insertions(+), 16 deletions(-)
 create mode 100644 board/netstal/common/fixed_sdram.c
 create mode 100644 board/netstal/common/nm.h
board/netstal/common/fixed_sdram.c new file +22 -0
new file mode 100644
index 0000000..f6e4b5a
@@ -0,0 +1,107 @@
+/*
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
+ *    Niklaus Giger (Niklaus.Giger at netstal.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include  <ppc4xx.h>

board/netstal/common/fixed_sdram.c line 32

Quoted 10 lines
board/netstal/common/fixed_sdram.c new file +10 -0
+#include  <asm/processor.h>
+#include  "nm.h"
+
+#if defined(DEBUG)
+void show_sdram_registers(void)
+{
+	u32 value;
+
+	printf ("SDRAM Controller Registers --\n");
+	mfsdram(mem_mcopt1, value);

You are mixing two programming styles here. func () and func(). Please only use one style in one source file.

Quoted 9 lines
board/netstal/common/fixed_sdram.c new file +9 -0
+	printf ("    SDRAM0_CFG   : 0x%08x\n", value);
+	mfsdram(mem_status, value);
+	printf ("    SDRAM0_STATUS: 0x%08x\n", value);
+	mfsdram(mem_mb0cf, value);
+	printf ("    SDRAM0_B0CR  : 0x%08x\n", value);
+	mfsdram(mem_mb1cf, value);
+	printf ("    SDRAM0_B1CR  : 0x%08x\n", value);
+	mfsdram(mem_sdtr1, value);
+	printf ("    SDRAM0_TR    : 0x%08x\n", value);

board/netstal/common/fixed_sdram.c line 51

Quoted 10 lines
board/netstal/common/fixed_sdram.c new file +10 -0
+	mfsdram(mem_rtr, value);
+	printf ("    SDRAM0_RTR   : 0x%08x\n", value);
+}
+#endif
+
+long int fixed_hcu4_sdram (unsigned int dram_size)
+{
+#ifdef DEBUG
+	printf (__FUNCTION__);
+#endif

	debug(__FUNCTION__);

board/netstal/common/fixed_sdram.c line 54

Quoted 3 lines
board/netstal/common/fixed_sdram.c new file +3 -0
+	/* disable memory controller */
+	mtdcr (memcfga, mem_mcopt1);
+	mtdcr (memcfgd, 0x00000000);

	mtsdram(mem_mcopt1, 0x00000000);

board/netstal/common/fixed_sdram.c line 60

Quoted 5 lines
board/netstal/common/fixed_sdram.c new file +5 -0
+	udelay (500);
+
+	/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
+	mtdcr (memcfga, mem_besra);
+	mtdcr (memcfgd, 0xffffffff);

Please use the mtsdram/mfsdram everywhere in this file.

Quoted 13 lines
board/netstal/common/fixed_sdram.c new file +13 -0
+	/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
+	mtdcr (memcfga, mem_besrb);
+	mtdcr (memcfgd, 0xffffffff);
+
+	/* Clear SDRAM0_ECCCFG (disable ECC) */
+	mtdcr (memcfga, mem_ecccf);
+	mtdcr (memcfgd, 0x00000000);
+
+	/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
+	mtdcr (memcfga, mem_eccerr);
+	mtdcr (memcfgd, 0xffffffff);
+
+	/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2

board/netstal/common/fixed_sdram.c line 84

Quoted 10 lines
board/netstal/common/fixed_sdram.c new file +10 -0
+	 */
+	mtdcr (memcfga, mem_sdtr1);
+	mtdcr (memcfgd, 0x008a4015);
+
+	/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
+	 */
+	mtdcr (memcfga, mem_mb0cf);
+	if(dram_size ==  32*1024*1024) { mtdcr (memcfgd, 0x00062001); }
+	if(dram_size ==  64*1024*1024) { mtdcr (memcfgd, 0x00084001); }
+	if(dram_size == 128*1024*1024) { mtdcr (memcfgd, 0x000A4001); }

Multiple problems in this one. Why not:

	switch (dram_size >> 20) {
	case 32:
		mtsdram(mem_mb0cf, 0x00062001);
		break;
	case 64:
		mtsdram(mem_mb0cf, 0x00084001);
		break;
	case 128:
		mtsdram(mem_mb0cf, 0x000A4001);
		break;
	default:
		printf("Some error here...\n");
	}

board/netstal/common/fixed_sdram.c line 90

Quoted 5 lines
board/netstal/common/fixed_sdram.c new file +5 -0
+	/* refresh timer = 0x400  */
+	mtdcr (memcfga, mem_rtr);
+	if(dram_size ==  32*1024*1024) { mtdcr (memcfgd, 0x07F00000); }
+	if(dram_size ==  64*1024*1024) { mtdcr (memcfgd, 0x04100000); }
+	if(dram_size == 128*1024*1024) { mtdcr (memcfgd, 0x04100000); }

Again.

