2.6.24-mm1
Subsystems (11)
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
- The x86 git tree has been dropped due to runtime failure on one of my test machines
- The kgdb tree remains dropped due to git-x86 clashes
- The git-newsetup tree remains dropped due to git-x86 clashes
- The git-perfmon tree remains dropped due to git-x86 clashes
- Andi's x86 quilt tree remains dropped due to git-x86 clashes
- The ext4 tree is dropped because it contains work which clashes with pending 2.6.25 material
Boilerplate:
- See the `hot-fixes' directory for any important updates to this patchset.
- To fetch an -mm tree using git, use (for example)
git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1 git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1
- -mm kernel commit activity can be reviewed by subscribing to the mm-commits mailing list.
echo "subscribe mm-commits" | mail [email protected]
- If you hit a bug in -mm and it is not obvious which patch caused it, it is most valuable if you can perform a bisection search to identify which patch introduced the bug. Instructions for this process are at
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt
But beware that this process takes some time (around ten rebuilds and reboots), so consider reporting the bug first and if we cannot immediately identify the faulty patch, then perform the bisection search.
- When reporting bugs, please try to Cc: the relevant maintainer and mailing list on any email.
- When reporting bugs in this kernel via email, please also rewrite the email Subject: in some manner to reflect the nature of the bug. Some developers filter by Subject: when looking for messages to read.
- Occasional snapshots of the -mm lineup are uploaded to ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on the mm-commits list. These probably are at least compilable.
- More-than-daily -mm snapshots may be found at
http://userweb.kernel.org/~akpm/mmotm/. These are almost certainly not compileable.
Changes since 2.6.24-rc8-mm1:
origin.patch
git-acpi.patch
git-alsa.patch
git-agpgart.patch
git-arm.patch
git-audit-master.patch
git-avr32.patch
git-cpufreq.patch
git-drm.patch
git-drm-fix.patch
git-dvb.patch
git-hwmon.patch
git-gfs2-nmw.patch
git-hrt.patch
git-ieee1394.patch
git-infiniband.patch
git-input.patch
git-jfs.patch
git-kbuild.patch
git-kvm.patch
git-leds.patch
git-libata-all.patch
git-md-accel.patch
git-mmc.patch
git-mtd.patch
git-net.patch
git-backlight.patch
git-nfsd.patch
git-ocfs2.patch
git-s390.patch
git-sched.patch
git-sh.patch
git-scsi-misc.patch
git-scsi-misc-gdth-fix.patch
git-block.patch
git-unionfs.patch
git-v9fs.patch
git-watchdog.patch
git-watchdog-fixup.patch
git-wireless.patch
git-ipwireless_cs.patch
git-xfs.patch
git-xtensa.patch
git trees
-cpufreq-initialise-default-governor-before-use.patch
-hfs-fix-coverity-found-null-deref.patch
-address-hfs-on-disk-corruption-robustness-review-comments.patch -address-hfs-on-disk-corruption-robustness-review-comments-checkpatch-fixes.patch -pnpacpi-print-resource-shortage-message-only-once-more.patch -cris-v10-vmlinuxldss-fix-kernel-oops-on-boot-and-use-common-defines.patch
-mm-fix-section-mismatch-warning-in-page_allocc.patch
-jbd-do-not-try-lock_acquire-after-handle-made-invalid.patch
-alpha-fix-conversion-from-denormal-float-to-double.patch
-ifdef-very-expensive-debug-check-in-page-fault-path.patch
-fix-radeonfb-regression-with-xpress-200m-5955.patch
-revert-local_t-documentation-update.patch
-fix-unbalanced-helper_lock-in-kernel-kmodc.patch
-acpi-ignore-acpi-video-devices-that-arent-present-in-hardware.patch -acpi-ignore-acpi-video-devices-that-arent-present-in-hardware-checkpatch-fixes.patch
-agk-dm-dm-raid1-report-fault-status.patch
-intel_agp-add-new-chipset-ids.patch
-intel_agp-add-new-chipset-ids-checkpatch-fixes.patch
-agk-dm-dm-raid1-mark-and-clear-nosync-writes.patch
-powerpc-add-fixed-phy-support-for-fs_enet.patch
-gregkh-driver-chinese-add-the-known_regression-uri-to-the-howto.patch -gregkh-driver-chinese-rephrase-english-introduction-in-howto.patch -gregkh-driver-chinese-change-man-pages-maintainer-address-in-howoto.patch -gregkh-driver-chinese-add-translation-of-submittingpatches.patch -gregkh-driver-chinese-add-translation-of-submittingdrivers.patch
-gregkh-driver-chinese-add-translation-of-oops-tracingtxt.patch -gregkh-driver-chinese-add-translation-of-stable_kernel_rulestxt.patch -gregkh-driver-chinese-add-translation-of-volatile-considered-harmfultxt.patch -gregkh-driver-chinese-add-translation-of-sparsetxt.patch
-gregkh-driver-chinese-add-translation-of-codingstyle.patch
-gregkh-driver-sysfs-fix-a-copy-n-paste-typo-in-comment.patch
-gregkh-driver-nozomi.patch
-gregkh-driver-documentation-replace-obsolete-driverfs-with-sysfs.patch -gregkh-driver-kobject-remove-incorrect-comment-in-kobject_rename.patch -gregkh-driver-pm-acquire-device-locks-prior-to-suspending.patch
-gregkh-driver-kref-add-kref_set.patch
-gregkh-driver-aoechr-convert-from-class_device-to-device.patch -gregkh-driver-atm-convert-struct-class_device-to-struct-device.patch -gregkh-driver-coda-convert-struct-class_device-to-struct-device.patch -gregkh-driver-dma-convert-from-class_device-to-device-for-dma-engine.patch -gregkh-driver-ide-convert-from-class_device-to-device-for-ide-tape.patch -gregkh-driver-isdn-convert-from-class_device-to-device-for-isdn-capi.patch -gregkh-driver-adb-convert-from-class_device-to-device.patch
-gregkh-driver-mcp_ucb1200-convert-from-class_device-to-device.patch -gregkh-driver-mtd-convert-from-class_device-to-device-for-mtd-mtdchar.patch -gregkh-driver-paride-convert-from-class_device-to-device-for-block-paride.patch -gregkh-driver-pktcdvd-convert-from-class_device-to-device-for-block-pktcdvd.patch -gregkh-driver-tifm-convert-from-class_device-to-device-for-ti-flash-media.patch -gregkh-driver-cosa-convert-from-class_device-to-device-for-cosa-sync-driver.patch
-gregkh-driver-ecryptfs-sysfs-fixes.patch
-gregkh-driver-driver-core-make-the-dev_-family-of-macros-in-deviceh-complete.patch -gregkh-driver-sysfs-create-optimal-relative-symlink-targets.patch
-gregkh-driver-sysfs-remove-spin_lock_unlocked.patch
-gregkh-driver-kobject-convert-ibmasm-to-use-kref-not-kobject.patch -gregkh-driver-kobject-convert-hvc_console-to-use-kref-not-kobject.patch -gregkh-driver-kobject-convert-hvcs-to-use-kref-not-kobject.patch -gregkh-driver-kobject-convert-icom-to-use-kref-not-kobject.patch -gregkh-driver-kobject-fix-up-kobject_set_name-to-use-kvasprintf.patch -gregkh-driver-kobject-make-kobject_cleanup-be-static.patch
-gregkh-driver-kobject-add-kobject_init_ng-function.patch
-gregkh-driver-kobject-add-kobject_add_ng-function.patch
-gregkh-driver-kobject-add-kobject_init_and_add-function.patch
-gregkh-driver-remove-struct-kobj_type-from-struct-kset.patch
-gregkh-driver-remove-kobj_set_kset_s.patch
-gregkh-driver-kset-add-kset_create_and_add-function.patch
-gregkh-driver-kobject-add-kobject_create_and_add-function.patch -gregkh-driver-kobject-get-rid-of-kobject_add_dir-git-agpgart-intel-agp-dont-zero-an-already-registered-resource-during-resume.patch .patch
-gregkh-driver-kobject-get-rid-of-kobject_kset_add_dir.patch
-gregkh-driver-kobject-convert-fuse-to-use-kobject_create.patch -gregkh-driver-kobject-convert-securityfs-to-use-kobject_create.patch -gregkh-driver-kobject-convert-debugfs-to-use-kobject_create.patch -gregkh-driver-kobject-convert-configfs-to-use-kobject_create.patch
-gregkh-driver-kset-convert-ecryptfs-to-use-kset_create.patch -gregkh-driver-kobject-convert-main-fs-kobject-to-use-kobject_create.patch -gregkh-driver-kset-convert-gfs2-to-use-kset_create.patch
-gregkh-driver-kset-convert-gfs2-dlm-to-use-kset_create.patch
-gregkh-driver-kset-convert-dlm-to-use-kset_create.patch
-gregkh-driver-kset-convert-pci-hotplug-to-use-kset_create_and_add.patch
-gregkh-driver-kset-remove-decl_subsys_name.patch
-gregkh-driver-kset-convert-kernel_subsys-to-use-kset_create.patch -gregkh-driver-kset-convert-drivers-base-busc-to-use-kset_create.patch -gregkh-driver-kset-convert-drivers-base-classc-to-use-kset_create.patch -gregkh-driver-kset-convert-drivers-base-firmwarec-to-use-kset_create.patch -gregkh-driver-kset-convert-sys-devices-to-use-kset_create.patch -gregkh-driver-kobject-convert-sys-hypervisor-to-use-kobject_create.patch -gregkh-driver-kobject-convert-s390-hypervisor-to-use-kobject_create.patch -gregkh-driver-kset-convert-sys-devices-system-to-use-kset_create.patch
-gregkh-driver-kset-convert-slub-to-use-kset_create.patch
-gregkh-driver-kset-move-sys-slab-to-sys-kernel-slab.patch
-gregkh-driver-kset-convert-sys-module-to-use-kset_create.patch
-gregkh-driver-kset-convert-sys-power-to-use-kset_create.patch -gregkh-driver-kset-convert-struct-bus_device-devices-to-use-kset_create.patch -gregkh-driver-kset-convert-struct-bus_device-drivers-to-use-kset_create.patch -gregkh-driver-kobject-kobj_attribute-handling.patch
-gregkh-driver-kset-convert-to-kobj_sysfs_ops.patch
-gregkh-driver-struct-user_info-sysfs.patch
-gregkh-driver-ecryptfs-remove-version_str-file-from-sysfs.patch -gregkh-driver-efivars-make-new_var-and-del_var-binary-sysfs-files.patch -gregkh-driver-kobject-convert-efivars-to-kobj_attr-interface.patch
-gregkh-driver-firmware-export-firmware_kset.patch -gregkh-driver-kset-convert-efivars-to-use-kset_create-for-the-efi-subsystem.patch -gregkh-driver-kset-convert-efivars-to-use-kset_create-for-the-vars-sub-subsystem.patch -gregkh-driver-kobject-convert-arm-mach-omap1-pmc-to-kobj_attr-interface.patch -gregkh-driver-kobject-convert-pseries-powerc-to-kobj_attr-interface.patch -gregkh-driver-kobject-convert-s390-iplc-to-kobj_attr-interface.patch -gregkh-driver-kset-convert-s390-iplc-to-use-kset_create.patch -gregkh-driver-kobject-convert-parisc-pdc_stable-to-kobj_attr-interface.patch -gregkh-driver-kset-convert-parisc-pdc_stablec-to-use-kset_create.patch
-gregkh-driver-kset-kill-subsys-attr.patch
-gregkh-driver-kset-convert-edd-to-use-kset_create.patch -gregkh-driver-kobject-convert-sys-firmware-acpi-to-use-kobject_create.patch -gregkh-driver-firmware-remove-firmware_register.patch
-gregkh-driver-firmware-change-firmware_kset-to-firmware_kobj.patch
-gregkh-driver-kset-convert-ocfs2-to-use-kset_create.patch
-gregkh-driver-kset-convert-block_subsys-to-use-kset_create.patch
-gregkh-driver-kset-remove-decl_subsys-macro.patch
-gregkh-driver-kobject-convert-kernel_kset-to-be-a-kobject.patch
-gregkh-driver-kobject-remove-subsystem_register-functions.patch -gregkh-driver-kobject-clean-up-rpadlpar-horrid-sysfs-abuse.patch -gregkh-driver-kobject-convert-ecryptfs-to-use-kobject_create.patch -gregkh-driver-kobject-convert-efivars-to-use-kobject_create.patch -gregkh-driver-kobject-convert-parisc-pdc_stable-to-use-kobject_create.patch
-gregkh-driver-driver-core-clean-up-shutdownc.patch
-gregkh-driver-driver-core-clean-up-device_shutdown.patch
-gregkh-driver-driver-core-make-sys-power-a-kobject.patch -gregkh-driver-kobject-grab-the-kset-reference-in-kobject_add-not-kobject_init.patch -gregkh-driver-kobject-clean-up-debugging-messages.patch
-gregkh-driver-uio-fix-kobject-usage.patch
-gregkh-driver-kobject-change-net-bridge-to-use-kobject_create_and_add.patch -gregkh-driver-kobject-change-gfs2-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-infiniband-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-firmware-eddc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-firmware-efivarsc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-cpufreq-cpufreqc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-edac-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-cpuidle-sysfsc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-pci-hotplug-pci_hotplug_corec-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-base-sysc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-arch-x86-kernel-cpu-intel_cacheinfoc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-acpi-systemc-to-use-kobject_create_and_add.patch -gregkh-driver-kobject-change-drivers-block-pktcdvdc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-arch-sh-kernel-cpu-sh4-sqc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-net-ibmvethc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-parisc-pdc_stablec-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-arch-ia64-kernel-topologyc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-drivers-md-mdc-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-change-arch-x86-kernel-cpu-mcheck-mce_amd_64c-to-use-kobject_create_and_add.patch -gregkh-driver-kobject-change-arch-x86-kernel-cpu-mcheck-mce_amd_64c-to-use-kobject_init_and_add.patch -gregkh-driver-kobject-the-cris-iop_fw_loadc-code-is-broken.patch -gregkh-driver-kobject-convert-drivers-base-classc-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-drivers-base-corec-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-drivers-net-iseries_vethc-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-fs-char_devc-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-kernel-paramsc-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-kernel-userc-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-mm-slubc-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-net-bridge-br_ifc-to-use-kobject_init-add_ng.patch -gregkh-driver-driver-core-remove-owner-field-from-struct-bus_type.patch -gregkh-driver-driver-core-add-way-to-get-to-bus-kset.patch
-gregkh-driver-driver-core-add-way-to-get-to-bus-device-klist.patch -gregkh-driver-driver-core-remove-fields-from-struct-bus_type.patch -gregkh-driver-usb-use-proper-call-to-driver_create_file.patch
-gregkh-driver-pcmcia-use-proper-call-to-driver_create_file.patch
-gregkh-driver-pci-use-proper-call-to-driver_create_file.patch
-gregkh-driver-pci-remove-foolish-code-from-pci-driverc.patch
-gregkh-driver-driver-core-introduce-default-attribute-groups.patch -gregkh-driver-netiucv-use-device_driver-default-attribute-groups.patch -gregkh-driver-zfcp-use-device_driver-default-attribute-groups.patch -gregkh-driver-infiniband-make-ipath-driver-use-default-driver-groups.patch -gregkh-driver-driver-add-driver_add_kobj-for-looney-iseries_veth-driver.patch -gregkh-driver-driver-core-move-the-driver-specific-module-code-into-the-driver-core.patch -gregkh-driver-driver-core-move-the-static-kobject-out-of-struct-driver.patch -gregkh-driver-driver-core-clean-up-debugging-messages.patch -gregkh-driver-kobject-change-drivers-base-bus-to-use-kobject_init_and_add.patch -gregkh-driver-driver-core-fix-race-in-__device_release_driver.patch -gregkh-driver-driver-core-fix-class-glue-dir-cleanup-logic.patch -gregkh-driver-sysfs-fix-sys-module-holders-after-sysfs-logic-change.patch -gregkh-driver-kobject-drop-child-parent-ref-at-unregistration.patch
-gregkh-driver-block-device.patch
-gregkh-driver-kobject-convert-block-elevatorc-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-block-ll_rw_blkc-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-drivers-md-mdc-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-convert-kernel-modulec-to-use-kobject_init-add_ng.patch -gregkh-driver-kobject-remove-kobject_add-as-no-one-uses-it-anymore.patch -gregkh-driver-kobject-rename-kobject_add_ng-to-kobject_add.patch -gregkh-driver-kobject-remove-kobject_init-as-no-one-uses-it-anymore.patch -gregkh-driver-kobject-rename-kobject_init_ng-to-kobject_init.patch
-gregkh-driver-kobject-remove-kobject_register.patch
-gregkh-driver-kset-remove-kset_add-function.patch
-gregkh-driver-kobject-auto-cleanup-on-final-unref.patch
-gregkh-driver-modules-remove-unneeded-release-function.patch -gregkh-driver-kobject-convert-arch-from-kobject_unregister-to-kobject_put.patch -gregkh-driver-kobject-convert-drivers-from-kobject_unregister-to-kobject_put.patch -gregkh-driver-kobject-convert-fs-from-kobject_unregister-to-kobject_put.patch -gregkh-driver-kobject-convert-remaining-kobject_unregister-to-kobject_put.patch -gregkh-driver-kobject-remove-kobject_unregister-as-no-one-uses-it-anymore.patch -gregkh-driver-driver-core-change-sysdev-classes-to-use-dynamic-kobject-names.patch -gregkh-driver-kobject-remove-old-outdated-documentation.patch
-gregkh-driver-kobject-update-the-kobject-kset-documentation.patch -gregkh-driver-kobject-add-sample-code-for-how-to-use-kobjects-in-a-simple-manner.patch -gregkh-driver-kobject-add-sample-code-for-how-to-use-ksets-ktypes-kobjects.patch -gregkh-driver-driver-core-use-list_head-instead-of-call-to-init_list_head-in-__init.patch -gregkh-driver-sysfs-make-sysfs_deprecated-depend-on-sysfs.patch
-gregkh-driver-driver-core-fix-build-with-sysfs-n.patch
-gregkh-driver-kset-convert-to-kobj_sysfs_ops-vs-git-acpi.patch -revert-gregkh-driver-pm-acquire-device-locks-prior-to-suspending.patch
-pm-acquire-device-locks-on-suspend-rev-3.patch
-pm-acquire-device-locks-on-suspend-rev-3-checkpatch-fixes.patch -pm-acquire-device-locks-on-suspend-rev-3-checkpatch-fixes-2.patch -unbork-gregkh-driver-kset-convert-sys-devices-to-use-kset_create-vioc.patch
-intel-agp-enable-i915-recognition.patch
-drivers-media-dvb-frontends-xc5000c-dont-return-garbage-from-xc5000_init.patch -git-dvb-fix-drivers-media-video-bt8xx-bttv-driverc-build.patch
-jdelvare-i2c-i2c-nforce2-nforce2-supports-block-and-reset.patch
-jdelvare-i2c-i2c-pasemi-use-i2c_add_numbered_adapter.patch
-jdelvare-i2c-i2c-ibm_iic-whitespace-cleanups.patch
-jdelvare-i2c-i2c-pcf8575-new-driver.patch
-jdelvare-i2c-i2c-tsl2550-add-power-management.patch
-jdelvare-i2c-i2c-stub-mention-helper-script.patch
-jdelvare-i2c-i2c-stub-single-array.patch
-jdelvare-i2c-i2c-remove-deprecated-rtc-drivers.patch
-jdelvare-i2c-ixp4xx-i2c-gpio.patch
-jdelvare-i2c-i2c-remove-redundant-gpio-drivers.patch
-jdelvare-i2c-i2c-pxa-use-cpu_is_pxa27x.patch
-jdelvare-i2c-i2c-algo-bit-whitespace-cleanups.patch
-jdelvare-i2c-i2c-algo-bit-sendbyte-error-code.patch
-jdelvare-i2c-i2c-algo-pcf-kill-10bit-support.patch
-jdelvare-i2c-i2c-constify-client-address-data.patch
-jdelvare-i2c-i2c-constify-normal_i2c-rtc.patch
-jdelvare-i2c-i2c-constify-normal_i2c-other.patch
-jdelvare-i2c-i2c-kill-rogue-driver-ids.patch
-jdelvare-i2c-i2c-adapters-dont-set-retries.patch
-jdelvare-i2c-i2c-deprecate-video-bus-drivers.patch
-jdelvare-i2c-i2c-drop-redundant-client-usage-count.patch
-jdelvare-i2c-i2c-change-refcounting-prototypes.patch
-jdelvare-i2c-i2c-remove-redundant-i2c_adapter-list.patch
-jdelvare-i2c-i2c-remove-redundant-i2c_driver-list.patch
-jdelvare-i2c-i2c-core-rename-lock.patch
-jdelvare-i2c-i2c-tps65010-move-header.patch
-jdelvare-i2c-i2c-i801-01-document-features.patch
-jdelvare-i2c-i2c-i801-02-features-as-a-bitfield.patch
-jdelvare-i2c-i2c-i801-03-clear-block-buffer-mode.patch
-jdelvare-i2c-i2c-i801-04-add-support-for-i2c-block-read.patch
-jdelvare-i2c-i2c-id-delete-unused.patch
-jdelvare-i2c-i2c-sibyte-remove-bus-scan-parameter.patch
-jdelvare-i2c-i2c-transfer-support-atomic.patch
-jdelvare-i2c-i2c-pxa-add-polling-transfer.patch
-fix-jdelvare-i2c-i2c-constify-client-address-data.patch
-git-infiniband-versus-driver-tree.patch
-git-infiniband-fix-build-with-config_infiniband_ipoib_cm=n.patch
-ide-mm-hpt366-change-timing-register-masks.patch
-ide-mm-hpt366-kill-set_dma_mode-method-wrapper.patch
-ide-mm-hpt366-merge-set_dma_mode-methods.patch
-ide-mm-ide-remove-dma-master-field-from-ide-hwif-t-take-5.patch
-ide-mm-ide-remove-task-ioreg-t-typedef-take-2.patch
-ide-mm-ide-add-struct-ide_taskfile-take-2.patch -ide-mm-ide-disk-merge-lba28-and-lba48-host-protected-area-support-code-take-2.patch -ide-mm-ide-disk-fix-taskfile-registers-loading-order-in-__ide_do_rw_disk.patch -ide-mm-ide-disk-use-struct-ide_taskfile-in-__ide_do_rw_disk.patch
-ide-mm-ide-add-ide_tf_load-helper.patch
-ide-mm-ide-add-ide_no_data_taskfile-helper.patch
-ide-mm-ide-use-do-rw-taskfile-in-flagged-taskfile.patch
-ide-mm-ide-pmac-fix-pmac_ide_init_hwif_ports.patch
-ide-mm-ide-remove-irqf_disabled-from-irq-flags-for-ide-irq-handler.patch -ide-mm-ide-remove-config_idepci_share_irq-config-option.patch
-ide-mm-ide-remove-stale-ide-h-configuration-options.patch
-ide-mm-ide-tape-remove-dead-use_iotrace-code.patch -ide-mm-ide-fix-registers-loading-order-for-win_smart-in-execute_drive_cmd.patch -ide-mm-ide-fix-registers-loading-order-for-ide_nsector_reg-in-execute_drive_cmd.patch -ide-mm-ide-execute_drive_cmd-cleanup.patch
-ide-mm-ide-remove-ide_cmd-helper.patch
-ide-mm-ide-use-ide_tf_load-in-execute_drive_cmd.patch
-ide-mm-ide-use-ide_tflag_lba48-for-req_type_ata_taskfile-requests.patch -ide-mm-ide-remove-unnecessary-writes-to-hob-taskfile-registers.patch -ide-mm-ide-extend-timeout-for-req_type_ata_cmd_task-requests.patch -ide-mm-ide-switch-idedisk_prepare_flush-to-use-req_type_ata_taskfile-requests.patch -ide-mm-ide-switch-ide_task_ioctl-to-use-req_type_ata_taskfile-requests.patch
-ide-mm-ide-remove-req_type_ata_task.patch
-ide-mm-ide-floppy-remove-dead-code.patch
-ide-mm-ide-cpu-endianness-doesn-t-matter-for-special_t.patch
-ide-mm-ide-remove-ata_status_t-and-atapi_status_t.patch
-ide-mm-ide-remove-atapi_error_t-take-2.patch
-ide-mm-ide-remove-atapi_feature_t.patch
-ide-mm-ide-remove-ata_nsector_t-ata_data_t-and-atapi_bcount_t.patch
-ide-mm-ide-remove-atapi_ireason_t-take-3.patch
-ide-mm-ide-cd-fix-register-loading-order-in-cdrom_start_packet_command.patch -ide-mm-ide-floppy-tape-scsi-fix-register-loading-order-when-issuing-packet-command.patch -ide-mm-ide-add-ide_pktcmd_tf_load-helper.patch
-ide-mm-ide-remove-quirk_list.patch
-ide-mm-ide-remove-select_interrupt.patch
-ide-mm-ide-remove-hwif-intrproc.patch
-ide-mm-ide-remove-command-type-field-from-ide_task_t.patch
-ide-mm-ide-remove-tf_in_flags-field-from-ide_task_t.patch
-ide-mm-sc1200-remove-pointless-hwif-lookup-loop.patch
-ide-mm-ide-disk-fix-__ide_do_rw_disk-to-use-outbsync.patch -ide-mm-ide-disk-guarantee-400ns-delay-after-writing-command-register.patch -ide-mm-ide-merge-flagged_taskfile-into-do_rw_taskfile.patch
-ide-mm-ide-convert-do_rw_taskfile-to-use-data_phase.patch
-ide-mm-ide-use-data_phase-to-set-handler-in-do_rw_taskfile.patch
-ide-mm-ide-remove-handler-field-from-ide_task_t-take-2.patch
-ide-mm-ide-disk-extend-timeout-for-pio-out-commands.patch
-ide-mm-ide-disk-add-ide_tf_set_cmd-helper.patch
-ide-mm-ide-disk-use-do_rw_taskfile.patch
-ide-mm-ide-fix-registers-loading-order-in-ide_dump_ata_status.patch
-ide-mm-ide-add-ide_tf_read-helper.patch
-ide-mm-ide-printk-fix.patch
-ide-mm-ide-disk-use-ide_get_lba_addr.patch
-ide-mm-ide-kill-duplicate-code-in-ide_dump_ata_atapi_status.patch
-ide-mm-ide-make-extra-field-in-struct-ide_port_info-u8.patch -ide-mm-pdc202xx_new-move-pio-programming-code-to-pdcnew_set_pio_mode.patch -ide-mm-sis5513-factor-out-udma-programming-code.patch
-ide-mm-ide-add-ide_hflag_abuse_set_dma_mode-host-flag.patch
-ide-mm-sc1200-move-dma-timings-to-timing-tables.patch
-ide-mm-ide-remove-redundant-ide_dma_on-call-from-set_using_dma.patch
-ide-mm-ide-cleanup-ide_set_dma.patch
-ide-mm-ide-remove-redundant-dma-blacklist-check-from-__ide_dma_on.patch -ide-mm-sl82c105-program-dma-pio-timings-in-dma_start-and-ide_dma_end.patch -ide-mm-sl82c105-remove-no-longer-needed-selectproc-method.patch
-ide-mm-serverworks-cleanup-set_dma_mode-method.patch
-ide-mm-ide-disk-add-idedisk_set_doorlock-helper.patch
-ide-mm-ide-hopefully-fix-vdma-for-cs5520.patch
-ide-mm-cy82c693-correct-dma-modes-clipping.patch
-ide-mm-cy82c693-add-set_dma_mode-method.patch
-ide-mm-sgiioc4-add-ide_toggle_bounce-calls.patch
-ide-mm-icside-add-ide_toggle_bounce-calls.patch
-ide-mm-au1xxx-ide-add-ide_toggle_bounce-calls.patch -ide-mm-ide-remove-ide_dma_on-and-dma_off_quietly-methods-from-ide_hwif_t.patch
-ide-mm-ide-cris-fix-dma-methods.patch
-ide-mm-atiixp-remove-dma_host_on-and-dma_host_off-methods.patch -ide-mm-ide-move-drive-using_dma-check-to-callers-of-dma_host_on-method.patch -ide-mm-ide-merge-dma_host_-on-off-methods-into-dma_host_set-method.patch -ide-mm-ide-dump-taskfile-hob-registers-in-ide_tf_load-if-debug-is-defined.patch -ide-mm-ide-merge-fixup-and-quirkproc-methods.patch -ide-mm-ide-dont-try-to-unregister-interfaces-if-initializing-in-ide_register_hw.patch
-ide-mm-ide-kill-probe_hwif_init.patch
-ide-mm-ide-fix-probing-for-hosts-with-serialized-or-irq-sharing-interfaces.patch
-ide-mm-rapide-set-hwif-chipset.patch
-ide-mm-swarm-set-hwif-chipset.patch
-ide-mm-ide-add-hwif-chipset-fixup-to-ide_device_add.patch
-ide-mm-ide-remove-ideprobe_init.patch
-ide-mm-ide-fix-build-break-caused-by-ide-remove-ideprobe_init.patch
-ide-mm-sgiioc4-always-init-hwif-io_ports.patch
-ide-mm-ide-add-ide_init_port_hw-helper.patch
-ide-mm-ide-drop-initializing-argument-from-ide_register_hw.patch -ide-mm-ide-move-ide_arm_init-call-from-init_ide_data-to-ide_init.patch
-ide-mm-cmd640-fix-dependency-on-ide_generic.patch -ide-mm-ide-fix-host-drivers-depending-on-ide_generic-to-probe-for-interfaces-take-2.patch -ide-mm-ide-make-remaining-built-in-only-ide-host-drivers-modular.patch
-ide-mm-au1xxx-ide-au_ide_probe-fix.patch
-ide-mm-au1xxx-ide-use-ide_init_port_hw.patch
-ide-mm-ide-always-use-ide_std_init_ports-in-setup-pci-c.patch
-ide-mm-ide-use-ide_init_port_hw-in-setup-pci-c.patch
-ide-mm-rapide-remove-write-only-hwif-hwif_data.patch -ide-mm-ide-pmac-use-custom-hwif-sg_max_nents-only-if-dma-support-is-enabled.patch -ide-mm-ide-add-ide_set_irq-inline-helper.patch
-ide-mm-ide-print-banner-message-once-per-controller-in-m68k-host-drivers.patch -ide-mm-ide-move-config_idepci_pcibus_order-code-to-ide-scan-pci-c.patch -ide-mm-ide-make-config_idepci_pcibus_order-visible-and-deprecate-it.patch
-ide-mm-ide-add-ide_busy_sleep-helper.patch
-ide-mm-ide-remove-broken-disk-byte-swapping-support.patch
-ide-mm-cmd64x-remove-proc-ide-cmd64x.patch
-ide-mm-ide-fix-io_32bit-race-in-ide_taskfile_ioctl.patch -ide-mm-ide-clear-hob-bit-for-req_type_ata_cmd-requests-in-ide_end_drive_cmd.patch -ide-mm-ide-fix-final-status-check-in-task_in_intr.patch -ide-mm-ide-tape-fix-handling-of-non-special-requests-in-end_request-method.patch -ide-mm-ide-set-ide_tflag_in-flags-before-queuing-executing-command.patch -ide-mm-ide-remove-needless-cursg-clearing-from-task_end_request.patch
-ide-mm-ide-use-rq-nr_sectors-in-task_end_request.patch
-ide-mm-ide-task_end_request-fix.patch
-ide-mm-ide-kill-data_ready-define.patch
-ide-mm-ide-use-wait_drive_not_busy-in-drive_cmd_intr-take-2.patch -ide-mm-ide-initialize-rq-cmd_type-in-ide_init_drive_cmd-callers.patch -ide-mm-ide-convert-empty-req_type_ata_cmd-requests-to-use-req_type_ata_taskfile.patch -ide-mm-ide-dont-enable-local-irqs-for-pio-in-in-driver_cmd_intr-take-2.patch -ide-mm-ide-check-busy-and-error-status-bits-before-reading-data-in-drive_cmd_intr.patch -ide-mm-ide-fix-final-status-check-in-drive_cmd_intr.patch -ide-mm-ide-switch-set_xfer_rate-to-use-req_type_ata_taskfile-requests.patch -ide-mm-ide-switch-ide_cmd_ioctl-to-use-req_type_ata_taskfile-requests.patch
-ide-mm-ide-remove-req_type_ata_cmd.patch
-ide-mm-ide-cd-use-xfer_func_t-in-cdrom_pc_intr.patch
-ide-mm-ide-cd-add-ide_cd_pad_transfer-helper.patch
-ide-mm-ide-cd-fix-missing-data-handling-in-cdrom_pc_intr.patch
-ide-mm-ide-cd-fix-dma-error-handling-in-cdrom_newpc_intr.patch
-ide-mm-ide-cd-fix-trailing-whitespaces-in-changelog.patch -ide-mm-ide-cd-move-historical-changelog-to-documentation-ide-changelog-ide-cd-1994-2004.patch -ide-mm-ide-cd-remove-stale-cdrom_transfer_packet_command-comment.patch
-ide-mm-ide-cd-remove-unused-defines-from-ide-cd-h.patch
-ide-mm-ide-cd-remove-dead-code-from-cdrom_pc_intr.patch
