Skip to contentSkip to conversation

: move ColdFire vectors.c to its own coldfire directory

PATCH In review Greg Ungerer 1 participant 1 message Feb 1, 2008

lore
Share & tools
lore
#0 lore raw

PATCH 5/6 : move ColdFire vectors.c to its own coldfire directory

Move common ColdFire CPU vectors.c to common coldfire platform directory.

Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel.

arch/m68knommu/platform/5307/vectors.c +0 -105
diff -Naurp linux-2.6.24/arch/m68knommu/platform/5307/vectors.c linux-2.6.24.1/arch/m68knommu/platform/5307/vectors.c
@@ -1,105 +0,0 @@
-/***************************************************************************/
-
-/*
- *	linux/arch/m68knommu/platform/5307/vectors.c
- *
- *	Copyright (C) 1999-2007, Greg Ungerer <[email protected]>
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-#include <asm/mcfwdebug.h>
-
-/***************************************************************************/
-
-#ifdef TRAP_DBG_INTERRUPT
-
-asmlinkage void dbginterrupt_c(struct frame *fp)
-{
-	extern void dump(struct pt_regs *fp);
-	printk(KERN_DEBUG "%s(%d): BUS ERROR TRAP\n", __FILE__, __LINE__);
-	dump((struct pt_regs *) fp);
-	asm("halt");
-}
-
-#endif
-
-/***************************************************************************/
-
-extern e_vector	*_ramvec;
-
-void set_evector(int vecnum, void (*handler)(void))
-{
-	if (vecnum >= 0 && vecnum <= 255)
-		_ramvec[vecnum] = handler;
-}
-
-/***************************************************************************/
-
-/* Assembler routines */
-asmlinkage void buserr(void);
-asmlinkage void trap(void);
-asmlinkage void system_call(void);
-asmlinkage void inthandler(void);
-
-void __init init_vectors(void)
-{
-	int i;
-
-	/*
-	 *	There is a common trap handler and common interrupt
-	 *	handler that handle almost every vector. We treat
-	 *	the system call and bus error special, they get their
-	 *	own first level handlers.
-	 */
-	for (i = 3; (i <= 23); i++)
-		_ramvec[i] = trap;
-	for (i = 33; (i <= 63); i++)
-		_ramvec[i] = trap;
-	for (i = 24; (i <= 31); i++)
-		_ramvec[i] = inthandler;
-	for (i = 64; (i < 255); i++)
-		_ramvec[i] = inthandler;
-	_ramvec[255] = 0;
-
-	_ramvec[2] = buserr;
-	_ramvec[32] = system_call;
-
-#ifdef TRAP_DBG_INTERRUPT
-	_ramvec[12] = dbginterrupt;
-#endif
-}
-
-/***************************************************************************/
-
-void enable_vector(unsigned int irq)
-{
-	/* Currently no action on ColdFire */
-}
-
-void disable_vector(unsigned int irq)
-{
-	/* Currently no action on ColdFire */
-}
-
-void ack_vector(unsigned int irq)
-{
-	/* Currently no action on ColdFire */
-}
-
-/***************************************************************************/
-
-void coldfire_reset(void)
-{
-	HARD_RESET_NOW();
-}
-
-/***************************************************************************/
arch/m68knommu/platform/coldfire/vectors.c +105 -0

105 lines not on this page · raw message