Skip to contentSkip to conversation

: fix 528x ColdFire cache settings

M68KNOMMU Greg Ungerer 1 participant 1 message Feb 1, 2008

lore
Share & tools
lore
#0 lore raw

Fix problems with the 528x ColdFire CPU cache setup. Do not cache the flash region (if present), and make the runtime settings consistent with the init setting.

Problems pointed out by Bernd Buttner <[email protected]>

---

include/asm-m68knommu/cacheflush.h +1 -1
diff -Naurp linux-2.6.24/include/asm-m68knommu/cacheflush.h linux-2.6.24-uc0/include/asm-m68knommu/cacheflush.h
@@ -53,7 +53,7 @@ static inline void __flush_cache_all(voi
 #endif /* CONFIG_M5407 */
 #if defined(CONFIG_M527x) || defined(CONFIG_M528x)
 	__asm__ __volatile__ (
-        	"movel	#0x81400100, %%d0\n\t"
+		"movel	#0x81000200, %%d0\n\t"
         	"movec	%%d0, %%CACR\n\t"
 		"nop\n\t"
 		: : : "d0" );
include/asm-m68knommu/mcfcache.h +1 -1
diff -Naurp linux-2.6.24/include/asm-m68knommu/mcfcache.h linux-2.6.24-uc0/include/asm-m68knommu/mcfcache.h
@@ -60,7 +60,7 @@
 	nop
 	movel	#0x0000c020, %d0	/* Set SDRAM cached only */
 	movec	%d0, %ACR0
-	movel	#0xff00c000, %d0	/* Cache Flash also */
+	movel	#0x00000000, %d0	/* No other regions cached */
 	movec	%d0, %ACR1
 	movel	#0x80000200, %d0	/* Setup cache mask */
 	movec	%d0, %CACR		/* Enable cache */