-ide-mm-ide-cd-remove-unused-struct-atapi_cdrom_subchnl.patch -ide-mm-ide-cd-remove-needless-zeroing-of-info-fields-from-ide_cdrom_setup.patch -ide-mm-ide-cd-remove-unused-and-write-only-struct-ide_cd_config_flags-fields.patch -ide-mm-ide-cd-remove-struct-atapi_mechstat_header-changer_info-slot.patch
-ide-mm-ide-cd-cleanup-ide_cdrom_update_speed.patch
-ide-mm-ide-cd-add-ide_cd_capabilities-define.patch
-ide-mm-ide-cd-remove-redundant-config-flags.patch
-ide-mm-ide-cd-kill-cdrom_config_flags-macro.patch
-ide-mm-ide-cd-kill-cdrom_state_flags-macro.patch
-ide-mm-ide-cd-remove-struct-atapi_capabilities_page-take-2.patch
-ide-mm-ide-cd-remove-struct-ide_cd_config-state_flags.patch
-ide-mm-ide-cd-remove-no_door_locking-define.patch
-ide-mm-ide-cd-remove-standard_atapi-define.patch
-ide-mm-ide-cd-use-bcd2bin-bin2bcd-macros-from-linux-bcd-h.patch
-ide-mm-ide-cd-re-organize-handling-of-quirky-devices.patch -ide-mm-ide-cd-remove-duplicate-sense-keys-definitions-from-ide-cd-h.patch -ide-mm-ide-cd-coding-style-fixes-for-verbose_ide_cd_errors-code.patch -ide-mm-ide-cd-move-verbose_ide_cd_errors-code-to-ide-cd_verbose-c.patch -ide-mm-ide-cd-factor-out-ioctl-handlers-from-ide_cdrom_audio_ioctl.patch -ide-mm-ide-cd-merge-cdrom_play_audio-into-ide_cd_fake_play_trkind.patch -ide-mm-ide-cd-merge-cdrom_read_subchannel-into-ide_cdrom_get_mcn.patch -ide-mm-ide-cd-merge-cdrom_select_speed-into-ide_cdrom_select_speed.patch -ide-mm-ide-cd-move-lba_to_msf-and-msf_to_lba-to-linux-cdrom-h.patch -ide-mm-ide-cd-coding-style-fixes-for-cdrom_get_toc_entry.patch
-ide-mm-ide-cd-rename-cdrom_-functions-to-ide_cd_.patch
-ide-mm-ide-cd-move-code-handling-cdrom-c-ioctls-to-ide-cd_ioctl-c.patch
-ide-mm-ide-cd-remove-bug_on-from-cdrom_newpc_intr.patch -ide-mm-ide-cd-call-blk_dump_rq_flags-on-missing-data-in-cdrom_newpc_intr.patch -ide-mm-ide-cd-factor-out-request-sense-fixup-from-cdrom_pc_intr.patch -ide-mm-ide-cd-unify-request-end-exit-path-in-cdrom_pc_intr.patch
-ide-mm-ide-cd-merge-cdrom_pc_intr-and-cdrom_newpc_intr.patch
-ide-mm-ide-cd-remove-cdrom_do_pc_continuation.patch
-ide-mm-ide-cd-merge-cdrom_do_packet_command-and-cdrom_do_block_pc.patch
-ide-mm-ide-cd-add-ide_cd_drain_data-helper.patch
-ide-mm-ide-cd-factor-out-transfer-size-checking-from-cdrom_read_intr.patch -ide-mm-ide-cd-merge-cdrom_read_intr-and-cdrom_write_intr.patch -ide-mm-ide-cd-merge-cdrom_start_read_continuation-and-cdrom_start_write_cont.patch -ide-mm-ide-cd-merge-cdrom_start_read-and-cdrom_start_write.patch -ide-mm-ide-cd-unify-moving-to-the-next-buffer-in-cdrom_rw_intr.patch -ide-mm-ide-cd-prepare-cdrom_rw_intr-and-cdrom_newpc_intr-to-be-merged.patch -ide-mm-ide-cd-call-blk_dump_rq_flags-on-missing-data-in-cdrom_rw_intr.patch -ide-mm-ide-cd-merge-cdrom_rw_intr-and-cdrom_newpc_intr.patch -ide-mm-ide-cd-merge-cdrom_write_check_ireason-and-cdrom_read_check_ireason.patch -ide-mm-ide-cd-unify-request-end-exit-path-in-cdrom_decode_status.patch -ide-mm-ide-cd-update-driver-version-comments-and-copyrights.patch
-ide-mm-ide-add-ide_dump_identify-debug-helper.patch
-ide-mm-ide-floppy-tape-remove-debug-code-for-dumping-identify-data.patch -ide-mm-ide-cd-move-the-remaining-cdrom-c-ioctl-handling-code-to-ide-cd_ioctl-c-v2.patch -ide-mm-trm290-cannot-call-ide_setup_dma.patch
-ide-mm-ide-ide_setup_dma-assumes-8-ports.patch
-ide-mm-amd74xx-remove-amd_ide_chips-table.patch
-ide-mm-ide-add-ide_hflag_clear_simplex-host-flag.patch
-ide-mm-ide-add-ide_hflag_no_dsc-host-flag.patch
-ide-mm-piix-remove-stale-comments.patch
-ide-mm-ide-fix-ide_intr-for-non-pci-devices-and-config_blk_dev_idepci-y.patch -ide-mm-ide-remove-bug_on-from-ide_build_sglist.patch
-ide-mm-ide-use-ide_destroy_dmatable-instead-of-pci_unmap_sg.patch -ide-mm-ide-keep-pointer-to-struct-device-instead-of-struct-pci_dev-in-ide_hwif_t.patch
-ide-mm-au1xxx-ide-use-hwif-dev.patch
-ide-mm-icside-use-hwif-dev.patch
-ide-mm-ide-switch-to-dma-mapping-api.patch -ide-mm-ide-use-ide_build_sglist-and-ide_destroy_dmatable-in-non-pci-host-drivers.patch -ide-mm-au1xxx-ide-device-tree-bugfix.patch
-ide-mm-ide-pmac-macio-resource-freeing-bugfix.patch
-ide-mm-au1xxx-ide-rapide-use-hwif-index-for-ide_unregister.patch
-ide-mm-ide-delete-filenames-versions-from-comments.patch
-ide-mm-ide-update-add-my-copyrights.patch
-ide-mm-ide-floppy-cleanup-header.patch
-ide-mm-ide-dont-include-linux-hdsmart-h.patch
-ide-mm-linux-hdsmart-h-is-not-used-by-kernel-code.patch
-ide-mm-ide-fix-handling-of-busy-io-resources-in-probe_hwif.patch -ide-mm-ide-move-wait_hwif_ready-documentation-in-the-right-place.patch -ide-mm-ide-remove-hwif-present-manipulations-from-hwif_init.patch
-ide-mm-ide_platform-remove-struct-hwif_prop.patch
-ide-mm-ide-remove-unused-ide_hwgroup_t-fields.patch
-ide-mm-ide-remove-needless-zeroing-of-hwgroup-fields-from-init_irq.patch
-ide-mm-ide-cleanup-ide_system_bus_speed.patch
-ide-mm-ide-io-resources-are-released-too-early-in-ide_unregister.patch -ide-mm-ide-factor-out-code-removing-port-from-hwgroup-from-ide_unregister.patch -ide-mm-ide-prepare-init_irq-for-using-ide_remove_port_from_hwgroup.patch -ide-mm-ide-use-ide_remove_port_from_hwgroup-in-init_irq.patch
-ide-mm-ide-make-probe_hwif-return-an-error-value.patch
-ide-mm-ide-move-handling-of-io-resources-out-of-ide_probe_port.patch -ide-mm-ide-factor-out-code-for-tuning-devices-from-ide_probe_port.patch -ide-mm-ide-move-hwif_register-call-out-of-ide_probe_port.patch
-ide-mm-dtc2278-fix-io_32bit-handling.patch
-ide-mm-au1xxx-ide-fix-io_32bit-handling.patch
-ide-mm-atiixp-cs5535-scc_pata-fix-idex-ata66-parameter-handling.patch
-ide-mm-macide-remove-drive-capacity64-quirk.patch
-ide-mm-ide-always-set-dma-masks-in-ide_pci_setup_ports.patch -ide-mm-ide-separate-pci-specific-init-from-generic-init-in-ide_pci_setup_ports.patch -ide-mm-ide-add-struct-ide_port_info-instances-to-legacy-host-drivers.patch -ide-mm-ide-add-cable-detect-method-to-ide_hwif_t.patch
-ide-mm-ide-remove-needless-includes-from-pci-host-drivers.patch
-ide-mm-ide-floppy-convert-to-generic-packet-commands.patch -ide-mm-ide-floppy-replace-ntoh-s-l-and-hton-s-l-calls-with-the-generic-byteorder.patch -ide-mm-ide-floppy-remove-unnecessary-handler-ne-null-check.patch
-ide-mm-ide-floppy-disambiguate-function-names.patch
-ide-mm-ide-floppy-include-the-proper-headers.patch
-ide-mm-ide-floppy-cleanup-and-unify-debugging-macro-calls.patch -ide-mm-ide-floppy-remove-struct-idefloppy_capabilities_page.patch -ide-mm-ide-floppy-remove-struct-idefloppy_inquiry_result.patch -ide-mm-ide-floppy-remove-struct-idefloppy_request_sense_result.patch -ide-mm-ide-floppy-remove-struct-idefloppy_mode_parameter_header.patch -ide-mm-ide-floppy-remove-struct-idefloppy_flexible_disk_page.patch -ide-mm-ide-floppy-remove-struct-idefloppy_capacity_descriptor.patch -ide-mm-ide-floppy-factor-out-ioctl-handlers-from-idefloppy_ioctl.patch -ide-mm-ide-floppy-report-dma-handling-in-idefloppy_pc_intr-properly.patch -ide-mm-ide-floppy-mv-idefloppy_-should_-report_error.patch
-ide-mm-ide-floppy-remove-idefloppy_debug_bugs-macro.patch -ide-mm-ide-floppy-use-an-xfer_func_t-and-io_buf_t-typedefs-in-order-to-unify-rw.patch -ide-mm-ide-floppy-merge-idefloppy_-input-output-_buffers.patch
-ide-mm-ide-floppy-remove-unused-idefloppy_use_read12.patch
-ide-mm-ide-floppy-remove-idefloppy_debug_info.patch
-fix-ide-mm-ide-use-ide_destroy_dmatable-instead-of-pci_unmap_sg.patch -fix-misparenthesization-introduced-by-commit-78b65179d08e7e4466ba69d5ede85035a2c96358.patch -drivers-mtd-ubi-wlc-fix-uninitialized-var-warning.patch
-drivers-mtd-ubi-scanc-fix-uninitialized-var-warning.patch
-drivers-mtd-ubi-cdevc-unused-var.patch
-ucc_geth-fix-module-removal.patch
-ucc_geth-add-support-for-netpoll.patch
-pcmcia-3c574_cs-fix-dubious-bitfield-warning.patch
-gregkh-pci-pci-make-pci_restore_bars-static.patch
-gregkh-pci-pci-drivers-pci-romc-if-0-two-functions.patch
-gregkh-pci-pci-drivers-pci-remove-unused-exports.patch
-gregkh-pci-pcie-port-driver-correctly-detect-native-pme-feature.patch -gregkh-pci-pcie-utilize-pcie-transaction-pending-bit.patch
-gregkh-pci-pci-hotplug-switch-to-pci_get_bus_and_slot.patch
-gregkh-pci-pci-hotplug-remove-experimental.patch
-gregkh-pci-pci-hotplug-acpiphp-remove-unused-variable-from-acpiphp.patch -gregkh-pci-pci-hotplug-pci_hotplug_core-whitespace-fix.patch
-gregkh-pci-pci-hotplug-link-fakephp-last.patch
-gregkh-pci-pci-quirk_vialatency-omit-reading-pci-revision-id.patch -gregkh-pci-pci-via-cx700-quirk-to-disable-pci-bus-parking.patch -gregkh-pci-pci-mem-policy-fix-mempolicy-usage-in-pci-driver.patch -gregkh-pci-pci-get-rid-of-pci_dev-vendor-device-_compatible-fields.patch -gregkh-pci-pci-remove-unneeded-lock_kernel-in-drivers-pci-syscallc.patch -gregkh-pci-pci-always-export-pci_scan_single_device.patch
-gregkh-pci-pci-remove-additional-pci_scan_child_bus-prototype.patch -gregkh-pci-pci-drivers-pci-quirksc-coding-style-cleanup.patch
-gregkh-pci-pci-more-sanity-checks-for-dmar.patch
-gregkh-pci-pci-unhide-the-smbus-on-the-hp-xw4100.patch
-gregkh-pci-pci-hotplug-fix-rpaphp-directory-naming.patch
-gregkh-pci-pci-export-pci_restore_msi_state.patch
-gregkh-pci-pci-add-missing-space-in-printk-messages.patch -gregkh-pci-pcie-fix-pcie-hotplug-so-that-it-works-with-expresscard-slots-on-dell-notebooks-in-conjunction-with-modparam-of-pciehp_force-1.patch -gregkh-pci-pci-more-fixes-for-pcie-hotplug-so-that-it-works-with-expresscard-slots-on-dell-notebooks-in-conjunction-with-modparam-of-pciehp_force-1.patch -gregkh-pci-pcie-make-use-of-the-previously-split-out-pcie_init_enable_events-function.patch -gregkh-pci-pcie-fix-double-initialization-bug.patch
-gregkh-pci-pci-hotplug-acpiphp-fix-trivial-typos.patch -gregkh-pci-pci-hotplug-acpiphp-remove-unneeded-acpi_get_name-function-call.patch -gregkh-pci-pci-hotplug-pciehp-remove-needless-members-from-struct-controller.patch -gregkh-pci-pci-hotplug-pciehp-remove-needless-hp_slot-calculation.patch -gregkh-pci-pci-hotplug-pciehp-use-generic-function-to-find-ext-capability.patch -gregkh-pci-pci-hotplug-pciehp-fix-some-whitespace-damage.patch -gregkh-pci-pci-fix-bus-resource-assignment-on-32-bits-with-64b-resources.patch -gregkh-pci-pci-fix-warning-in-setup-resc-on-32-bit-platforms-with-64-bit-resources.patch -gregkh-pci-pci-remove-default-pci-expansion-rom-memory-allocation.patch
-gregkh-pci-pci-quirk-enable-msi-mapping-on-ht1000.patch
-gregkh-pci-pci-drivers-pci-msic-move-arch-hooks-to-the-top.patch
-gregkh-pci-pci-kconfig-help-don-t-refer-to-the-pci-howto.patch
-gregkh-pci-pci-spelling-fixes.patch
-gregkh-pci-pci-fix-for-quirk_e100_interrupt.patch
-gregkh-pci-pci-print-quirk-name-in-debug-messages.patch
-gregkh-pci-pci-use-dev_printk-in-quirk-messages.patch
-gregkh-pci-pci-use-dev_printk-in-x86-quirk-messages.patch
-gregkh-pci-pci-fix-typo-in-pci_save_pcix_state.patch -gregkh-pci-pci-correctly-initialize-a-structure-for-pcie_save_pcix_state.patch -gregkh-pci-pci-avoid-save-the-same-type-of-cap-multiple-times.patch -gregkh-pci-pci-add-pci_enable_device_-io-mem-intefaces.patch
-gregkh-pci-pci-remove-users-of-pci_enable_device_bars.patch
-gregkh-pci-pci-remove-pci_enable_device_bars.patch
-gregkh-pci-pci-remove-pci_enable_device_bars-from-documentation.patch -gregkh-pci-pciehp-wait-for-1000ms-before-led-operation-after-power-off.patch -gregkh-pci-pciehp-workaround-against-bad-dllp-during-power-off.patch -gregkh-pci-pciehp-block-new-requests-from-the-device-before-power-off.patch -gregkh-pci-pci-convert-drivers-pci-procc-to-use-unlocked_ioctl.patch -gregkh-pci-pci-make-pci-extended-config-space-a-driver-opt-in.patch
-gregkh-pci-pci_bridge-device.patch
-fix-gregkh-pci-pci-make-pci-extended-config-space-a-driver-opt-in.patch
-pcie-aer-dont-check-_osc-when-acpi-is-disabled.patch
-adapt-sclp_cpi_sysc-to-the-kobject-kset-changes.patch
-scsi-qla2xxx-possible-cleanups.patch
-scsi-pending-arm-convert-to-accessors.patch
-powerpc-export-copy_page-on-32bit.patch
-gregkh-usb-usb-keyspan-fix-oops.patch
-gregkh-usb-usb-gadget-fix-fsl_usb2_udc-potential-oops.patch
-gregkh-usb-usb-cp2101-new-device-ids.patch
-gregkh-usb-usb-add-support-for-4348-5523-winchiphead-usb-rs-232-adapter.patch -gregkh-usb-usb-sierra-add-support-for-aircard-881u.patch
-gregkh-usb-usb-adding-yc-cable-usb-serial-device-to-pl2303.patch
-gregkh-usb-usb-sierra-driver-add-devices.patch
-gregkh-usb-usb-correct-comments-in-usb-core-notifyc.patch -gregkh-usb-usb-ftdi_sio-enabling-multiple-elv-devices-adding-em1010pc.patch -gregkh-usb-usb-ftdi-sio-patch-to-add-vendor-device-id-for-atk_16ic-ccd.patch
-gregkh-usb-usb-use-gfp_noio-in-reset-path.patch
-gregkh-usb-usb-convert-from-class_device-to-device-for-usb-core.patch
-gregkh-usb-usb-remove-unnecessary-zeroing-from-ub.patch
-gregkh-usb-usb-autosuspend-for-cdc-acm.patch
-gregkh-usb-usb-isd200-don-t-include-linux-ideh.patch
-gregkh-usb-usb-add-iuu_phoenix-driver.patch -gregkh-usb-usb-sis-fb-driver-_ioctl32_conversion-functions-do-not-exist-in-recent-kernels.patch -gregkh-usb-usb-sisusb-_ioctl32_conversion-functions-do-not-exist-in-recent-kernels.patch -gregkh-usb-usb-s3c2410_udc-minor-irq-handler-cleanups.patch
-gregkh-usb-usb-usb-mon-mon_binc-cleanups.patch
-gregkh-usb-usb-device-dma-support-on-omap2.patch -gregkh-usb-usb-ti-3410-5052-usb-serial-convert-td_open_close_lock-to-mutex.patch -gregkh-usb-usb-m66592-udc-add-support-for-sh7722-usbf.patch
-gregkh-usb-usb-add-missing-space-to-printk-messages.patch
-gregkh-usb-usb-usb-storage-new-lockable-subclass-0x07.patch
-gregkh-usb-usb-add-printer-gadget-driver.patch
-gregkh-usb-usb-cypress_cy7c63-updated-contact-usage-information.patch -gregkh-usb-usb-usb_serial_console-fix-command-line-parsing.patch -gregkh-usb-usb-usb_serial-clean-tty-reference-in-the-last-close.patch -gregkh-usb-usb-usb_serial_console-allocate-fake-tty-and-termios-before-calling-driver-open-method.patch -gregkh-usb-usb-linux-usb-kbuild-needs-only-header-y-not-unifdef-y.patch -gregkh-usb-usb-drop-unnecessary-continue-in-a-few-drivers.patch
-gregkh-usb-usb-make-ksuspend_usbd-thread-non-freezable.patch
-gregkh-usb-usb-don-t-change-hc-power-state-for-a-freeze.patch
-gregkh-usb-usb-gadget-code-switches-to-pr_err-and-friends.patch
-gregkh-usb-usb-prepare-serial-core-for-autosuspend.patch
-gregkh-usb-usb-cyberjack-remove-a-unnecessary-variable.patch -gregkh-usb-usb-usb-peripheral-controller-driver-oops-avoidance.patch -gregkh-usb-usb-force-handover-port-to-companion-when-hub_port_connect_change-fails.patch -gregkh-usb-usb-dummy_hcd-don-t-register-drivers-on-the-platform-bus.patch
-gregkh-usb-always-announce-new-usb-devices.patch
-gregkh-usb-usb-convert-ohci-debug-files-to-use-debugfs-instead-of-sysfs.patch -gregkh-usb-usb-convert-ehci-debug-files-to-use-debugfs-instead-of-sysfs.patch -gregkh-usb-usb-remove-ohci-useless-masking-unmasking-of-wdh-interrupt.patch
-gregkh-usb-usb-repair-usbdevfs_connect-ioctl.patch
-gregkh-usb-usb-updates-to-usb_reset_composite_device.patch -gregkh-usb-usb-edgeport-usb-serial-converter-convert-es_sem-to-mutex.patch -gregkh-usb-usb-add-usbfs-stubs-for-suspend-and-resume.patch
-gregkh-usb-usb-ehci-add-separate-iaa-watchdog-timer.patch
-gregkh-usb-usb-dummy_hcd-change-the-default-power-budget.patch -gregkh-usb-usb-pl2303-cleanup-fish-and-soup-macros-in-pl2303-driver.patch -gregkh-usb-usb-pl2303-move-pl2303-vendor-specific-init-to-probe-function.patch -gregkh-usb-usb-pl2303-add-autosuspend-support-to-pl2303-usb-serial-converter.patch -gregkh-usb-usb-belkin_sa-clean-up-for-new-style-termios-and-speed-handling-plus-style.patch -gregkh-usb-usb-keyspan_pda-clean-up-speed-handling.patch
-gregkh-usb-usb-mct232-speed-new-termios-and-compliance-cleanups.patch
-gregkh-usb-usb-mon-nopage.patch
-gregkh-usb-usb-testing-driver-convert-dev-sem-to-mutex.patch
-gregkh-usb-usb-testing-driver-don-t-free-a-locked-mutex.patch
-gregkh-usb-usb-gadget-pxa2xx_udc-supports-inverted-vbus.patch
-gregkh-usb-usb-spelling-fixes.patch
-gregkh-usb-usb-ps3-fix-ehci-iso-transfer-bug.patch
-gregkh-usb-usb-usb-storage-initializersc-fix-signedness-difference.patch
-gregkh-usb-usb-usbdevfs_urb-__user-annotation.patch -gregkh-usb-usb-ehci-hcd-fix-sparse-warning-about-shadowing-status-symbol.patch -gregkh-usb-usb-add-marvell-orion-usb-host-support.patch
-gregkh-usb-usb-ehci-potential-oops-fix-on-arc-tdi-cores.patch -gregkh-usb-usb-gadget-ethernet-error-path-potential-oops-fix.patch -gregkh-usb-usb-fix-null-pointer-dereference-on-drivers-usb-serial-whiteheatc.patch -gregkh-usb-usb-gadget-at91_udc-minor-fix.patch
-gregkh-usb-usb-fix-hcd-kconfig-goofage.patch
-gregkh-usb-usb-tosa_udc_use_gpio_vbuspatch.patch
-gregkh-usb-usb-mos7720-clean-up-termios.patch
-gregkh-usb-usb-ti_usb-termios-cleanups.patch
-gregkh-usb-usb-io_ti-clean-up-termios-handling.patch
-gregkh-usb-usb-ftdi_sio-support-for-more-jtag-adaptors.patch
-gregkh-usb-usb-sierra-driver-add-update-dtr-logic.patch
-gregkh-usb-usb-export-suspend-statistics.patch
-gregkh-usb-usb-ohci-at91-uses-generic-gpio-calls.patch
-gregkh-usb-usb-at91_udc-uses-generic-gpio-calls-minor-cleanup.patch
-gregkh-usb-usb-pxa2xx_udc-use-debugfs-not-procfs.patch
-gregkh-usb-usb-add-ehci-ppc-of-bus-glue.patch
-gregkh-usb-usb-misc-legousbtower-semaphore-to-mutex.patch
-gregkh-usb-usb-add-ehci-ixp-bus-glue.patch
-gregkh-usb-usb-ehci-saves-some-memory-in-iso-transfer-descriptors.patch -gregkh-usb-usb-ehci-minor-iso-updates-always-support-split-iso.patch -gregkh-usb-usb-ehci-completes-high-speed-iso-urbs-sooner.patch -gregkh-usb-usb-usbfs-struct-async-is-a-fixed-size-structure.patch -gregkh-usb-usb-ehci-move-del_timer_sync-calls-outside-spinlocked-region.patch -gregkh-usb-usb-ehci-add-a-short-delay-to-the-bus_suspend-routine.patch
-fix-gregkh-usb-usb-ti_usb-termios-cleanups.patch
-9p-util-fix-semaphore-handling.patch
-wdt-fix-locking.patch
-wdt-fix-locking-checkpatch-fixes.patch
-prism54-remove-questionable-down_interruptible-usage.patch
-iwlwifi-fix-typo-in-drivers-net-wireless-iwlwifi-kconfig.patch
-hostap-section-mismatch-warning.patch
-ssb-add-ssb_pcihost_set_power_state-function.patch
-b44-power-down-phy-when-interface-down.patch
-drivers-net-wireless-iwlwifi-iwl-3945c-fix-printk-warning.patch
-drivers-net-wireless-iwlwifi-iwl-4965c-fix-printk-warning.patch -drivers-net-wireless-rt2x00-rt2x00usbc-fix-uninitialized-var-warning.patch
-git-x86-fix-doubly-merged-patch.patch
-bonding-locking-fix.patch
-usbtouchscreen-fix-buffer-overflow-make-more-egalax-work.patch
-keyspan-fix-oops.patch
-sky2-wake-on-lan-configuration-issues.patch
-m68knommu-use-raw-read-write-for-all-register-access-in-coldfire-timer.patch -m68knommu-use-container_of-to-access-uart-struct-in-coldfire-serial-driver.patch -m68knommu-cleanup-port-field-access-from-uart-struct-in-coldfire-serial-driver.patch -add-build-support-for-new-coldfire-serial-driver.patch
-add-configure-support-for-new-coldfire-serial-driver.patch
-m68knommu-platform-setup-for-5206-coldfire-uarts.patch
-m68knommu-platform-setup-for-5206e-coldfire-uarts.patch
-m68knommu-platform-setup-for-520x-coldfire-uarts.patch
-m68knommu-platform-setup-for-5249-coldfire-uarts.patch
-m68knommu-platform-setup-for-5272-coldfire-uarts.patch
-m68knommu-remove-vestiges-of-non-existent-disktel.patch
-use-wake_up_locked-in-eventpoll.patch
-use-macros-instead-of-task_-flags.patch
-use-macros-instead-of-task_-flags-checkpatch-fixes.patch
-add-task_wakekill.patch
-add-lock_page_killable.patch
-remove-__attribute_used__.patch
-remove-__attribute_used__-checkpatch-fixes.patch
-linux-inith-simplify-__meminitexit-dependencies.patch
-printk-trivial-optimizations.patch
-printk-trivial-optimizations-fix.patch
-ps3-checkpatch-drivers-ps3-ps3-sys-managerc.patch
-ps3-checkpatch-drivers-ps3-ps3-vuartc.patch
-kernel-add-mutex_lock_killable.patch
-vfs-use-mutex_lock_killable-in-vfs_readdir.patch
-fix-missing-n-in-checkpatchpl.patch
-xen-fiddle_vdso-must-be-__init.patch
-export-iov_shorten-for-ext4s-use.patch
-export-iov_shorten-for-ext4s-use-fix.patch
-create-arch-kconfig.patch
-add-have_oprofile.patch
-add-have_kprobes.patch
-add-buffer-head-related-helper-functions.patch
-ext4-mm-ext4_store_maxbytes_for_bitmaped_files-warning-fix.patch
-ext4-check-for-return-value-from-sb_set_blocksize.patch
-modules-make-module_address_lookup-safe.patch
-efi-split-efi-tables-parsing-code-from-efi-runtime-service-support-code.patch
-dont-error-on-higher-hz-values.patch
-make-copy_from_user_inatomic-not-zero-the-tail-on-i386-vs-reiser4.patch
Merged into mainline or a subsystem tree
+kvm-i386-fix.patch +sys_remap_file_pages-fix-vm_file-accounting.patch +drivers-net-wireless-b43-mainc-needs-ioh.patch +adb-add-missing-include-linux-platform_deviceh.patch
Fixes..
+lockdep-annotate-epoll.patch
Prevent bogus lockdep warnings from epoll
+drivers-usb-serial-io_tic-remove-pointless-eye-candy-in-debug-statements.patch +drivers-usb-serial-io_tic-remove-pointless-eye-candy-in-debug-statements-checkpatch-fixes.patch
Make a USB driver play nicer with my workflow.
+acpi-enable-c3-power-state-on-dell-inspiron-8200-update.patch
Update acpi-enable-c3-power-state-on-dell-inspiron-8200.patch
+acpi-backlight-reset-brightness-on-resume.patch +acpi-backlight-reset-brightness-on-resume-checkpatch-fixes.patch
ACPI backlight driver update
-git-alsa-fixup.patch
Unneeded
+git-agpgart-fix.patch
Make it compile
-working-3d-dri-intel-agpko-resume-for-i815-chip.patch
I got sick of sending this to the maintainer and fixing it up whenever he broke it so I just dropped it.
+convert-drivers-char-agp-frontendc-to-use-unlocked_ioctl.patch
unlocked_ioctl() conversion
+at91-correct-at91sam9263ek-lcd-power-gpio-pin.patch
at91 fix
+git-audit-master-fix-git-rejects.patch
Fix rejects in git-audit-master.patch (actually this tree is empty)
+audit-let-userspace-fully-control-tty-input-auditing.patch +use-find_task_by_vpid-in-audit-code.patch
audit stuff
+fix-timerfd-breakage-on-avr32-was-re-fix-variable-use-in-avr32-pte_alloc_one.patch
avr32 fix
+cifs-fix-warning.patch +bkl-removal-convert-cifs-over-to-unlocked_ioctl.patch
cifs things
+agk-dm-dm-raid1-handle-recovery-failures.patch
+agk-dm-dm-raid1-report-fault-status.patch
device-mapper tree updates
-git-powerpc-fixup.patch
Unneeded
+include-asm-powerpc-nvramh-needs-listh.patch
+include-asm-powerpc-nvramh-needs-listh-fix.patch
powerpc build fix
+gregkh-driver-kobject-always-build-in-kernel-ksysfso.patch +gregkh-driver-kobject-kerneldoc-comment-fix.patch +gregkh-driver-add-ja_jp-translation-of-stable_kernel_rulestxt.patch +gregkh-driver-nozomi-driver-update.patch +gregkh-driver-nozomi-constify-driver.patch +gregkh-driver-nozomi-finish-constification.patch +gregkh-driver-pm-export-device_pm_schedule_removal.patch +gregkh-driver-driver-core-convert-to-use-class_find_device-api.patch +gregkh-driver-driver-core-update-some-prototypes-in-platformtxt.patch +gregkh-driver-driver-core-remove-unneeded-get_-device-driver-calls.patch +gregkh-driver-net-convert-the-phy_device-file-to-use-bus_find_device_by_name.patch
driver tree updates
-revert-gregkh-driver-atm-convert-struct-class_device-to-struct-device.patch
Unneeded
+git-drm-fix.patch
Fix git-drm build
+jdelvare-i2c-i2c-algos-fix-typos.patch +jdelvare-i2c-i2c-pca-01-removing-trailing-whitespace.patch
i2c tree updates
-i2c-isp1301_omap-new-style-i2c-driver-updates-part-2.patch
Folded into i2c-isp1301_omap-new-style-i2c-driver-updates-part-1.patch
+adt7473-new-driver-for-analog-devices-adt7473-sensor-chip.patch +adt7473-new-driver-for-analog-devices-adt7473-sensor-chip-fix.patch
New sensor driver
-hwmon-new-chip-driver-for-ti-ads7828-a-d.patch -hwmon-new-chip-driver-for-ti-ads7828-a-d-checkpatch-fixes.patch -hwmon-new-chip-driver-for-ti-ads7828-a-d-update.patch
Dropped, I think.
+gfs2-make-gfs2_glockgl_owner_pid-be-a-struct-pid.patch +gfs2-make-gfs2_holdergh_owner_pid-be-a-struct-pid.patch
gfs interface fixes
+ia64-fix-the-order-of-atomic-operations-in-restore_previous_kprobes.patch +ia64-fix-userspace-compile-error-in-gcc_intrinh.patch +ia64-make-pfm_get_task-work-with-virtual-pids.patch +ia64-fix-ptrace-inside-a-namespace.patch +ia64-aliasing-test-fix-gcc-warnings-on-non-ia64.patch +ia64-slim-down-__clear_bit_unlock.patch
ia64 stuff I accumulated.
+infiniband-is-scrogged-again.patch
Make infiniband compile
+i8042-non-x86-build-fix.patch
Fix breakage in git-input.patch
+ata-drivers-ata-sata_mvc-needs-dmapoolh.patch
Fix breakage in git-libata-all.patch
+ide-mm-ppc-fix-ifdefs-in-mediabay-driver.patch +ide-mm-ide-remove-write-only-sata_misc-from-ide_hwif_t.patch +ide-mm-ide-remove-redundant-bug_on-from-atapi_-reset_pollfunc.patch +ide-mm-ide-remove-ide_setup_ports.patch +ide-mm-ide-add-ide_read_-alt-status-inline-helpers.patch +ide-mm-ide-add-ide_read_error-inline-helper.patch
IDE tree updates
+fix-ide-mm-ppc-fix-ifdefs-in-mediabay-driver.patch
Fix it
+updates-for-the-memstick-driver.patch
Update the memstick driver
+memstick-git-busted.patch
And disable it. It might now miss the merge window: a direct consequence of the way in which the git-block tree is being "managed".
+mips-use-find_task_by_vpid-in-system-calls.patch
Mips interface fixup
+drivers-mtd-maps-physmapc-fix-compile-remove-ifdef.patch
Make MTD build
+mtd-fix-startup-lock-when-using-multiple-nor-flash-chips.patch
MTD fix
-git-net-fix-conflicts.patch
-git-net-vs-git-lblnet.patch
-git-net-vs-git-lblnet-2.patch
Now unneeded
+hamradio-fix-dmascc-section-mismatch.patch +tun-dev-impossible-to-deassert-iff_one_queue-or-iff_no_pi.patch
Some net fixes
-git-netdev-all-fix-conflicts.patch
-git-net-vs-git-netdev-all.patch
Now unneeded
+mv643xx_eth-fix-byte-order-when-checksum-offload-is-enabled.patch +8390-split-8390-support-into-a-pausing-and-a-non-pausing-driver-core.patch +drivers-net-tlanc-compilation-warning-fix.patch +drivers-net-dm9000c-vague-probably-wrong-build-fix.patch
netdev things
-bluetooth-rfcomm-tty_close-before-destruct.patch
Dropped
+hci_ldisc-fix-null-pointer-deref.patch
+rfcomm-tty-destroy-before-tty_close.patch
New bluetooth things
-net-sunrpc-schedc-revert-git-net-changes.patch
-net-sunrpc-schedc-reapply-git-net-changes.patch
Now unneeded
+parisc-new-termios-definitions.patch
parisc update
+serial-mpsc-set-baudrate-when-brg-divider-is-set.patch
serial driver fix
+gregkh-pci-pci-pci_enable_device_bars-fix-for-lpfc-driver.patch +gregkh-pci-pci-fix-section-mismatch-warnings-referring-to-pci_do_scan_bus.patch +gregkh-pci-pci-fix-4x-section-mismatch-warnings.patch
PCI tree updates
-revert-gregkh-pci-pci-use-dev_printk-in-x86-quirk-messages.patch
Now unneeded
+fix-gregkh-pci-pci-pcie-aspm-support.patch
Fix PCIE dependencies
-git-sched-fixup.patch
Now unneeded
+sh-termios-ioctl-definitions.patch
sh update
-git-scsi-misc-vs-gregkh-pci-pci-remove-users-of-pci_enable_device_bars.patch
Now unneeded
+scsi-fix-isa-pcmcia-compile-problem.patch +scsi-fix-isa-pcmcia-compile-problem-checkpatch-fixes.patch
scsi fix
+usb-ohci-sm501-driver-v2-fix.patch +usb-yet-another-dell-wireless-cdma-evdo-modem.patch
USB updates
+9p-fix-p9_printfcall-export.patch
Fix v8fs build
+b43-fix-build-with-config_ssb_pcihost=n.patch
wireless config fix
-revert-kvm-stuff-to-make-git-x86-apply.patch
Now unneeded
-git-x86-fixup.patch
-git-x86-fixup-2.patch
Now unneeded
+x86-amd-thermal-interrupt-support.patch +x86-amd-thermal-interrupt-support-fix-2.patch +x86-remove-pt_regs-arg-from-smp_thermal_interrupt.patch
x86 updates
+x86-clear-pci_mmcfg_virt-when-mmcfg-get-rejected.patch +x86-mmconf-enable-mcfg-early.patch +x86-mmconf-enable-mcfg-early-cleanup.patch +x86_64-check-and-enable-mmconfig-for-amd-family-10h-opteron-v3.patch +x86_64-check-msr-to-get-mmconfig-for-amd-family-10h-opteron-v3.patch +x86_64-set-cfg_size-for-amd-family-10h-in-case-mmconfig-is-used.patch
Some things which straddle x86 and PCI.