Quoted 83 lines
board/netstal/common/fixed_sdram.c new file +16 -0
+	/* Power management idle timer set to the default. */
+	mtdcr (memcfga, mem_pmit);
+	mtdcr (memcfgd, 0x07c00000);
+
+	udelay (500);
+
+	/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
+	mtdcr (memcfga, mem_mcopt1);
+	mtdcr (memcfgd, 0x90800000);
+
+#ifdef DEBUG
+	printf ("%s: done\n", __FUNCTION__);
+#endif
+	return dram_size;
+}
+
board/netstal/common/nm.h new file +40 -0
new file mode 100644
index 0000000..7e59390
@@ -0,0 +1,40 @@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *    Niklaus Giger (Niklaus.Giger at netstal.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+extern void hcu_led_set(u32 value);
+extern u32 get_serial_number(void);
+extern u32 hcu_get_slot(void);
+extern int board_with_pci(void);
+extern void nm_show_print(int generation, int index, int hw_capabilities);
+extern void set_params_for_sw_install(int install_requested, char *board_name );
+extern void common_misc_init_r(void);
+
+enum {
+	/* HW_GENERATION_HCU1 is no longer supported */
+	HW_GENERATION_HCU2  = 0x10,
+	HW_GENERATION_HCU3  = 0x10,
+	HW_GENERATION_HCU4  = 0x20,
+	HW_GENERATION_HCU5  = 0x30,
+	HW_GENERATION_MCU   = 0x08,
+	HW_GENERATION_MCU20 = 0x0a,
+	HW_GENERATION_MCU25 = 0x09,
+};
+
+
board/netstal/common/nm_bsp.c +3 -4
index a9de45e..c756ecd 100644
@@ -1,5 +1,5 @@
 /*
- *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
  *    Niklaus Giger (Niklaus.Giger at netstal.com)
  *
  *    This source code is free software; you can redistribute it

@@ -20,22 +20,121 @@
 
 #include <common.h>
 #include <command.h>
+#include <net.h>
+#include "nm.h"
 
-#ifdef CONFIG_CMD_BSP
-/*
- * Command nm_bsp: Netstal Maschinen BSP specific command

board/netstal/common/nm_bsp.c line 33

Quoted 10 lines
board/netstal/common/nm_bsp.c +8 -2
- */
-int nm_bsp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DEFAULT_ETH_ADDR  "ethaddr"
+
+typedef struct {u8	id;	char *name;} generation_info;
+
+generation_info generations[7] =
+{

generation_info generations[7] = {

board/netstal/common/nm_bsp.c line 46

Quoted 13 lines
board/netstal/common/nm_bsp.c +13 -0
+	{HW_GENERATION_HCU2,	"HCU2"},
+	{HW_GENERATION_HCU3,	"HCU3"},
+	{HW_GENERATION_HCU4,	"HCU4"},
+	{HW_GENERATION_HCU5,	"HCU5"},
+	{HW_GENERATION_MCU,	"MCU"},
+	{HW_GENERATION_MCU20,	"MCU20"},
+	{HW_GENERATION_MCU25,	"MCU25"},
+};
+
+void nm_show_print(int generation, int index, int hw_capabilities)
+{
+	int j;
+	char *generationName=0;

	char *generationName = 0;

board/netstal/common/nm_bsp.c line 51

Quoted 5 lines
board/netstal/common/nm_bsp.c +5 -0
+
+	/* reset ANSI terminal color mode */
+	printf("\x1B""[0m""Netstal Maschinen AG: ");
+	for (j=0; j < (sizeof(generations)/sizeof(generations[0])); j++)
+	{

	for (j=0; j < (sizeof(generations)/sizeof(generations[0])); j++) {

or even:

	for (j=0; j < ARRAY_SIZE(generations); j++) {

board/netstal/common/nm_bsp.c line 53

Quoted 2 lines
board/netstal/common/nm_bsp.c +2 -0
+		if (generations[j].id == generation)
+		{

		if (generations[j].id == generation) {

Please fix and re-submit.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================

Applied
#5 lore raw

PATCH 1/1 ppc_4xx resubmit: netstal/common define routines used by all boards

In reply to Niklaus Giger
Quoted 10 lines · Niklaus Giger

Added some routines used by all Netstal boards:
- nm_bsp.c: - nm_show_print and
- common_misc_init_r
- set_params_for_sw_install. Bery specific code to handle our SW installation procedure
- fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards to handle sdram initialization.
- nm.h: Common header

Signed-off-by Niklaus Giger <[email protected]>

Applied, thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================

Applied
#6 lore raw

PATCH 1/1 ppc_4xx resubmit: Netstal HCU5 board: added various fixes and POST

In reply to Niklaus Giger
Quoted 7 lines · Niklaus Giger

- Moved some common code to nestal/common/nm_bsp.c.
- Added support for the vxWorks EDR.
- Enable trace for Lauterbach, if present.
- Added support for POST.
- Stylistic cleanups (multi-line comments/ enforce 80 colomn width)

Signed-off-by Niklaus Giger <[email protected]>

Applied, thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================