dmidecode 2.9
# dmidecode 2.9 SMBIOS 2.4 present. 29 structures occupying 1046 bytes. Table at 0x000DC010.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies LTD
Version: 00YJ
Release Date: 08/03/2007
Address: 0xE4F40
Runtime Size: 110784 bytes
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes System Information
Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: R59P/R60P/R61P
Version: 00YJ
Serial Number: 012Z93FP904750
UUID: C0974B31-D21D-B211-8000-FF06B87D96A9 Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: SAMSUNG ELECTRONICS CO., LTD. Product Name: R59P/R60P/R61P Version:
Serial Number: 123490EN400015
Handle 0x0003, DMI type 3, 17 bytes Chassis Information
Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
Type: Other
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 35 bytes Processor Information
Socket Designation: U2E1
Type: Central Processor
Family: <OUT OF SPEC>
Manufacturer: Intel
ID: FD 06 00 00 FF FB EB BF
Version: A0
Voltage: 3.3 V
External Clock: Unknown
Max Speed: 4096 MHz
Current Speed: 1494 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back
Location: Internal
Installed Size: 2048 KB
Maximum Size: 4096 KB
Supported SRAM Types:
Burst
Pipeline Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 9, 13 bytes System Slot Information
Designation: Mini PCIE Card Slot
Type: 32-bit PCI Express Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided Hot-plug devices are supported
Handle 0x0008, DMI type 11, 5 bytes OEM Strings
String 1: BBBBAAAAAAAA String 2: 2008/01
Handle 0x0009, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x000A, DMI type 16, 15 bytes Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None Maximum Capacity: 1 GB
Error Information Handle: Not Provided Number Of Devices: 2
Handle 0x000B, DMI type 17, 27 bytes Memory Device
Array Handle: 0x000A
Error Information Handle: No Error Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 1
Locator: J400
Bank Locator: Channel A0
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified
Handle 0x000C, DMI type 17, 27 bytes Memory Device
Array Handle: 0x000A
Error Information Handle: No Error Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 3
Locator: J501
Bank Locator: Channel B0
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified
Handle 0x000D, DMI type 18, 23 bytes 32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown
Resolution: Unknown
Handle 0x000E, DMI type 19, 15 bytes Memory Array Mapped Address
Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB
Physical Array Handle: 0x000A Partition Width: 0
Handle 0x000F, DMI type 20, 19 bytes Memory Device Mapped Address
Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x000B Memory Array Mapped Address Handle: 0x000E Partition Row Position: 2 Interleave Position: 1
Interleaved Data Depth: 6
Handle 0x0010, DMI type 21, 7 bytes Built-in Pointing Device
Type: Touch Pad
Interface: PS/2
Buttons: 4
Handle 0x0011, DMI type 22, 26 bytes Portable Battery
Location: Rear
Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
Name: SAMSUNG ELECTRONICS CO., LTD.
Chemistry: Lithium Ion
Design Capacity: 1000 mWh
Design Voltage: 19 mV
SBDS Version: BATT_1234
Maximum Error: Unknown
SBDS Serial Number: 0000
SBDS Manufacture Date: 1980-00-00 OEM-specific Information: 0x00000000
Handle 0x0012, DMI type 23, 13 bytes System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot Boot Option On Limit: Do Not Reboot Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x0013, DMI type 24, 5 bytes Hardware Security
Power-On Password Status: Enabled Keyboard Password Status: Unknown Administrator Password Status: Enabled Front Panel Reset Status: Unknown
Handle 0x0014, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59
Handle 0x0015, DMI type 26, 22 bytes Voltage Probe
Description: Voltage Probe 1
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000 Nominal Value: 8.192 V
Handle 0x0016, DMI type 27, 14 bytes Cooling Device
Temperature Probe Handle: 0x0018
Type: Fan
Status: OK
Cooling Unit Group: 255 OEM-specific Information: 0x00000000 Nominal Speed: Unknown Or Non-rotating
Handle 0x0017, DMI type 27, 12 bytes Cooling Device
Temperature Probe Handle: 0x0018
Type: Fan
Status: OK
Cooling Unit Group: 255 OEM-specific Information: 0x00000000
Handle 0x0018, DMI type 28, 22 bytes Temperature Probe
Description: Temperature Probe 1
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000 Nominal Value: Unknown
Handle 0x0019, DMI type 29, 22 bytes Electrical Current Probe
Description: Electrical Current Probe 1
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000 Nominal Value: Unknown
Handle 0x001A, DMI type 30, 6 bytes Out-of-band Remote Access
Manufacturer Name: Intel Inbound Connection: Enabled Outbound Connection: Disabled
Handle 0x001B, DMI type 32, 20 bytes System Boot Information
Status: <OUT OF SPEC>
Handle 0x001C, DMI type 127, 4 bytes End Of Table
Len Brown
reviewerQuoted 10 lines
System Information
Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
Product Name: R59P/R60P/R61P
Version: 00YJ
Serial Number: 012Z93FP904750
UUID: C0974B31-D21D-B211-8000-FF06B87D96A9
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Does this system run any better or worse when booted with "acpi_osi=Linux"?
Please send me the output from acpidump.