-git-cryptodev-fixup.patch
Now unneeded
+slub-fix-sysfs-refcounting.patch
slub fix
+maps4-add-proc-pid-pagemap-interface-fix.patch
Fix maps4-add-proc-pid-pagemap-interface.patch
-add-remove_memory-for-ppc64-2.patch
+add-remove_memory-for-ppc64-3.patch
memory hot-remove update
+add-mm-argument-to-pte-pmd-pud-pgd_free-checkpatch-fixes.patch
Fix add-mm-argument-to-pte-pmd-pud-pgd_free.patch
-config_highpte-vs-sub-page-page-tables.patch -config_highpte-vs-sub-page-page-tables-fix.patch -config_highpte-vs-sub-page-page-tables-fix-2.patch
Dropped due to git-x86 churn
+document-about-lowmem_reserve_ratio.patch +page-migraton-handle-orphaned-pages.patch +page-migraton-handle-orphaned-pages-fix.patch +mm-fix-pageuptodate-data-race.patch +mm-fix-section-mismatch-warning-in-sparsec.patch +writeback-speed-up-writeback-of-big-dirty-files.patch
MM updates
+slob-fix-free-block-merging-at-head-of-subpage.patch +slob-reduce-external-fragmentation-by-using-three-free-lists.patch +slob-correct-kconfig-description.patch
slob updates
+smack-version-11c-simplified-mandatory-access-control-kernel-fix.patch
Fix smack-version-11c-simplified-mandatory-access-control-kernel.patch
+smack-socket-label-setting-fix.patch
Another smack fix
+frv-use-find_task_by_vpid-in-cxn_pin_by_pid.patch
frv interface update
+misc-add-possibility-to-remove-misc-devices-during-suspend-resume.patch +hwrng-add-possibility-to-remove-hwrng-devices-during-suspend-resume.patch +leds-add-possibility-to-remove-leds-classdevs-during-suspend-resume.patch +b43-avoid-unregistering-device-objects-during-suspend.patch
suspend/resume fixes
+uml-smp-locking-commentary.patch +uml-implement-o_append.patch +uml-remove-fakehd.patch +uml-debug_shirq-fixes.patch +uml-add-back-config_hz.patch +uml-style-fixes-in-arch-um-sys-x86_64.patch +uml-add-newlines-to-printks.patch +uml-move-register-initialization.patch +uml-remove-unused-fields-from-mm_context.patch +uml-remove-topdir.patch +uml-spelling-fix.patch +uml-remove-map_cb.patch +uml-fix-infinite-mconsole-loop.patch +uml-use-of-a-public-mac-is-a-warning-not-an-error.patch +uml-ldt-mutex-conversion.patch +uml-mconsole-mutex-conversion.patch +uml-port-mutex-conversion.patch +uml-defconfig-tweaks.patch +uml-redo-the-calculation-of-nr_syscalls.patch +uml-make-mconsole_stack-namespace-aware.patch
UML updates
+address-hfs-on-disk-corruption-robustness-review-comments.patch
HFS fix
+synclink_gt-fix-missed-serial-input-signal-changes.patch
serial driver fix
+fix-ixany-and-restart-after-signal-eg-ctrl-c-in-n_tty-line-discipline-update.patch
Fix fix-ixany-and-restart-after-signal-eg-ctrl-c-in-n_tty-line-discipline.patch
+drivers-cdrom-cdromc-simplify-logic-in-cdrom_release.patch +w1-w1_thermc-standardize-units-to-millidegrees-c.patch +atari-floppy-rename-disk_type-to-atari_disk_type.patch
Misc
+spi-s3c-drivers-shouldnt-care-about-spi_board_info.patch +spi-superh-spi-using-sci.patch +spi_imx-spelling-fixes.patch +spi-omap2_mcspi-handles-omap3-too.patch +spi_bfin-remove-useless-fault-path.patch +spi_bfin-use-more-useful-gpio-labels.patch +spi_bfin-wait-for-tx-to-complete-on-some-cs_chg-paths.patch +spi_bfin-wait-for-tx-to-complete-on-full-duplex-paths.patch +spi_bfin-wait-for-tx-to-complete-on-write-paths.patch +spi_bfin-headers-are-not-for-changelogs.patch
SPI updates
+kprobes-kretprobe-user-entry-handler-updated.patch
kprobes update
+fuse-fix-attribute-caching-after-create.patch
+fuse-save-space-in-struct-fuse_req.patch
+fuse-limit-queued-background-requests.patch
fuse updates
-restore-jdelvare-i2c-i2c-add-i2c_new_dummy-utility.patch
Unneeded
-rtc-add-support-for-the-s-35390a-rtc-chip.patch -rtc-add-support-for-the-s-35390a-rtc-chip-update.patch -rtc-add-support-for-the-s-35390a-rtc-chip-update2.patch
Dropped
+add-hpet-rtc-emulation-to-rtc_drv_cmos.patch +add-hpet-rtc-emulation-to-rtc_drv_cmos-fix.patch +driver-ip27-rtc-convert-ioctl-to-unlocked_ioctl-v2.patch +rtc-add-support-for-epson-rtc-9701je-v2.patch +rtc-add-support-for-epson-rtc-9701je-v4.patch +rtc-ds1307-ds_1340-change-init.patch +rtc-update-documentation-wrt-irq_set_freq.patch +rtc-cleanup-example-code.patch
RTC updates
+sm501fb-control-panel-pin-usage-with-platform-data-flags.patch +sm501fb-clear-framebuffer-memory-and-palette.patch +atmel_lcdfb-backlight-control.patch +atmel_lcdfb-backlight-control-tiny-rework.patch
+#
+ps3av-ps3av_get_scanmode-and-ps3av_get_refresh_rate-are-unused.patch +ps3-use-symbolic-names-for-video-modes.patch +ps3fb-kill-ps3fb_full_mode_bit.patch +ps3fb-inline-macros-that-are-used-only-once.patch +ps3fb-kill-ps3fb_res.patch +ps3fb-make-frame-buffer-offsets-unsigned-int.patch +ps3fb-add-support-for-configurable-black-borders.patch +ps3fb-reorganize-modedb-handling.patch +ps3fb-round-up-video-modes.patch
+ps3fb-cleanup-sweep.patch
+ps3fb-fix-modedb-typos.patch
+pm2fb-big-endian-fix.patch +fb-sm501-ensure-console-suspended-before-saving-state.patch +fb-s3c2412-add-s3c2412-support-to-s3c2410-fb-driver.patch +fb-s3c2410-update-debugging-in-s3c2410-framebuffer-driver.patch +fb-s3c2410-ensure-s3c2410-framebuffer-clears-initial-memory-to-black.patch +fb-s3c2410-check-default_display-parameter-passed-in-platform-data.patch +#
+fbcon-fix-color-generation-for-monochrome-framebuffer.patch +i810fb-module-parameter-mode_option-inconsistent-with-other-framebuffer-modules.patch
fbdev updates
+md-set-and-test-the-persistent-flag-for-md-devices-more-consistently.patch +md-change-interate_mddev-to-for_each_mddev-fix.patch +md-change-iterate_rdev-to-rdev_for_each-fix.patch +md-fix-an-occasional-deadlock-in-raid5-fix.patch
RAID fixes
+pnp-disable-supermicro-h8dce-motherboard-resources-that-overlap-sata-bars.patch
pnp fix
+bkl-removal-convert-ext2-over-to-use-unlocked_ioctl.patch +bkl-removal-remove-incorrect-bkl-comment-in-ext2.patch +bkl-removal-remove-incorrect-comment-refering-to-lock_kernel-from-jbd-jbd2.patch
bkl removal
+jbdh-hide-kernel-only-code.patch
+ext3-fix-lock-inversion-in-direct-io.patch
+ext3-fix-lock-inversion-in-direct-io-fix.patch
ext3 updates
+keep-track-of-mnt_writer-state-of-struct-file-fix-warn_on.patch +keep-track-of-mnt_writer-state-of-struct-file-fix-warn_on-fix.patch
Fix keep-track-of-mnt_writer-state-of-struct-file.patch
+kernel-doc-prevent-duplicate-description-output.patch +kernel-doc-warn-on-badly-formatted-short-description.patch +email-clientstxt-sylpheed-is-ok-at-imap.patch +doc-use-correct-debugfs-mountpoint.patch
Documentation
+memcontrol-move-mm_cgroup-to-header-file-fix.patch +memcontrol-move-mm_cgroup-to-header-file-fix-2.patch
Fix memcontrol-move-mm_cgroup-to-header-file.patch
+cgroups-update-comments-in-cpusetc.patch
+handle-pid-namespaces-in-cgroups-code.patch
cgroups updates
+drivers-edac-i3000-document-type-promotion.patch
edac fix
+embed-a-struct-path-into-struct-nameidata-instead-of-nd-dentrymnt-cifs-fix.patch +embed-a-struct-path-into-struct-nameidata-instead-of-nd-dentrymnt-smack-fix.patch
More embed-a-struct-path-into-struct-nameidata-instead-of-nd-dentrymnt-checkpatch-fixes.patch fallout
+introduce-path_put-cifs-fix.patch
Fix introduce-path_put.patch
+d_path-make-d_path-use-a-struct-path-fix.patch
Fix d_path-make-d_path-use-a-struct-path.patch
+char-mxser-remove-special-baudrate-processing.patch +char-mxser-0-to-null-in-pointer.patch +char-mxser-reorder-mxser_cardinfo-fields.patch +char-mxser-simplify-mxser_get_serial_info.patch +char-mxser-ioctl-cleanup.patch +char-mxser-remove-it.patch +char-mxser-add-support-for-cp-114ul.patch
serial driver updates
+proc-seqfile-convert-proc_pid_status-to-properly-handle-pid-namespaces-nommu-fix.patch
Fix proc-seqfile-convert-proc_pid_status-to-properly-handle-pid-namespaces.patch again
+wait_task_stopped-simplify-and-fix-races-with-sigcont-sigkill-untrace-fix.patch
Fix wait_task_stopped-simplify-and-fix-races-with-sigcont-sigkill-untrace.patch
+pidns-make-full-use-of-xxx_vnr-calls.patch +pidns-fix-badly-converted-mqueues-pid-handling.patch
PID namespace updates
+rewrite-rd-fix-2.patch
Fix rewrite-rd.patch some more
+udf-cleanup-directory-offset-handling.patch
+udf-fix-adding-entry-to-a-directory.patch
+change-udf-maintainer.patch
UDF updates
+update-checkpatchpl-to-version-013.patch
checkpatch update
+remove-the-unused-exports-of-sys_open--sys_read-for-2625.patch
Remove deprecated exports
+random-clean-up-checkpatch-complaints.patch +random-consolidate-wakeup-logic.patch +random-use-unlocked_ioctl.patch +random-reuse-rand_initialize.patch +random-improve-variable-naming-clear-extract-buffer.patch +random-make-backtracking-attacks-harder.patch +random-remove-cacheline-alignment-for-locks.patch +random-eliminate-redundant-new_rotate-variable.patch +random-remove-some-prefetch-logic.patch +random-simplify-add_ptr-logic.patch +random-make-mixing-interface-byte-oriented.patch +random-simplify-and-rename-credit_entropy_store.patch +random-add-async-notification-support-to-dev-random.patch
random driver updates
+the-scheduled-time-option-removal.patch
Remove "time" boot option
+parport_ieee1284_epp_read_addr-patch.patch +smbios-dmi-add-type-41-=-onboard-devices-extended-information.patch
DMI things
+maintainers-add-haavard-as-maintainer-of-the-atmel_serial-driver.patch +atmel_serial-clean-up-the-code.patch +atmel_serial-use-cpu_relax-when-busy-waiting.patch +atmel_serial-use-existing-console-options-only-if-brg-is-running.patch +atmel_serial-fix-bugs-in-probe-error-path-and-remove.patch +atmel_serial-split-the-interrupt-handler.patch +atmel_serial-add-dma-support.patch +atmel_serial-add-dma-support-fix.patch +atmel_serial-fix-broken-rx-buffer-allocation.patch +atmel_serial-use-container_of-instead-of-direct-cast.patch +atmel_serial-show-tty-name-in-proc-interrupts.patch
atmel_serial updates
+workqueue-make-delayed_work_timer_fn-static.patch +isofs-implement-dmode-option.patch +isofs-implement-dmode-option-fix.patch +reiserfs-constify-function-pointer-tables.patch +procfs-constify-function-pointer-tables.patch +oss-constify-function-pointer-tables.patch
Cleanups
+basic-pwm-driver-for-avr32-and-at91.patch
+basic-pwm-driver-for-avr32-and-at91-fix.patch
+pwm-led-driver.patch
PWM driver
+bkl-removal-convert-pipe-to-use-unlocked_ioctl-too.patch
Cleanup
+remove-__strict_ansi__-from-linux-typesh.patch +kill-do_generic_mapping_read.patch +printk_ratelimit-functions-should-use-config_printk.patch
Cleanups
+avoid-overflows-in-kernel-timec.patch
time management fix
+drop-linux-ufs_fsh-from-userspace-export-and-relocate-it-to-fs-ufs-ufs_fsh.patch
header file cleanup
+mount-options-add-documentation.patch
+mount-options-add-generic_show_options.patch
+mount-options-fix-adfs.patch
+mount-options-fix-affs.patch
+mount-options-fix-afs.patch
+mount-options-fix-autofs4.patch
+mount-options-fix-autofs.patch
+mount-options-fix-befs.patch
+mount-options-fix-capifs.patch
+mount-options-fix-devpts.patch
+mount-options-fix-ext2.patch
+mount-options-fix-fat.patch
+mount-options-fix-fuse.patch
+mount-options-fix-hostfs.patch
+mount-options-fix-hpfs.patch
+mount-options-fix-hugetlbfs.patch
+mount-options-fix-isofs.patch
+mount-options-fix-ncpfs.patch
+mount-options-fix-reiserfs.patch
+mount-options-fix-spufs.patch
+mount-options-fix-tmpfs.patch
+mount-options-fix-tmpfs-fix.patch
+mount-options-fix-udf.patch
Fiddle with mount options
+char-applicom-use-pci_resource_start.patch
+char-applicom-use-pci_match_id.patch
+char-applicom-use-pci_match_id-fix.patch
applicom driver updates
+nbd-remove-limit-on-max-number-of-nbd-devices.patch
nbd update
+vfs-create-proc-pid-mountinfo.patch
Add /proc/<pid>/mountinfo
+mm-bdi-export-bdi-attributes-in-sysfs.patch +mm-bdi-export-bdi-attributes-in-sysfs-fix.patch +mm-bdi-export-bdi-attributes-in-sysfs-fix-2.patch +mm-bdi-export-bdi-attributes-in-sysfs-fix-3.patch +mm-bdi-export-bdi-attributes-in-sysfs-fix-4.patch +mm-bdi-expose-the-bdi-object-in-sysfs-for-nfs.patch +mm-bdi-expose-the-bdi-object-in-sysfs-for-nfs-fix.patch +mm-bdi-expose-the-bdi-object-in-sysfs-for-fuse.patch +mm-bdi-expose-the-bdi-object-in-sysfs-for-fuse-fix.patch +mm-bdi-allow-setting-a-minimum-for-the-bdi-dirty-limit.patch +mm-bdi-allow-setting-a-maximum-for-the-bdi-dirty-limit.patch +mm-bdi-allow-setting-a-maximum-for-the-bdi-dirty-limit-fix.patch +mm-bdi-move-statistics-to-debugfs.patch
Export backing-dev_info things to userspace
+use-find_task_by_vpid-in-posix-timers.patch +use-find_task_by_vpid-in-taskstats.patch +dont-operate-with-pid_t-in-rtmutex-tester.patch +deprecate-find_task_by_pid.patch +remove-aout-interpreter-support-in-elf-loader.patch +use-__u32-in-linux-reiserfs_fsh.patch
Misc
+cpu-fix-section-mismatch-warnings-for-enable_nonboot_cpus.patch +cpu-fix-section-mismatch-related-to-cpu_chain.patch +cpu-do-not-annotate-exported-register_cpu_notifier.patch +cpu-silence-section-mismatch-warnings-for-hotcpu-notifies.patch
CPU management updates
+getdelays-fix-gcc-warnings.patch +add-new-string-functions-strict_strto-and-convert-kernel-params-to-use-them.patch +add-new-string-functions-strict_strto-and-convert-kernel-params-to-use-them-fix.patch +convert-loglevel-related-kernel-boot-parameters-to-early_param.patch
Misc
+reiser4-fix-null-pointer-dereference-in-reiser4_write_extent.patch
reiser4 fix
+page-owner-tracking-leak-detector-broken-on-s390.patch
page-owner-tracking-leak-detector.patch broke on s390
3708 commits in 1565 patch files
All patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/patch-list
Re: 2.6.24-mm1 Build Faliure on pgtable_32.c
Hi Andrew,
The 2.6.24-mm1 kernel build fails with
arch/x86/mm/pgtable_32.c: In function `pgd_mop_up_pmds':arch/x86/mm/pgtable_32.c:302: warning: passing arg 1 of pmd_free' from incompatible pointer type arch/x86/mm/pgtable_32.c:302: error: too few arguments to function pmd_free'
I have tested the patch for the build failure only.
--
arch/x86/mm/~pgtable_32.c renamed from arch/x86/mm/pgtable_32.c +5 -5
@@ -286,7 +286,7 @@ static void pgd_dtor(void *pgd)* preallocate which never got a corresponding vma will need to be * freed manually. */ -static void pgd_mop_up_pmds (pgd_t *pgdp) +static void pgd_mop_up_pmds (struct mm_struct *mm,pgd_t *pgdp) {int i;
@@ -299,7 +299,7 @@ static void pgd_mop_up_pmds(pgd_t *pgdp) pgdp[i] =native_make_pgd (0 );paravirt_release_pd (pgd_val (pgd) >>PAGE_SHIFT ); -pmd_free (pmd); +pmd_free (mm, pmd); } } }
@@ -327,7 +327,7 @@ static int pgd_prepopulate_pmd(struct mmpmd_t *pmd =pmd_alloc_one (mm, addr);if (!pmd) { -pgd_mop_up_pmds (pgd); +pgd_mop_up_pmds (mm, pgd);return 0 ; }
@@ -347,7 +347,7 @@ static int pgd_prepopulate_pmd(struct mm return 1; } -static void pgd_mop_up_pmds (pgd_t *pgd) +static void pgd_mop_up_pmds (struct mm_struct *mm,pgd_t *pgdp) { }#endif /* CONFIG_X86_PAE */
@@ -368,7 +368,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)void pgd_free (struct mm_struct *mm,pgd_t *pgd) { -pgd_mop_up_pmds (pgd); +pgd_mop_up_pmds (mm,pgd);quicklist_free (0 , pgd_dtor, pgd); }
Signature · 10 lines
Thanks & Regards, Kamalesh Babulal, Linux Technology Center, IBM, ISTL. -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Balbir Singh
Acked-byRe: 2.6.24-mm1 Build Faliure on pgtable_32.c
Quoted 11 lines · Kamalesh Babulal
Hi Andrew,
The 2.6.24-mm1 kernel build fails with
arch/x86/mm/pgtable_32.c: In function `pgd_mop_up_pmds':arch/x86/mm/pgtable_32.c:302: warning: passing arg 1 ofpmd_free' from incompatible pointer type arch/x86/mm/pgtable_32.c:302: error: too few arguments to functionpmd_free'I have tested the patch for the build failure only.
Signed-off-by Kamalesh Babulal <[email protected]>
Looks good to me, it seems like a conflict between origin.patch and add-mm-argument-to-pte-pmd-pud-pgd_free.patch
Signature · 10 lines
Warm Regards, Balbir Singh Linux Technology Center IBM, ISTL -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 4 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
- The x86 git tree has been dropped due to runtime failure on one of my test machines
ouch - rather unlucky timing. You updated to a fresh x86.git tree which had this bug for a window of about 103 minutes (according to gitweb). It is fixed in current x86.git.
Ingo
Re: [PATCH] 2.6.24-mm1 section type conflict cleanup
In reply to Andrew MortonHi Andrew,
The 2.6.24-mm1 kernel build fails at many places with section type conflict build error.
drivers/net/typhoon.c:181: error: typhoon_card_info causes a section type conflict make[2]: *** [drivers/net/typhoon.o] Error 1
drivers/net/natsemi.c:245: error: natsemi_pci_info causes a section type conflict make[2]: *** [drivers/net/natsemi.o] Error 1
drivers/net/bnx2.c:95: error: board_info causes a section type conflict make[2]: *** [drivers/net/bnx2.o] Error 1
drivers/net/bnx2x.c:112: error: board_info causes a section type conflict make[2]: *** [drivers/net/bnx2x.o] Error 1
drivers/net/bnx2x.c:112: error: board_info causes a section type conflict make[2]: *** [drivers/net/bnx2x.o] Error 1
drivers/net/via-velocity.c:453: error: velocity_id_table causes a section type conflict make[2]: *** [drivers/net/via-velocity.o] Error 1
drivers/net/starfire.c:350: error: netdrv_tbl causes a section type conflict make[2]: *** [drivers/net/starfire.o] Error 1
I have tested the patch for build test only
--
drivers/net/~typhoon.c renamed from drivers/net/typhoon.c +1 -1
@@ -178,7 +178,7 @@ enum typhoon_cards { };/* directly indexed by enum typhoon_cards, above */ -static const struct typhoon_card_info typhoon_card_info[]__devinitdata = { +static const struct typhoon_card_info typhoon_card_info[]__devinitconst = { {"3Com Typhoon (3C990-TX)" ,TYPHOON_CRYPTO_NONE }, {"3Com Typhoon (3CR990-TX-95)" ,
drivers/net/~natsemi.c renamed from drivers/net/natsemi.c +1 -1
@@ -242,7 +242,7 @@ static const struct {const char *name;unsigned long flags;unsigned int eeprom_size; -} natsemi_pci_info[] __devinitdata = { +} natsemi_pci_info[] __devinitconst = { { "Aculab E1/T1 PMXc cPCI carrier card", NATSEMI_FLAG_IGNORE_PHY, 128 }, { "NatSemi DP8381[56]", 0, 24 }, };
drivers/net/~bnx2.c renamed from drivers/net/bnx2.c +1 -1
@@ -92,7 +92,7 @@ typedef enum {/* indexed by board_t, above */ static const struct {char *name; -} board_info[]__devinitdata = { +} board_info[]__devinitconst = { {"Broadcom NetXtreme II BCM5706 1000Base-T" }, {"HP NC370T Multifunction Gigabit Server Adapter" }, {"HP NC370i Multifunction Gigabit Server Adapter" },
drivers/net/~bnx2.c renamed from drivers/net/bnx2.c +1 -1
@@ -104,7 +104,7 @@ static const struct { { "Broadcom NetXtreme II BCM5709 1000Base-SX" }, }; -static struct pci_device_id bnx2_pci_tbl[] = { +static struct pci_device_id bnx2_pci_tbl[] __devinitconst = { { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, PCI_VENDOR_ID_HP, 0x3101, 0, 0, NC370T }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706,
drivers/net/~bnx2x.c renamed from drivers/net/bnx2x.c +1 -1
@@ -109,7 +109,7 @@ enum bnx2x_board_type {/* indexed by board_t, above */ static const struct {char *name; -} board_info[]__devinitdata = { +} board_info[]__devinitconst = { {"Broadcom NetXtreme II BCM57710 XGb" } };
drivers/net/~starfire.c renamed from drivers/net/starfire.c +1 -1
@@ -347,7 +347,7 @@ MODULE_DEVICE_TABLE(pci, starfire_pci_tbstatic const struct chip_info {const char *name;int drv_flags; -} netdrv_tbl[]__devinitdata = { +} netdrv_tbl[]__devinitconst = { {"Adaptec Starfire 6915" , CanHaveMII }, };
drivers/net/~via-velocity.c renamed from drivers/net/via-velocity.c +1 -1
@@ -450,7 +450,7 @@ static const struct velocity_info_tbl ch* device driver. Used for hotplug autoloading. */ -static const struct pci_device_id velocity_id_table[]__devinitdata = { +static const struct pci_device_id velocity_id_table[]__devinitconst = { {PCI_DEVICE (PCI_VENDOR_ID_VIA ,PCI_DEVICE_ID_VIA_612X ) }, { } };
Signature · 4 lines
Thanks & Regards, Kamalesh Babulal, Linux Technology Center, IBM, ISTL.
Re: [PATCH] 2.6.24-mm1 section type conflict cleanup
Quoted 4 lines · Kamalesh Babulal
Hi Andrew,
The 2.6.24-mm1 kernel build fails at many places with section type conflict build error.
What arch?
We have troubles with powerpc as pointed out by Al in another thread.
Sam
Re: [PATCH] 2.6.24-mm1 section type conflict cleanup
Quoted 10 lines · Sam Ravnborg
Quoted 4 lines · Kamalesh Babulal
Hi Andrew,
The 2.6.24-mm1 kernel build fails at many places with section type conflict build error.
What arch?
We have troubles with powerpc as pointed out by Al in another thread.Sam
Hi Sam,
This clean up is done for the powerpc, sorry forgot to mention it.
Signature · 4 lines
Thanks & Regards, Kamalesh Babulal, Linux Technology Center, IBM, ISTL.
Re: 2.6.24-mm1: ppc32: too few arguments to function 'reserve_bootmem'
In reply to Andrew MortonHello,
This is from ppc32:
CC arch/powerpc/mm/mem.oarch/powerpc/mm/mem.c: In function 'do_init_bootmem':arch/powerpc/mm/mem.c:256: error: too few arguments to function 'reserve_bootmem' arch/powerpc/mm/mem.c:261: error: too few arguments to function 'reserve_bootmem'
Leftover from introduce-flags-for-reserve_bootmem.patch?
Regards,
Mariusz
Andrew Morton
maintainerRe: 2.6.24-mm1: ppc32: too few arguments to function 'reserve_bootmem'
Quoted 11 lines · On Mon, 4 Feb 2008 21:29:02 +0100 Mariusz Kozlowski <[email protected]>…
Hello,
This is from ppc32:
CC
arch/powerpc/mm/mem.oarch/powerpc/mm/mem.c: In function 'do_init_bootmem':arch/powerpc/mm/mem.c:256: error: too few arguments to function 'reserve_bootmem'arch/powerpc/mm/mem.c:261: error: too few arguments to function 'reserve_bootmem'Leftover from introduce-flags-for-reserve_bootmem.patch?
Yes, I've had to fix that patch many times.
arch/powerpc/mm/mem.c renamed from arch/powerpc/mm/mem.c~introduce-flags-for-reserve_bootmem-powerpc-fix +3 -2
@@ -253,12 +253,13 @@ void __init do_init_bootmem(void)lmb_size_bytes (&lmb.reserved, i) -1 ;if (addr < total_lowmem)reserve_bootmem (lmb.reserved.region[i].base, -lmb_size_bytes (&lmb.reserved, i)); +lmb_size_bytes (&lmb.reserved, i), +BOOTMEM_DEFAULT );else if (lmb.reserved.region[i].base < total_lowmem) {unsigned long adjusted_size = total_lowmem - lmb.reserved.region[i].base;reserve_bootmem (lmb.reserved.region[i].base, - adjusted_size); + adjusted_size,BOOTMEM_DWEFAULT ); } }#else
_
We did this wrong. We should have introduced a new reserve_bootmem_foo() and migrated over to that in stages. Once all callers are migrated, remove the old interface.
Re: 2.6.24-mm1: ppc32: too few arguments to function 'reserve_bootmem'
Hello.
Quoted 16 lines · Andrew Morton
Quoted 8 lines
This is from ppc32:
CC
arch/powerpc/mm/mem.oarch/powerpc/mm/mem.c: In function 'do_init_bootmem':arch/powerpc/mm/mem.c:256: error: too few arguments to function 'reserve_bootmem'arch/powerpc/mm/mem.c:261: error: too few arguments to function 'reserve_bootmem'Leftover from introduce-flags-for-reserve_bootmem.patch?
Yes, I've had to fix that patch many times.
arch/powerpc/mm/mem.c renamed from arch/powerpc/mm/mem.c~introduce-flags-for-reserve_bootmem-powerpc-fix +0
-0@@ -253,12 +253,13 @@ void __init do_init_bootmem(void)lmb_size_bytes (&lmb.reserved, i) -1 ;if (addr < total_lowmem)
arch/powerpc/mm/mem.c void __init do_init_bootmem(void) · line 262
Quoted 10 lines
arch/powerpc/mm/mem.c renamed from arch/powerpc/mm/mem.c~introduce-flags-for-reserve_bootmem-powerpc-fix +3
-2reserve_bootmem (lmb.reserved.region[i].base, -lmb_size_bytes (&lmb.reserved, i)); +lmb_size_bytes (&lmb.reserved, i), +BOOTMEM_DEFAULT ); else if (lmb.reserved.region[i].base < total_lowmem) {unsigned long adjusted_size = total_lowmem - lmb.reserved.region[i].base;reserve_bootmem (lmb.reserved.region[i].base, - adjusted_size); + adjusted_size,BOOTMEM_DWEFAULT );
BOOTMEM_DWEFAULT, are you sure? :-)
WBR, Sergei
Re: 2.6.24-mm1: ppc32: too few arguments to function 'reserve_bootmem'
In reply to Andrew MortonQuoted 3 lines · Andrew Morton
We did this wrong. We should have introduced a new
reserve_bootmem_foo()and migrated over to that in stages. Once all callers are migrated, remove the old interface.
Well, my original proposal was to add a new function but then someone complained that we already have too much bootmem functions. I don't remember if this was on LKML or internally in Bugzilla.
However, sorry, it was my fault of course.
Bernhard
Re: 2.6.24-mm1: module params broken
In reply to Andrew MortonPlease chuck out:
add-new-string-functions-strict_strto-and-convert-kernel-params-to-use-them.patch (along with Randy's perfectly reasonable -fix.patch).
So predictable that it would just disable loading modules with params:
Feb 4 13:17:02 blonde kernel: thinkpad_acpi: `1' invalid for parameter `experimental'
Maybe it's something as simple as a trailing whitespace issue, I haven't looked, would prefer the originator to do so. openSUSE 10.3 if that makes any difference.
Hugh
Andrew Morton
maintainerRe: 2.6.24-mm1: module params broken
Quoted 11 lines · On Mon, 4 Feb 2008 21:56:54 +0000 (GMT) Hugh Dickins <[email protected]> wrote:
Please chuck out:
add-new-string-functions-strict_strto-and-convert-kernel-params-to-use-them.patch (along with Randy's perfectly reasonable -fix.patch).So predictable that it would just disable loading modules with params:
Feb 4 13:17:02 blonde kernel: thinkpad_acpi: `1' invalid for parameter `experimental'Maybe it's something as simple as a trailing whitespace issue, I haven't looked, would prefer the originator to do so. openSUSE 10.3 if that makes any difference.
Takashi found a bug in it:
lib/vsprintf.c renamed from lib/vsprintf.c~add-new-string-functions-strict_strto-and-convert-kernel-params-to-use-them-fix-2 +1 -1
@@ -234,7 +234,7 @@ int strict_strto##type(const char *cp, uif (ret !=0 ) \ *res = -(*res); \ } else \ - ret = strict_strtou##type(cp+1, base, res); \ + ret = strict_strtou##type(cp, base, res); \ \ return ret; \ } \
_
and I was very bad and didn't immediately prepare and upload the fix and hence probably wasted a lot of your time, for which I apologise. In my defense, it was 4:00AM Sunday and I had lost eye control by then.
Does that fix fix it? If not: patch overboard.
Re: 2.6.24-mm1: module params broken
Quoted 2 lines · Andrew Morton
Takashi found a bug in it:
Bless him.
Quoted 13 lines
lib/vsprintf.c renamed from lib/vsprintf.c~add-new-string-functions-strict_strto-and-convert-kernel-params-to-use-them-fix-2 +1
-1@@ -234,7 +234,7 @@ int strict_strto##type(const char *cp, uif (ret !=0 ) \ *res = -(*res); \ } else \ - ret = strict_strtou##type(cp+1, base, res); \ + ret = strict_strtou##type(cp, base, res); \ \ return ret; \ } \_
Quoted 3 lines
and I was very bad and didn't immediately prepare and upload the fix and hence probably wasted a lot of your time, for which I apologise. In my defense, it was 4:00AM Sunday and I had lost eye control by then.
Please don't even begin to think of apologizing to me:
that's so much the wrong way round it's embarrassing.
It's scary to think of how much of your time gets wasted on knocking these -mms into some kind of shape that's then ready for the rest of us to start attacking them.
Quoted 1 line
Does that fix fix it? If not: patch overboard.
Reprieve! Indeed that precisely fixes it: numerous modules now working again with that fix. Thanks a lot.
Hugh
Andrew Morton
maintainerRe: 2.6.24-mm1: module params broken
Quoted 19 lines · On Tue, 5 Feb 2008 00:06:39 +0000 (GMT) Hugh Dickins <[email protected]> wrote:
Quoted 2 lines · Andrew Morton
Takashi found a bug in it:
Bless him.
Quoted 13 lines
lib/vsprintf.c renamed from lib/vsprintf.c~add-new-string-functions-strict_strto-and-convert-kernel-params-to-use-them-fix-2 +1
-1@@ -234,7 +234,7 @@ int strict_strto##type(const char *cp, uif (ret !=0 ) \ *res = -(*res); \ } else \ - ret = strict_strtou##type(cp+1, base, res); \ + ret = strict_strtou##type(cp, base, res); \ \ return ret; \ } \_
Quoted 6 lines
Quoted 3 lines
and I was very bad and didn't immediately prepare and upload the fix and hence probably wasted a lot of your time, for which I apologise. In my defense, it was 4:00AM Sunday and I had lost eye control by then.
Please don't even begin to think of apologizing to me:
that's so much the wrong way round it's embarrassing.
three minutes saved here led to maybe an hour lost there.
Quoted 3 lines
It's scary to think of how much of your time gets wasted on knocking these -mms into some kind of shape that's then ready for the rest of us to start attacking them.
Well yeah. Three minutes saved there (* 1000) led to maybe 1000 hours lost here. Kernel economics :(
Quoted 4 lines
Quoted 1 line
Does that fix fix it? If not: patch overboard.
Reprieve! Indeed that precisely fixes it: numerous modules now working again with that fix. Thanks a lot.
Thanks.
Re: 2.6.24-mm1 - build error, AMD MCE using Intel ifdef'd log function
In reply to Andrew MortonQuoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
arch/x86/kernel/built-in.o: In function `amd_smp_thermal_interrupt':
(.text+0xe7c4): undefined reference to `mce_log_therm_throt_event'
make: *** [.tmp_vmlinux1] Error 1
I looked in MAINTAINERS for MCE, MACHINE and CHECK, but didn't spot any likely entries to CC.
Signature · 1 line
Zan Lynx <[email protected]>
Andrew Morton
maintainerRe: 2.6.24-mm1 - build error, AMD MCE using Intel ifdef'd log function
Quoted 6 lines · On Mon, 04 Feb 2008 15:23:50 -0700 Zan Lynx <[email protected]> wrote:
Quoted 3 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
Quoted 6 lines
arch/x86/kernel/built-in.o: In function `amd_smp_thermal_interrupt':
(.text+0xe7c4): undefined reference to `mce_log_therm_throt_event'
make: *** [.tmp_vmlinux1] Error 1I looked in
MAINTAINERSfor MCE, MACHINE and CHECK, but didn't spot any likely entries to CC.
Thanks. That'll be Russell's x86-amd-thermal-interrupt-support-fix-2.patch.
It looks like that patch is due for a serious overhaul so I think I'll just drop the version whcih is in -mm, OK?
Re: 2.6.24-mm1 - Build failure at net/sched/cls_flow.c:598
In reply to Andrew MortonMy attempt to build this failed with:
CC [M] net/sched/cls_flow.onet/sched/cls_flow.c: In function ‘flow_dump’:net/sched/cls_flow.c:598: error: ‘struct tcf_ematch_tree’ has no member named ‘hdr’
Config attached.
HTH
T.
