Skip to contentSkip to conversation

sm501fb: control panel pin usage with platform data flags

PATCH RESEND In review Magnus Damm 2 participants 2 messages Jan 21, 2008 – Jan 30, 2008 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 sm501fb: control panel pin usage with platform data flags

sm501fb: control panel pin usage with platform data flags

This patch makes it possible to control panel pins usage with flags passed from the platform data. Without this patch the sm501fb driver always controls the VBIASEN and FPEN pins. The polarity and use of these pins are very platform specific, so this patch introduces the flags SM501FB_FLAG_PANEL_USE_VBIASEN and SM501FB_FLAG_PANEL_USE_FPEN which enable the use of these pins.

This patch is needed to support the a Sharp LQ104V1DG21 lcd panel on SuperH platforms such as R2D-1 and R2D-PLUS boards. Letting the sm501fb driver control the FPEN and VBIASEN pins like today just results in lcd panel flicker.

---

This is the same patch that was sent to linux-fbdev-devel on 20071228.

 drivers/video/sm501fb.c |   41 +++++++++++++++++++++++++----------------
 include/linux/sm501.h   |    2 ++
 2 files changed, 27 insertions(+), 16 deletions(-)
drivers/video/sm501fb.c +25 -16
@@ -639,6 +639,7 @@ static void sm501fb_panel_power(struct s
 {
 	unsigned long control;
 	void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL;
+	struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl;
 
 	control = readl(ctrl_reg);
 
@@ -655,26 +656,34 @@ static void sm501fb_panel_power(struct s
 		sm501fb_sync_regs(fbi);
 		mdelay(10);
 
-		control |= SM501_DC_PANEL_CONTROL_BIAS;	/* VBIASEN */
-		writel(control, ctrl_reg);
-		sm501fb_sync_regs(fbi);
-		mdelay(10);
-
-		control |= SM501_DC_PANEL_CONTROL_FPEN;
-		writel(control, ctrl_reg);
+		if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+			control |= SM501_DC_PANEL_CONTROL_BIAS;	/* VBIASEN */
+			writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
 
+		if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+			control |= SM501_DC_PANEL_CONTROL_FPEN;
+			writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
 	} else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
 		/* disable panel power */
+		if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+			control &= ~SM501_DC_PANEL_CONTROL_FPEN;
+			writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
 
-		control &= ~SM501_DC_PANEL_CONTROL_FPEN;
-		writel(control, ctrl_reg);
-		sm501fb_sync_regs(fbi);
-		mdelay(10);
-
-		control &= ~SM501_DC_PANEL_CONTROL_BIAS;
-		writel(control, ctrl_reg);
-		sm501fb_sync_regs(fbi);
-		mdelay(10);
+		if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+			control &= ~SM501_DC_PANEL_CONTROL_BIAS;
+			writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
 
 		control &= ~SM501_DC_PANEL_CONTROL_DATA;
 		writel(control, ctrl_reg);
include/linux/sm501.h +2 -0
@@ -70,6 +70,8 @@ extern unsigned long sm501_gpio_get(stru
 #define SM501FB_FLAG_DISABLE_AT_EXIT	(1<<1)
 #define SM501FB_FLAG_USE_HWCURSOR	(1<<2)
 #define SM501FB_FLAG_USE_HWACCEL	(1<<3)
+#define SM501FB_FLAG_PANEL_USE_FPEN	(1<<4)
+#define SM501FB_FLAG_PANEL_USE_VBIASEN	(1<<5)
 
 struct sm501_platdata_fbsub {
 	struct fb_videomode	*def_mode;

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

#1 lore raw
Quoted 7 lines · Magnus Damm

sm501fb: control panel pin usage with platform data flags

This patch makes it possible to control panel pins usage with flags passed from the platform data. Without this patch the sm501fb driver always controls the VBIASEN and FPEN pins. The polarity and use of these pins are very platform specific, so this patch introduces the flags SM501FB_FLAG_PANEL_USE_VBIASEN and SM501FB_FLAG_PANEL_USE_FPEN which enable the use of these pins.

Hi, can you change this to having these flags disable these functions, say SM501FB_FLAG_PANEL_NO_VBIASEN so that existing functionality can be retained without changing everyone else's usage.

Quoted 94 lines

This patch is needed to support the a Sharp LQ104V1DG21 lcd panel on SuperH platforms such as R2D-1 and R2D-PLUS boards. Letting the sm501fb driver control the FPEN and VBIASEN pins like today just results in lcd panel flicker.

---

This is the same patch that was sent to linux-fbdev-devel on 20071228.

 drivers/video/sm501fb.c |   41 +++++++++++++++++++++++++----------------
 include/linux/sm501.h   |    2 ++
 2 files changed, 27 insertions(+), 16 deletions(-)
drivers/video/sm501fb.c +25 -16
@@ -639,6 +639,7 @@ static void sm501fb_panel_power(struct s
 {
 	unsigned long control;
 	void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL;
+	struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl;
 
 	control = readl(ctrl_reg);
 
@@ -655,26 +656,34 @@ static void sm501fb_panel_power(struct s
 		sm501fb_sync_regs(fbi);
 		mdelay(10);
 
-		control |= SM501_DC_PANEL_CONTROL_BIAS;	/* VBIASEN */
-		writel(control, ctrl_reg);
-		sm501fb_sync_regs(fbi);
-		mdelay(10);
-
-		control |= SM501_DC_PANEL_CONTROL_FPEN;
-		writel(control, ctrl_reg);
+		if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+			control |= SM501_DC_PANEL_CONTROL_BIAS;	/* VBIASEN */
+			writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
 
+		if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+			control |= SM501_DC_PANEL_CONTROL_FPEN;
+			writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
 	} else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
 		/* disable panel power */
+		if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+			control &= ~SM501_DC_PANEL_CONTROL_FPEN;
+			writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
 
-		control &= ~SM501_DC_PANEL_CONTROL_FPEN;
-		writel(control, ctrl_reg);
-		sm501fb_sync_regs(fbi);
-		mdelay(10);
-
-		control &= ~SM501_DC_PANEL_CONTROL_BIAS;
-		writel(control, ctrl_reg);
-		sm501fb_sync_regs(fbi);
-		mdelay(10);
+		if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+			control &= ~SM501_DC_PANEL_CONTROL_BIAS;
+			writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
 
 		control &= ~SM501_DC_PANEL_CONTROL_DATA;
 		writel(control, ctrl_reg);
include/linux/sm501.h +2 -1
@@ -70,6 +70,8 @@ extern unsigned long sm501_gpio_get(stru
 #define SM501FB_FLAG_DISABLE_AT_EXIT	(1<<1)
 #define SM501FB_FLAG_USE_HWCURSOR	(1<<2)
 #define SM501FB_FLAG_USE_HWACCEL	(1<<3)
+#define SM501FB_FLAG_PANEL_USE_FPEN	(1<<4)
+#define SM501FB_FLAG_PANEL_USE_VBIASEN	(1<<5)
 
 struct sm501_platdata_fbsub {
 	struct fb_videomode	*def_mode;
 
-------------------------------------------------------------------------

This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Linux-fbdev-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel

Signature · 8 lines
Ben ([email protected], http://www.fluff.org/)

  'a smiley only costs 4 bytes'

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/