If acpidump is not installed on your machine, you can find it in pmtools here:
http://www.lesswatts.org/projects/acpi/utilities.php
thanks,
-Len
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Len Brown
reviewerRe: dmidecode 2.9 (Samsung R59P/R60P/R61P)
On Monday 21 January 2008 14:54, Stefan Becker wrote:
...
Quoted 7 lines
meanwhile i did some testing. these are some of my observations:
sometimes:
- booting is lightning fast (< 25 seconds)
- booting is dead slow (>> 60 seconds), have to press a key to continue
Quoted 5 lines
always:
- poweroff or reboot not working (no shutdown)
- no problem setting system clock (as opposed to 'select()to/dev/rtcto wait for clock tick timed out' when starting with 'nolapic_timerusbcore autosuspend=1 noapic'
thanks for the acpidump.
Like others, there is no special support for Linux here, but setting OSI(Linux) will disable a bunch of hooks that were put in for Vista.
So we should disable OSI(Linux) on this box unless proof of incompatibility with the Vista BIOS hooks emerges.
thanks
-Len
If (\_OSI ("Windows 2006"))
{
Store (0x40, ^OSTB)
Store (0x40, ^TPOS)
}
If (\_OSI ("Linux"))
{
Store (0x01, LINX) # a no-op
Store (0x80, ^OSTB)
Store (0x80, ^TPOS)
}# OSTB != x40 will change PCI initialization below:
Device (PCI0)
{
Name (_HID, EisaId ("PNP0A08"))
Name (_CID, 0x030AD041)
Name (_ADR, 0x00)
Name (_UID, 0x01)
Name (_BBN, 0x00)
Method (_INI, 0, NotSerialized)
{
If (DTSE)
{
DTSF (0x47)
}
\_SB.OSTP ()
If (LGreaterEqual (TPOS, 0x04))
{
Store (Zero, \_SB.PCI0.SMB.C4C3)
Store (0x49, \_SB.PCI0.LPC0.BCMD)
Store (0x01, \_SB.PCI0.LPC0.DID)
Store (0x00, \_SB.PCI0.LPC0.SMIC)
}
If (LEqual (\_SB.OSTB, 0x40))
{
\_SB.PCI0.LPC0.PHS1 (0xA9, 0x01)
}
Else
{
\_SB.PCI0.LPC0.PHS1 (0xA9, 0x00)
}
}# OSTB != 40 will touch display brightness:
Method (_BCM, 1, NotSerialized)
{
Store (Arg0, BRTL)
If (LGreaterEqual (\_SB.OSTB, 0x40))
{
\_SB.PCI0.LPC0.PHS (0xA6)
}
}# OSTB != 40 touches the RTC:
Device (RTC)
{
Name (_HID, EisaId ("PNP0B00"))
Name (RCB0, ResourceTemplate ()
{
IO (Decode16,
0x0070, // Range Minimum
0x0070, // Range Maximum
0x01, // Alignment
0x02, // Length
)
IRQ (Edge, ActiveHigh, Exclusive, )
{8}
})
Name (RCB1, ResourceTemplate ()
{
IO (Decode16,
0x0070, // Range Minimum
0x0070, // Range Maximum
0x01, // Alignment
0x02, // Length
)
})
Method (_CRS, 0, Serialized)
{
If (LEqual (\_SB.OSTB, 0x40))
{
If (LEqual (\_SB.PCI0.SMB.GHPT (), 0xFED00000))
{
Return (RCB1)
}
}
Return (RCB0)
}
}...
OSTB != 40 will disable the new button hooks:
Device (MBTN)
{
Name (_HID, EisaId ("PNP0C32"))
Name (_UID, 0x01)
Method (_STA, 0, NotSerialized)
{
If (LEqual (\_SB.OSTB, 0x40))
{
Return (0x0F)
}
Else
{
Return (0x00)
}
}
Method (GHID, 0, NotSerialized)
{
If (DMED)
{
Notify (MBTN, 0x02)
}
Return (Buffer (0x01)
{
0x01
})
}
}...
OSTB != x40 changes _WAK
If (LEqual (\_SB.OSTB, 0x40))
{
Store (\_SB.PCI0.LPC0.PHS1 (0xAA, 0x00), Local1)
If (Local1)
{
Notify (\_SB.PCI0.LPC0.H_EC.MBTN, 0x02)
}
}
If (LEqual (\_SB.OSTB, 0x40))
{
\_SB.PCI0.LPC0.PHS1 (0xA9, 0x01)
}
Else
{
\_SB.PCI0.LPC0.PHS1 (0xA9, 0x00)
}# TPOS != 40 changes SATA:
Method (_PS0, 0, NotSerialized)
{
GBAA ()
If (LAnd (LOr (LEqual (TPOS, 0x40), LEqual (TPOS, 0x04)), \_SB.PCI0.SATA.B5EN))
{
If (\_SB.PCI0.SATA.PMS1)
{
Store (0x32, Local0)
While (LAnd (LEqual (\_SB.PCI0.SATA.PMBY, 0x01), Local0))
{
Sleep (0xFA)
Decrement (Local0)
}
}
If (\_SB.PCI0.SATA.PSS1)
{
Store (0x32, Local0)
While (LAnd (LEqual (\_SB.PCI0.SATA.PSBY, 0x01), Local0))
{
Sleep (0xFA)
Decrement (Local0)
}
}
}
Store (0x00, PRIS)
}