Signature · 4 lines
Tilman Schmidt E-Mail: [email protected] Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.24-mm1
# Mon Feb 4 15:54:07 2008
#
# CONFIG_64BIT is not setCONFIG_X86_32=y
# CONFIG_X86_64 is not setCONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_QUICKLIST=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=yCONFIG_X86_SMP=yCONFIG_X86_32_SMP=yCONFIG_X86_HT=yCONFIG_X86_BIOS_REBOOT=yCONFIG_X86_TRAMPOLINE=yCONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION="-testing"CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not setCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=yCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not setCONFIG_FAIR_GROUP_SCHED=yCONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not setCONFIG_RELAY=yCONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_MARKERS=yCONFIG_OPROFILE=mCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_KPROBES=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_KMOD=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_LBD=yCONFIG_BLK_DEV_IO_TRACE=yCONFIG_LSF=yCONFIG_BLK_DEV_BSG=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not setCONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_CLASSIC_RCU is not setCONFIG_PREEMPT_RCU=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP=yCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not setCONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=yCONFIG_PARAVIRT_GUEST=yCONFIG_XEN=yCONFIG_VMI=y
# CONFIG_LGUEST_GUEST is not setCONFIG_PARAVIRT=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not setCONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=7CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_TSC=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=4CONFIG_X86_DEBUGCTLMSR=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=y
# CONFIG_IOMMU_HELPER is not setCONFIG_NR_CPUS=8CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_RCU_TRACE=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=yCONFIG_X86_MCE_P4THERMAL=yCONFIG_VM86=yCONFIG_TOSHIBA=mCONFIG_I8K=mCONFIG_X86_REBOOTFIXUPS=yCONFIG_MICROCODE=mCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=mCONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=yCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not setCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not setCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_NR_QUICK=1CONFIG_VIRT_TO_BUS=yCONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_IRQBALANCE is not setCONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x100000CONFIG_RELOCATABLE=yCONFIG_PHYSICAL_ALIGN=0x100000CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#CONFIG_PM=y
# CONFIG_PM_LEGACY is not setCONFIG_PM_DEBUG=yCONFIG_PM_VERBOSE=yCONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_PROCFS=yCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=mCONFIG_ACPI_DOCK=mCONFIG_ACPI_BAY=mCONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not setCONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=2001CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=mCONFIG_ACPI_SBS=m
# CONFIG_APM is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#CONFIG_X86_ACPI_CPUFREQ=mCONFIG_X86_POWERNOW_K6=mCONFIG_X86_POWERNOW_K7=mCONFIG_X86_POWERNOW_K7_ACPI=yCONFIG_X86_POWERNOW_K8=mCONFIG_X86_POWERNOW_K8_ACPI=yCONFIG_X86_GX_SUSPMOD=mCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=yCONFIG_X86_SPEEDSTEP_ICH=mCONFIG_X86_SPEEDSTEP_SMI=mCONFIG_X86_P4_CLOCKMOD=mCONFIG_X86_CPUFREQ_NFORCE2=mCONFIG_X86_LONGRUN=mCONFIG_X86_LONGHAUL=mCONFIG_X86_E_POWERSAVER=m
#
# shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=mCONFIG_PCIEAER=yCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not setCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=mCONFIG_K8_NB=y
# CONFIG_PCCARD is not setCONFIG_HOTPLUG_PCI=mCONFIG_HOTPLUG_PCI_FAKE=mCONFIG_HOTPLUG_PCI_ACPI=mCONFIG_HOTPLUG_PCI_ACPI_IBM=mCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=mCONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_MISC=m
#
# Networking
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=mCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=mCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_NET_KEY=mCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=mCONFIG_INET_LRO=mCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=mCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not setCONFIG_DEFAULT_RENO=yCONFIG_DEFAULT_TCP_CONG="reno"CONFIG_TCP_MD5SIG=yCONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not setCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=mCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=mCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=mCONFIG_IPV6_SIT=mCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_MULTIPLE_TABLES=yCONFIG_IPV6_SUBTREES=yCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NF_CONNTRACK=mCONFIG_NF_CT_ACCT=yCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_EVENTS=yCONFIG_NF_CT_PROTO_GRE=mCONFIG_NF_CT_PROTO_SCTP=mCONFIG_NF_CT_PROTO_UDPLITE=mCONFIG_NF_CONNTRACK_AMANDA=mCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_PPTP=mCONFIG_NF_CONNTRACK_SANE=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=mCONFIG_NF_CT_NETLINK=mCONFIG_NETFILTER_XTABLES=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NOTRACK=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=mCONFIG_NETFILTER_XT_MATCH_TIME=mCONFIG_NETFILTER_XT_MATCH_U32=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV4=mCONFIG_NF_CONNTRACK_PROC_COMPAT=yCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_RECENT=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PROTO_GRE=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_TFTP=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_NF_NAT_SIP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV6=mCONFIG_IP6_NF_QUEUE=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#CONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=mCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=mCONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not setCONFIG_IP_DCCP_CCID3_RTO=100CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not setCONFIG_ATM=mCONFIG_ATM_CLIP=mCONFIG_ATM_CLIP_NO_ICMP=yCONFIG_ATM_LANE=mCONFIG_ATM_MPOA=mCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_BRIDGE=mCONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not setCONFIG_LLC=mCONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not setCONFIG_X25=mCONFIG_LAPB=m
# CONFIG_ECONET is not setCONFIG_WAN_ROUTER=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RR=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=mCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not setCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_NAT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not setCONFIG_NET_SCH_FIFO=y
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NET_TCPPROBE=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not setCONFIG_IRDA=m
#
# IrDA protocols
#CONFIG_IRLAN=mCONFIG_IRNET=mCONFIG_IRCOMM=mCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=m
#
# Dongle support
#CONFIG_DONGLE=yCONFIG_ESI_DONGLE=mCONFIG_ACTISYS_DONGLE=mCONFIG_TEKRAM_DONGLE=mCONFIG_TOIM3232_DONGLE=mCONFIG_LITELINK_DONGLE=mCONFIG_MA600_DONGLE=mCONFIG_GIRBIL_DONGLE=mCONFIG_MCP2120_DONGLE=mCONFIG_OLD_BELKIN_DONGLE=mCONFIG_ACT200L_DONGLE=mCONFIG_KINGSUN_DONGLE=mCONFIG_KSDAZZLE_DONGLE=mCONFIG_KS959_DONGLE=m
#
# FIR device drivers
#CONFIG_USB_IRDA=mCONFIG_SIGMATEL_FIR=mCONFIG_NSC_FIR=mCONFIG_WINBOND_FIR=mCONFIG_TOSHIBA_FIR=mCONFIG_SMC_IRCC_FIR=mCONFIG_ALI_FIR=mCONFIG_VLSI_FIR=mCONFIG_VIA_FIR=mCONFIG_MCS_FIR=mCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=mCONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIUSB=mCONFIG_BT_HCIUSB_SCO=yCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIVHCI=mCONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not setCONFIG_RXKAD=mCONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not setCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
# CONFIG_MTD is not setCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=mCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=mCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not setCONFIG_BLK_CPQ_DA=mCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=64000CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not setCONFIG_ATA_OVER_ETH=mCONFIG_XEN_BLKDEV_FRONTEND=yCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not setCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_FJKEYINF is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=mCONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not setCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=mCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_ACARD=mCONFIG_SCSI_AACRAID=mCONFIG_SCSI_AIC7XXX=mCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=mCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC94XX=mCONFIG_AIC94XX_DEBUG=yCONFIG_SCSI_DPT_I2O=mCONFIG_SCSI_ADVANSYS=mCONFIG_SCSI_ARCMSR=mCONFIG_SCSI_ARCMSR_AER=yCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=mCONFIG_MEGARAID_MAILBOX=mCONFIG_MEGARAID_LEGACY=mCONFIG_MEGARAID_SAS=mCONFIG_SCSI_HPTIOP=mCONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not setCONFIG_SCSI_DMX3191D=mCONFIG_SCSI_EATA=mCONFIG_SCSI_EATA_TAGGED_QUEUE=yCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=mCONFIG_SCSI_IPS=mCONFIG_SCSI_INITIO=mCONFIG_SCSI_INIA100=m
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not setCONFIG_SCSI_STEX=mCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=mCONFIG_SCSI_IPR_TRACE=yCONFIG_SCSI_IPR_DUMP=yCONFIG_SCSI_QLOGIC_1280=mCONFIG_SCSI_QLA_FC=mCONFIG_SCSI_QLA_ISCSI=mCONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=mCONFIG_SCSI_DC390T=mCONFIG_SCSI_NSP32=mCONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_SRP is not setCONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_ACPI=yCONFIG_SATA_AHCI=mCONFIG_SATA_SVW=mCONFIG_ATA_PIIX=mCONFIG_SATA_MV=mCONFIG_SATA_NV=mCONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SX4=mCONFIG_SATA_SIL=mCONFIG_SATA_SIL24=mCONFIG_SATA_SIS=mCONFIG_SATA_ULI=mCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=mCONFIG_SATA_INIC162X=mCONFIG_PATA_ACPI=mCONFIG_PATA_ALI=mCONFIG_PATA_AMD=mCONFIG_PATA_ARTOP=mCONFIG_PATA_ATIIXP=mCONFIG_PATA_CMD640_PCI=mCONFIG_PATA_CMD64X=mCONFIG_PATA_CS5520=mCONFIG_PATA_CS5530=mCONFIG_PATA_CS5535=mCONFIG_PATA_CS5536=mCONFIG_PATA_CYPRESS=mCONFIG_PATA_EFAR=mCONFIG_ATA_GENERIC=mCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=mCONFIG_PATA_HPT3X2N=mCONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not setCONFIG_PATA_IT821X=mCONFIG_PATA_IT8213=mCONFIG_PATA_JMICRON=mCONFIG_PATA_TRIFLEX=mCONFIG_PATA_MARVELL=mCONFIG_PATA_MPIIX=mCONFIG_PATA_OLDPIIX=mCONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not setCONFIG_PATA_NS87410=mCONFIG_PATA_NS87415=mCONFIG_PATA_OPTI=mCONFIG_PATA_OPTIDMA=mCONFIG_PATA_PDC_OLD=mCONFIG_PATA_RADISYS=mCONFIG_PATA_RZ1000=mCONFIG_PATA_SC1200=mCONFIG_PATA_SERVERWORKS=mCONFIG_PATA_PDC2027X=mCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=mCONFIG_PATA_VIA=mCONFIG_PATA_WINBOND=mCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_RAID5_RESHAPE=yCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_EMC=mCONFIG_DM_MULTIPATH_RDAC=mCONFIG_DM_MULTIPATH_HP=mCONFIG_DM_DELAY=mCONFIG_DM_UEVENT=yCONFIG_FUSION=yCONFIG_FUSION_SPI=mCONFIG_FUSION_FC=mCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=mCONFIG_FUSION_LAN=mCONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not setCONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#CONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_OHCI1394=m
#
# Protocols
#CONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not setCONFIG_IEEE1394_ETH1394_ROM_ENTRY=yCONFIG_IEEE1394_ETH1394=mCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_RAWIO=mCONFIG_I2O=mCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=yCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=mCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_NETDEVICES_MULTIQUEUE=yCONFIG_IFB=mCONFIG_DUMMY=mCONFIG_BONDING=m
# CONFIG_MACVLAN is not setCONFIG_EQUALIZER=mCONFIG_TUN=mCONFIG_VETH=yCONFIG_NET_SB1000=m
# CONFIG_ARCNET is not setCONFIG_PHYLIB=m
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=mCONFIG_QSEMI_PHY=mCONFIG_LXT_PHY=mCONFIG_CICADA_PHY=mCONFIG_VITESSE_PHY=mCONFIG_SMSC_PHY=mCONFIG_BROADCOM_PHY=mCONFIG_ICPLUS_PHY=mCONFIG_REALTEK_PHY=mCONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=mCONFIG_NET_ETHERNET=yCONFIG_MII=mCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=mCONFIG_CASSINI=mCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=mCONFIG_TYPHOON=mCONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not setCONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not setCONFIG_TULIP_NAPI=yCONFIG_TULIP_NAPI_HW_MITIGATION=yCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_HP100=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not setCONFIG_NET_PCI=yCONFIG_PCNET32=mCONFIG_PCNET32_NAPI=yCONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not setCONFIG_ADAPTEC_STARFIRE=mCONFIG_ADAPTEC_STARFIRE_NAPI=yCONFIG_B44=mCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=yCONFIG_FORCEDETH=mCONFIG_FORCEDETH_NAPI=yCONFIG_EEPRO100=mCONFIG_E100=mCONFIG_FEALNX=mCONFIG_NATSEMI=mCONFIG_NE2K_PCI=mCONFIG_8139CP=mCONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not setCONFIG_SIS900=mCONFIG_EPIC100=mCONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not setCONFIG_TLAN=mCONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not setCONFIG_VIA_RHINE_NAPI=yCONFIG_SC92031=mCONFIG_NET_POCKET=yCONFIG_ATP=mCONFIG_DE600=mCONFIG_DE620=mCONFIG_NETDEV_1000=yCONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not setCONFIG_DL2K=mCONFIG_E1000=mCONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not setCONFIG_E1000E=mCONFIG_E1000E_ENABLED=yCONFIG_IP1000=mCONFIG_IGB=mCONFIG_NS83820=mCONFIG_HAMACHI=mCONFIG_YELLOWFIN=mCONFIG_R8169=mCONFIG_R8169_NAPI=yCONFIG_R8169_VLAN=yCONFIG_SIS190=mCONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not setCONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not setCONFIG_SK98LIN=mCONFIG_VIA_VELOCITY=mCONFIG_TIGON3=mCONFIG_BNX2=mCONFIG_QLA3XXX=mCONFIG_ATL1=m
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=mCONFIG_USB_NET_DM9601=mCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=mCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=mCONFIG_WAN=yCONFIG_LANMEDIA=mCONFIG_HDLC=mCONFIG_HDLC_RAW=mCONFIG_HDLC_RAW_ETH=mCONFIG_HDLC_CISCO=mCONFIG_HDLC_FR=mCONFIG_HDLC_PPP=mCONFIG_HDLC_X25=mCONFIG_PCI200SYN=mCONFIG_WANXL=m
# CONFIG_PC300 is not setCONFIG_PC300TOO=mCONFIG_FARSYNC=m
# CONFIG_DSCC4 is not setCONFIG_DLCI=mCONFIG_DLCI_MAX=8
# CONFIG_WAN_ROUTER_DRIVERS is not setCONFIG_LAPBETHER=mCONFIG_X25_ASY=m
# CONFIG_SBNI is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=mCONFIG_ATM_TCP=mCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=mCONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not setCONFIG_ATM_NICSTAR=mCONFIG_ATM_NICSTAR_USE_SUNI=yCONFIG_ATM_NICSTAR_USE_IDT77105=yCONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not setCONFIG_ATM_IDT77252_RCV_ALL=yCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not setCONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not setCONFIG_ATM_FORE200E_MAYBE=mCONFIG_ATM_FORE200E_PCA=yCONFIG_ATM_FORE200E_PCA_DEFAULT_FW=yCONFIG_ATM_FORE200E_USE_TASKLET=yCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_FORE200E=mCONFIG_ATM_HE=mCONFIG_ATM_HE_USE_SUNI=yCONFIG_XEN_NETDEV_FRONTEND=yCONFIG_FDDI=y
# CONFIG_DEFXX is not setCONFIG_SKFP=mCONFIG_HIPPI=yCONFIG_ROADRUNNER=mCONFIG_ROADRUNNER_LARGE_RINGS=yCONFIG_PLIP=mCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=mCONFIG_PPPOATM=mCONFIG_PPPOL2TP=mCONFIG_SLIP=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=mCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_NET_FC=yCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_ISDN=mCONFIG_ISDN_I4L=mCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=yCONFIG_ISDN_MPP=yCONFIG_IPPP_FILTER=yCONFIG_ISDN_PPP_BSDCOMP=mCONFIG_ISDN_AUDIO=yCONFIG_ISDN_TTY_FAX=yCONFIG_ISDN_X25=y
#
# ISDN feature submodules
#CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active cards
#CONFIG_ISDN_DRV_GIGASET=mCONFIG_GIGASET_BASE=mCONFIG_GIGASET_M105=mCONFIG_GIGASET_M101=mCONFIG_GIGASET_DEBUG=yCONFIG_GIGASET_UNDOCREQ=yCONFIG_ISDN_CAPI=mCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=yCONFIG_CAPI_TRACE=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_CAPIFS_BOOL=yCONFIG_ISDN_CAPI_CAPIFS=mCONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
# CONFIG_CAPI_EICON is not setCONFIG_PHONE=mCONFIG_PHONE_IXJ=m
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not setCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_VSXXXAA is not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=mCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=mCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=mCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=mCONFIG_JOYSTICK_DB9=mCONFIG_JOYSTICK_GAMECON=mCONFIG_JOYSTICK_TURBOGRAFX=mCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=mCONFIG_TABLET_USB_AIPTEK=mCONFIG_TABLET_USB_GTCO=mCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_WACOM=mCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_ADS7846=mCONFIG_TOUCHSCREEN_FUJITSU=mCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_MK712=mCONFIG_TOUCHSCREEN_PENMOUNT=mCONFIG_TOUCHSCREEN_TOUCHRIGHT=mCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_UCB1400=mCONFIG_TOUCHSCREEN_USB_COMPOSITE=mCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not setCONFIG_INPUT_WISTRON_BTNS=mCONFIG_INPUT_ATLAS_BTNS=mCONFIG_INPUT_ATI_REMOTE=mCONFIG_INPUT_ATI_REMOTE2=mCONFIG_INPUT_KEYSPAN_REMOTE=mCONFIG_INPUT_POWERMATE=mCONFIG_INPUT_YEALINK=mCONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_SERIAL_NONSTANDARD=yCONFIG_COMPUTONE=mCONFIG_ROCKETPORT=mCONFIG_CYCLADES=mCONFIG_CYZ_INTR=yCONFIG_DIGIEPCA=mCONFIG_MOXA_INTELLIO=mCONFIG_MOXA_SMARTIO=mCONFIG_ISI=mCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=mCONFIG_N_HDLC=mCONFIG_RISCOM8=mCONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not setCONFIG_SX=mCONFIG_RIO=mCONFIG_RIO_OLDPCI=yCONFIG_STALDRV=y
# CONFIG_NOZOMI is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=8CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=64CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_HVC_DRIVER=yCONFIG_HVC_XEN=yCONFIG_IPMI_HANDLER=mCONFIG_IPMI_PANIC_EVENT=yCONFIG_IPMI_PANIC_STRING=yCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_GEODE=mCONFIG_HW_RANDOM_VIA=mCONFIG_NVRAM=mCONFIG_RTC=yCONFIG_R3964=mCONFIG_APPLICOM=mCONFIG_SONYPI=mCONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=mCONFIG_NSC_GPIO=mCONFIG_CS5535_GPIO=mCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=4096CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not setCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=mCONFIG_TCG_TPM=mCONFIG_TCG_TIS=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=mCONFIG_TELCLOCK=mCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=mCONFIG_I2C_I801=mCONFIG_I2C_I810=mCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_OCORES=mCONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_PROSAVAGE=mCONFIG_I2C_SAVAGE4=mCONFIG_I2C_SIMTEC=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not setCONFIG_I2C_STUB=mCONFIG_I2C_TINY_USB=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=mCONFIG_I2C_VOODOO3=m
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=mCONFIG_SENSORS_EEPROM=mCONFIG_SENSORS_PCF8574=mCONFIG_PCF8575=mCONFIG_SENSORS_PCA9539=mCONFIG_SENSORS_PCF8591=mCONFIG_TPS65010=mCONFIG_SENSORS_MAX6875=mCONFIG_SENSORS_TSL2550=mCONFIG_OZ99X=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#CONFIG_SPI=yCONFIG_SPI_DEBUG=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_LM70_LLP is not set
#
# SPI Protocol Masters
#CONFIG_SPI_AT25=mCONFIG_SPI_SPIDEV=mCONFIG_SPI_TLE62X0=mCONFIG_W1=mCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=mCONFIG_W1_MASTER_DS2490=mCONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=mCONFIG_W1_SLAVE_SMEM=mCONFIG_W1_SLAVE_DS2433=mCONFIG_W1_SLAVE_DS2433_CRC=yCONFIG_W1_SLAVE_DS2760=mCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not setCONFIG_HWMON=mCONFIG_HWMON_VID=mCONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=mCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7473=mCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_ASB100=mCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_FSCHER=mCONFIG_SENSORS_FSCPOS=mCONFIG_SENSORS_FSCHMD=mCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_CORETEMP=mCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM70=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_THMC50=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_HDAPS=mCONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not setCONFIG_THERMAL=yCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not setCONFIG_WATCHDOG_CORE=m
# CONFIG_WATCHDOG_DEBUG_CORE is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_SC520_WDT=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=mCONFIG_IBMASR=mCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=mCONFIG_ITCO_WDT=mCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=mCONFIG_HP_WATCHDOG=mCONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=mCONFIG_PC87413_WDT=mCONFIG_60XX_WDT=mCONFIG_SBC8360_WDT=mCONFIG_SBC7240_WDT=mCONFIG_CPU5_WDT=mCONFIG_SMSC37B787_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83697HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=mCONFIG_SBC_EPX_C3_WATCHDOG=m
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=mCONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#CONFIG_SSB_POSSIBLE=yCONFIG_SSB=mCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#CONFIG_MFD_SM501=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=mCONFIG_AGP_ALI=mCONFIG_AGP_ATI=mCONFIG_AGP_AMD=mCONFIG_AGP_AMD64=mCONFIG_AGP_INTEL=mCONFIG_AGP_NVIDIA=mCONFIG_AGP_SIS=mCONFIG_AGP_SWORKS=mCONFIG_AGP_VIA=mCONFIG_AGP_EFFICEON=mCONFIG_DRM=mCONFIG_DRM_TDFX=mCONFIG_DRM_R128=mCONFIG_DRM_RADEON=mCONFIG_DRM_I810=mCONFIG_DRM_I830=mCONFIG_DRM_I915=mCONFIG_DRM_MGA=mCONFIG_DRM_SIS=mCONFIG_DRM_VIA=mCONFIG_DRM_SAVAGE=mCONFIG_VGASTATE=mCONFIG_VIDEO_OUTPUT_CONTROL=mCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=mCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=mCONFIG_FB_SYS_COPYAREA=mCONFIG_FB_SYS_IMAGEBLIT=mCONFIG_FB_SYS_FOPS=mCONFIG_FB_DEFERRED_IO=yCONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_CIRRUS=mCONFIG_FB_PM2=mCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=mCONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not setCONFIG_FB_IMSTT=yCONFIG_FB_VGA16=mCONFIG_FB_UVESA=mCONFIG_FB_VESA=yCONFIG_FB_EFI=yCONFIG_FB_HECUBA=mCONFIG_FB_HGA=mCONFIG_FB_HGA_ACCEL=yCONFIG_FB_S1D13XXX=mCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not setCONFIG_FB_NVIDIA_BACKLIGHT=yCONFIG_FB_RIVA=mCONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not setCONFIG_FB_RIVA_BACKLIGHT=yCONFIG_FB_I810=mCONFIG_FB_I810_GTF=yCONFIG_FB_I810_I2C=yCONFIG_FB_LE80578=mCONFIG_FB_CARILLO_RANCH=mCONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not setCONFIG_FB_INTEL_I2C=yCONFIG_FB_MATROX=yCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=mCONFIG_FB_MATROX_MAVEN=mCONFIG_FB_MATROX_MULTIHEAD=yCONFIG_FB_RADEON=mCONFIG_FB_RADEON_I2C=yCONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not setCONFIG_FB_ATY=mCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=yCONFIG_FB_ATY_GX=yCONFIG_FB_ATY_BACKLIGHT=yCONFIG_FB_S3=mCONFIG_FB_SAVAGE=mCONFIG_FB_SAVAGE_I2C=yCONFIG_FB_SAVAGE_ACCEL=yCONFIG_FB_SIS=mCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_NEOMAGIC=mCONFIG_FB_KYRO=mCONFIG_FB_3DFX=mCONFIG_FB_3DFX_ACCEL=yCONFIG_FB_VOODOO1=mCONFIG_FB_VT8623=mCONFIG_FB_CYBLA=mCONFIG_FB_TRIDENT=mCONFIG_FB_TRIDENT_ACCEL=yCONFIG_FB_ARK=mCONFIG_FB_PM3=mCONFIG_FB_GEODE=yCONFIG_FB_GEODE_LX=mCONFIG_FB_GEODE_GX=m
# CONFIG_FB_GEODE_GX_SET_FBSIZE is not setCONFIG_FB_GEODE_GX1=mCONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=mCONFIG_LCD_LTV350QV=mCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_CORGI=mCONFIG_BACKLIGHT_PROGEAR=mCONFIG_BACKLIGHT_CARILLO_RANCH=m
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=yCONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#CONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=mCONFIG_SND_SEQ_RTCTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=yCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=yCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
#
# Generic devices
#CONFIG_SND_MPU401_UART=mCONFIG_SND_OPL3_LIB=mCONFIG_SND_VX_LIB=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=mCONFIG_SND_MTS64=mCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=mCONFIG_SND_PORTMAN2X4=mCONFIG_SND_SB_COMMON=mCONFIG_SND_SB16_DSP=m
#
# PCI devices
#CONFIG_SND_AD1889=mCONFIG_SND_ALS300=mCONFIG_SND_ALS4000=mCONFIG_SND_ALI5451=mCONFIG_SND_ATIIXP=m CONFIG_SND_ATIIXP_MODEM=m CONFIG_SND_AU8810=mCONFIG_SND_AU8820=mCONFIG_SND_AU8830=mCONFIG_SND_AZT3328=mCONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CA0106=mCONFIG_SND_CMIPCI=mCONFIG_SND_OXYGEN_LIB=mCONFIG_SND_OXYGEN=mCONFIG_SND_CS4281=mCONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CS5530=m CONFIG_SND_CS5535AUDIO=m CONFIG_SND_DARLA20=mCONFIG_SND_GINA20=mCONFIG_SND_LAYLA20=mCONFIG_SND_DARLA24=mCONFIG_SND_GINA24=mCONFIG_SND_LAYLA24=mCONFIG_SND_MONA=mCONFIG_SND_MIA=mCONFIG_SND_ECHO3G=mCONFIG_SND_INDIGO=mCONFIG_SND_INDIGOIO=mCONFIG_SND_INDIGODJ=mCONFIG_SND_EMU10K1=mCONFIG_SND_EMU10K1X=mCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=mCONFIG_SND_ES1938=mCONFIG_SND_ES1968=mCONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set CONFIG_SND_HDSP=mCONFIG_SND_HDSPM=mCONFIG_SND_HIFIER=mCONFIG_SND_ICE1712=mCONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_KORG1212=m
# CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL is not set CONFIG_SND_MAESTRO3=m
# CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL is not set CONFIG_SND_MIXART=mCONFIG_SND_NM256=mCONFIG_SND_PCXHR=mCONFIG_SND_RIPTIDE=mCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=mCONFIG_SND_SIS7019=m CONFIG_SND_SONICVIBES=m CONFIG_SND_TRIDENT=mCONFIG_SND_VIA82XX=m CONFIG_SND_VIA82XX_MODEM=m CONFIG_SND_VIRTUOSO=mCONFIG_SND_VX222=mCONFIG_SND_YMFPCI=m
# CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL is not set CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# SPI devices
#
#
# USB devices
#CONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_USX2Y=mCONFIG_SND_USB_CAIAQ=mCONFIG_SND_USB_CAIAQ_INPUT=y
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not setCONFIG_AC97_BUS=mCONFIG_HID_SUPPORT=yCONFIG_HID=m
# CONFIG_HID_DEBUG is not setCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=mCONFIG_USB_HIDINPUT_POWERBOOK=yCONFIG_HID_FF=yCONFIG_HID_PID=yCONFIG_LOGITECH_FF=yCONFIG_PANTHERLORD_FF=yCONFIG_THRUSTMASTER_FF=yCONFIG_ZEROPLUS_FF=yCONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=mCONFIG_USB_DEBUG=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not setCONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_ISP116X_HCD=mCONFIG_USB_OHCI_HCD=mCONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=mCONFIG_USB_U132_HCD=mCONFIG_USB_SL811_HCD=mCONFIG_USB_R8A66597_HCD=m
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_MICROTEK=mCONFIG_USB_MON=y
#
# USB port drivers
#CONFIG_USB_USS720=mCONFIG_USB_SERIAL=mCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=mCONFIG_USB_SERIAL_AIRPRIME=mCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_CH341=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP2101=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_FUNSOFT=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_IUU=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=mCONFIG_USB_SERIAL_KEYSPAN_MPR=yCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=yCONFIG_USB_SERIAL_KEYSPAN_USA28XB=yCONFIG_USB_SERIAL_KEYSPAN_USA19=yCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=yCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=yCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_MOS7720=mCONFIG_USB_SERIAL_MOS7840=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_OTI6858=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=yCONFIG_USB_SERIAL_SIERRAWIRELESS=mCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OPTION=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=mCONFIG_USB_ADUTUX=mCONFIG_USB_AUERSWALD=mCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=mCONFIG_USB_BERRY_CHARGE=mCONFIG_USB_LED=mCONFIG_USB_CYPRESS_CY7C63=mCONFIG_USB_CYTHERM=mCONFIG_USB_PHIDGET=mCONFIG_USB_PHIDGETKIT=mCONFIG_USB_PHIDGETMOTORCONTROL=mCONFIG_USB_PHIDGETSERVO=mCONFIG_USB_IDMOUSE=mCONFIG_USB_FTDI_ELAN=mCONFIG_USB_APPLEDISPLAY=mCONFIG_USB_SISUSBVGA=mCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=mCONFIG_USB_TRANCEVIBRATOR=mCONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not setCONFIG_USB_GOTEMP=mCONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=mCONFIG_USB_UEAGLEATM=mCONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not setCONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not setCONFIG_MMC_PASSWORDS=y
#
# MMC/SD Card Drivers
#CONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_BOUNCE=yCONFIG_SDIO_UART=m
#
# MMC/SD Host Controller Drivers
#CONFIG_MMC_SDHCI=m
# CONFIG_MMC_RICOH_MMC is not setCONFIG_MMC_WBSD=mCONFIG_MMC_TIFM_SD=mCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m
#
# LED drivers
#CONFIG_LEDS_NET48XX=mCONFIG_LEDS_WRAP=m
# CONFIG_LEDS_CLEVO_MAIL is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not setCONFIG_RTC_LIB=mCONFIG_RTC_CLASS=m
#
# Conflicting RTC option has been selected, check GEN_RTC and RTC #
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=yCONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#CONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1374=mCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_MAX6900=mCONFIG_RTC_DRV_RS5C372=mCONFIG_RTC_DRV_ISL1208=mCONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_M41T80=mCONFIG_RTC_DRV_M41T80_WDT=y
#
# SPI RTC drivers
#CONFIG_RTC_DRV_MAX6902=mCONFIG_RTC_DRV_R9701=mCONFIG_RTC_DRV_RS5C348=m
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=mCONFIG_RTC_DRV_DS1511=mCONFIG_RTC_DRV_DS1553=mCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_STK17TA8=mCONFIG_RTC_DRV_M48T86=mCONFIG_RTC_DRV_M48T59=mCONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#CONFIG_DMADEVICES=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=mCONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=yCONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#CONFIG_UIO=mCONFIG_UIO_CIF=m
#
# Firmware Drivers
#CONFIG_EDD=mCONFIG_DELL_RBU=mCONFIG_DCDBAS=mCONFIG_DMIID=y
#
# File systems
#CONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=mCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4DEV_FS=mCONFIG_EXT4DEV_FS_XATTR=yCONFIG_EXT4DEV_FS_POSIX_ACL=yCONFIG_EXT4DEV_FS_SECURITY=yCONFIG_JBD=mCONFIG_JBD_DEBUG=yCONFIG_JBD2=mCONFIG_JBD2_DEBUG=yCONFIG_FS_MBCACHE=m
# CONFIG_REISER4_FS is not setCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not setCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_SECURITY=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_GFS2_FS=mCONFIG_GFS2_FS_LOCKING_NOLOCK=mCONFIG_GFS2_FS_LOCKING_DLM=mCONFIG_OCFS2_FS=mCONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not setCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=mCONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not setCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=m
#
# Layered filesystems
#
# CONFIG_ECRYPT_FS is not set
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_CRAMFS=mCONFIG_VXFS_FS=mCONFIG_MINIX_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not setCONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=yCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_NFSD_TCP=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not setCONFIG_RPCSEC_GSS_KRB5=mCONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not setCONFIG_CIFS=mCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=yCONFIG_CIFS_WEAK_PW_HASH=yCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not setCONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not setCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not setCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="utf8"CONFIG_NLS_CODEPAGE_437=mCONFIG_NLS_CODEPAGE_737=mCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=mCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=mCONFIG_NLS_CODEPAGE_936=mCONFIG_NLS_CODEPAGE_950=mCONFIG_NLS_CODEPAGE_932=mCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=mCONFIG_NLS_ISO8859_8=mCONFIG_NLS_CODEPAGE_1250=mCONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=mCONFIG_NLS_ISO8859_13=mCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=mCONFIG_NLS_KOI8_U=mCONFIG_NLS_UTF8=mCONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=yCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=y
# CONFIG_SLUB_DEBUG_ON is not setCONFIG_DEBUG_PREEMPT=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not setCONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not setCONFIG_RCU_TORTURE_TEST=mCONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not setCONFIG_LKDTM=mCONFIG_FAULT_INJECTION=yCONFIG_FAILSLAB=yCONFIG_FAIL_PAGE_ALLOC=yCONFIG_FAIL_MAKE_REQUEST=yCONFIG_FAULT_INJECTION_DEBUG_FS=yCONFIG_FAULT_INJECTION_STACKTRACE_FILTER=yCONFIG_LATENCYTOP=yCONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not setCONFIG_EARLY_PRINTK=yCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=y
#
# Page alloc debug is incompatible with Software Suspend on i386 #
# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not setCONFIG_4KSTACKS=yCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=yCONFIG_DOUBLEFAULT=yCONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_DEBUG_BOOT_PARAMS=yCONFIG_CPA_DEBUG=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=yCONFIG_SECURITY_NETWORK_XFRM=yCONFIG_SECURITY_CAPABILITIES=yCONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not setCONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_AEAD=mCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_SEQIV=mCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=mCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_WP512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_GF128MUL=mCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_CBC=mCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_LRW=mCONFIG_CRYPTO_XTS=mCONFIG_CRYPTO_CTR=mCONFIG_CRYPTO_GCM=mCONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_CRYPTD=mCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not setCONFIG_CRYPTO_TWOFISH_COMMON=mCONFIG_CRYPTO_TWOFISH_586=mCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_586=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_SEED=mCONFIG_CRYPTO_SALSA20=mCONFIG_CRYPTO_SALSA20_586=mCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_CRC32C=mCONFIG_CRYPTO_CAMELLIA=mCONFIG_CRYPTO_TEST=mCONFIG_CRYPTO_AUTHENC=mCONFIG_CRYPTO_LZO=mCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=mCONFIG_CRYPTO_DEV_PADLOCK_AES=mCONFIG_CRYPTO_DEV_PADLOCK_SHA=mCONFIG_CRYPTO_DEV_GEODE=mCONFIG_CRYPTO_DEV_HIFN_795X=mCONFIG_CRYPTO_DEV_HIFN_795X_RNG=yCONFIG_VIRTUALIZATION=y
# CONFIG_LGUEST is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_ITU_T=mCONFIG_CRC32=yCONFIG_CRC7=mCONFIG_LIBCRC32C=mCONFIG_AUDIT_GENERIC=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=y
Andrew Morton
maintainerRe: 2.6.24-mm1 - Build failure at net/sched/cls_flow.c:598
Quoted 7 lines · On Mon, 04 Feb 2008 23:32:49 +0100 Tilman Schmidt <[email protected]> wrote:
My attempt to build this failed with:
CC [M]
net/sched/cls_flow.onet/sched/cls_flow.c: In function___flow_dump___:net/sched/cls_flow.c:598: error:___structtcf_ematch_tree___has no member named___hdr___Config attached.
Thanks. hm.
#else /* CONFIG_NET_EMATCH */
struct tcf_ematch_tree
{
};methinks Patrick has a CONFIG_NET_EMATCH=n problem?
Re: 2.6.24-mm1 - Build failure at net/sched/cls_flow.c:598
Hello,
I had sent a patch recently (which is currently pending) which
solves this problem.
see:
http://www.spinics.net/lists/netdev/msg54455.html
Regards,
Rami Rosen
Quoted 25 lines · Andrew Morton
Quoted 7 lines · On Mon, 04 Feb 2008 23:32:49 +0100 Tilman Schmidt <[email protected]> wrote:
My attempt to build this failed with:
CC [M]
net/sched/cls_flow.onet/sched/cls_flow.c: In function___flow_dump___:net/sched/cls_flow.c:598: error:___structtcf_ematch_tree___has no member named___hdr___Config attached.
Thanks. hm.
#else /* CONFIG_NET_EMATCH */ struct tcf_ematch_tree { };methinks Patrick has a
CONFIG_NET_EMATCH=nproblem?
