ucc_geth: add support for netpoll
Subsystems (2)
PATCH 2/2 ucc_geth: add support for netpoll
This patch adds netpoll support for the QE UCC Gigabit Ethernet driver. Tested using netconsole and KGDBoE.
Signed-off-by Anton Vorontsov <[email protected]>
---
Just resending this.
drivers/net/ucc_geth.c | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-)
drivers/net/ucc_geth.c +20 -0
@@ -3666,6 +3666,23 @@ static irqreturn_t ucc_geth_irq_handler(int irq, void *info)return IRQ_HANDLED ; } +#ifdef CONFIG_NET_POLL_CONTROLLER +/* +* Polling 'interrupt' - used by things like netconsole to send skbs +* without having to re-enable interrupts. It's not called while +* the interrupt routine is executing. +*/ +static void ucc_netpoll (struct net_device *dev) +{ +struct ucc_geth_private *ugeth =netdev_priv (dev); +int irq = ugeth->ug_info->uf_info.irq; + +disable_irq (irq); +ucc_geth_irq_handler (irq, dev); +enable_irq (irq); +} +#endif /* CONFIG_NET_POLL_CONTROLLER */ +/* Called when something needs to use the ethernet device */ /* Returns 0 for success. */ static int ucc_geth_open (struct net_device *dev)
@@ -4008,6 +4025,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma#ifdef CONFIG_UGETH_NAPI netif_napi_add (dev, &ugeth->napi, ucc_geth_poll,UCC_GETH_DEV_WEIGHT );#endif /* CONFIG_UGETH_NAPI */ +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = ucc_netpoll; +#endif dev->stop = ucc_geth_close;// dev->change_mtu = ucc_geth_change_mtu; dev->mtu =1500 ;
Signature · 1 line
1.5.2.2