enable SMC911X for ARCH_MX3

PATCH New Daniel Mack 1 participant 1 message Jan 29, 2008

Subsystems (2)

Networking Network drivers

lore

Share & tools

lore

Daniel Mack

author

2008-01-29 22:08 UTC #0 lore raw

PATCH 1/1 enable SMC911X for ARCH_MX3

Hi,

this patch enables SMX911X support for Freescale's MX3 platforms.

Signed-off-by Daniel Mack <[email protected]>

drivers/net/Kconfig +1 -1

index 6cde4ed..1011735 100644
@@ -926,7 +926,7 @@ config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
 	select MII
-	depends on ARCH_PXA || SH_MAGIC_PANEL_R2
+	depends on ARCH_PXA || ARCH_MX3 || SH_MAGIC_PANEL_R2
 	help
 	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.

drivers/net/smc911x.h +5 -0

index d04e4fa..2278408 100644
@@ -37,6 +37,11 @@
   #define SMC_USE_16BIT		0
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_FALLING
+#elif defined(CONFIG_ARCH_MX3)
+  #define SMC_USE_PXA_DMA	0
+  #define SMC_USE_16BIT		0
+  #define SMC_USE_32BIT		1
+  #define SMC_IRQ_SENSE		IRQF_TRIGGER_FALLING
 #elif defined(CONFIG_SH_MAGIC_PANEL_R2)
   #define SMC_USE_SH_DMA	0
   #define SMC_USE_16BIT		0