--
To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 1/1 arch/um/kernel/mem.c: fix a shadowed variable
In reply to Andrew MortonFix a shadowed variable in arch/um/kernel/mem.c, since there is a global variable has the same name.
---
arch/um/kernel/mem.c +3 -3
@@ -299,7 +299,7 @@ void show_mem(void) {int pfn, total =0 , reserved =0 ;int shared =0 , cached =0 ; -int highmem =0 ; +int high_mem =0 ;struct page *page;printk (KERN_INFO "Mem-info:\n" );
@@ -311,7 +311,7 @@ void show_mem(void) page =pfn_to_page (pfn); total++;if (PageHighMem (page)) - highmem++; + high_mem++;if (PageReserved (page)) reserved++;else if (PageSwapCache (page))
@@ -320,7 +320,7 @@ void show_mem(void) shared +=page_count (page) -1 ; }printk (KERN_INFO "%d pages of RAM\n" , total); -printk (KERN_INFO "%d pages of HIGHMEM\n" , highmem); +printk (KERN_INFO "%d pages of HIGHMEM\n" , high_mem);printk (KERN_INFO "%d reserved pages\n" , reserved);printk (KERN_INFO "%d pages shared\n" , shared);printk (KERN_INFO "%d pages swap cached\n" , cached);
PATCH 1/1 arch/um/kernel/initrd.c: fix a missed conversion specifier
In reply to Andrew MortonFix a missed conversion specifier of a printk inarch/um/kernel/initrd.c.
---
arch/um/kernel/initrd.c +1 -1
@@ -32,7 +32,7 @@ static int __init read_initrd(void)* ask for no memory. */ if (size ==0 ) { -printk (KERN_ERR "\"%\" is a zero-size initrd\n" ); +printk (KERN_ERR "\"%s\" is a zero-size initrd\n" , initrd);return 0 ; }
Re: [-mm Patch] arch/um/kernel/initrd.c: fix a missed conversion specifier
Quoted 6 lines · WANG Cong
Fix a missed conversion specifier of a printk in
arch/um/kernel/initrd.c.Signed-off-by WANG Cong <[email protected]>Cc Jeff Dike <[email protected]>
ACK - 2.6.25 material. Sigh.
Jeff
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
User-mode-linux-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
Quoted 2 lines · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
Builds, boots, mostly seems to run for limited testing.
One note - the following commit(s) (and related CPA reworking) broke the NVidia binary driver (which is OK, I can fix *that* part). But can somebody explain if this should have seen a trip through the -mm tree before it hit mainstream? I didn't see these in 24-rc8-mm1:
commit af1e6844d60057774910a2d08bd75b67d73ba7d5
Author: Thomas Gleixner <[email protected]> Date: Wed Jan 30 13:34:08 2008 +0100
x86: cpa: rename global_flush_tlb() to cpa_flush_all()
commit d1028a154c65d7fadd1b2d0276c077014d401ec7
Author: Arjan van de Ven <[email protected]> Date: Wed Jan 30 13:34:07 2008 +0100
x86: make various pageattr.c functions static
Quoted 9 lines · [email protected] wrote:
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
Builds, boots, mostly seems to run for limited testing.
One note - the following commit(s) (and related CPA reworking) broke the NVidia binary driver (which is OK, I can fix *that* part). But can somebody explain if this should have seen a trip through the -mm tree before it hit mainstream? I didn't see these in 24-rc8-mm1:
well that depends on which -mm you tried; I'm sure the mm kernel of the day had it for a while. I don't think it's a realistic expectation to delay every bugfix and arch patch until Andrew gets around to releasing an -mm, not do I see the point of that, what would have been different?
Quoted 4 lines · Arjan van de Ven
Quoted 3 lines · [email protected] wrote:
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
Quoted 8 lines
Quoted 6 lines
Builds, boots, mostly seems to run for limited testing.
One note - the following commit(s) (and related CPA reworking) broke the NVidia binary driver (which is OK, I can fix *that* part). But can somebody explain if this should have seen a trip through the -mm tree before it hit mainstream? I didn't see these in 24-rc8-mm1:
well that depends on which -mm you tried; I'm sure the mm kernel of the day had it for a while.
I looked around on www.kernel.org, and I found this directory:
http://www.kernel.org/pub/linux/kernel/people/akpm/mm/ but the most recent is:
broken-out-2007-11-20-01-45.tar.bz2 20-Nov-2007 09:45 3.4M
24-rc8-mm1 came out on Jan 17, only a week before 2.6.24 came out and the merge window opened. Since this stuff wasn't in there in rc8-mm1, but did go into Linus's tree on Jan 30, it had at best 2 weeks for testing by whoever pulled the git-x86 tree in that timespan...
Quoted 2 lines
I don't think it's a realistic expectation to delay every bugfix and arch patch until Andrew gets around to releasing an -mm, not do I see the point of that, what would have been different?
A bugfix?
commit 9af993a92623e022c176459fa6607a564b9a7eaf
Author: Ingo Molnar <[email protected]> Date: Wed Jan 30 13:34:09 2008 +0100
x86: make ioremap() UC by default
Yes! A mere 120 c_p_a() fixing and rewriting patches later, we are now confident that we can enable UC by default for ioremap(), on x86 too.
That's one hell of a patch series for a "bugfix" that goes straight-to-mainline.
Quoted 4 lines · [email protected] wrote:
Quoted 2 lines
I don't think it's a realistic expectation to delay every bugfix and arch patch until Andrew gets around to releasing an -mm, not do I see the point of that, what would have been different?
A bugfix?
yes it was a really painful bugfix, but still.
I'll repeat the question. What would waiting for an -mm release have bought for this bugfix?
Answer: nothing more than what was done on Linus git.
Quoted 3 lines · Arjan van de Ven
Quoted 1 line
A bugfix?
yes it was a really painful bugfix, but still.
I'm not saying that it wasn't needed, it *was* a busticated API.
Quoted 2 lines
I'll repeat the question. What would waiting for an -mm release have bought for this bugfix?
Answer: nothing more than what was done on Linus git.
Just wondering what happened to the "large changes should percolate in -mm for a bit beforehand" concept. We've seen a lot of patchsets that totalled up to a *lot* less intrusiveness get pushed off with "This needs to cook in -mm for a while".
Andrew Morton
maintainerQuoted 12 lines · On Tue, 05 Feb 2008 14:48:14 -0500 [email protected] wrote:
Quoted 11 lines · Arjan van de Ven
Quoted 9 lines · [email protected] wrote:
Quoted 1 line · Andrew Morton
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
Builds, boots, mostly seems to run for limited testing.
One note - the following commit(s) (and related CPA reworking) broke the NVidia binary driver (which is OK, I can fix *that* part). But can somebody explain if this should have seen a trip through the -mm tree before it hit mainstream? I didn't see these in 24-rc8-mm1:
Quoted 7 lines
Quoted 1 line
well that depends on which -mm you tried; I'm sure the mm kernel of the day had it for a while.
I looked around on www.kernel.org, and I found this directory:
http://www.kernel.org/pub/linux/kernel/people/akpm/mm/ but the most recent is:
broken-out-2007-11-20-01-45.tar.bz2 20-Nov-2007 09:45 3.4M
http://userweb.kernel.org/~akpm/mmotm/ contains the latest -mm tree. Updated more-than-daily when it's changing.
Hi Ingo,
Quoted 5 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
- The x86 git tree has been dropped due to runtime failure on one of my test machines
My PC display warning message at boot time.
Could I help your debugging?
----------------------------------------------------------------------------------------------
end_request: I/O error, dev fd0, sector 0
Welcome to CentOS release 5 (Final) Press 'I' to enter interactive startup.
------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2037 _spin_unlock_irq+0x20/0x23() Modules linked in: usb_storage ahci ata_piix libata ehci_hcd ohci_hcd uhci_hcd Pid: 1085, comm: hwclock Not tainted 2.6.24-mm1 #1 [<c011e75f>] warn_on_slowpath+0x40/0x4f [<c012cc1b>] __kernel_text_address+0x18/0x23 [<c0105710>] dump_trace+0xb3/0xbd [<c0137bd1>] check_usage_forwards+0x16/0x35 [<c0137d5d>] mark_lock+0x16d/0x389 [<c03ed8f2>] _spin_unlock_irq+0x20/0x23 [<c0114675>] hpet_rtc_interrupt+0xe6/0x2a7 [<c014582b>] handle_IRQ_event+0x13/0x3d [<c01466d6>] handle_edge_irq+0xc2/0xff [<c010664a>] do_IRQ+0x6e/0x84 [<c010516e>] common_interrupt+0x2e/0x34 [<c03e007b>] nv_probe+0x1281/0x13bc [<c03ef010>] do_page_fault+0x15f/0x4ae [<c03eeeb1>] do_page_fault+0x0/0x4ae [<c03edb62>] error_code+0x72/0x78 ======================= ---[ end trace 908d580e4399e39b ]---
Quoted 29 lines · KOSAKI Motohiro
Hi Ingo,
Quoted 5 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
- The x86 git tree has been dropped due to runtime failure on one of my test machines
My PC display warning message at boot time.
Could I help your debugging?----------------------------------------------------------------------------------------------
end_request: I/O error, dev fd0, sector 0
Welcome to CentOS release 5 (Final) Press 'I' to enter interactive startup.------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2037 _spin_unlock_irq+0x20/0x23() Modules linked in: usb_storage ahci ata_piix libata ehci_hcd ohci_hcd uhci_hcd Pid: 1085, comm: hwclock Not tainted 2.6.24-mm1 #1 [<c011e75f>] warn_on_slowpath+0x40/0x4f [<c012cc1b>] __kernel_text_address+0x18/0x23 [<c0105710>] dump_trace+0xb3/0xbd [<c0137bd1>] check_usage_forwards+0x16/0x35 [<c0137d5d>] mark_lock+0x16d/0x389 [<c03ed8f2>] _spin_unlock_irq+0x20/0x23 [<c0114675>] hpet_rtc_interrupt+0xe6/0x2a7 [<c014582b>] handle_IRQ_event+0x13/0x3d [<c01466d6>] handle_edge_irq+0xc2/0xff
Quoted 8 lines
[<c010664a>] do_IRQ+0x6e/0x84 [<c010516e>] common_interrupt+0x2e/0x34 [<c03e007b>] nv_probe+0x1281/0x13bc [<c03ef010>] do_page_fault+0x15f/0x4ae [<c03eeeb1>] do_page_fault+0x0/0x4ae [<c03edb62>] error_code+0x72/0x78 ======================= ---[ end trace 908d580e4399e39b ]---
should be fixed by the commit below. (already upstream)
Ingo
-------------->
commit 795d45b22c079946332bf3825afefe5a981a97b6
Author: Andrew Morton <[email protected]> Date: Mon Feb 4 16:48:10 2008 +0100
x86: fix RTC lockdep warning: potential hardirq recursion
After disabling both CONFIG_DEBUG_LOCKING_API_SELFTESTS and netconsole
(using current mainline) I get a login prompt, and also...
[ 5.181668] SELinux: policy loaded with handle_unknown=deny
[ 5.183315] type=1403 audit(1202100038.157:3): policy loaded auid=4294967295 ses=4294967295
[ 5.822073] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 7.819146] ------------[ cut here ]------------
[ 7.819146] WARNING: at kernel/lockdep.c:2033 trace_hardirqs_on+0x9b/0x10d()
[ 7.819146] Modules linked in: generic ext3 jbd ide_disk ide_core
[ 7.819146] Pid: 399, comm: hwclock Not tainted 2.6.24 #4
[ 7.819146] [<c011d140>] warn_on_slowpath+0x41/0x51
[ 7.819146] [<c01364a9>] ? lock_release_holdtime+0x50/0x56
[ 7.819146] [<c013770c>] ? check_usage_forwards+0x19/0x3b
[ 7.819146] [<c01390c4>] ? __lock_acquire+0xac3/0xb0b
[ 7.819146] [<c0108c98>] ? native_sched_clock+0x8b/0x9f
[ 7.819146] [<c01364a9>] ? lock_release_holdtime+0x50/0x56
[ 7.819146] [<c030ca6c>] ? _spin_unlock_irq+0x22/0x42
[ 7.819146] [<c013848b>] trace_hardirqs_on+0x9b/0x10d
[ 7.819146] [<c030ca6c>] _spin_unlock_irq+0x22/0x42
[ 7.819146] [<c011481e>] hpet_rtc_interrupt+0xdf/0x290
[ 7.819146] [<c014ea90>] handle_IRQ_event+0x1a/0x46
[ 7.819146] [<c014f8ea>] handle_edge_irq+0xbe/0xff
[ 7.819146] [<c0106e08>] do_IRQ+0x6d/0x84
[ 7.819146] [<c0105596>] common_interrupt+0x2e/0x34
[ 7.819146] [<c013007b>] ? ktime_get_ts+0x8/0x3f
[ 7.819146] [<c0139420>] ? lock_release+0x167/0x16f
[ 7.819146] [<c017974a>] ? core_sys_select+0x2c/0x327
[ 7.819146] [<c0179792>] core_sys_select+0x74/0x327
[ 7.819146] [<c0108c98>] ? native_sched_clock+0x8b/0x9f
[ 7.819146] [<c01364a9>] ? lock_release_holdtime+0x50/0x56
[ 7.819146] [<c030ca6c>] ? _spin_unlock_irq+0x22/0x42
[ 7.819146] [<c01384d6>] ? trace_hardirqs_on+0xe6/0x10d
[ 7.819146] [<c030ca77>] ? _spin_unlock_irq+0x2d/0x42
[ 7.819146] [<c023b437>] ? rtc_do_ioctl+0x11b/0x677
[ 7.819146] [<c01c487e>] ? inode_has_perm+0x5e/0x68
[ 7.819146] [<c01364a9>] ? lock_release_holdtime+0x50/0x56
[ 7.819146] [<c0108c98>] ? native_sched_clock+0x8b/0x9f
[ 7.819146] [<c01c490b>] ? file_has_perm+0x83/0x8c
[ 7.819146] [<c023ba08>] ? rtc_ioctl+0xf/0x11
[ 7.819146] [<c017898d>] ? do_ioctl+0x55/0x67
[ 7.819146] [<c0179d15>] sys_select+0x93/0x163
[ 7.819146] [<c0104b39>] ? sysenter_past_esp+0x9a/0xa5
[ 7.819146] [<c0104afe>] sysenter_past_esp+0x5f/0xa5
[ 7.819146] =======================
[ 7.819146] ---[ end trace 96540ca301ffb84c ]---
[ 7.819210] rtc: lost 6 interrupts
[ 7.870668] type=1400 audit(1202128840.794:4): avc: denied { audit_write } for pid=399 comm="hwclock" capability=29 scontext=system_u:system_r:hwclock_t:s0 tcontext=system_u:system_r:hwclock_t:s0 tclass=capability
[ 9.538866] input: PC Speaker as /class/input/input5
Because hpet_rtc_interrupt()'s call to get_rtc_time() ends up
resolving to include/asm-generic/rtc.h's (hilariously inlined)
get_rtc_time(), which does spin_unlock_irq() from hard IRQ context.
The obvious patch fixes it.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>include/asm-generic/rtc.h +7 -4
@@ -35,10 +35,11 @@static inline unsigned char rtc_is_updating (void ) {unsigned char uip; +unsigned long flags; -spin_lock_irq (&rtc_lock); +spin_lock_irqsave (&rtc_lock, flags); uip = (CMOS_READ (RTC_FREQ_SELECT ) &RTC_UIP ); -spin_unlock_irq (&rtc_lock); +spin_unlock_irqrestore (&rtc_lock, flags);return uip; }
@@ -46,6 +47,8 @@ static inline unsigned int get_rtc_time(struct rtc_time *time) {unsigned long uip_watchdog = jiffies;unsigned char ctrl; +unsigned long flags; +#ifdef CONFIG_MACH_DECSTATION unsigned int real_year;#endif
@@ -72,7 +75,7 @@ static inline unsigned int get_rtc_time(struct rtc_time *time)* RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated * by the RTC when initially set to a non-zero value. */ -spin_lock_irq (&rtc_lock); +spin_lock_irqsave (&rtc_lock, flags); time->tm_sec =CMOS_READ (RTC_SECONDS ); time->tm_min =CMOS_READ (RTC_MINUTES ); time->tm_hour =CMOS_READ (RTC_HOURS );
@@ -83,7 +86,7 @@ static inline unsigned int get_rtc_time(struct rtc_time *time) real_year =CMOS_READ (RTC_DEC_YEAR );#endif ctrl =CMOS_READ (RTC_CONTROL ); -spin_unlock_irq (&rtc_lock); +spin_unlock_irqrestore (&rtc_lock, flags);if (!(ctrl &RTC_DM_BINARY ) ||RTC_ALWAYS_BCD ) {
Quoted 3 lines
should be fixed by the commit below. (already upstream)
Ingo
Oops, sorry ;-)
2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
In reply to Andrew MortonOn (03/02/08 17:16), Andrew Morton didst pronounce:
Quoted 3 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
bl6-13 (4-way x86_64 machine) from test.kernel.org is failing to boot recent -mm and mainline trees. I noticed it when testing -mm before rebasing other patches but the oops on mainline looks the same. The full console log is below but the important difference between a working and non-working kernel is the following
-PERCPU: Allocating 62512 bytes of per cpu data
-Built 1 zonelists in Node order, mobility grouping on. Total pages: 255875 +PERCPU: Allocating 65560 bytes of per cpu data
+cpu with no node 2, num_online_nodes 1
+cpu with no node 3, num_online_nodes 1
+Built 1 zonelists in Node order, mobility grouping on. Total pages:
251257
"cpu with no node 2" is actually saying that cpu 2 has no node and the message is a just misleading. The number of online nodes and cpu mappings are not adding up as I got this from a debugging patch
Online nodes
o 0
CPU <-> node mappings (cpu_to_node)
o CPU 0 -> 0
o CPU 1 -> 0
o CPU 2 -> 1
o CPU 3 -> 1
As the failing code in __alloc_pages() is;
restart:
z = zonelist->zones; /* the list of zones suitable for gfp_mask */
if (unlikely(*z == NULL)) {it implies that an attempt is been made to use an uninitialised zonelist.
If I bodge cpu_to_node() to returning 0,the machine boots but I didn't see an obvious candidate in origin.patch for the root-cause when I looked around. I'll bisect this in the morning if this is not a known problem and no one suggests a possibility.
Linux version 2.6.24-mm1-autokern1 ([email protected]) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Wed Feb 13 08:15:47 CST 2008
Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1202913709 earlyprintk=serial,ttyS1,19200 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffcddc0 (usable)
BIOS-e820: 000000003ffcddc0 - 000000003ffd0000 (ACPI data)
BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
console [earlyser0] enabledend_pfn_map = 1048576
kernel direct mapping tables up to 100000000 @ 8000-d000
DMI 2.3 present.
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
ACPI: FACS 3FFCFCC0, 0040
ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
Bootmem setup node 0 0000000000000000-000000003ffcd000
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-9e87ef] TEXT DATA BSS
early res: 3 [37e5f000-37fef981] RAMDISK
early res: 4 [9d400-a03ff] EBDA
early res: 5 [8000-afff] PGTABLE
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 157
0: 256 -> 262093Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2208
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 13, address 0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]: apic_id 12, address 0xfec20000, GSI 48-51
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
Setting APIC routing to flat
ACPI: HPET id: 0x10228203 base: 0xfecff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 65560 bytes of per cpu data
cpu with no node 2, num_online_nodes 1
cpu with no node 3, num_online_nodes 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 251257
Policy zone: DMA32
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1202913709 earlyprintk=serial,ttyS1,19200 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 1993.782 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Linux version 2.6.24-mm1-autokern1 ([email protected]) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Wed Feb 13 08:15:47 CST 2008
Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1202913709 earlyprintk=serial,ttyS1,19200 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffcddc0 (usable)
BIOS-e820: 000000003ffcddc0 - 000000003ffd0000 (ACPI data)
BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
console [earlyser0] enabledend_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
ACPI: FACS 3FFCFCC0, 0040
ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
Bootmem setup node 0 0000000000000000-000000003ffcd000
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-9e87ef] TEXT DATA BSS
early res: 3 [37e5f000-37fef981] RAMDISK
early res: 4 [9d400-a03ff] EBDA
early res: 5 [8000-afff] PGTABLE
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 157
0: 256 -> 262093Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2208
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 13, address 0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]: apic_id 12, address 0xfec20000, GSI 48-51
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
Setting APIC routing to flat
ACPI: HPET id: 0x10228203 base: 0xfecff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 65560 bytes of per cpu data
cpu with no node 2, num_online_nodes 1
cpu with no node 3, num_online_nodes 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 251257
Policy zone: DMA32
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1202913709 earlyprintk=serial,ttyS1,19200 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 1993.782 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ dc000000 size 64 MB
Node 1: aperture @ dc000000 size 64 MB
Memory: 1002980k/1048372k available (3034k kernel code, 44996k reserved, 1474k data, 392k init)
Calibrating delay using timer specific routine.. 3991.54 BogoMIPS (lpj=7983093)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20070126
Using local APIC timer interrupts.
Detected 12.461 MHz APIC timer.
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3987.60 BogoMIPS (lpj=7975207)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 270 stepping 02
BUG: unable to handle kernel paging request at 0000000000007358 IP: [<ffffffff8026911a>] __alloc_pages+0x4f/0x3a9 PGD 0 Oops: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.24-mm1-autokern1 #1 RIP: 0010:[<ffffffff8026911a>] [<ffffffff8026911a>] __alloc_pages+0x4f/0x3a9 RSP: 0000:ffff81003fa2fc20 EFLAGS: 00010246 RAX: 0000000000007358 RBX: 00000000000412d0 RCX: 0000000000000006 RDX: 0000000000000010 RSI: 0000000000000605 RDI: ffffffff805a679a RBP: 00000000000412d0 R08: 0000000000000000 R09: ffff81003fa2d060 R10: 0000000000000000 R11: ffff81003f8030c0 R12: 0000000000007350 R13: 0000000000000000 R14: ffff81003fa29340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffffffff80668000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000007358 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003fa2e000, task ffff81003fa2d060) Stack: 00000001ffffffff 0000001000000001 ffff81003fa2d060 0000000000007358 00000000000000d0 ffff81000000fa70 0000000000000000 ffffffff80242cd4 ffff81003fa2fe98 00000000000412d0 ffff81003f801080 0000000000000040 Call Trace: [<ffffffff80242cd4>] ? __kernel_text_address+0x9/0x26 [<ffffffff802859a9>] ? kmem_getpages+0xc6/0x196 [<ffffffff80285d2a>] ? cache_grow+0xa6/0x218 [<ffffffff802860ea>] ? ____cache_alloc_node+0xd3/0x121 [<ffffffff80285c2c>] ? kmem_cache_alloc_node+0x10e/0x13e [<ffffffff804ee3ff>] ? cpuup_callback+0x8d/0x316 [<ffffffff804f348d>] ? notifier_call_chain+0x29/0x56 [<ffffffff804eda75>] ? _cpu_up+0x68/0x101 [<ffffffff804edb62>] ? cpu_up+0x54/0x61 [<ffffffff8089e63e>] ? kernel_init+0xbf/0x2ef [<ffffffff804f1149>] ? _spin_unlock_irq+0x9/0xc [<ffffffff8020cbe8>] ? child_rip+0xa/0x12 [<ffffffff8035ecf0>] ? acpi_ds_init_one_object+0x0/0x7c [<ffffffff8089e57f>] ? kernel_init+0x0/0x2ef [<ffffffff8020cbde>] ? child_rip+0x0/0x12 Code: 48 89 44 24 10 89 54 24 0c 74 16 be 05 06 00 00 48 c7 c7 9a 67 5a 80 e8 99 05 fc ff e8 ae 68 28 00 49 8d 44 24 08 48 89 44 24 18 <49> 83 7c 24 08 00 0f 84 fa 02 00 00 89 ea b9 44 00 00 00 44 89 RIP [<ffffffff8026911a>] __alloc_pages+0x4f/0x3a9 RSP <ffff81003fa2fc20> CR2: 0000000000007358 ---[ end trace 4eaa2a86a8e2da22 ]--- Kernel panic - not syncing: Attempted to kill init!
Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
Quoted 18 lines · Mel Gorman
On (03/02/08 17:16), Andrew Morton didst pronounce:
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
bl6-13 (4-way
x86_64machine) from test.kernel.org is failing to boot recent -mm and mainline trees. I noticed it when testing -mm before rebasing other patches but the oops on mainline looks the same. The full console log is below but the important difference between a working and non-working kernel is the following(quoted diff) +4
-2-PERCPU: Allocating 62512 bytes of per cpu data -Built 1 zonelists in Node order, mobility grouping on. Total pages: 255875 +PERCPU: Allocating 65560 bytes of per cpu data +cpu with no node 2, num_online_nodes 1 +cpu with no node 3, num_online_nodes 1 +Built 1 zonelists in Node order, mobility grouping on. Total pages:251257
Quoted 3 lines
"cpu with no node 2" is actually saying that cpu 2 has no node and the message is a just misleading. The number of online nodes and cpu mappings are not adding up as I got this from a debugging patch
I'll take a closer look though I've not been able to duplicate your error yet. It does appear from the message text that the code is out-of-date. The latest "setup_per_cpu_areas()" should say:
"cpu %d has no node, num_online_nodes %d\n",
i, num_online_nodes());
There are a number of backed up patches in the queue. I'm resubmitting the whole set re-based on 2.6.25-rc1 shortly. (I don't know though, that any will address this problem.)
Thanks,
Mike
Quoted 15 lines
Online nodes
o 0
CPU <-> node mappings (cpu_to_node)
o CPU 0 -> 0
o CPU 1 -> 0
o CPU 2 -> 1
o CPU 3 -> 1As the failing code in
__alloc_pages()is;restart:
z = zonelist->zones; /* the list of zones suitable for gfp_mask */ if (unlikely(*z == NULL)) {
Quoted 6 lines
it implies that an attempt is been made to use an uninitialised zonelist.
If I bodge
cpu_to_node()to returning 0,the machine boots but I didn't see an obvious candidate in origin.patch for the root-cause when I looked around. I'll bisect this in the morning if this is not a known problem and no one suggests a possibility.
The
Quoted 244 lines
Linux version 2.6.24-mm1-autokern1 ([email protected]) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Wed Feb 13 08:15:47 CST 2008
Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=noautobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1202913709 earlyprintk=serial,ttyS1,19200 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 -000000000009d400(usable)
BIOS-e820:000000000009d400-00000000000a0000(reserved)
BIOS-e820:00000000000e0000- 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 -000000003ffcddc0(usable)
BIOS-e820:000000003ffcddc0-000000003ffd0000(ACPI data)
BIOS-e820:000000003ffd0000- 0000000040000000 (reserved)
BIOS-e820:00000000fec00000- 0000000100000000 (reserved)
console [earlyser0] enabledend_pfn_map= 1048576
kernel direct mapping tables up to 100000000 @ 8000-d000
DMI 2.3 present.
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
ACPI: FACS 3FFCFCC0, 0040
ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
Bootmem setup node 0 0000000000000000-000000003ffcd000
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff]SMP_TRAMPOLINE
early res: 2 [200000-9e87ef] TEXT DATA BSS
early res: 3 [37e5f000-37fef981] RAMDISK
early res: 4 [9d400-a03ff] EBDA
early res: 5 [8000-afff] PGTABLE
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges0: 0 -> 157 0: 256 -> 262093Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port:0x2208
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI:LAPIC_NMI(acpi_id[0x00] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x01] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x02] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]:apic_id14, address0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]:apic_id13, address0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]:apic_id12, address0xfec20000, GSI 48-51
ACPI:INT_SRC_OVR(bus 0bus_irq0global_irq2 dfl dfl)
ACPI:INT_SRC_OVR(bus 0bus_irq11global_irq11 low level)
Setting APIC routing to flat
ACPI: HPET id:0x10228203base:0xfecff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 65560 bytes of per cpu data
cpu with no node 2,num_online_nodes1
cpu with no node 3,num_online_nodes1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 251257
Policy zone: DMA32
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=noautobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1202913709 earlyprintk=serial,ttyS1,19200 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated againstPM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 1993.782 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Linux version 2.6.24-mm1-autokern1 ([email protected]) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Wed Feb 13 08:15:47 CST 2008
Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=noautobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1202913709 earlyprintk=serial,ttyS1,19200 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 -000000000009d400(usable)
BIOS-e820:000000000009d400-00000000000a0000(reserved)
BIOS-e820:00000000000e0000- 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 -000000003ffcddc0(usable)
BIOS-e820:000000003ffcddc0-000000003ffd0000(ACPI data)
BIOS-e820:000000003ffd0000- 0000000040000000 (reserved)
BIOS-e820:00000000fec00000- 0000000100000000 (reserved)
console [earlyser0] enabledend_pfn_map= 1048576
DMI 2.3 present.
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
ACPI: FACS 3FFCFCC0, 0040
ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
Bootmem setup node 0 0000000000000000-000000003ffcd000
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff]SMP_TRAMPOLINE
early res: 2 [200000-9e87ef] TEXT DATA BSS
early res: 3 [37e5f000-37fef981] RAMDISK
early res: 4 [9d400-a03ff] EBDA
early res: 5 [8000-afff] PGTABLE
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges0: 0 -> 157 0: 256 -> 262093Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port:0x2208
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI:LAPIC_NMI(acpi_id[0x00] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x01] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x02] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]:apic_id14, address0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]:apic_id13, address0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]:apic_id12, address0xfec20000, GSI 48-51
ACPI:INT_SRC_OVR(bus 0bus_irq0global_irq2 dfl dfl)
ACPI:INT_SRC_OVR(bus 0bus_irq11global_irq11 low level)
Setting APIC routing to flat
ACPI: HPET id:0x10228203base:0xfecff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 65560 bytes of per cpu data
cpu with no node 2,num_online_nodes1
cpu with no node 3,num_online_nodes1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 251257
Policy zone: DMA32
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=noautobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1202913709 earlyprintk=serial,ttyS1,19200 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated againstPM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 1993.782 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @dc000000size 64 MB
Node 1: aperture @dc000000size 64 MB
Memory: 1002980k/1048372k available (3034k kernel code, 44996k reserved, 1474k data, 392k init)
Calibrating delay using timer specific routine.. 3991.54 BogoMIPS (lpj=7983093)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20070126
Using local APIC timer interrupts.
Detected 12.461 MHz APIC timer.
Booting processor 1/4 APIC0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3987.60 BogoMIPS (lpj=7975207)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 270 stepping 02BUG: unable to handle kernel paging request at 0000000000007358 IP: [<ffffffff8026911a>] __alloc_pages+0x4f/0x3a9 PGD 0 Oops: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.24-mm1-autokern1 #1 RIP: 0010:[<ffffffff8026911a>] [<ffffffff8026911a>] __alloc_pages+0x4f/0x3a9 RSP: 0000:ffff81003fa2fc20 EFLAGS: 00010246 RAX: 0000000000007358 RBX: 00000000000412d0 RCX: 0000000000000006 RDX: 0000000000000010 RSI: 0000000000000605 RDI: ffffffff805a679a RBP: 00000000000412d0 R08: 0000000000000000 R09: ffff81003fa2d060 R10: 0000000000000000 R11: ffff81003f8030c0 R12: 0000000000007350 R13: 0000000000000000 R14: ffff81003fa29340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffffffff80668000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000007358 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003fa2e000, task ffff81003fa2d060) Stack: 00000001ffffffff 0000001000000001 ffff81003fa2d060 0000000000007358 00000000000000d0 ffff81000000fa70 0000000000000000 ffffffff80242cd4 ffff81003fa2fe98 00000000000412d0 ffff81003f801080 0000000000000040 Call Trace: [<ffffffff80242cd4>] ? __kernel_text_address+0x9/0x26 [<ffffffff802859a9>] ? kmem_getpages+0xc6/0x196 [<ffffffff80285d2a>] ? cache_grow+0xa6/0x218 [<ffffffff802860ea>] ? ____cache_alloc_node+0xd3/0x121 [<ffffffff80285c2c>] ? kmem_cache_alloc_node+0x10e/0x13e [<ffffffff804ee3ff>] ? cpuup_callback+0x8d/0x316 [<ffffffff804f348d>] ? notifier_call_chain+0x29/0x56 [<ffffffff804eda75>] ? _cpu_up+0x68/0x101 [<ffffffff804edb62>] ? cpu_up+0x54/0x61 [<ffffffff8089e63e>] ? kernel_init+0xbf/0x2ef [<ffffffff804f1149>] ? _spin_unlock_irq+0x9/0xc [<ffffffff8020cbe8>] ? child_rip+0xa/0x12 [<ffffffff8035ecf0>] ? acpi_ds_init_one_object+0x0/0x7c [<ffffffff8089e57f>] ? kernel_init+0x0/0x2ef [<ffffffff8020cbde>] ? child_rip+0x0/0x12 Code: 48 89 44 24 10 89 54 24 0c 74 16 be 05 06 00 00 48 c7 c7 9a 67 5a 80 e8 99 05 fc ff e8 ae 68 28 00 49 8d 44 24 08 48 89 44 24 18 <49> 83 7c 24 08 00 0f 84 fa 02 00 00 89 ea b9 44 00 00 00 44 89 RIP [<ffffffff8026911a>] __alloc_pages+0x4f/0x3a9 RSP <ffff81003fa2fc20> CR2: 0000000000007358 ---[ end trace 4eaa2a86a8e2da22 ]--- Kernel panic - not syncing: Attempted to kill init!
Mel Gorman
Reviewed-by Christoph LameterRe: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
On (13/02/08 10:45), Mike Travis didst pronounce:
Quoted 27 lines
Quoted 18 lines · Mel Gorman
On (03/02/08 17:16), Andrew Morton didst pronounce:
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
bl6-13 (4-way
x86_64machine) from test.kernel.org is failing to boot recent -mm and mainline trees. I noticed it when testing -mm before rebasing other patches but the oops on mainline looks the same. The full console log is below but the important difference between a working and non-working kernel is the following(quoted diff) +4
-2-PERCPU: Allocating 62512 bytes of per cpu data -Built 1 zonelists in Node order, mobility grouping on. Total pages: 255875 +PERCPU: Allocating 65560 bytes of per cpu data +cpu with no node 2, num_online_nodes 1 +cpu with no node 3, num_online_nodes 1 +Built 1 zonelists in Node order, mobility grouping on. Total pages:251257
Quoted 3 lines
"cpu with no node 2" is actually saying that cpu 2 has no node and the message is a just misleading. The number of online nodes and cpu mappings are not adding up as I got this from a debugging patch
I'll take a closer look though I've not been able to duplicate your error yet. It does appear from the message text that the code is out-of-date. The latest "
setup_per_cpu_areas()" should say:
Quoted 7 lines
"cpu %d has no node,
num_online_nodes%d\n",
i,num_online_nodes());There are a number of backed up patches in the queue. I'm resubmitting the whole set re-based on 2.6.25-rc1 shortly. (I don't know though, that any will address this problem.)
According to git-bisect, the problem patch is below. It doesn't back out cleanly so I haven't verified for sure the bisect is correct yet.
commit ef97001f3d869d7cc1956e0cc0d89e514e3f7db0
Author: [email protected] <[email protected]> Date: Wed Jan 30 13:33:10 2008 +0100
x86: change size of APICIDs from u8 to u16
Change the size of APICIDs from u8 to u16. This partially supports the new x2apic mode that will be present on future processor chips. (Chips actually support 32-bit APICIDs, but that change is more intrusive. Supporting 16-bit is sufficient for now).
I've included just the partial change from u8 to u16 apicids. The remaining x2apic changes will be in a separate patch.
In addition, the fake_node_to_pxm_map[] and fake_apicid_to_node[] tables have been moved from local data to the __initdata section reducing stack pressure when MAX_NUMNODES and MAX_LOCAL_APIC are increased in size.
arch/x86/kernel/genapic_64.c +2 -2
@@ -32,10 +32,10 @@* array during this time. Is it zeroed when the per_cpu * data area is removed. */ -u8 x86_cpu_to_apicid_init[NR_CPUS ]__initdata +u16 x86_cpu_to_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_cpu_to_apicid_ptr; -DEFINE_PER_CPU (u8, x86_cpu_to_apicid) =BAD_APICID ; +DEFINE_PER_CPU (u16, x86_cpu_to_apicid) =BAD_APICID ;EXPORT_PER_CPU_SYMBOL (x86_cpu_to_apicid);struct genapic __read_mostly *genapic = &apic_flat;
arch/x86/kernel/mpparse_64.c +2 -2
@@ -67,7 +67,7 @@ unsigned disabled_cpus __cpuinitdata;/* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map =PHYSID_MASK_NONE ; -u8 bios_cpu_apicid[NR_CPUS ] = { [0 ...NR_CPUS -1 ] =BAD_APICID }; +u16 bios_cpu_apicid[NR_CPUS ] = { [0 ...NR_CPUS -1 ] =BAD_APICID };/*
@@ -132,7 +132,7 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)* area is created. */ if (x86_cpu_to_apicid_ptr) { -u8 *x86_cpu_to_apicid = (u8 *)x86_cpu_to_apicid_ptr; +u16 *x86_cpu_to_apicid = (u16 *)x86_cpu_to_apicid_ptr; x86_cpu_to_apicid[cpu] = m->mpc_apicid; }else {per_cpu (x86_cpu_to_apicid, cpu) = m->mpc_apicid;
arch/x86/kernel/smpboot_64.c +1 -1
@@ -65,7 +65,7 @@ int smp_num_siblings = 1;EXPORT_SYMBOL (smp_num_siblings);/* Last level cache ID of each logical CPU */ -DEFINE_PER_CPU (u8, cpu_llc_id) =BAD_APICID ; +DEFINE_PER_CPU (u16, cpu_llc_id) =BAD_APICID ;/* Bitmask of currently online CPUs */ cpumask_t cpu_online_map__read_mostly ;
arch/x86/mm/numa_64.c +1 -1
@@ -626,7 +626,7 @@ void __init init_cpu_to_node(void)int i;for (i =0 ; i <NR_CPUS ; i++) { -u8 apicid = x86_cpu_to_apicid_init[i]; +u16 apicid = x86_cpu_to_apicid_init[i];if (apicid ==BAD_APICID )continue ;
arch/x86/mm/srat_64.c +13 -9
@@ -130,6 +130,9 @@ void __init acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) {int pxm, node; +int apic_id; + + apic_id = pa->apic_id;if (srat_disabled ())return ;if (pa->header.length !=sizeof (struct acpi_srat_cpu_affinity )) {
@@ -145,10 +148,10 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)bad_srat ();return ; } - apicid_to_node[pa->apic_id] = node; + apicid_to_node[apic_id] = node; acpi_numa =1 ;printk (KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n" , - pxm, pa->apic_id, node); + pxm, apic_id, node); }int update_end_of_memory (unsigned long end) {return -1 ;}
@@ -343,7 +346,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)/* First clean up the node list */ for (i =0 ; i <MAX_NUMNODES ; i++) {cutoff_node (i, start, end); -if ((nodes[i].end - nodes[i].start) <NODE_MIN_SIZE ) { +/* ZZZ why was this needed. At least add a comment */ +if (nodes[i].end && (nodes[i].end - nodes[i].start) <NODE_MIN_SIZE ) {unparse_node (i);node_set_offline (i); }
@@ -384,6 +388,12 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) }#ifdef CONFIG_NUMA_EMU +static int fake_node_to_pxm_map[MAX_NUMNODES ]__initdata = { + [0 ...MAX_NUMNODES -1 ] =PXM_INVAL +}; +static unsigned char fake_apicid_to_node[MAX_LOCAL_APIC ]__initdata = { + [0 ...MAX_LOCAL_APIC -1 ] =NUMA_NO_NODE +};static int __init find_node_by_addr (unsigned long addr) {int ret =NUMA_NO_NODE ;
@@ -414,12 +424,6 @@ static int __init find_node_by_addr(unsigned long addr)void __init acpi_fake_nodes (const struct bootnode *fake_nodes,int num_nodes) {int i, j; -int fake_node_to_pxm_map[MAX_NUMNODES ] = { - [0 ...MAX_NUMNODES -1 ] =PXM_INVAL - }; -unsigned char fake_apicid_to_node[MAX_LOCAL_APIC ] = { - [0 ...MAX_LOCAL_APIC -1 ] =NUMA_NO_NODE - };printk (KERN_INFO "Faking PXM affinity for fake nodes on real " "topology.\n" );
include/asm-x86/processor.h +7 -7
@@ -90,14 +90,14 @@ struct cpuinfo_x86 {#ifdef CONFIG_SMP cpumask_t llc_shared_map;/* cpus sharing the last level cache */ #endif -unsigned char x86_max_cores;/* cpuid returned max cores value */ -unsigned char apicid; -unsigned short x86_clflush_size; +u16 x86_max_cores;/* cpuid returned max cores value */ +u16 apicid; +u16 x86_clflush_size;#ifdef CONFIG_SMP -unsigned char booted_cores;/* number of cores as seen by OS */ -__u8 phys_proc_id;/* Physical processor id. */ -__u8 cpu_core_id;/* Core id */ -__u8 cpu_index;/* index into per_cpu list */ +u16 booted_cores;/* number of cores as seen by OS */ +u16 phys_proc_id;/* Physical processor id. */ +u16 cpu_core_id;/* Core id */ +u16 cpu_index;/* index into per_cpu list */ #endif } __attribute__((__aligned__(SMP_CACHE_BYTES)));
include/asm-x86/smp_64.h +4 -4
@@ -26,14 +26,14 @@ extern void unlock_ipi_call_lock(void);extern int smp_call_function_mask (cpumask_t mask,void (*func)(void *),void *info,int wait); -extern u8 __initdata x86_cpu_to_apicid_init[]; +extern u16 __initdata x86_cpu_to_apicid_init[];extern void *x86_cpu_to_apicid_ptr; -extern u8 bios_cpu_apicid[]; +extern u16 bios_cpu_apicid[];DECLARE_PER_CPU (cpumask_t, cpu_sibling_map);DECLARE_PER_CPU (cpumask_t, cpu_core_map); -DECLARE_PER_CPU (u8, cpu_llc_id); -DECLARE_PER_CPU (u8, x86_cpu_to_apicid); +DECLARE_PER_CPU (u16, cpu_llc_id); +DECLARE_PER_CPU (u16, x86_cpu_to_apicid);static inline int cpu_present_to_apicid (int mps_cpu) {
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
Quoted 29 lines · Mel Gorman
On (13/02/08 10:45), Mike Travis didst pronounce:
Quoted 28 lines
Quoted 17 lines · Mel Gorman
On (03/02/08 17:16), Andrew Morton didst pronounce:
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
bl6-13 (4-way
x86_64machine) from test.kernel.org is failing to boot recent -mm and mainline trees. I noticed it when testing -mm before rebasing other patches but the oops on mainline looks the same. The full console log is below but the important difference between a working and non-working kernel is the following(quoted diff) +4
-2-PERCPU: Allocating 62512 bytes of per cpu data -Built 1 zonelists in Node order, mobility grouping on. Total pages: 255875 +PERCPU: Allocating 65560 bytes of per cpu data +cpu with no node 2, num_online_nodes 1 +cpu with no node 3, num_online_nodes 1 +Built 1 zonelists in Node order, mobility grouping on. Total pages:251257
Quoted 3 lines
"cpu with no node 2" is actually saying that cpu 2 has no node and the message is a just misleading. The number of online nodes and cpu mappings are not adding up as I got this from a debugging patch
I'll take a closer look though I've not been able to duplicate your error yet. It does appear from the message text that the code is out-of-date. The latest "
setup_per_cpu_areas()" should say:"cpu %d has no node,
num_online_nodes%d\n",
i,num_online_nodes());
Quoted 7 lines
Quoted 4 lines
There are a number of backed up patches in the queue. I'm resubmitting the whole set re-based on 2.6.25-rc1 shortly. (I don't know though, that any will address this problem.)
According to git-bisect, the problem patch is below. It doesn't back out cleanly so I haven't verified for sure the bisect is correct yet.
This might make sense. This code is in preparation for the extended apic's available on the new processors. I've tested the code with our simulator (with no errors) and I'm setting up to test on a real machine that has multiple numa nodes. I wonder if maybe BIOS is not providing correct node data, or the ACPI parsing is in error? You might try adding "apic=debug" to the boot command line.
For the short term, we can remove this patch if it's causing the problem. A more complete patch will be available soon that contains the entire set of x2apic changes.
Thanks,
Mike
Quoted 204 lines
commit
ef97001f3d869d7cc1956e0cc0d89e514e3f7db0Author: [email protected] <[email protected]> Date: Wed Jan 30 13:33:10 2008 +0100x86: change size of APICIDs from u8 to u16
Change the size of APICIDs from u8 to u16. This partially supports the new x2apic mode that will be present on future processor chips. (Chips actually support 32-bit APICIDs, but that change is more intrusive. Supporting 16-bit is sufficient for now).
Signed-off-by Jack Steiner <[email protected]>I've included just the partial change from u8 to u16 apicids. The remaining x2apic changes will be in a separate patch.
In addition, the fake_node_to_pxm_map[] and fake_apicid_to_node[] tables have been moved from local data to the
__initdatasection reducing stack pressure whenMAX_NUMNODESandMAX_LOCAL_APICare increased in size.Signed-off-by Mike Travis <[email protected]>Reviewed-by Christoph Lameter <[email protected]>Signed-off-by Ingo Molnar <[email protected]>Signed-off-by Thomas Gleixner <[email protected]>arch/x86/kernel/genapic_64.c +2
-2@@ -32,10 +32,10 @@* array during this time. Is it zeroed when the per_cpu * data area is removed. */ -u8 x86_cpu_to_apicid_init[NR_CPUS ]__initdata +u16 x86_cpu_to_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_cpu_to_apicid_ptr; -DEFINE_PER_CPU (u8, x86_cpu_to_apicid) =BAD_APICID ; +DEFINE_PER_CPU (u16, x86_cpu_to_apicid) =BAD_APICID ;EXPORT_PER_CPU_SYMBOL (x86_cpu_to_apicid);struct genapic __read_mostly *genapic = &apic_flat;arch/x86/kernel/mpparse_64.c +2
-2@@ -67,7 +67,7 @@ unsigned disabled_cpus __cpuinitdata;/* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map =PHYSID_MASK_NONE ; -u8 bios_cpu_apicid[NR_CPUS ] = { [0 ...NR_CPUS -1 ] =BAD_APICID }; +u16 bios_cpu_apicid[NR_CPUS ] = { [0 ...NR_CPUS -1 ] =BAD_APICID };/* @@ -132,7 +132,7 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)* area is created. */ if (x86_cpu_to_apicid_ptr) { -u8 *x86_cpu_to_apicid = (u8 *)x86_cpu_to_apicid_ptr; +u16 *x86_cpu_to_apicid = (u16 *)x86_cpu_to_apicid_ptr; x86_cpu_to_apicid[cpu] = m->mpc_apicid; }else {per_cpu (x86_cpu_to_apicid, cpu) = m->mpc_apicid;arch/x86/kernel/smpboot_64.c +1
-1@@ -65,7 +65,7 @@ int smp_num_siblings = 1;EXPORT_SYMBOL (smp_num_siblings);/* Last level cache ID of each logical CPU */ -DEFINE_PER_CPU (u8, cpu_llc_id) =BAD_APICID ; +DEFINE_PER_CPU (u16, cpu_llc_id) =BAD_APICID ;/* Bitmask of currently online CPUs */ cpumask_t cpu_online_map__read_mostly ;arch/x86/mm/numa_64.c +1
-1@@ -626,7 +626,7 @@ void __init init_cpu_to_node(void)int i;for (i =0 ; i <NR_CPUS ; i++) { -u8 apicid = x86_cpu_to_apicid_init[i]; +u16 apicid = x86_cpu_to_apicid_init[i];if (apicid ==BAD_APICID )continue ;arch/x86/mm/srat_64.c +13
-9@@ -130,6 +130,9 @@ void __init acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) {int pxm, node; +int apic_id; + + apic_id = pa->apic_id;if (srat_disabled ())return ;if (pa->header.length !=sizeof (struct acpi_srat_cpu_affinity )) {@@ -145,10 +148,10 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)bad_srat ();return ; } - apicid_to_node[pa->apic_id] = node; + apicid_to_node[apic_id] = node; acpi_numa =1 ;printk (KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n" , - pxm, pa->apic_id, node); + pxm, apic_id, node); }int update_end_of_memory (unsigned long end) {return -1 ;}@@ -343,7 +346,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)/* First clean up the node list */ for (i =0 ; i <MAX_NUMNODES ; i++) {cutoff_node (i, start, end); -if ((nodes[i].end - nodes[i].start) <NODE_MIN_SIZE ) { +/* ZZZ why was this needed. At least add a comment */ +if (nodes[i].end && (nodes[i].end - nodes[i].start) <NODE_MIN_SIZE ) {unparse_node (i);node_set_offline (i); }@@ -384,6 +388,12 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) }#ifdef CONFIG_NUMA_EMU +static int fake_node_to_pxm_map[MAX_NUMNODES ]__initdata = { + [0 ...MAX_NUMNODES -1 ] =PXM_INVAL +}; +static unsigned char fake_apicid_to_node[MAX_LOCAL_APIC ]__initdata = { + [0 ...MAX_LOCAL_APIC -1 ] =NUMA_NO_NODE +};static int __init find_node_by_addr (unsigned long addr) {int ret =NUMA_NO_NODE ;@@ -414,12 +424,6 @@ static int __init find_node_by_addr(unsigned long addr)void __init acpi_fake_nodes (const struct bootnode *fake_nodes,int num_nodes) {int i, j; -int fake_node_to_pxm_map[MAX_NUMNODES ] = { - [0 ...MAX_NUMNODES -1 ] =PXM_INVAL - }; -unsigned char fake_apicid_to_node[MAX_LOCAL_APIC ] = { - [0 ...MAX_LOCAL_APIC -1 ] =NUMA_NO_NODE - };printk (KERN_INFO "Faking PXM affinity for fake nodes on real " "topology.\n" );include/asm-x86/processor.h +7
-7@@ -90,14 +90,14 @@ struct cpuinfo_x86 {#ifdef CONFIG_SMP cpumask_t llc_shared_map;/* cpus sharing the last level cache */ #endif -unsigned char x86_max_cores;/* cpuid returned max cores value */ -unsigned char apicid; -unsigned short x86_clflush_size; +u16 x86_max_cores;/* cpuid returned max cores value */ +u16 apicid; +u16 x86_clflush_size;#ifdef CONFIG_SMP -unsigned char booted_cores;/* number of cores as seen by OS */ -__u8 phys_proc_id;/* Physical processor id. */ -__u8 cpu_core_id;/* Core id */ -__u8 cpu_index;/* index into per_cpu list */ +u16 booted_cores;/* number of cores as seen by OS */ +u16 phys_proc_id;/* Physical processor id. */ +u16 cpu_core_id;/* Core id */ +u16 cpu_index;/* index into per_cpu list */ #endif } __attribute__((__aligned__(SMP_CACHE_BYTES)));include/asm-x86/smp_64.h +4
-4@@ -26,14 +26,14 @@ extern void unlock_ipi_call_lock(void);extern int smp_call_function_mask (cpumask_t mask,void (*func)(void *),void *info,int wait); -extern u8 __initdata x86_cpu_to_apicid_init[]; +extern u16 __initdata x86_cpu_to_apicid_init[];extern void *x86_cpu_to_apicid_ptr; -extern u8 bios_cpu_apicid[]; +extern u16 bios_cpu_apicid[];DECLARE_PER_CPU (cpumask_t, cpu_sibling_map);DECLARE_PER_CPU (cpumask_t, cpu_core_map); -DECLARE_PER_CPU (u8, cpu_llc_id); -DECLARE_PER_CPU (u8, x86_cpu_to_apicid); +DECLARE_PER_CPU (u16, cpu_llc_id); +DECLARE_PER_CPU (u16, x86_cpu_to_apicid);static inline int cpu_present_to_apicid (int mps_cpu) {
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
On (14/02/08 12:41), Mike Travis didst pronounce:
Quoted 38 lines
Quoted 29 lines · Mel Gorman
On (13/02/08 10:45), Mike Travis didst pronounce:
Quoted 28 lines
Quoted 17 lines · Mel Gorman
On (03/02/08 17:16), Andrew Morton didst pronounce:
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
bl6-13 (4-way
x86_64machine) from test.kernel.org is failing to boot recent -mm and mainline trees. I noticed it when testing -mm before rebasing other patches but the oops on mainline looks the same. The full console log is below but the important difference between a working and non-working kernel is the following(quoted diff) +4
-2-PERCPU: Allocating 62512 bytes of per cpu data -Built 1 zonelists in Node order, mobility grouping on. Total pages: 255875 +PERCPU: Allocating 65560 bytes of per cpu data +cpu with no node 2, num_online_nodes 1 +cpu with no node 3, num_online_nodes 1 +Built 1 zonelists in Node order, mobility grouping on. Total pages:251257
Quoted 3 lines
"cpu with no node 2" is actually saying that cpu 2 has no node and the message is a just misleading. The number of online nodes and cpu mappings are not adding up as I got this from a debugging patch
I'll take a closer look though I've not been able to duplicate your error yet. It does appear from the message text that the code is out-of-date. The latest "
setup_per_cpu_areas()" should say:"cpu %d has no node,
num_online_nodes%d\n",
i,num_online_nodes());Quoted 7 lines
Quoted 4 lines
There are a number of backed up patches in the queue. I'm resubmitting the whole set re-based on 2.6.25-rc1 shortly. (I don't know though, that any will address this problem.)
According to git-bisect, the problem patch is below. It doesn't back out cleanly so I haven't verified for sure the bisect is correct yet.
Quoted 7 lines
This might make sense. This code is in preparation for the extended apic's available on the new processors. I've tested the code with our simulator (with no errors) and I'm setting up to test on a real machine that has multiple numa nodes. I wonder if maybe BIOS is not providing correct node data, or the ACPI parsing is in error? You might try adding "apic=debug" to the boot command line.
I tried this, but the dmesg complained about a malformed option. I'll check out why tomorrow but it didn't appear particularly helpful.
Quoted 4 lines
For the short term, we can remove this patch if it's causing the problem. A more complete patch will be available soon that contains the entire set of x2apic changes.
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).
arch/x86/kernel/genapic_64.c +2 -2
@@ -25,10 +25,10 @@#endif /* which logical CPU number maps to which CPU (physical APIC ID) */ -u16 x86_cpu_to_apicid_init[NR_CPUS ]__initdata +u8 x86_cpu_to_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_cpu_to_apicid_early_ptr; -DEFINE_PER_CPU (u16, x86_cpu_to_apicid) =BAD_APICID ; +DEFINE_PER_CPU (u8, x86_cpu_to_apicid) =BAD_APICID ;EXPORT_PER_CPU_SYMBOL (x86_cpu_to_apicid);struct genapic __read_mostly *genapic = &apic_flat;
arch/x86/kernel/mpparse_64.c +1 -1
@@ -67,7 +67,7 @@/* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map =PHYSID_MASK_NONE ; -u16 x86_bios_cpu_apicid_init[NR_CPUS ]__initdata +u8 x86_bios_cpu_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_bios_cpu_apicid_early_ptr;DEFINE_PER_CPU (u16, x86_bios_cpu_apicid) =BAD_APICID ;
include/asm-x86/smp_64.h +4 -3
@@ -26,15 +26,16 @@extern int smp_call_function_mask (cpumask_t mask,void (*func)(void *),void *info,int wait); -extern u16 __initdata x86_cpu_to_apicid_init[]; -extern u16 __initdata x86_bios_cpu_apicid_init[]; +extern u8 __initdata x86_cpu_to_apicid_init[]; +extern u8 __initdata x86_bios_cpu_apicid_init[];extern void *x86_cpu_to_apicid_early_ptr;extern void *x86_bios_cpu_apicid_early_ptr; +DECLARE_PER_CPU (u8, x86_cpu_to_apicid);/* physical ID */ +extern u8 bios_cpu_apicid[];DECLARE_PER_CPU (cpumask_t, cpu_sibling_map);DECLARE_PER_CPU (cpumask_t, cpu_core_map);DECLARE_PER_CPU (u16, cpu_llc_id); -DECLARE_PER_CPU (u16, x86_cpu_to_apicid);DECLARE_PER_CPU (u16, x86_bios_cpu_apicid);static inline int cpu_present_to_apicid (int mps_cpu)
Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
Linux version 2.6.24-mm1-autokern1 ([email protected]) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Thu Feb 14 18:26:36 CST 2008 Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1203036811 loglevel=8 acpi=debug BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffcddc0 (usable)
BIOS-e820: 000000003ffcddc0 - 000000003ffd0000 (ACPI data)
BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Malformed early option 'loglevel'
Malformed early option 'acpi'
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 262093) 1 entries of 3200 usedend_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
ACPI: FACS 3FFCFCC0, 0040
ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 262093) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000003ffcd000
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-a0566f] TEXT DATA BSS
early res: 3 [37e5f000-37fef97b] RAMDISK
early res: 4 [9d400-a03ff] EBDA
early res: 5 [8000-afff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001600000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810001c00000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002000000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002200000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002600000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810002800000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810002c00000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810002e00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003200000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810003400000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810003800000 on node 0
[ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810003a00000 on node 0
[ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810003e00000 on node 0
[ffffe20002000000-ffffe200021fffff] PMD ->ffff810004000000 on node 0
sizeof(struct page) = 136
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 157
0: 256 -> 262093On node 0 totalpages: 261994
DMA zone: 136 pages used for memmap
DMA zone: 2064 pages reserved
DMA zone: 1797 pages, LIFO batch:0
DMA32 zone: 8566 pages used for memmap
DMA32 zone: 249431 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2208
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 13, address 0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]: apic_id 12, address 0xfec20000, GSI 48-51
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10228203 base: 0xfecff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 65560 bytes of per cpu data
cpu with no node 2, num_online_nodes 1
cpu with no node 3, num_online_nodes 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 251228
Policy zone: DMA32
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1203036811 loglevel=8 acpi=debug Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 1993.777 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
Checking aperture...
Node 0: aperture @ dc000000 size 64 MB
Node 1: aperture @ dc000000 size 64 MB
Memory: 1002864k/1048372k available (3149k kernel code, 45112k reserved, 1470k data, 396k init)
hpet clockevent registered
Calibrating delay using timer specific routine.. 3991.61 BogoMIPS (lpj=7983231)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12461103
Detected 12.461 MHz APIC timer.
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3987.60 BogoMIPS (lpj=7975215)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 270 stepping 02
BUG: unable to handle kernel paging request at 0000000000007358 IP: [<ffffffff8026ceec>] __alloc_pages+0x4f/0x403 PGD 0 Oops: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.24-mm1-autokern1 #1 RIP: 0010:[<ffffffff8026ceec>] [<ffffffff8026ceec>] __alloc_pages+0x4f/0x403 RSP: 0000:ffff81003fa2fbc0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000412d0 RCX: 0000000000007358 RDX: 0000000000000010 RSI: 0000000000000605 RDI: ffffffff805c3375 RBP: ffff81003fa2fc30 R08: 0000000000000000 R09: ffff81003fa2d060 R10: ffff81000000b000 R11: 000412d000000010 R12: 00000000000412d0 R13: 0000000000007350 R14: 0000000000000000 R15: ffff81003fa29340 FS: 0000000000000000(0000) GS:ffffffff80684000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000007358 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003fa2e000, task ffff81003fa2d060) Stack: 000000100000c5c8 ffffffff00000000 ffff81003fa2d060 0000000000007358 000000003fa2fd60 0000000000000000 00000000000000d0 ffff81000000fa70 0000000000000000 00000000000412d0 ffff81003f801080 0000000000000040 Call Trace: [<ffffffff8028ab2c>] kmem_getpages+0xd5/0x1ad [<ffffffff8028aed0>] cache_grow+0xa8/0x222 [<ffffffff8028b2d8>] ____cache_alloc_node+0xff/0x125 [<ffffffff8028adcf>] kmem_cache_alloc_node+0x114/0x144 [<ffffffff8050ac1c>] cpuup_callback+0x8e/0x331 [<ffffffff8050ffa6>] notifier_call_chain+0x33/0x65 [<ffffffff8024a061>] __raw_notifier_call_chain+0x9/0xb [<ffffffff8050a269>] _cpu_up+0x6c/0x103 [<ffffffff8050a357>] cpu_up+0x57/0x67 [<ffffffff808ba689>] kernel_init+0xc5/0x2fe [<ffffffff8020cd88>] child_rip+0xa/0x12 [<ffffffff8036d814>] ? acpi_ds_init_one_object+0x0/0x88 [<ffffffff808ba5c4>] ? kernel_init+0x0/0x2fe [<ffffffff8020cd7e>] ? child_rip+0x0/0x12 Code: 00 83 e2 10 48 89 45 a0 89 55 94 74 16 be 05 06 00 00 48 c7 c7 75 33 5c 80 e8 cf db fb ff e8 4e f3 29 00 49 8d 4d 08 48 89 4d a8 <49> 83 7d 08 00 0f 84 39 03 00 00 44 89 e0 b9 44 00 00 00 4c 89 RIP [<ffffffff8026ceec>] __alloc_pages+0x4f/0x403 RSP <ffff81003fa2fbc0> CR2: 0000000000007358 ---[ end trace 4eaa2a86a8e2da22 ]--- Kernel panic - not syncing: Attempted to kill init!
Linux version 2.6.24-mm1-autokern1 ([email protected]) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Thu Feb 14 17:38:43 CST 2008 Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1203033940 loglevel=8 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffcddc0 (usable)
BIOS-e820: 000000003ffcddc0 - 000000003ffd0000 (ACPI data)
BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Malformed early option 'loglevel'
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 262093) 1 entries of 3200 usedend_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
ACPI: FACS 3FFCFCC0, 0040
ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 262093) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000003ffcd000
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-a0566f] TEXT DATA BSS
early res: 3 [37e5f000-37fef97f] RAMDISK
early res: 4 [9d400-a03ff] EBDA
early res: 5 [8000-afff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001600000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810001c00000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002000000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002200000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002600000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810002800000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810002c00000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810002e00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003200000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810003400000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810003800000 on node 0
[ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810003a00000 on node 0
[ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810003e00000 on node 0
[ffffe20002000000-ffffe200021fffff] PMD ->ffff810004000000 on node 0
sizeof(struct page) = 136
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 157
0: 256 -> 262093On node 0 totalpages: 261994
DMA zone: 136 pages used for memmap
DMA zone: 2064 pages reserved
DMA zone: 1797 pages, LIFO batch:0
DMA32 zone: 8566 pages used for memmap
DMA32 zone: 249431 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2208
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 13, address 0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]: apic_id 12, address 0xfec20000, GSI 48-51
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10228203 base: 0xfecff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 65560 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 251228
Policy zone: DMA32
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1203033940 loglevel=8 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 1993.788 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
Checking aperture...
Node 0: aperture @ dc000000 size 64 MB
Node 1: aperture @ dc000000 size 64 MB
Memory: 1002864k/1048372k available (3149k kernel code, 45112k reserved, 1471k data, 396k init)
hpet clockevent registered
Calibrating delay using timer specific routine.. 3991.59 BogoMIPS (lpj=7983185)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12461170
Detected 12.461 MHz APIC timer.__cpu_up: bad cpu 1
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 3987.60 BogoMIPS (lpj=7975213)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 270 stepping 02__cpu_up: bad cpu 3
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005
groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000004 domain 1: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005
groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005
CPU2 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005
groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000004 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000001 domain 1: span 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005
groups: 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000005net_namespace: 1056 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LP00] (IRQs *10)
ACPI: PCI Interrupt Link [LP01] (IRQs *7)
ACPI: PCI Interrupt Link [LP02] (IRQs *9)
ACPI: PCI Interrupt Link [LP03] (IRQs *5)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfecff000, IRQs 2, 8, 1
hpet0: 3 32-bit timers, 14318180 Hz
Time: hpet clocksource has been installed.
system 00:01: ioport range 0x510-0x517 has been reserved
system 00:01: ioport range 0x504-0x507 has been reserved
system 00:01: ioport range 0x500-0x503 has been reserved
system 00:01: ioport range 0x520-0x53f has been reserved
system 00:01: ioport range 0x540-0x547 has been reserved
system 00:01: ioport range 0x460-0x461 has been reserved
system 00:0b: ioport range 0x400-0x47f could not be reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: ioport range 0x540-0x55f could not be reserved
system 00:0b: ioport range 0x580-0x5ff has been reserved
system 00:0b: ioport range 0xca8-0xca8 has been reserved
system 00:0b: ioport range 0xcac-0xcac has been reserved
system 00:0b: ioport range 0xcb0-0xcb0 has been reserved
system 00:0b: ioport range 0xcb4-0xcb4 has been reserved
system 00:0b: ioport range 0xcc0-0xcdf has been reserved
system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
PCI: Bridge: 0000:00:06.0
IO window: 3000-3fff
MEM window: 0xfd000000-0xfeafffff
PREFETCH window: 0x00000000f0000000-0x00000000fcffffff
PCI: Bridge: 0000:00:0a.0
IO window: 4000-4fff
MEM window: 0xee000000-0xefffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: 5000-ffff
MEM window: disabled.
PREFETCH window: disabled.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1602k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1203012607.688:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:01:04.0: Boot video devicepci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: ACPI0007:02 is registered as cooling_device0
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: ACPI0007:03 is registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
Real Time Clock Driver v1.12achpet_resources: 0xfecff000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
erial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
tg3.c:v3.87 (December 20, 2007)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 24
eth0: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:11:25:75:af:6e
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[0] TSOcap[0]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 25 (level, low) -> IRQ 25
eth1: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:11:25:75:af:6f
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide2: I/O resource 0x0-0x7 not free.
ide2: ports already in use, skipping probe
ide3: I/O resource 0x0-0x7 not free.
ide3: ports already in use, skipping probe
ide4: I/O resource 0x0-0x7 not free.
ide4: ports already in use, skipping probe
ide5: I/O resource 0x0-0x7 not free.
ide5: ports already in use, skipping probe
ide6: I/O resource 0x0-0x7 not free.
ide6: ports already in use, skipping probe
ide7: I/O resource 0x0-0x7 not free.
ide7: ports already in use, skipping probe
ide8: I/O resource 0x0-0x7 not free.
ide8: ports already in use, skipping probe
ide9: I/O resource 0x0-0x7 not free.
ide9: ports already in use, skipping probe
ide-floppy driver 1.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 26 (level, low) -> IRQ 26
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=26
scsi 0:0:0:0: Direct-Access IBM-ESXS ST973401LC FN B41D PQ: 0 ANSI: 4
target0:0:0: Beginning Domain Validation
target0:0:0: Ending Domain Validation
target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: b3 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: b3 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.06
mptlan: ioc0: PortNum=0, ProtocolFlags=08h (Itlb)
mptlan: ioc0: Hmmm... LAN protocol seems to be disabled on this adapter port!ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19ohci_hcd 0000:01:00.0: OHCI Host Controllerohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1ohci_hcd 0000:01:00.0: irq 19, io mem 0xfeaff000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19ohci_hcd 0000:01:00.1: OHCI Host Controllerohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2ohci_hcd 0000:01:00.1: irq 19, io mem 0xfeafe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhiddrivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 270 processors (2 cpu cores) (version 2.20.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
Freeing unused kernel memory: 396k freed
Write protecting the kernel read-only data: 1128k
Red Hat nash version 5.0.32 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Making device-mapper control node
Scanning logical volumes
Reading all physical volumes. This may take a while...
Found volume group "VolGroup00" using metadata type lvm2
Activating logical volumes
4 logical volume(s) in volume group "VolGroup00" now active
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
Welcome to Fedora Core
Press 'I' to enter interactive startup.
Setting clock (localtime): Thu Feb 14 18:10:27 CST 2008 [ OK ]
Starting udev: [ OK ]
Setting hostname bl6-13.ltc.austin.ibm.com: [ OK ]
Setting up Logical Volume Management: 4 logical volume(s) in volume group "VolGroup00" now active
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00/dev/VolGroup00/LogVol00: clean, 415267/7929856 files, 7058281/7929856 blocks
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1
/boot: clean, 136/512512 files, 100080/512064 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Starting readahead_early: Starting background readahead: [ OK ] [ OK ] FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.24-mm1-autokern1/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko): No such device Bringing up loopback interface: [ OK ] Bringing up interface eth1: udevd-event[1486]: wait_for_sysfs: waiting for '/sys/devices/platform/parport_pc.956/bus' failed
udevd-event[1487]: wait_for_sysfs: waiting for '/sys/devices/platform/parport_pc.888/bus' failed udevd-event[1488]: wait_for_sysfs: waiting for '/sys/devices/platform/parport_pc.632/bus' failed [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting irqbalance: [ OK ]
Starting portmap: [ OK ]
Starting NFS statd: [ OK ]
Starting RPC idmapd: [ OK ]
Starting kdump: No kdump kernel image found.[WARNING]
Tried to locate /boot/vmlinux--kdump[ OK ]
Starting system message bus: [ OK ]
Starting Bluetooth services:[ OK ][ OK ]
Mounting other filesystems: [ OK ]
Starting hidd: [ OK ]
Starting automount: [ OK ]
Starting smartd: [ OK ]
Starting acpi daemon: [ OK ]
Starting hpiod: [ OK ]
Starting hpssd: [ OK ]
Starting cups: [ OK ]
Starting sshd: [ OK ]
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Starting console mouse services: [ OK ]
Starting crond: [ OK ]
Starting xfs: [ OK ]
Starting anacron: [ OK ]
Starting atd: [ OK ]
Starting Avahi daemon: [ OK ]
Starting cups-config-daemon: [ OK ]
Starting HAL daemon: [ OK ]
Fedora Core release 5 (Bordeaux)
Kernel 2.6.24-mm1-autokern1 on an x86_64
bl6-13.ltc.austin.ibm.com login: -- 0:conmux-control -- time-stamp -- Feb/14/08 16:10:17 -- (bot:conmon-payload) disconnected
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
Quoted 53 lines · Mel Gorman
On (14/02/08 12:41), Mike Travis didst pronounce:
Quoted 34 lines
Quoted 33 lines · Mel Gorman
On (13/02/08 10:45), Mike Travis didst pronounce:
Quoted 32 lines
Quoted 17 lines · Mel Gorman
On (03/02/08 17:16), Andrew Morton didst pronounce:
Quoted 2 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24/2.6.24-mm1/
bl6-13 (4-way
x86_64machine) from test.kernel.org is failing to boot recent -mm and mainline trees. I noticed it when testing -mm before rebasing other patches but the oops on mainline looks the same. The full console log is below but the important difference between a working and non-working kernel is the following(quoted diff) +4
-2-PERCPU: Allocating 62512 bytes of per cpu data -Built 1 zonelists in Node order, mobility grouping on. Total pages: 255875 +PERCPU: Allocating 65560 bytes of per cpu data +cpu with no node 2, num_online_nodes 1 +cpu with no node 3, num_online_nodes 1 +Built 1 zonelists in Node order, mobility grouping on. Total pages:251257
Quoted 3 lines
"cpu with no node 2" is actually saying that cpu 2 has no node and the message is a just misleading. The number of online nodes and cpu mappings are not adding up as I got this from a debugging patch
I'll take a closer look though I've not been able to duplicate your error yet. It does appear from the message text that the code is out-of-date. The latest "
setup_per_cpu_areas()" should say:"cpu %d has no node,
num_online_nodes%d\n",
i,num_online_nodes());There are a number of backed up patches in the queue. I'm resubmitting the whole set re-based on 2.6.25-rc1 shortly. (I don't know though, that any will address this problem.)
Quoted 9 lines
Quoted 2 lines
According to git-bisect, the problem patch is below. It doesn't back out cleanly so I haven't verified for sure the bisect is correct yet.
This might make sense. This code is in preparation for the extended apic's available on the new processors. I've tested the code with our simulator (with no errors) and I'm setting up to test on a real machine that has multiple numa nodes. I wonder if maybe BIOS is not providing correct node data, or the ACPI parsing is in error? You might try adding "apic=debug" to the boot command line.
I tried this, but the dmesg complained about a malformed option. I'll check out why tomorrow but it didn't appear particularly helpful.
Quoted 4 lines
For the short term, we can remove this patch if it's causing the problem. A more complete patch will be available soon that contains the entire set of x2apic changes.
Quoted 10 lines
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "
__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).
Thanks Mel. I'm heading up to MV today to debug on the NUMA machine.
-Mike
Quoted 54 lines
diff -ru
linux-2.6/arch/x86/kernel/genapic_64.clinux-2.6-working/arch/x86/kernel/genapic_64.carch/x86/kernel/genapic_64.c +2
-2@@ -25,10 +25,10 @@#endif /* which logical CPU number maps to which CPU (physical APIC ID) */ -u16 x86_cpu_to_apicid_init[NR_CPUS ]__initdata +u8 x86_cpu_to_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_cpu_to_apicid_early_ptr; -DEFINE_PER_CPU (u16, x86_cpu_to_apicid) =BAD_APICID ; +DEFINE_PER_CPU (u8, x86_cpu_to_apicid) =BAD_APICID ;EXPORT_PER_CPU_SYMBOL (x86_cpu_to_apicid);struct genapic __read_mostly *genapic = &apic_flat;diff -ru
linux-2.6/arch/x86/kernel/mpparse_64.clinux-2.6-working/arch/x86/kernel/mpparse_64.carch/x86/kernel/mpparse_64.c +1
-1@@ -67,7 +67,7 @@/* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map =PHYSID_MASK_NONE ; -u16 x86_bios_cpu_apicid_init[NR_CPUS ]__initdata +u8 x86_bios_cpu_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_bios_cpu_apicid_early_ptr;DEFINE_PER_CPU (u16, x86_bios_cpu_apicid) =BAD_APICID ;diff -ru
linux-2.6/include/asm-x86/smp_64.hlinux-2.6-working/include/asm-x86/smp_64.hinclude/asm-x86/smp_64.h +4
-3@@ -26,15 +26,16 @@extern int smp_call_function_mask (cpumask_t mask,void (*func)(void *),void *info,int wait); -extern u16 __initdata x86_cpu_to_apicid_init[]; -extern u16 __initdata x86_bios_cpu_apicid_init[]; +extern u8 __initdata x86_cpu_to_apicid_init[]; +extern u8 __initdata x86_bios_cpu_apicid_init[];extern void *x86_cpu_to_apicid_early_ptr;extern void *x86_bios_cpu_apicid_early_ptr; +DECLARE_PER_CPU (u8, x86_cpu_to_apicid);/* physical ID */ +extern u8 bios_cpu_apicid[];DECLARE_PER_CPU (cpumask_t, cpu_sibling_map);DECLARE_PER_CPU (cpumask_t, cpu_core_map);DECLARE_PER_CPU (u16, cpu_llc_id); -DECLARE_PER_CPU (u16, x86_cpu_to_apicid);DECLARE_PER_CPU (u16, x86_bios_cpu_apicid);static inline int cpu_present_to_apicid (int mps_cpu)
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
In reply to Mel GormanWell, after lot's of aggravation I finally got the dusty old numa box to boot up, and the upstream linux-2.6 kernel works fine. (I've attached the startup log showing 8 cores on 4 nodes.)
The big difference appears in where memory is located. Your box has all the memory on node 0 where my box has memory on all the nodes...
Quoted 1 line
From the working log:
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: PXM 2 -> APIC 4 -> Node 2
SRAT: PXM 2 -> APIC 5 -> Node 2
SRAT: PXM 3 -> APIC 6 -> Node 3
SRAT: PXM 3 -> APIC 7 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 0-e4000000
SRAT: Node 0 PXM 0 0-200000000
SRAT: Node 1 PXM 1 200000000-400000000
SRAT: Node 2 PXM 2 400000000-600000000
SRAT: Node 3 PXM 3 600000000-800000000
Quoted 1 line
From the failing log:
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
The message that cpu's 2 & 3 having no node is therefore misleading, it should say that cpu's 2 & 3 have no "node local memory". But other than that, it should allocate the PERCPU memory on node 0 and everything's fine.
Apparently then the only way to debug this is to fake a setup where some cpus have no node local memory and go from there. Unfortunately, the box I'm testing on has no working remote access. I'll see if I can't fake it out on a non-numa box until the lab is back open on Tuesday.
Thanks,
Mike
Quoted 2 lines · Mel Gorman
On (14/02/08 12:41), Mike Travis didst pronounce:
Quoted 1 line
Mel Gorman wrote:
...
Quoted 73 lines
Quoted 10 lines
Quoted 3 lines
Quoted 1 line
According to git-bisect, the problem patch is below. It doesn't back out cleanly so I haven't verified for sure the bisect is correct yet.
This might make sense. This code is in preparation for the extended apic's available on the new processors. I've tested the code with our simulator (with no errors) and I'm setting up to test on a real machine that has multiple numa nodes. I wonder if maybe BIOS is not providing correct node data, or the ACPI parsing is in error? You might try adding "apic=debug" to the boot command line.
I tried this, but the dmesg complained about a malformed option. I'll check out why tomorrow but it didn't appear particularly helpful.
Quoted 4 lines
For the short term, we can remove this patch if it's causing the problem. A more complete patch will be available soon that contains the entire set of x2apic changes.
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "
__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).diff -ru
linux-2.6/arch/x86/kernel/genapic_64.clinux-2.6-working/arch/x86/kernel/genapic_64.carch/x86/kernel/genapic_64.c +2
-2@@ -25,10 +25,10 @@#endif /* which logical CPU number maps to which CPU (physical APIC ID) */ -u16 x86_cpu_to_apicid_init[NR_CPUS ]__initdata +u8 x86_cpu_to_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_cpu_to_apicid_early_ptr; -DEFINE_PER_CPU (u16, x86_cpu_to_apicid) =BAD_APICID ; +DEFINE_PER_CPU (u8, x86_cpu_to_apicid) =BAD_APICID ;EXPORT_PER_CPU_SYMBOL (x86_cpu_to_apicid);struct genapic __read_mostly *genapic = &apic_flat;diff -ru
linux-2.6/arch/x86/kernel/mpparse_64.clinux-2.6-working/arch/x86/kernel/mpparse_64.carch/x86/kernel/mpparse_64.c +1
-1@@ -67,7 +67,7 @@/* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map =PHYSID_MASK_NONE ; -u16 x86_bios_cpu_apicid_init[NR_CPUS ]__initdata +u8 x86_bios_cpu_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_bios_cpu_apicid_early_ptr;DEFINE_PER_CPU (u16, x86_bios_cpu_apicid) =BAD_APICID ;diff -ru
linux-2.6/include/asm-x86/smp_64.hlinux-2.6-working/include/asm-x86/smp_64.hinclude/asm-x86/smp_64.h +2
-2@@ -26,15 +26,16 @@extern int smp_call_function_mask (cpumask_t mask,void (*func)(void *),void *info,int wait); -extern u16 __initdata x86_cpu_to_apicid_init[]; -extern u16 __initdata x86_bios_cpu_apicid_init[]; +extern u8 __initdata x86_cpu_to_apicid_init[]; +extern u8 __initdata x86_bios_cpu_apicid_init[];extern void *x86_cpu_to_apicid_early_ptr;extern void *x86_bios_cpu_apicid_early_ptr;
include/asm-x86/smp_64.h line 41
Quoted 10 lines
include/asm-x86/smp_64.h +2
-1+DECLARE_PER_CPU (u8, x86_cpu_to_apicid);/* physical ID */ +extern u8 bios_cpu_apicid[];DECLARE_PER_CPU (cpumask_t, cpu_sibling_map);DECLARE_PER_CPU (cpumask_t, cpu_core_map);DECLARE_PER_CPU (u16, cpu_llc_id); -DECLARE_PER_CPU (u16, x86_cpu_to_apicid);DECLARE_PER_CPU (u16, x86_bios_cpu_apicid);static inline int cpu_present_to_apicid (int mps_cpu)
Linux version 2.6.25-rc1-defconfig-00075-g10270d4-dirty (travis@polaris-admin) (gcc version 4.2.0) #2 SMP Thu Feb 14 14:41:12 PST 2008 Command line: root=/dev/sda2 splash=silent console=tty0 resume=/dev/sda1 apic=debug loglevel=8
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000099c00 (usable)
BIOS-e820: 0000000000099c00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000e3f70000 (usable)
BIOS-e820: 00000000e3f70000 - 00000000e3f77000 (ACPI data)
BIOS-e820: 00000000e3f77000 - 00000000e3f80000 (ACPI NVS)
BIOS-e820: 00000000e3f80000 - 00000000e4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000800000000 (usable)
Malformed early option 'loglevel'
Entering add_active_range(0, 0, 153) 0 entries of 3200 used
Entering add_active_range(0, 256, 933744) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 8388608) 2 entries of 3200 usedend_pfn_map = 8388608
DMI present.
ACPI: RSDP 000F7820, 0024 (r2 PTLTD )
ACPI: XSDT E3F719E5, 005C (r1 PTLTD XSDT 6040000 LTP 0)
ACPI: FACP E3F76AB0, 00F4 (r3 NWS 3U4P 6040000 PTEC F4240)
ACPI: DSDT E3F71A41, 4FFB (r1 NWS 3U4P 6040000 MSFT 100000E)
ACPI: FACS E3F7FFC0, 0040
ACPI: HPET E3F76BA4, 0038 (r1 NWS 3U4P 6040000 PTEC 0)
ACPI: APIC E3F76BDC, 00FA (r1 PTLTD APIC 6040000 LTP 0)
ACPI: SPCR E3F76CD6, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
ACPI: SSDT E3F76D26, 009D (r1 NWS NEWISYS 6040000 LTP 1)
ACPI: SSDT E3F76DC3, 009D (r1 NWS NEWISYS 6040000 LTP 1)
ACPI: SRAT E3F76E60, 01A0 (r1 NWS 3U4P 6040000 NWS 1)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: PXM 2 -> APIC 4 -> Node 2
SRAT: PXM 2 -> APIC 5 -> Node 2
SRAT: PXM 3 -> APIC 6 -> Node 3
SRAT: PXM 3 -> APIC 7 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 153) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-e4000000
Entering add_active_range(0, 0, 153) 1 entries of 3200 used
Entering add_active_range(0, 256, 933744) 1 entries of 3200 used
SRAT: Node 0 PXM 0 0-200000000
Entering add_active_range(0, 0, 153) 2 entries of 3200 used
Entering add_active_range(0, 256, 933744) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 2097152) 2 entries of 3200 used
SRAT: Node 1 PXM 1 200000000-400000000
Entering add_active_range(1, 2097152, 4194304) 3 entries of 3200 used
SRAT: Node 2 PXM 2 400000000-600000000
Entering add_active_range(2, 4194304, 6291456) 4 entries of 3200 used
SRAT: Node 3 PXM 3 600000000-800000000
Entering add_active_range(3, 6291456, 8388608) 5 entries of 3200 used
NUMA: Using 33 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000200000000
NODE_DATA [0000000000029000 - 000000000002ffff]
bootmap [0000000000030000 - 000000000006ffff] pages 40
Bootmem setup node 1 0000000200000000-0000000400000000
NODE_DATA [0000000200000000 - 0000000200006fff]
bootmap [0000000200007000 - 0000000200046fff] pages 40
Bootmem setup node 2 0000000400000000-0000000600000000
NODE_DATA [0000000400000000 - 0000000400006fff]
bootmap [0000000400007000 - 0000000400046fff] pages 40
Bootmem setup node 3 0000000600000000-0000000800000000
NODE_DATA [0000000600000000 - 0000000600006fff]
bootmap [0000000600007000 - 0000000600046fff] pages 40
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-8bcfe7] TEXT DATA BSS
early res: 3 [99c00-9cbff] EBDA
early res: 4 [8000-28fff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
[ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
[ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
[ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
[ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0
[ffffe20003800000-ffffe200039fffff] PMD ->ffff810007a00000 on node 0
[ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007e00000 on node 0
[ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008200000 on node 0
[ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008600000 on node 0
[ffffe20004000000-ffffe200041fffff] PMD ->ffff810008a00000 on node 0
[ffffe20004200000-ffffe200043fffff] PMD ->ffff810008e00000 on node 0
[ffffe20004400000-ffffe200045fffff] PMD ->ffff810009200000 on node 0
[ffffe20004600000-ffffe200047fffff] PMD ->ffff810009600000 on node 0
[ffffe20004800000-ffffe200049fffff] PMD ->ffff810009a00000 on node 0
[ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810009e00000 on node 0
[ffffe20004c00000-ffffe20004dfffff] PMD ->ffff81000a200000 on node 0
[ffffe20004e00000-ffffe20004ffffff] PMD ->ffff81000a600000 on node 0
[ffffe20005000000-ffffe200051fffff] PMD ->ffff81000aa00000 on node 0
[ffffe20005200000-ffffe200053fffff] PMD ->ffff81000ae00000 on node 0
[ffffe20005400000-ffffe200055fffff] PMD ->ffff81000b200000 on node 0
[ffffe20005600000-ffffe200057fffff] PMD ->ffff81000b600000 on node 0
[ffffe20005800000-ffffe200059fffff] PMD ->ffff81000ba00000 on node 0
[ffffe20005a00000-ffffe20005bfffff] PMD ->ffff81000be00000 on node 0
[ffffe20005c00000-ffffe20005dfffff] PMD ->ffff81000c200000 on node 0
[ffffe20005e00000-ffffe20005ffffff] PMD ->ffff81000c600000 on node 0
[ffffe20006000000-ffffe200061fffff] PMD ->ffff81000ca00000 on node 0
[ffffe20006200000-ffffe200063fffff] PMD ->ffff81000ce00000 on node 0
[ffffe20006400000-ffffe200065fffff] PMD ->ffff81000d200000 on node 0
[ffffe20006600000-ffffe200067fffff] PMD ->ffff81000d600000 on node 0
[ffffe20006800000-ffffe200069fffff] PMD ->ffff81000da00000 on node 0
[ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000de00000 on node 0
[ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000e200000 on node 0
[ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000e600000 on node 0
[ffffe20007000000-ffffe200071fffff] PMD ->ffff810200200000 on node 1
[ffffe20007200000-ffffe200073fffff] PMD ->ffff810200400000 on node 1
[ffffe20007400000-ffffe200075fffff] PMD ->ffff810200600000 on node 1
[ffffe20007600000-ffffe200077fffff] PMD ->ffff810200800000 on node 1
[ffffe20007800000-ffffe200079fffff] PMD ->ffff810200a00000 on node 1
[ffffe20007a00000-ffffe20007bfffff] PMD ->ffff810200c00000 on node 1
[ffffe20007c00000-ffffe20007dfffff] PMD ->ffff810200e00000 on node 1
[ffffe20007e00000-ffffe20007ffffff] PMD ->ffff810201000000 on node 1
[ffffe20008000000-ffffe200081fffff] PMD ->ffff810201200000 on node 1
[ffffe20008200000-ffffe200083fffff] PMD ->ffff810201400000 on node 1
[ffffe20008400000-ffffe200085fffff] PMD ->ffff810201600000 on node 1
[ffffe20008600000-ffffe200087fffff] PMD ->ffff810201800000 on node 1
[ffffe20008800000-ffffe200089fffff] PMD ->ffff810201a00000 on node 1
[ffffe20008a00000-ffffe20008bfffff] PMD ->ffff810201c00000 on node 1
[ffffe20008c00000-ffffe20008dfffff] PMD ->ffff810201e00000 on node 1
[ffffe20008e00000-ffffe20008ffffff] PMD ->ffff810202000000 on node 1
[ffffe20009000000-ffffe200091fffff] PMD ->ffff810202200000 on node 1
[ffffe20009200000-ffffe200093fffff] PMD ->ffff810202400000 on node 1
[ffffe20009400000-ffffe200095fffff] PMD ->ffff810202600000 on node 1
[ffffe20009600000-ffffe200097fffff] PMD ->ffff810202800000 on node 1
[ffffe20009800000-ffffe200099fffff] PMD ->ffff810202a00000 on node 1
[ffffe20009a00000-ffffe20009bfffff] PMD ->ffff810202c00000 on node 1
[ffffe20009c00000-ffffe20009dfffff] PMD ->ffff810202e00000 on node 1
[ffffe20009e00000-ffffe20009ffffff] PMD ->ffff810203000000 on node 1
[ffffe2000a000000-ffffe2000a1fffff] PMD ->ffff810203200000 on node 1
[ffffe2000a200000-ffffe2000a3fffff] PMD ->ffff810203400000 on node 1
[ffffe2000a400000-ffffe2000a5fffff] PMD ->ffff810203600000 on node 1
[ffffe2000a600000-ffffe2000a7fffff] PMD ->ffff810203800000 on node 1
[ffffe2000a800000-ffffe2000a9fffff] PMD ->ffff810203a00000 on node 1
[ffffe2000aa00000-ffffe2000abfffff] PMD ->ffff810203c00000 on node 1
[ffffe2000ac00000-ffffe2000adfffff] PMD ->ffff810203e00000 on node 1
[ffffe2000ae00000-ffffe2000affffff] PMD ->ffff810204000000 on node 1
[ffffe2000b000000-ffffe2000b1fffff] PMD ->ffff810204200000 on node 1
[ffffe2000b200000-ffffe2000b3fffff] PMD ->ffff810204400000 on node 1
[ffffe2000b400000-ffffe2000b5fffff] PMD ->ffff810204600000 on node 1
[ffffe2000b600000-ffffe2000b7fffff] PMD ->ffff810204800000 on node 1
[ffffe2000b800000-ffffe2000b9fffff] PMD ->ffff810204a00000 on node 1
[ffffe2000ba00000-ffffe2000bbfffff] PMD ->ffff810204c00000 on node 1
[ffffe2000bc00000-ffffe2000bdfffff] PMD ->ffff810204e00000 on node 1
[ffffe2000be00000-ffffe2000bffffff] PMD ->ffff810205000000 on node 1
[ffffe2000c000000-ffffe2000c1fffff] PMD ->ffff810205200000 on node 1
[ffffe2000c200000-ffffe2000c3fffff] PMD ->ffff810205400000 on node 1
[ffffe2000c400000-ffffe2000c5fffff] PMD ->ffff810205600000 on node 1
[ffffe2000c600000-ffffe2000c7fffff] PMD ->ffff810205800000 on node 1
[ffffe2000c800000-ffffe2000c9fffff] PMD ->ffff810205a00000 on node 1
[ffffe2000ca00000-ffffe2000cbfffff] PMD ->ffff810205c00000 on node 1
[ffffe2000cc00000-ffffe2000cdfffff] PMD ->ffff810205e00000 on node 1
[ffffe2000ce00000-ffffe2000cffffff] PMD ->ffff810206000000 on node 1
[ffffe2000d000000-ffffe2000d1fffff] PMD ->ffff810206200000 on node 1
[ffffe2000d200000-ffffe2000d3fffff] PMD ->ffff810206400000 on node 1
[ffffe2000d400000-ffffe2000d5fffff] PMD ->ffff810206600000 on node 1
[ffffe2000d600000-ffffe2000d7fffff] PMD ->ffff810206800000 on node 1
[ffffe2000d800000-ffffe2000d9fffff] PMD ->ffff810206a00000 on node 1
[ffffe2000da00000-ffffe2000dbfffff] PMD ->ffff810206c00000 on node 1
[ffffe2000dc00000-ffffe2000ddfffff] PMD ->ffff810206e00000 on node 1
[ffffe2000de00000-ffffe2000dffffff] PMD ->ffff810207000000 on node 1
[ffffe2000e000000-ffffe2000e1fffff] PMD ->ffff810400200000 on node 2
[ffffe2000e200000-ffffe2000e3fffff] PMD ->ffff810400400000 on node 2
[ffffe2000e400000-ffffe2000e5fffff] PMD ->ffff810400600000 on node 2
[ffffe2000e600000-ffffe2000e7fffff] PMD ->ffff810400800000 on node 2
[ffffe2000e800000-ffffe2000e9fffff] PMD ->ffff810400a00000 on node 2
[ffffe2000ea00000-ffffe2000ebfffff] PMD ->ffff810400c00000 on node 2
[ffffe2000ec00000-ffffe2000edfffff] PMD ->ffff810400e00000 on node 2
[ffffe2000ee00000-ffffe2000effffff] PMD ->ffff810401000000 on node 2
[ffffe2000f000000-ffffe2000f1fffff] PMD ->ffff810401200000 on node 2
[ffffe2000f200000-ffffe2000f3fffff] PMD ->ffff810401400000 on node 2
[ffffe2000f400000-ffffe2000f5fffff] PMD ->ffff810401600000 on node 2
[ffffe2000f600000-ffffe2000f7fffff] PMD ->ffff810401800000 on node 2
[ffffe2000f800000-ffffe2000f9fffff] PMD ->ffff810401a00000 on node 2
[ffffe2000fa00000-ffffe2000fbfffff] PMD ->ffff810401c00000 on node 2
[ffffe2000fc00000-ffffe2000fdfffff] PMD ->ffff810401e00000 on node 2
[ffffe2000fe00000-ffffe2000fffffff] PMD ->ffff810402000000 on node 2
[ffffe20010000000-ffffe200101fffff] PMD ->ffff810402200000 on node 2
[ffffe20010200000-ffffe200103fffff] PMD ->ffff810402400000 on node 2
[ffffe20010400000-ffffe200105fffff] PMD ->ffff810402600000 on node 2
[ffffe20010600000-ffffe200107fffff] PMD ->ffff810402800000 on node 2
[ffffe20010800000-ffffe200109fffff] PMD ->ffff810402a00000 on node 2
[ffffe20010a00000-ffffe20010bfffff] PMD ->ffff810402c00000 on node 2
[ffffe20010c00000-ffffe20010dfffff] PMD ->ffff810402e00000 on node 2
[ffffe20010e00000-ffffe20010ffffff] PMD ->ffff810403000000 on node 2
[ffffe20011000000-ffffe200111fffff] PMD ->ffff810403200000 on node 2
[ffffe20011200000-ffffe200113fffff] PMD ->ffff810403400000 on node 2
[ffffe20011400000-ffffe200115fffff] PMD ->ffff810403600000 on node 2
[ffffe20011600000-ffffe200117fffff] PMD ->ffff810403800000 on node 2
[ffffe20011800000-ffffe200119fffff] PMD ->ffff810403a00000 on node 2
[ffffe20011a00000-ffffe20011bfffff] PMD ->ffff810403c00000 on node 2
[ffffe20011c00000-ffffe20011dfffff] PMD ->ffff810403e00000 on node 2
[ffffe20011e00000-ffffe20011ffffff] PMD ->ffff810404000000 on node 2
[ffffe20012000000-ffffe200121fffff] PMD ->ffff810404200000 on node 2
[ffffe20012200000-ffffe200123fffff] PMD ->ffff810404400000 on node 2
[ffffe20012400000-ffffe200125fffff] PMD ->ffff810404600000 on node 2
[ffffe20012600000-ffffe200127fffff] PMD ->ffff810404800000 on node 2
[ffffe20012800000-ffffe200129fffff] PMD ->ffff810404a00000 on node 2
[ffffe20012a00000-ffffe20012bfffff] PMD ->ffff810404c00000 on node 2
[ffffe20012c00000-ffffe20012dfffff] PMD ->ffff810404e00000 on node 2
[ffffe20012e00000-ffffe20012ffffff] PMD ->ffff810405000000 on node 2
[ffffe20013000000-ffffe200131fffff] PMD ->ffff810405200000 on node 2
[ffffe20013200000-ffffe200133fffff] PMD ->ffff810405400000 on node 2
[ffffe20013400000-ffffe200135fffff] PMD ->ffff810405600000 on node 2
[ffffe20013600000-ffffe200137fffff] PMD ->ffff810405800000 on node 2
[ffffe20013800000-ffffe200139fffff] PMD ->ffff810405a00000 on node 2
[ffffe20013a00000-ffffe20013bfffff] PMD ->ffff810405c00000 on node 2
[ffffe20013c00000-ffffe20013dfffff] PMD ->ffff810405e00000 on node 2
[ffffe20013e00000-ffffe20013ffffff] PMD ->ffff810406000000 on node 2
[ffffe20014000000-ffffe200141fffff] PMD ->ffff810406200000 on node 2
[ffffe20014200000-ffffe200143fffff] PMD ->ffff810406400000 on node 2
[ffffe20014400000-ffffe200145fffff] PMD ->ffff810406600000 on node 2
[ffffe20014600000-ffffe200147fffff] PMD ->ffff810406800000 on node 2
[ffffe20014800000-ffffe200149fffff] PMD ->ffff810406a00000 on node 2
[ffffe20014a00000-ffffe20014bfffff] PMD ->ffff810406c00000 on node 2
[ffffe20014c00000-ffffe20014dfffff] PMD ->ffff810406e00000 on node 2
[ffffe20014e00000-ffffe20014ffffff] PMD ->ffff810407000000 on node 2
[ffffe20015000000-ffffe200151fffff] PMD ->ffff810600200000 on node 3
[ffffe20015200000-ffffe200153fffff] PMD ->ffff810600400000 on node 3
[ffffe20015400000-ffffe200155fffff] PMD ->ffff810600600000 on node 3
[ffffe20015600000-ffffe200157fffff] PMD ->ffff810600800000 on node 3
[ffffe20015800000-ffffe200159fffff] PMD ->ffff810600a00000 on node 3
[ffffe20015a00000-ffffe20015bfffff] PMD ->ffff810600c00000 on node 3
[ffffe20015c00000-ffffe20015dfffff] PMD ->ffff810600e00000 on node 3
[ffffe20015e00000-ffffe20015ffffff] PMD ->ffff810601000000 on node 3
[ffffe20016000000-ffffe200161fffff] PMD ->ffff810601200000 on node 3
[ffffe20016200000-ffffe200163fffff] PMD ->ffff810601400000 on node 3
[ffffe20016400000-ffffe200165fffff] PMD ->ffff810601600000 on node 3
[ffffe20016600000-ffffe200167fffff] PMD ->ffff810601800000 on node 3
[ffffe20016800000-ffffe200169fffff] PMD ->ffff810601a00000 on node 3
[ffffe20016a00000-ffffe20016bfffff] PMD ->ffff810601c00000 on node 3
[ffffe20016c00000-ffffe20016dfffff] PMD ->ffff810601e00000 on node 3
[ffffe20016e00000-ffffe20016ffffff] PMD ->ffff810602000000 on node 3
[ffffe20017000000-ffffe200171fffff] PMD ->ffff810602200000 on node 3
[ffffe20017200000-ffffe200173fffff] PMD ->ffff810602400000 on node 3
[ffffe20017400000-ffffe200175fffff] PMD ->ffff810602600000 on node 3
[ffffe20017600000-ffffe200177fffff] PMD ->ffff810602800000 on node 3
[ffffe20017800000-ffffe200179fffff] PMD ->ffff810602a00000 on node 3
[ffffe20017a00000-ffffe20017bfffff] PMD ->ffff810602c00000 on node 3
[ffffe20017c00000-ffffe20017dfffff] PMD ->ffff810602e00000 on node 3
[ffffe20017e00000-ffffe20017ffffff] PMD ->ffff810603000000 on node 3
[ffffe20018000000-ffffe200181fffff] PMD ->ffff810603200000 on node 3
[ffffe20018200000-ffffe200183fffff] PMD ->ffff810603400000 on node 3
[ffffe20018400000-ffffe200185fffff] PMD ->ffff810603600000 on node 3
[ffffe20018600000-ffffe200187fffff] PMD ->ffff810603800000 on node 3
[ffffe20018800000-ffffe200189fffff] PMD ->ffff810603a00000 on node 3
[ffffe20018a00000-ffffe20018bfffff] PMD ->ffff810603c00000 on node 3
[ffffe20018c00000-ffffe20018dfffff] PMD ->ffff810603e00000 on node 3
[ffffe20018e00000-ffffe20018ffffff] PMD ->ffff810604000000 on node 3
[ffffe20019000000-ffffe200191fffff] PMD ->ffff810604200000 on node 3
[ffffe20019200000-ffffe200193fffff] PMD ->ffff810604400000 on node 3
[ffffe20019400000-ffffe200195fffff] PMD ->ffff810604600000 on node 3
[ffffe20019600000-ffffe200197fffff] PMD ->ffff810604800000 on node 3
[ffffe20019800000-ffffe200199fffff] PMD ->ffff810604a00000 on node 3
[ffffe20019a00000-ffffe20019bfffff] PMD ->ffff810604c00000 on node 3
[ffffe20019c00000-ffffe20019dfffff] PMD ->ffff810604e00000 on node 3
[ffffe20019e00000-ffffe20019ffffff] PMD ->ffff810605000000 on node 3
[ffffe2001a000000-ffffe2001a1fffff] PMD ->ffff810605200000 on node 3
[ffffe2001a200000-ffffe2001a3fffff] PMD ->ffff810605400000 on node 3
[ffffe2001a400000-ffffe2001a5fffff] PMD ->ffff810605600000 on node 3
[ffffe2001a600000-ffffe2001a7fffff] PMD ->ffff810605800000 on node 3
[ffffe2001a800000-ffffe2001a9fffff] PMD ->ffff810605a00000 on node 3
[ffffe2001aa00000-ffffe2001abfffff] PMD ->ffff810605c00000 on node 3
[ffffe2001ac00000-ffffe2001adfffff] PMD ->ffff810605e00000 on node 3
[ffffe2001ae00000-ffffe2001affffff] PMD ->ffff810606000000 on node 3
[ffffe2001b000000-ffffe2001b1fffff] PMD ->ffff810606200000 on node 3
[ffffe2001b200000-ffffe2001b3fffff] PMD ->ffff810606400000 on node 3
[ffffe2001b400000-ffffe2001b5fffff] PMD ->ffff810606600000 on node 3
[ffffe2001b600000-ffffe2001b7fffff] PMD ->ffff810606800000 on node 3
[ffffe2001b800000-ffffe2001b9fffff] PMD ->ffff810606a00000 on node 3
[ffffe2001ba00000-ffffe2001bbfffff] PMD ->ffff810606c00000 on node 3
[ffffe2001bc00000-ffffe2001bdfffff] PMD ->ffff810606e00000 on node 3
[ffffe2001be00000-ffffe2001bffffff] PMD ->ffff810607000000 on node 3
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 8388608
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0 -> 153
0: 256 -> 933744
0: 1048576 -> 2097152
1: 2097152 -> 4194304
2: 4194304 -> 6291456
3: 6291456 -> 8388608On node 0 totalpages: 1982217
DMA zone: 56 pages used for memmap
DMA zone: 1765 pages reserved
DMA zone: 2172 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 915368 pages, LIFO batch:31
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
On node 1 totalpages: 2097152
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
On node 2 totalpages: 2097152
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
On node 3 totalpages: 2097152
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0xf008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
Processor #4
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
Processor #5
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xe4000000] gsi_base[24])
IOAPIC[1]: apic_id 9, address 0xe4000000, GSI 24-27
ACPI: IOAPIC (id[0x0a] address[0xe4001000] gsi_base[28])
IOAPIC[2]: apic_id 10, address 0xe4001000, GSI 28-31
ACPI: IOAPIC (id[0x0b] address[0xe5b01000] gsi_base[32])
IOAPIC[3]: apic_id 11, address 0xe5b01000, GSI 32-35
ACPI: IOAPIC (id[0x0c] address[0xe5b03000] gsi_base[36])
IOAPIC[4]: apic_id 12, address 0xe5b03000, GSI 36-39
ACPI: IOAPIC (id[0x0d] address[0xe5b05000] gsi_base[40])
IOAPIC[5]: apic_id 13, address 0xe5b05000, GSI 40-43
ACPI: IOAPIC (id[0x0e] address[0xe5b07000] gsi_base[44])
IOAPIC[6]: apic_id 14, address 0xe5b07000, GSI 44-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x102282a0 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
mapped APIC to ffffffffff5fb000 ( fee00000)
mapped IOAPIC to ffffffffff5fa000 (00000000fec00000)
mapped IOAPIC to ffffffffff5f9000 (00000000e4000000)
mapped IOAPIC to ffffffffff5f8000 (00000000e4001000)
mapped IOAPIC to ffffffffff5f7000 (00000000e5b01000)
mapped IOAPIC to ffffffffff5f6000 (00000000e5b03000)
mapped IOAPIC to ffffffffff5f5000 (00000000e5b05000)
mapped IOAPIC to ffffffffff5f4000 (00000000e5b07000)
PM: Registered nosave memory: 0000000000099000 - 000000000009a000
PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
PM: Registered nosave memory: 00000000e3f70000 - 00000000e3f77000
PM: Registered nosave memory: 00000000e3f77000 - 00000000e3f80000
PM: Registered nosave memory: 00000000e3f80000 - 00000000e4000000
PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000)
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PERCPU: Allocating 27136 bytes of per cpu data
Built 4 zonelists in Zone order, mobility grouping on. Total pages: 8157220
Policy zone: Normal
Kernel command line: root=/dev/sda2 splash=silent console=tty0 resume=/dev/sda1 apic=debug loglevel=8
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 2393.187 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ 0 size 32 MB
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 10000000
Memory: 32565416k/33554432k available (3829k kernel code, 529276k reserved, 1738k data, 360k init)
CPA: page pool initialized 512 of 512 pages preallocated
hpet clockevent registered
Calibrating delay using timer specific routine.. 4790.95 BogoMIPS (lpj=9581912)
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20070126
masked ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 8-0 not connected.
IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-9 -> 0x39 -> IRQ 9 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (8-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
IO-APIC (apicid-pin) 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 10-0, 10-1, 10-2, 10-3, 11-0, 11-1, 11-2, 11-3, 12-0, 12-1, 12-2, 12-3, 13-0, 13-1, 13-2, 13-3, 14-0, 14-1, 14-2, 14-3 not connected.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
Using local APIC timer interrupts.
APIC timer calibration result 12464523
Detected 12.464 MHz APIC timer.
Booting processor 1/8 APIC 0x1
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 4786.58 BogoMIPS (lpj=9573179)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 880 stepping 02
Booting processor 2/8 APIC 0x2
Initializing CPU#2
masked ExtINT on CPU#2
Calibrating delay using timer specific routine.. 4786.49 BogoMIPS (lpj=9572982)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual Core AMD Opteron(tm) Processor 880 stepping 02
Booting processor 3/8 APIC 0x3
Initializing CPU#3
masked ExtINT on CPU#3
Calibrating delay using timer specific routine.. 4786.48 BogoMIPS (lpj=9572963)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 880 stepping 02
Booting processor 4/8 APIC 0x4
Initializing CPU#4
masked ExtINT on CPU#4
Calibrating delay using timer specific routine.. 4786.48 BogoMIPS (lpj=9572962)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 4/4 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
Dual Core AMD Opteron(tm) Processor 880 stepping 02
Booting processor 5/8 APIC 0x5
Initializing CPU#5
masked ExtINT on CPU#5
Calibrating delay using timer specific routine.. 4786.48 BogoMIPS (lpj=9572961)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 5/5 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 880 stepping 02
Booting processor 6/8 APIC 0x6
Initializing CPU#6
masked ExtINT on CPU#6
Calibrating delay using timer specific routine.. 4786.37 BogoMIPS (lpj=9572752)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 6/6 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
Dual Core AMD Opteron(tm) Processor 880 stepping 02
Booting processor 7/8 APIC 0x7
Initializing CPU#7
masked ExtINT on CPU#7
Calibrating delay using timer specific routine.. 4786.48 BogoMIPS (lpj=9572964)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 7/7 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 880 stepping 02
Brought up 8 CPUsnet_namespace: 416 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.THOR._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.Z000._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.Z002._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:20)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.Z003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.Z004._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.Z005._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.Z006._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 10 11) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
IOAPIC[0]: Set routing entry (8-19 -> 0x49 -> IRQ 19 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (8-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (8-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
number of MP IRQ sources: 15.
number of IO-APIC #8 registers: 24.
number of IO-APIC #9 registers: 4.
number of IO-APIC #10 registers: 4.
number of IO-APIC #11 registers: 4.
number of IO-APIC #12 registers: 4.
number of IO-APIC #13 registers: 4.
number of IO-APIC #14 registers: 4.
testing the IO APIC.......................
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 00170011
....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 08000000
....... : arbitration: 08
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00 01 0FF 0 0 0 0 0 1 1 31 02 0FF 0 0 0 0 0 1 1 30 03 0FF 0 0 0 0 0 1 1 33 04 0FF 0 0 0 0 0 1 1 34 05 0FF 0 0 0 0 0 1 1 35 06 0FF 0 0 0 0 0 1 1 36 07 0FF 0 0 0 0 0 1 1 37 08 0FF 0 0 0 0 0 1 1 38 09 0FF 0 1 0 1 0 1 1 39 0a 0FF 0 0 0 0 0 1 1 3A 0b 0FF 0 0 0 0 0 1 1 3B 0c 0FF 0 0 0 0 0 1 1 3C 0d 0FF 0 0 0 0 0 1 1 3D 0e 0FF 0 0 0 0 0 1 1 3E 0f 0FF 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 0FF 1 1 0 1 0 1 1 49 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00
IO APIC #9......
.... register #00: 09000000
....... : physical APIC id: 09
.... register #01: 00030011
....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00 01 000 1 0 0 0 0 0 0 00 02 000 1 0 0 0 0 0 0 00 03 000 1 0 0 0 0 0 0 00
IO APIC #10......
.... register #00: 0A000000
....... : physical APIC id: 0A
.... register #01: 00030011
....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00 01 000 1 0 0 0 0 0 0 00 02 000 1 0 0 0 0 0 0 00 03 000 1 0 0 0 0 0 0 00
IO APIC #11......
.... register #00: 0B000000
....... : physical APIC id: 0B
.... register #01: 00030011
....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00 01 000 1 0 0 0 0 0 0 00 02 000 1 0 0 0 0 0 0 00 03 000 1 0 0 0 0 0 0 00
IO APIC #12......
.... register #00: 0C000000
....... : physical APIC id: 0C
.... register #01: 00030011
....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00 01 000 1 0 0 0 0 0 0 00 02 000 1 0 0 0 0 0 0 00 03 000 1 0 0 0 0 0 0 00
IO APIC #13......
.... register #00: 0D000000
....... : physical APIC id: 0D
.... register #01: 00030011
....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00 01 000 1 0 0 0 0 0 0 00 02 000 1 0 0 0 0 0 0 00 03 000 1 0 0 0 0 0 0 00
IO APIC #14......
.... register #00: 0E000000
....... : physical APIC id: 0E
.... register #01: 00030011
....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00 01 000 1 0 0 0 0 0 0 00 02 000 1 0 0 0 0 0 0 00 03 000 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ19 -> 0:19
.................................... done.
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 10000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 1
hpet0: 3 32-bit timers, 14318180 Hz
Time: hpet clocksource has been installed.
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0xc0000-0xc7fff has been reserved
system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:00: iomem range 0xffc00000-0xfff7ffff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:00: iomem range 0xe4000000-0xe4000fff has been reserved
system 00:00: iomem range 0xe4001000-0xe4001fff has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x1100-0x117f has been reserved
system 00:09: ioport range 0x1180-0x11ff has been reserved
system 00:09: ioport range 0xca2-0xca3 has been reserved
system 00:09: ioport range 0xb78-0xb7b has been reserved
system 00:09: ioport range 0x190-0x193 has been reserved
system 00:09: ioport range 0x290-0x291 has been reserved
system 00:09: ioport range 0xcf9-0xcf9 could not be reserved
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: 0xe4100000-0xe57fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: 2000-2fff
MEM window: 0xe5800000-0xe58fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:20:01.0
IO window: 4000-4fff
MEM window: 0xe6000000-0xe6ffffff
PREFETCH window: 0x00000000ec000000-0x00000000efffffff
PCI: Bridge: 0000:20:02.0
IO window: 3000-3fff
MEM window: 0xe7000000-0xe7ffffff
PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff
PCI: Bridge: 0000:20:03.0
IO window: 5000-5fff
MEM window: 0xe8000000-0xe8ffffff
PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
PCI: Bridge: 0000:20:04.0
IO window: 6000-6fff
MEM window: 0xe9000000-0xe9ffffff
PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
IOAPIC[3]: Set routing entry (11-0 -> 0x51 -> IRQ 32 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:20:01.0[A] -> GSI 32 (level, low) -> IRQ 32
IOAPIC[4]: Set routing entry (12-0 -> 0x59 -> IRQ 36 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:20:02.0[A] -> GSI 36 (level, low) -> IRQ 36
IOAPIC[5]: Set routing entry (13-0 -> 0x61 -> IRQ 40 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:20:03.0[A] -> GSI 40 (level, low) -> IRQ 40
IOAPIC[6]: Set routing entry (14-0 -> 0x69 -> IRQ 44 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:20:04.0[A] -> GSI 44 (level, low) -> IRQ 44
NET: Registered protocol family 2
IP route cache hash table entries: 1048576 (order: 11, 8388608 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 [email protected]).
SGI XFS with large block/inode numbers, no debug enabled
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:01:05.0: Boot video device
pci 0000:20:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:20:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:20:02.0: MSI quirk detected; subordinate MSI disabled
pci 0000:20:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:20:03.0: MSI quirk detected; subordinate MSI disabled
pci 0000:20:03.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:20:04.0: MSI quirk detected; subordinate MSI disabled
pci 0000:20:04.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: ACPI0007:03 is registered as cooling_device3
ACPI: ACPI0007:04 is registered as cooling_device4
ACPI: ACPI0007:05 is registered as cooling_device5
ACPI: ACPI0007:06 is registered as cooling_device6
ACPI: ACPI0007:07 is registered as cooling_device7
Real Time Clock Driver v1.12achpet_resources: 0xfed00000 is busy
AMD768 RNG detected
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
IOAPIC[4]: Set routing entry (12-1 -> 0x71 -> IRQ 37 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:25:01.0[A] -> GSI 37 (level, low) -> IRQ 37
ttyS1: detected caps 00000700 should be 00000100
0000:25:01.0: ttyS1 at I/O 0x3020 (irq = 37) is a 16C950/954
ttyS2: detected caps 00000700 should be 00000100
0000:25:01.0: ttyS2 at I/O 0x3028 (irq = 37) is a 16C950/954
ttyS3: detected caps 00000700 should be 00000100
0000:25:01.0: ttyS3 at I/O 0x3030 (irq = 37) is a 16C950/954
Couldn't register serial port 0000:25:01.0: -28
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.87 (December 20, 2007)
IOAPIC[1]: Set routing entry (9-1 -> 0x79 -> IRQ 25 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 25 (level, low) -> IRQ 25
eth0: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:09:3d:12:1c:37
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
IOAPIC[1]: Set routing entry (9-2 -> 0x81 -> IRQ 26 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:02:02.1[B] -> GSI 26 (level, low) -> IRQ 26
eth1: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:09:3d:12:1c:38
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
console [netcon0] enabled
netconsole: network logging started
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
AMD8111: IDE controller (0x1022:0x7469 rev 0x03) at PCI slot 0000:00:07.1
AMD8111: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:PIO, hdb:PIO
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:PIOProbing IDE interface ide0...
Probing IDE interface ide1...
hdc: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
hdc: ATAPI 24X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
IOAPIC[1]: Set routing entry (9-3 -> 0x89 -> IRQ 27 Mode:1 Active:1)
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 27 (level, low) -> IRQ 27
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032300h, Ports=1, MaxQ=222, IRQ=27
scsi 0:0:0:0: Direct-Access FUJITSU MAU3036NC 0104 PQ: 0 ANSI: 3
target0:0:0: Beginning Domain Validation
target0:0:0: Ending Domain Validation
target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 0:0:0:0: [sda] 71819496 512-byte hardware sectors (36772 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: b3 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 71819496 512-byte hardware sectors (36772 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: b3 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:6:0: Processor SDR GEM318P 1 PQ: 0 ANSI: 2
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: asynchronous
scsi 0:0:6:0: Attached scsi generic sg1 type 3
ieee1394: raw1394: /dev/raw1394 device initializedohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19ohci_hcd 0000:01:00.0: OHCI Host Controllerohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1ohci_hcd 0000:01:00.0: irq 19, io mem 0xe4120000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19ohci_hcd 0000:01:00.1: OHCI Host Controllerohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2ohci_hcd 0000:01:00.1: irq 19, io mem 0xe4121000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v3.0
usb 1-1: new low speed USB device using ohci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
cpuidle: using governor ladder
input: SILITEK USB Keyboard and Mouse as /class/input/input2
input: USB HID v1.00 Keyboard [SILITEK USB Keyboard and Mouse] on usb-0000:01:00.0-1
input: SILITEK USB Keyboard and Mouse as /class/input/input3
input: USB HID v1.00 Mouse [SILITEK USB Keyboard and Mouse] on usb-0000:01:00.0-1
usbcore: registered new interface driver usbhid /mdata/lwork/polaris1/travis/workareas/Linus/linux-2.6/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
powernow-k8: Found 4 Dual Core AMD Opteron(tm) Processor 880 processors (8 cpu cores) (version 2.20.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 360k freed
Adding 1052216k swap on /dev/sda1. Priority:42 extents:1 across:1052216k ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers presentend_request: I/O error, dev fd0, sector 0end_request: I/O error, dev fd0, sector 0
program hwscan is using a deprecated SCSI ioctl, please convert it to SG_IOend_request: I/O error, dev fd0, sector 0end_request: I/O error, dev fd0, sector 0
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
In reply to Mel GormanQuoted 10 lines · Mel Gorman
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "
__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).
This should completely undo the change to 16 bit apic ids until we can figure out the problem with the memory-less nodes. I checked it on both the numa and non-numa x86_64 box.
Thanks,
Mike
--- arch/x86/kernel/acpi/boot.c | 2 +- arch/x86/kernel/apic_64.c | 2 +- arch/x86/kernel/genapic_64.c | 4 ++-- arch/x86/kernel/mpparse_64.c | 6 +++--- arch/x86/mm/numa_64.c | 2 +- include/asm-x86/smp_64.h | 7 ++++--- 6 files changed, 12 insertions(+), 11 deletions(-)
arch/x86/kernel/acpi/boot.c +1 -1
@@ -558,7 +558,7 @@ EXPORT_SYMBOL(acpi_map_lsapic);int acpi_unmap_lsapic (int cpu) { -per_cpu (x86_cpu_to_apicid, cpu) =-1 ; +per_cpu (x86_cpu_to_apicid, cpu) =BAD_APICID ;cpu_clear (cpu, cpu_present_map); num_processors--;
arch/x86/kernel/apic_64.c +1 -1
@@ -1180,7 +1180,7 @@ __cpuinit int apic_is_clustered_box(void {int i, clusters, zeros;unsigned id; -u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; +u8 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;DECLARE_BITMAP (clustermap,NUM_APIC_CLUSTERS );bitmap_zero (clustermap,NUM_APIC_CLUSTERS );
arch/x86/kernel/genapic_64.c +2 -2
@@ -25,10 +25,10 @@#endif /* which logical CPU number maps to which CPU (physical APIC ID) */ -u16 x86_cpu_to_apicid_init[NR_CPUS ]__initdata +u8 x86_cpu_to_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_cpu_to_apicid_early_ptr; -DEFINE_PER_CPU (u16, x86_cpu_to_apicid) =BAD_APICID ; +DEFINE_PER_CPU (u8, x86_cpu_to_apicid) =BAD_APICID ;EXPORT_PER_CPU_SYMBOL (x86_cpu_to_apicid);struct genapic __read_mostly *genapic = &apic_flat;
arch/x86/kernel/mpparse_64.c +3 -3
@@ -67,7 +67,7 @@ unsigned disabled_cpus __cpuinitdata;/* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map =PHYSID_MASK_NONE ; -u16 x86_bios_cpu_apicid_init[NR_CPUS ]__initdata +u8 x86_bios_cpu_apicid_init[NR_CPUS ]__initdata = { [0 ...NR_CPUS -1 ] =BAD_APICID };void *x86_bios_cpu_apicid_early_ptr;DEFINE_PER_CPU (u16, x86_bios_cpu_apicid) =BAD_APICID ;
@@ -130,8 +130,8 @@ static void __cpuinit MP_processor_info( }/* are we being called early in kernel startup? */ if (x86_cpu_to_apicid_early_ptr) { -u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; -u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; +u8 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; +u8 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; cpu_to_apicid[cpu] = m->mpc_apicid; bios_cpu_apicid[cpu] = m->mpc_apicid;
arch/x86/mm/numa_64.c +1 -1
@@ -619,7 +619,7 @@ void __init init_cpu_to_node(void)int i;for (i =0 ; i <NR_CPUS ; i++) { -u16 apicid = x86_cpu_to_apicid_init[i]; +u8 apicid = x86_cpu_to_apicid_init[i];if (apicid ==BAD_APICID )continue ;
include/asm-x86/smp_64.h +4 -3
@@ -26,15 +26,16 @@ extern void unlock_ipi_call_lock(void);extern int smp_call_function_mask (cpumask_t mask,void (*func)(void *),void *info,int wait); -extern u16 __initdata x86_cpu_to_apicid_init[]; -extern u16 __initdata x86_bios_cpu_apicid_init[]; +extern u8 __initdata x86_cpu_to_apicid_init[]; +extern u8 __initdata x86_bios_cpu_apicid_init[];extern void *x86_cpu_to_apicid_early_ptr;extern void *x86_bios_cpu_apicid_early_ptr; +DECLARE_PER_CPU (u8, x86_cpu_to_apicid);/* physical ID */ +extern u8 bios_cpu_apicid[];DECLARE_PER_CPU (cpumask_t, cpu_sibling_map);DECLARE_PER_CPU (cpumask_t, cpu_core_map);DECLARE_PER_CPU (u16, cpu_llc_id); -DECLARE_PER_CPU (u16, x86_cpu_to_apicid);DECLARE_PER_CPU (u16, x86_bios_cpu_apicid);static inline int cpu_present_to_apicid (int mps_cpu)
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
Quoted 13 lines · Mike Travis
Quoted 10 lines · Mel Gorman
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "
__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).
Quoted 7 lines
This should completely undo the change to 16 bit apic ids until we can figure out the problem with the memory-less nodes. I checked it on both the numa and non-numa
x86_64box.Thanks,
Mike
Hi Mel,
Did you get a chance to try out this patch to see if it cleared up the problem booting on your x86_64 numa box?
Thanks,
Mike
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
On (19/02/08 08:12), Mike Travis didst pronounce:
Quoted 18 lines
Quoted 17 lines · Mike Travis
Quoted 10 lines · Mel Gorman
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "
__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).This should completely undo the change to 16 bit apic ids until we can figure out the problem with the memory-less nodes. I checked it on both the numa and non-numa
x86_64box.
Quoted 9 lines
Quoted 3 lines
Thanks,
MikeHi Mel,
Did you get a chance to try out this patch to see if it cleared up the problem booting on your
x86_64numa box?
I initially missed the patch in the bomb of mail that came through over the weekend, sorry. The machine still fails to boot with this patch applied. dmesg is below but it looks like essentially the same failure. I'm offline from tomorrow for a week as well so won't be able to test another version until I'm back properly :(
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-autobench ro root=/dev/VolGroup00/LogVol00 console=tty0 console
=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 AB
AT:1203448759 loglevel=8
[Linux-bzImage, setup=0x2e00, size=0x2436f8]
initrd /initrd-autobench.img
[Linux-initrd @ 0x37e5f000, 0x19097c bytes]
Linux version 2.6.24-mm1-autokern1 ([email protected]) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Tue Feb 19 12:52:43 CST 2008 Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1203448759 loglevel=8 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffcddc0 (usable)
BIOS-e820: 000000003ffcddc0 - 000000003ffd0000 (ACPI data)
BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Malformed early option 'loglevel'
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 262093) 1 entries of 3200 usedend_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
ACPI: FACS 3FFCFCC0, 0040
ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 262093) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000003ffcd000
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-a0566f] TEXT DATA BSS
early res: 3 [37e5f000-37fef97b] RAMDISK
early res: 4 [9d400-a03ff] EBDA
early res: 5 [8000-afff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001600000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810001c00000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002000000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002200000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002600000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810002800000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810002c00000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810002e00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003200000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810003400000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810003800000 on node 0
[ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810003a00000 on node 0
[ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810003e00000 on node 0
[ffffe20002000000-ffffe200021fffff] PMD ->ffff810004000000 on node 0
sizeof(struct page) = 136
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 157
0: 256 -> 262093On node 0 totalpages: 261994
DMA zone: 136 pages used for memmap
DMA zone: 2064 pages reserved
DMA zone: 1797 pages, LIFO batch:0
DMA32 zone: 8566 pages used for memmap
DMA32 zone: 249431 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2208
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 13, address 0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]: apic_id 12, address 0xfec20000, GSI 48-51
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10228203 base: 0xfecff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 65560 bytes of per cpu data
cpu with no node 2, num_online_nodes 1
cpu with no node 3, num_online_nodes 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 251228
Policy zone: DMA32
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=no autobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1203448759 loglevel=8 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 1993.782 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
Checking aperture...
Node 0: aperture @ dc000000 size 64 MB
Node 1: aperture @ dc000000 size 64 MB
Memory: 1002864k/1048372k available (3149k kernel code, 45112k reserved, 1471k data, 396k init)
hpet clockevent registered
Calibrating delay using timer specific routine.. 3991.58 BogoMIPS (lpj=7983168)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12461132
Detected 12.461 MHz APIC timer.
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3987.60 BogoMIPS (lpj=7975215)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 270 stepping 02
BUG: unable to handle kernel paging request at 0000000000007358 IP: [<ffffffff8026ceec>] __alloc_pages+0x4f/0x403 PGD 0 Oops: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.24-mm1-autokern1 #1 RIP: 0010:[<ffffffff8026ceec>] [<ffffffff8026ceec>] __alloc_pages+0x4f/0x403 RSP: 0000:ffff81003fa2fbc0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000412d0 RCX: 0000000000007358 RDX: 0000000000000010 RSI: 0000000000000605 RDI: ffffffff805c3375 RBP: ffff81003fa2fc30 R08: 0000000000000000 R09: ffff81003fa2d060 R10: ffff81000000b000 R11: 000412d000000010 R12: 00000000000412d0 R13: 0000000000007350 R14: 0000000000000000 R15: ffff81003fa29340 FS: 0000000000000000(0000) GS:ffffffff80684000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000007358 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003fa2e000, task ffff81003fa2d060) Stack: 000000100000c5c8 ffffffff00000000 ffff81003fa2d060 0000000000007358 000000003fa2fd60 0000000000000000 00000000000000d0 ffff81000000fa70 0000000000000000 00000000000412d0 ffff81003f801080 0000000000000040 Call Trace: [<ffffffff8028ab2c>] kmem_getpages+0xd5/0x1ad [<ffffffff8028aed0>] cache_grow+0xa8/0x222 [<ffffffff8028b2d8>] ____cache_alloc_node+0xff/0x125 [<ffffffff8028adcf>] kmem_cache_alloc_node+0x114/0x144 [<ffffffff8050ac0b>] cpuup_callback+0x8e/0x331 [<ffffffff8050ff96>] notifier_call_chain+0x33/0x65 [<ffffffff8024a061>] __raw_notifier_call_chain+0x9/0xb [<ffffffff8050a258>] _cpu_up+0x6c/0x103 [<ffffffff8050a346>] cpu_up+0x57/0x67 [<ffffffff808ba689>] kernel_init+0xc5/0x2fe [<ffffffff8020cd88>] child_rip+0xa/0x12 [<ffffffff8036d824>] ? acpi_ds_init_one_object+0x0/0x88 [<ffffffff808ba5c4>] ? kernel_init+0x0/0x2fe [<ffffffff8020cd7e>] ? child_rip+0x0/0x12 Code: 00 83 e2 10 48 89 45 a0 89 55 94 74 16 be 05 06 00 00 48 c7 c7 75 33 5c 80 e8 cf db fb ff e8 3e f3 29 00 49 8d 4d 08 48 89 4d a8 <49> 83 7d 08 00 0f 84 39 03 00 00 44 89 e0 b9 44 00 00 00 4c 89 RIP [<ffffffff8026ceec>] __alloc_pages+0x4f/0x403 RSP <ffff81003fa2fbc0> CR2: 0000000000007358 ---[ end trace 4eaa2a86a8e2da22 ]--- Kernel panic - not syncing: Attempted to kill init!
Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
Quoted 27 lines · Mel Gorman
On (19/02/08 08:12), Mike Travis didst pronounce:
Quoted 17 lines
Quoted 16 lines · Mike Travis
Quoted 10 lines · Mel Gorman
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "
__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).This should completely undo the change to 16 bit apic ids until we can figure out the problem with the memory-less nodes. I checked it on both the numa and non-numa
x86_64box.Quoted 8 lines
Quoted 3 lines
Thanks,
MikeHi Mel,
Did you get a chance to try out this patch to see if it cleared up the problem booting on your
x86_64numa box?
Quoted 5 lines
I initially missed the patch in the bomb of mail that came through over the weekend, sorry. The machine still fails to boot with this patch applied. dmesg is below but it looks like essentially the same failure. I'm offline from tomorrow for a week as well so won't be able to test another version until I'm back properly :(
Ok, thanks, I'll continue looking into it. Unfortunately, the system I am testing on does not have remote access working. I'll be over in MV again tomorrow to try out some things. In the meantime, I'm trying to fake a node with zero memory to see if that duplicates the problem.
Thanks,
Mike
Quoted 204 lines
root (hd0,0)
Filesystem type is ext2fs, partition type0x83
kernel /vmlinuz-autobench ro root=/dev/VolGroup00/LogVol00 console=tty0 console
=ttyS1,19200 selinux=noautobench_args: root=/dev/mapper/VolGroup00-LogVol00 AB
AT:1203448759 loglevel=8
[Linux-bzImage, setup=0x2e00, size=0x2436f8]
initrd /initrd-autobench.img
[Linux-initrd @0x37e5f000,0x19097cbytes]
Linux version 2.6.24-mm1-autokern1 ([email protected]) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Tue Feb 19 12:52:43 CST 2008 Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=noautobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1203448759 loglevel=8 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 -000000000009d400(usable)
BIOS-e820:000000000009d400-00000000000a0000(reserved)
BIOS-e820:00000000000e0000- 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 -000000003ffcddc0(usable)
BIOS-e820:000000003ffcddc0-000000003ffd0000(ACPI data)
BIOS-e820:000000003ffd0000- 0000000040000000 (reserved)
BIOS-e820:00000000fec00000- 0000000100000000 (reserved)
Malformed early option 'loglevel'
Enteringadd_active_range(0, 0, 157)0 entries of 3200 used
Enteringadd_active_range(0, 256, 262093)1 entries of 3200 usedend_pfn_map= 1048576
DMI 2.3 present.
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
ACPI: FACS 3FFCFCC0, 0040
ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
Enteringadd_active_range(0, 0, 157)0 entries of 3200 used
Enteringadd_active_range(0, 256, 262093)1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000003ffcd000
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff]SMP_TRAMPOLINE
early res: 2 [200000-a0566f] TEXT DATA BSS
early res: 3 [37e5f000-37fef97b] RAMDISK
early res: 4 [9d400-a03ff] EBDA
early res: 5 [8000-afff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001400000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001600000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810001c00000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002000000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002200000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002600000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810002800000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810002c00000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810002e00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003200000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810003400000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810003800000 on node 0
[ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810003a00000 on node 0
[ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810003e00000 on node 0
[ffffe20002000000-ffffe200021fffff] PMD ->ffff810004000000 on node 0
sizeof(struct page) = 136
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges0: 0 -> 157 0: 256 -> 262093On node 0 totalpages: 261994
DMA zone: 136 pages used for memmap
DMA zone: 2064 pages reserved
DMA zone: 1797 pages, LIFO batch:0
DMA32 zone: 8566 pages used for memmap
DMA32 zone: 249431 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port:0x2208
ACPI: Local APIC address0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI:LAPIC_NMI(acpi_id[0x00] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x01] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x02] dfl dfl lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]:apic_id14, address0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]:apic_id13, address0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]:apic_id12, address0xfec20000, GSI 48-51
ACPI:INT_SRC_OVR(bus 0bus_irq0global_irq2 dfl dfl)
ACPI:INT_SRC_OVR(bus 0bus_irq11global_irq11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Setting APIC routing to flat
ACPI: HPET id:0x10228203base:0xfecff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 65560 bytes of per cpu data
cpu with no node 2,num_online_nodes1
cpu with no node 3,num_online_nodes1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 251228
Policy zone: DMA32
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS1,19200 selinux=noautobench_args: root=/dev/mapper/VolGroup00-LogVol00 ABAT:1203448759 loglevel=8 Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated againstPM_TIMER
Marking TSC unstable due to TSCs unsynchronizedtime.c: Detected 1993.782 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
Checking aperture...
Node 0: aperture @dc000000size 64 MB
Node 1: aperture @dc000000size 64 MB
Memory: 1002864k/1048372k available (3149k kernel code, 45112k reserved, 1471k data, 396k init)
hpet clockevent registered
Calibrating delay using timer specific routine.. 3991.58 BogoMIPS (lpj=7983168)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12461132
Detected 12.461 MHz APIC timer.
Booting processor 1/4 APIC0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3987.60 BogoMIPS (lpj=7975215)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 270 stepping 02BUG: unable to handle kernel paging request at 0000000000007358 IP: [<ffffffff8026ceec>] __alloc_pages+0x4f/0x403 PGD 0 Oops: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.24-mm1-autokern1 #1 RIP: 0010:[<ffffffff8026ceec>] [<ffffffff8026ceec>] __alloc_pages+0x4f/0x403 RSP: 0000:ffff81003fa2fbc0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000412d0 RCX: 0000000000007358 RDX: 0000000000000010 RSI: 0000000000000605 RDI: ffffffff805c3375 RBP: ffff81003fa2fc30 R08: 0000000000000000 R09: ffff81003fa2d060 R10: ffff81000000b000 R11: 000412d000000010 R12: 00000000000412d0 R13: 0000000000007350 R14: 0000000000000000 R15: ffff81003fa29340 FS: 0000000000000000(0000) GS:ffffffff80684000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000007358 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003fa2e000, task ffff81003fa2d060) Stack: 000000100000c5c8 ffffffff00000000 ffff81003fa2d060 0000000000007358 000000003fa2fd60 0000000000000000 00000000000000d0 ffff81000000fa70 0000000000000000 00000000000412d0 ffff81003f801080 0000000000000040 Call Trace: [<ffffffff8028ab2c>] kmem_getpages+0xd5/0x1ad [<ffffffff8028aed0>] cache_grow+0xa8/0x222 [<ffffffff8028b2d8>] ____cache_alloc_node+0xff/0x125 [<ffffffff8028adcf>] kmem_cache_alloc_node+0x114/0x144 [<ffffffff8050ac0b>] cpuup_callback+0x8e/0x331 [<ffffffff8050ff96>] notifier_call_chain+0x33/0x65 [<ffffffff8024a061>] __raw_notifier_call_chain+0x9/0xb [<ffffffff8050a258>] _cpu_up+0x6c/0x103 [<ffffffff8050a346>] cpu_up+0x57/0x67 [<ffffffff808ba689>] kernel_init+0xc5/0x2fe [<ffffffff8020cd88>] child_rip+0xa/0x12 [<ffffffff8036d824>] ? acpi_ds_init_one_object+0x0/0x88 [<ffffffff808ba5c4>] ? kernel_init+0x0/0x2fe [<ffffffff8020cd7e>] ? child_rip+0x0/0x12 Code: 00 83 e2 10 48 89 45 a0 89 55 94 74 16 be 05 06 00 00 48 c7 c7 75 33 5c 80 e8 cf db fb ff e8 3e f3 29 00 49 8d 4d 08 48 89 4d a8 <49> 83 7d 08 00 0f 84 39 03 00 00 44 89 e0 b9 44 00 00 00 4c 89 RIP [<ffffffff8026ceec>] __alloc_pages+0x4f/0x403 RSP <ffff81003fa2fbc0> CR2: 0000000000007358 ---[ end trace 4eaa2a86a8e2da22 ]--- Kernel panic - not syncing: Attempted to kill init!
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
In reply to Mel GormanQuoted 28 lines · Mel Gorman
On (19/02/08 08:12), Mike Travis didst pronounce:
Quoted 26 lines
Quoted 13 lines · Mike Travis
Quoted 10 lines · Mel Gorman
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "
__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).Quoted 7 lines
This should completely undo the change to 16 bit apic ids until we can figure out the problem with the memory-less nodes. I checked it on both the numa and non-numa
x86_64box.Thanks,
MikeHi Mel,
Did you get a chance to try out this patch to see if it cleared up the problem booting on your
x86_64numa box?
did it fail with x86.git#testing?
YH
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
Quoted 25 lines · Yinghai Lu
Quoted 24 lines · Mel Gorman
On (19/02/08 08:12), Mike Travis didst pronounce:
Quoted 22 lines
Quoted 20 lines · Mike Travis
Quoted 10 lines · Mel Gorman
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "
__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).This should completely undo the change to 16 bit apic ids until we can figure out the problem with the memory-less nodes. I checked it on both the numa and non-numa
x86_64box.Thanks,
Mike
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Hi Mel,
Did you get a chance to try out this patch to see if it cleared up the problem booting on your
x86_64numa box?did it fail with x86.git#testing?
YH
Hi,
My problem is that I haven't been able to set up a NUMA box where some of the nodes have no memory. The one box we have, the serial port doesn't work and it's in a lab far, far away. Everything else, it works fine.
Mike
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
Quoted 34 lines · Mike Travis
Quoted 32 lines · Yinghai Lu
Quoted 28 lines · Mel Gorman
On (19/02/08 08:12), Mike Travis didst pronounce:
Quoted 26 lines
Quoted 13 lines · Mike Travis
Quoted 10 lines · Mel Gorman
If you send me patches to apply on top of 2.6.25-rc1, I'll give them a spin on the machine in question. Reverting didn't work out very well as there are too many collisions with patches that were applied later. I eventually got the machine booting but it only succeeds because it only brings up one core on each processor. The patch, which is pretty brain damaged is below in case it helps you guess what the real problem is. dmesg logs are attached of the vanilla failure with acpi=debug and the log with the patch applied showing "
__cpu_up: bad cpu 1" and "__cpu_up: bad cpu3" (i.e. the second cores of each machine).Quoted 7 lines
This should completely undo the change to 16 bit apic ids until we can figure out the problem with the memory-less nodes. I checked it on both the numa and non-numa
x86_64box.Thanks,
MikeHi Mel,
Did you get a chance to try out this patch to see if it cleared up the problem booting on your
x86_64numa box?did it fail with x86.git#testing?
Quoted 7 lines
Quoted 1 line
YH
Hi,
My problem is that I haven't been able to set up a NUMA box where some of the nodes have no memory. The one box we have, the serial port doesn't work and it's in a lab far, far away. Everything else, it works fine.
x86.git#testing should be solid with numa and nodes without memory.
YH
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
In reply to Yinghai LuOn (26/02/08 22:29), Yinghai Lu didst pronounce:
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
Did you get a chance to try out this patch to see if it cleared up the problem booting on your
x86_64numa box?did it fail with x86.git#testing?
No, it boots successfully with that git branch. Somewhere in there is a fix.
Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
Quoted 11 lines · Mel Gorman
On (26/02/08 22:29), Yinghai Lu didst pronounce:
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
Did you get a chance to try out this patch to see if it cleared up the problem booting on your
x86_64numa box?did it fail with x86.git#testing?
No, it boots successfully with that git branch. Somewhere in there is a fix.
can you verify which one fix that ?
http://git.kernel.org/?p=linux/kernel/git/x86/linux-2.6-x86.git;a=commitdiff;h=a8de04ce4e4cf0af94aeb3829be8c9f813b2f5de
http://git.kernel.org/?p=linux/kernel/git/x86/linux-2.6-x86.git;a=commitdiff;h=96916d56dc6b500e39fd1855c3a6ce170b0fe28b
http://git.kernel.org/?p=linux/kernel/git/x86/linux-2.6-x86.git;a=commit;h=fa3dc9e2ad8a2aeb95a6ed3e6574cc09ab1c3115
YH
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
On (28/02/08 09:45), Yinghai Lu didst pronounce:
Quoted 10 lines · Mel Gorman
Quoted 9 lines
On (26/02/08 22:29), Yinghai Lu didst pronounce:
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
Did you get a chance to try out this patch to see if it cleared up the problem booting on your
x86_64numa box?did it fail with x86.git#testing?
Quoted 6 lines
Quoted 2 lines
No, it boots successfully with that git branch. Somewhere in there is a fix.
can you verify which one fix that ?
This one was the fix.
commit a8de04ce4e4cf0af94aeb3829be8c9f813b2f5de
Author: Yinghai Lu <[email protected]> Date: Tue Feb 19 15:35:54 2008 -0800
x86_64: not set node to cpu_to_node if the node is not online
numa_init_array will set round-bin to all cpu to online nodes. init_cpu_to_node will use cpu->apic (from MADT or mptable) and apic->node(from SRAT or AMD config space with k8_bus_64.c) to have cpu->node mapping. and later identify_cpu will overwrite them again...(with nearby_node...)
this patch will check if the node is online, otherwise will not update cpu_node map. so keep cpu_node map to online node before identify_cpu..., to prevent possible error.
arch/x86/mm/numa_64.c +6 -2
@@ -620,13 +620,17 @@ void __init init_cpu_to_node(void)int i;for (i =0 ; i <NR_CPUS ; i++) { +int node;u16 apicid = x86_cpu_to_apicid_init[i];if (apicid ==BAD_APICID )continue ; -if (apicid_to_node[apicid] ==NUMA_NO_NODE ) + node = apicid_to_node[apicid]; +if (node ==NUMA_NO_NODE )continue ; -numa_set_node (i, apicid_to_node[apicid]); +if (!node_online (node)) +continue ; +numa_set_node (i, node); } }
Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
Quoted 11 lines · Mel Gorman
Quoted 3 lines
can you verify which one fix that ?
This one was the fix.
commit
a8de04ce4e4cf0af94aeb3829be8c9f813b2f5deAuthor: Yinghai Lu <[email protected]> Date: Tue Feb 19 15:35:54 2008 -0800
x86_64: not set node tocpu_to_nodeif the node is not online
thanks - so should we accelerate this into v2.6.25?
Ingo
Re: 2.6.24 git2/mm1: cpu_to_node mapping to non-existant nodes causing boot failure
On (03/03/08 18:45), Ingo Molnar didst pronounce:
Quoted 9 lines · Mel Gorman
Quoted 7 lines
Quoted 4 lines
can you verify which one fix that ?
This one was the fix.
Quoted 8 lines
Quoted 5 lines
commit
a8de04ce4e4cf0af94aeb3829be8c9f813b2f5deAuthor: Yinghai Lu <[email protected]> Date: Tue Feb 19 15:35:54 2008 -0800
x86_64: not set node tocpu_to_nodeif the node is not onlinethanks - so should we accelerate this into v2.6.25?
I believe it needs to be merged for v2.6.25. According to test.kernel.org, bl6-13 is failing boot tests in mainline so it's either this or a lot of reverting.
Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab