partition sysfs OOPS in current GIT
I get the following OOPS from udevd during bootup on sparc64:
[ 0.982046] \|/ ____ \|/ [ 0.982054] "@'/ .. \`@" [ 0.982058] /_| \__/ |_\ [ 0.982063] \__U_/ [ 0.982482] udevd(1305): Kernel illegal instruction [#1] [ 0.982550] TSTATE: 0000004411001602 TPC: 00000000007ddb80 TNPC: 00000000007ddb84 Y: 00000000 Not tainted [ 0.982647] TPC: <0x7ddb88> [ 0.982684] g0: 0000000000000000 g1: 00000000007ddb80 g2: 0000000000000000 g3: 0000000000000000 [ 0.982760] g4: fffff803fb332a00 g5: fffff8000f8a6000 g6: fffff803fb3a8000 g7: fffff803fc893724 [ 0.982831] o0: fffff803fc8bc010 o1: 00000000007ddb58 o2: fffff803fbba0000 o3: fffff803fb3abd48 [ 0.982907] o4: 0000000000040001 o5: 0000000000000000 sp: fffff803fb3ab391 ret_pc: 00000000005b7524 [ 0.982984] RPC: <dev_attr_show+0x24/0x30> [ 0.983016] l0: 0000000000000000 l1: 0000000000000000 l2: fffff803fc9a5308 l3: 000000000005a000 [ 0.983074] l4: 0000000000000004 l5: fffff803fb340b00 l6: 0000000000000168 l7: fffff803fbd32700 [ 0.983133] i0: fffffffffffffffb i1: 00000000007ddb58 i2: fffff803fbba0000 i3: 0000000000000000 [ 0.983197] i4: 00000000005002a4 i5: 0000000000000008 i6: fffff803fb3ab451 i7: 0000000000500620 [ 0.983269] I7: <sysfs_read_file+0x80/0x104> [ 0.983299] Caller[0000000000500620]: sysfs_read_file+0x80/0x104 [ 0.983368] Caller[00000000004bedc0]: vfs_read+0x78/0x10c [ 0.983556] Caller[00000000004bf114]: sys_read+0x34/0x60 [ 0.983622] Caller[0000000000406294]: linux_sparc_syscall32+0x3c/0x40 [ 0.983707] Caller[0000000000016d90]: 0x16d98 [ 0.983873] Instruction DUMP: 007ddb80 00000000 00000000 <00000000> 00000000 00000000 00000000 00000000 007ddb98
This is dev_attr_show() calling attr->show() which points to 'part_attr_group' struct instead of a function. :-)
I'm pretty sure the following changeset is to blame:
commit edfaa7c36574f1bf09c65ad602412db9da5f96bf
Author: Kay Sievers <[email protected]> Date: Mon May 21 22:08:01 2007 +0200
Driver core: convert block from raw kobjects to core devices
This moves the block devices to /sys/class/block. It will create a
flat list of all block devices, with the disks and partitions in one
directory. For compatibility /sys/block is created and contains symlinks
to the disks.
/sys/class/block
|-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
|-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
|-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10
|-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
|-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
|-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
|-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8
|-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9
`-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
/sys/block/
|-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
`-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
Signed-off-by: Kay Sievers <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>Quoted 28 lines · David Miller
I get the following OOPS from udevd during bootup on sparc64:
[ 0.982046] \|/ ____ \|/ [ 0.982054] "@'/ .. \`@" [ 0.982058] /_| \__/ |_\ [ 0.982063] \__U_/ [ 0.982482] udevd(1305): Kernel illegal instruction [#1] [ 0.982550] TSTATE: 0000004411001602 TPC: 00000000007ddb80 TNPC: 00000000007ddb84 Y: 00000000 Not tainted [ 0.982647] TPC: <0x7ddb88> [ 0.982684] g0: 0000000000000000 g1: 00000000007ddb80 g2: 0000000000000000 g3: 0000000000000000 [ 0.982760] g4: fffff803fb332a00 g5: fffff8000f8a6000 g6: fffff803fb3a8000 g7: fffff803fc893724 [ 0.982831] o0: fffff803fc8bc010 o1: 00000000007ddb58 o2: fffff803fbba0000 o3: fffff803fb3abd48 [ 0.982907] o4: 0000000000040001 o5: 0000000000000000 sp: fffff803fb3ab391 ret_pc: 00000000005b7524 [ 0.982984] RPC: <dev_attr_show+0x24/0x30> [ 0.983016] l0: 0000000000000000 l1: 0000000000000000 l2: fffff803fc9a5308 l3: 000000000005a000 [ 0.983074] l4: 0000000000000004 l5: fffff803fb340b00 l6: 0000000000000168 l7: fffff803fbd32700 [ 0.983133] i0: fffffffffffffffb i1: 00000000007ddb58 i2: fffff803fbba0000 i3: 0000000000000000 [ 0.983197] i4: 00000000005002a4 i5: 0000000000000008 i6: fffff803fb3ab451 i7: 0000000000500620 [ 0.983269] I7: <sysfs_read_file+0x80/0x104> [ 0.983299] Caller[0000000000500620]: sysfs_read_file+0x80/0x104 [ 0.983368] Caller[00000000004bedc0]: vfs_read+0x78/0x10c [ 0.983556] Caller[00000000004bf114]: sys_read+0x34/0x60 [ 0.983622] Caller[0000000000406294]: linux_sparc_syscall32+0x3c/0x40 [ 0.983707] Caller[0000000000016d90]: 0x16d98 [ 0.983873] Instruction DUMP: 007ddb80 00000000 00000000 <00000000> 00000000 00000000 00000000 00000000 007ddb98
Quoted 2 lines
This is
dev_attr_show()callingattr->show()which points to 'part_attr_group' struct instead of a function. :-)
Ick, that's not good :)
How is it working for anyone else then? sparc64 isn't doing anything "odd" with it's block devices, is it?
Quoted 6 lines
I'm pretty sure the following changeset is to blame:
commit
edfaa7c36574f1bf09c65ad602412db9da5f96bfAuthor: Kay Sievers <[email protected]> Date: Mon May 21 22:08:01 2007 +0200
Quoted 6 lines
Driver core: convert block from raw kobjects to core devices
This moves the block devices to
/sys/class/block. It will create a flat list of all block devices, with the disks and partitions in one directory. For compatibility/sys/blockis created and contains symlinks to the disks.
So I'm guessing if you revert this it works?
Do you have CONFIG_SYSFS_DEPRECATED=Y or N?
thanks,
greg k-h
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 15:31:17 -0800
Quoted 7 lines · David Miller
Quoted 6 lines
I'm pretty sure the following changeset is to blame:
commit
edfaa7c36574f1bf09c65ad602412db9da5f96bfAuthor: Kay Sievers <[email protected]> Date: Mon May 21 22:08:01 2007 +0200
Quoted 8 lines
Quoted 6 lines
Driver core: convert block from raw kobjects to core devices
This moves the block devices to
/sys/class/block. It will create a flat list of all block devices, with the disks and partitions in one directory. For compatibility/sys/blockis created and contains symlinks to the disks.So I'm guessing if you revert this it works?
Unfortunately that's not so simple to test because afterwards there are changesets where all the files under block/ got renamed and as such I can't just revert that single patch from the tip.
Quoted 1 line
Do you have
CONFIG_SYSFS_DEPRECATED=Yor N?
I have SYSFS_DEPRECATED=y
From: David Miller <[email protected]>
Date: Wed, 06 Feb 2008 15:37:14 -0800 (PST)
Quoted 6 lines
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 15:31:17 -0800Quoted 1 line
Do you have
CONFIG_SYSFS_DEPRECATED=Yor N?I have SYSFS_DEPRECATED=y
I tested with SYSFS_DEPRECATED disabled, it made no difference.
Quoted 17 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 15:31:17 -0800Quoted 14 lines · David Miller
Quoted 12 lines
I'm pretty sure the following changeset is to blame:
commit
edfaa7c36574f1bf09c65ad602412db9da5f96bfAuthor: Kay Sievers <[email protected]> Date: Mon May 21 22:08:01 2007 +0200Driver core: convert block from raw kobjects to core devices
This moves the block devices to
/sys/class/block. It will create a flat list of all block devices, with the disks and partitions in one directory. For compatibility/sys/blockis created and contains symlinks to the disks.
Quoted 5 lines
Quoted 1 line
So I'm guessing if you revert this it works?
Unfortunately that's not so simple to test because afterwards there are changesets where all the files under
block/got renamed and as such I can't just revert that single patch from the tip.
Understood :(
but since you've bisected it down to this, that's a pretty big suggestion that this is the problem.
What block drivers are you using for sparc? Scsi? Or something else? What could make sparc64 different from x86 in regards to block device structure, odd...
thanks,
greg k-h
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 15:59:02 -0800
Quoted 3 lines
What block drivers are you using for sparc? Scsi? Or something else? What could make sparc64 different from x86 in regards to block device structure, odd...
Only Fusion SAS on this system, therefore scsi.
Quoted 8 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 15:59:02 -0800Quoted 3 lines
What block drivers are you using for sparc? Scsi? Or something else? What could make sparc64 different from x86 in regards to block device structure, odd...
Only Fusion SAS on this system, therefore scsi.
Can you send me the output of 'tree /sys/block/' on 2.6.24?
Are there a lot of partitions here? Anything different you can think of from x86 that I can have a chance to try to narrow things down with? :)
I don't know if you can boot without udev, but if you could, can you send the 'tree' output of the offending kernel too?
thanks,
greg k-h
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 16:09:59 -0800
Quoted 8 lines · David Miller
Quoted 7 lines
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 15:59:02 -0800Quoted 3 lines
What block drivers are you using for sparc? Scsi? Or something else? What could make sparc64 different from x86 in regards to block device structure, odd...
Quoted 6 lines
Quoted 1 line
Only Fusion SAS on this system, therefore scsi.
Can you send me the output of 'tree
/sys/block/' on 2.6.24?Are there a lot of partitions here? Anything different you can think of from x86 that I can have a chance to try to narrow things down with? :)
It's a pretty simple partitioning scheme.
[ 0.307823] sda: sda1 sda2 sda3 sda4
Quoted 2 lines
I don't know if you can boot without udev, but if you could, can you send the 'tree' output of the offending kernel too?
It actually is able to continue booting after udevd gets killed off by the OOPS.
I'm going to run a bisect again and get some other info for you...
Here is the tree output with current GIT:
/sys/block/
|-- loop0 -> ../devices/virtual/block/loop0 |-- loop1 -> ../devices/virtual/block/loop1 |-- loop2 -> ../devices/virtual/block/loop2 |-- loop3 -> ../devices/virtual/block/loop3 |-- loop4 -> ../devices/virtual/block/loop4 |-- loop5 -> ../devices/virtual/block/loop5 |-- loop6 -> ../devices/virtual/block/loop6 |-- loop7 -> ../devices/virtual/block/loop7 |-- ram0 -> ../devices/virtual/block/ram0 |-- ram1 -> ../devices/virtual/block/ram1 |-- ram10 -> ../devices/virtual/block/ram10 |-- ram11 -> ../devices/virtual/block/ram11 |-- ram12 -> ../devices/virtual/block/ram12 |-- ram13 -> ../devices/virtual/block/ram13 |-- ram14 -> ../devices/virtual/block/ram14 |-- ram15 -> ../devices/virtual/block/ram15 |-- ram2 -> ../devices/virtual/block/ram2 |-- ram3 -> ../devices/virtual/block/ram3 |-- ram4 -> ../devices/virtual/block/ram4 |-- ram5 -> ../devices/virtual/block/ram5 |-- ram6 -> ../devices/virtual/block/ram6 |-- ram7 -> ../devices/virtual/block/ram7 |-- ram8 -> ../devices/virtual/block/ram8 |-- ram9 -> ../devices/virtual/block/ram9 |-- sda -> ../devices/pci0000:02/0000:02:00.0/0000:03:02.0/0000:0a:00.0/host0/port-0:0/end_device-0:0/target0:0:0/0:0:0:0/block/sda
`-- sr0 -> ../devices/pci0000:02/0000:02:00.0/0000:03:01.0/0000:04:00.0/0000:05:01.0/0000:06:00.0/0000:07:00.2/usb3/3-2/3-2:1.0/host1/target1:0:0/1:0:0:0/block/sr0
26 directories, 0 files
Greg, I'm pretty sure I know what's happening.
For whatever reason we're invoking dev_attr_show() on attribute_group objects.
The reason it probably only crashes on sparc64 is because perhaps at that dev_attr->show offset on x86 there are zero bytes there instead of a pointer, so the NULL check here in dev_attr_show() masks the bug.
The problem with all of this "container_of() this", "container_of() that" is that we lose real type checking. So unless we add magic cookies to verify or other hacks, functions never really know if the container they are being passed really is a subset object of the type they expect.
Can you read the code instead of asking more information from me to try and figure out why the attribute showing paths might be misconfigured for these block device objects after the changeset in question? I can do this, but you're more likely to find the problem quickly than I am.
I redid the bisect to make sure it absolutely was that specific changeset, and it is.
Thanks.
Quoted 5 lines · David Miller
Greg, I'm pretty sure I know what's happening.
For whatever reason we're invoking
dev_attr_show()onattribute_groupobjects.
Ugh, that makes sense.
Quoted 9 lines
The reason it probably only crashes on sparc64 is because perhaps at that
dev_attr->showoffset on x86 there are zero bytes there instead of a pointer, so the NULL check here indev_attr_show()masks the bug.The problem with all of this "
container_of()this", "container_of()that" is that we lose real type checking. So unless we add magic cookies to verify or other hacks, functions never really know if the container they are being passed really is a subset object of the type they expect.
We are supposed to be careful about this, but bad things are known to happen :)
Quoted 5 lines
Can you read the code instead of asking more information from me to try and figure out why the attribute showing paths might be misconfigured for these block device objects after the changeset in question? I can do this, but you're more likely to find the problem quickly than I am.
Yes, I'll look into it tonight if I get this -stable push out in time, or if not, first thing in the morning.
Quoted 2 lines
I redid the bisect to make sure it absolutely was that specific changeset, and it is.
Thanks for doing that, I'll let you know when I have a patch to test.
greg k-h
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 21:47:38 -0800
Quoted 5 lines · David Miller
Quoted 2 lines
I redid the bisect to make sure it absolutely was that specific changeset, and it is.
Thanks for doing that, I'll let you know when I have a patch to test.
I found the problem, it's the "whole_disk" partition attribute.
Look in fs/partitions/check.c:add_partition() where it tests the ADDPART_FLAG_WHOLEDISK flag.
I think that code block needs to be updated to match the rest of the changes in the offending changeset we are discussing.
Quoted 9 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 21:47:38 -0800Quoted 5 lines · David Miller
Quoted 2 lines
I redid the bisect to make sure it absolutely was that specific changeset, and it is.
Thanks for doing that, I'll let you know when I have a patch to test.
Quoted 7 lines
I found the problem, it's the "
whole_disk" partition attribute.Look in fs/partitions/check.c:add_partition() where it tests the
ADDPART_FLAG_WHOLEDISKflag.I think that code block needs to be updated to match the rest of the changes in the offending changeset we are discussing.
Ah, great catch. That code just looks wrong.
I'm guessing that you have a partition that is the whole disk? That would make sense why I and most others haven't seen this yet.
I'll make up a patch...
thanks a lot for still digging into this,
greg k-h
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 22:38:03 -0800
Quoted 2 lines
I'm guessing that you have a partition that is the whole disk? That would make sense why I and most others haven't seen this yet.
It's an attribute used by Sun disk labels, usually it's the third partition.
Quoted 10 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 21:47:38 -0800Quoted 5 lines · David Miller
Quoted 2 lines
I redid the bisect to make sure it absolutely was that specific changeset, and it is.
Thanks for doing that, I'll let you know when I have a patch to test.
I found the problem, it's the "
whole_disk" partition attribute.
I don't understand that code at all, on 2.6.24, what does reading that file give you? At first glance, I don't see how that file would spit out anything and not give you the same kind of oops.
you are in a maze of kobject pointers, all alike...
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 22:42:10 -0800
Quoted 8 lines · David Miller
Quoted 1 line
I found the problem, it's the "
whole_disk" partition attribute.I don't understand that code at all, on 2.6.24, what does reading that file give you? At first glance, I don't see how that file would spit out anything and not give you the same kind of oops.
you are in a maze of kobject pointers, all alike...
It's supposed to just exist, and be an empty zero length file. That's why it's given no ->show method pointer.
It's existence just means that the partition is a "whole disk" partition type.
Quoted 10 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 22:42:10 -0800Quoted 7 lines · David Miller
Quoted 1 line
I found the problem, it's the "
whole_disk" partition attribute.I don't understand that code at all, on 2.6.24, what does reading that file give you? At first glance, I don't see how that file would spit out anything and not give you the same kind of oops.
Quoted 7 lines
Quoted 1 line
you are in a maze of kobject pointers, all alike...
It's supposed to just exist, and be an empty zero length file. That's why it's given no ->show method pointer.
It's existence just means that the partition is a "whole disk" partition type.
Can you try this patch to see if it solves the oops, and that the file is still there and works properly?
thanks,
greg k-h
--- fs/partitions/check.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
fs/partitions/check.c +3 -5
@@ -353,11 +353,9 @@ void add_partition(struct gendisk *disk,partition_sysfs_add_subdir (p); p->dev.uevent_suppress =0 ;if (flags &ADDPART_FLAG_WHOLEDISK ) { -static struct attribute addpartattr = { - .name ="whole_disk" , - .mode =S_IRUSR |S_IRGRP |S_IROTH , - }; - err =sysfs_create_file (&p->dev.kobj, &addpartattr); + static DEVICE_ATTR(whole_disk, S_IRUSR | S_IRGRP | S_IROTH, + NULL, NULL); + err =device_create_file (&p->dev, &dev_attr_whole_disk); }/* suppress uevent if the disk supresses it */
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 23:00:44 -0800
Quoted 13 lines · David Miller
Quoted 12 lines
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 22:42:10 -0800Quoted 8 lines · David Miller
Quoted 1 line
I found the problem, it's the "
whole_disk" partition attribute.I don't understand that code at all, on 2.6.24, what does reading that file give you? At first glance, I don't see how that file would spit out anything and not give you the same kind of oops.
you are in a maze of kobject pointers, all alike...
Quoted 8 lines
Quoted 5 lines
It's supposed to just exist, and be an empty zero length file. That's why it's given no ->show method pointer.
It's existence just means that the partition is a "whole disk" partition type.
Can you try this patch to see if it solves the oops, and that the file is still there and works properly?
It doesn't crash, but the file returns -EIO instead of zero when read.
Quoted 19 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 23:00:44 -0800Quoted 16 lines · David Miller
Quoted 15 lines
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 22:42:10 -0800Quoted 8 lines · David Miller
Quoted 1 line
I found the problem, it's the "
whole_disk" partition attribute.I don't understand that code at all, on 2.6.24, what does reading that file give you? At first glance, I don't see how that file would spit out anything and not give you the same kind of oops.
you are in a maze of kobject pointers, all alike...
It's supposed to just exist, and be an empty zero length file. That's why it's given no ->show method pointer.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
It's existence just means that the partition is a "whole disk" partition type.
Can you try this patch to see if it solves the oops, and that the file is still there and works properly?
It doesn't crash, but the file returns
-EIOinstead of zero when read.
Picky, picky, picky :)
It's odd that the original one didn't also do that, but I'll fix that up properly, let me try again...
thanks,
greg k-h
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 23:20:30 -0800
Quoted 1 line
It's odd that the original one didn't also do that,
In the old code it would vector through part_sysfs_ops (look at how it works before the changeset), which returns 0 if the attribute lacked a ->show method.
Quoted 8 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 23:20:30 -0800Quoted 1 line
It's odd that the original one didn't also do that,
In the old code it would vector through
part_sysfs_ops(look at how it works before the changeset), which returns 0 if the attribute lacked a ->show method.
Ah, yeah, what a fun hack... Makes sense though. The updated patch I send you should do the same thing, just with an additional function needed.
thanks,
greg k-h
Quoted 19 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 23:00:44 -0800Quoted 16 lines · David Miller
Quoted 15 lines
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 22:42:10 -0800Quoted 8 lines · David Miller
Quoted 1 line
I found the problem, it's the "
whole_disk" partition attribute.I don't understand that code at all, on 2.6.24, what does reading that file give you? At first glance, I don't see how that file would spit out anything and not give you the same kind of oops.
you are in a maze of kobject pointers, all alike...
It's supposed to just exist, and be an empty zero length file. That's why it's given no ->show method pointer.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
It's existence just means that the partition is a "whole disk" partition type.
Can you try this patch to see if it solves the oops, and that the file is still there and works properly?
It doesn't crash, but the file returns
-EIOinstead of zero when read.
How about this attempt?
thanks for your patience,
greg "Kay owes me a beer" k-h
--- fs/partitions/check.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
fs/partitions/check.c +10 -7
@@ -319,6 +319,14 @@ void delete_partition(struct gendisk *diput_device (&p->dev); } +static ssize_t whole_disk_show (struct device *dev, +struct device_attribute *attr,char *buf) +{ +return 0 ; +} +static DEVICE_ATTR(whole_disk, S_IRUSR | S_IRGRP | S_IROTH, + whole_disk_show, NULL); +void add_partition (struct gendisk *disk,int part,sector_t start,sector_t len,int flags) {struct hd_struct *p;
@@ -352,13 +360,8 @@ void add_partition(struct gendisk *disk,device_add (&p->dev);partition_sysfs_add_subdir (p); p->dev.uevent_suppress =0 ; -if (flags &ADDPART_FLAG_WHOLEDISK ) { -static struct attribute addpartattr = { - .name ="whole_disk" , - .mode =S_IRUSR |S_IRGRP |S_IROTH , - }; - err =sysfs_create_file (&p->dev.kobj, &addpartattr); - } +if (flags &ADDPART_FLAG_WHOLEDISK ) + err =device_create_file (&p->dev, &dev_attr_whole_disk);/* suppress uevent if the disk supresses it */ if (!disk->dev.uevent_suppress)
David Miller
Acked-byFrom: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 23:18:07 -0800
Quoted 1 line
How about this attempt?
That works, thanks. Please push to Linus :-)
Quoted 8 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 23:18:07 -0800Quoted 1 line
How about this attempt?
That works, thanks. Please push to Linus :-)
Acked-by David S. Miller <[email protected]>
Great, thanks for testing, I'll send it to him tomorrow.
greg k-h
Quoted 10 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 22:42:10 -0800Quoted 7 lines · David Miller
Quoted 1 line
I found the problem, it's the "
whole_disk" partition attribute.I don't understand that code at all, on 2.6.24, what does reading that file give you? At first glance, I don't see how that file would spit out anything and not give you the same kind of oops.
Quoted 7 lines
Quoted 1 line
you are in a maze of kobject pointers, all alike...
It's supposed to just exist, and be an empty zero length file. That's why it's given no ->show method pointer.
It's existence just means that the partition is a "whole disk" partition type.
Ah, ok, that's a bit wierd, thanks for explaining it, I'll go make it work...
thanks,
greg k-h
Quoted 7 lines · David Miller
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 21:47:38 -0800Quoted 4 lines · David Miller
Quoted 2 lines
I redid the bisect to make sure it absolutely was that specific changeset, and it is.
Quoted 6 lines
Quoted 1 line
Thanks for doing that, I'll let you know when I have a patch to test.
I found the problem, it's the "
whole_disk" partition attribute.Look in fs/partitions/check.c:add_partition() where it tests the
ADDPART_FLAG_WHOLEDISKflag.
So, if you just comment out that whole "if (flags & ADDPART_FLAG_WHOLEDISK)" chunk, does the oops go away? I think that is the real solution here as I don't see what this attribute is supposed to be showing.
thanks,
greg k-h
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 22:44:07 -0800
Quoted 12 lines · David Miller
Quoted 11 lines
From: Greg KH <[email protected]>
Date: Wed, 6 Feb 2008 21:47:38 -0800Quoted 5 lines · David Miller
Quoted 2 lines
I redid the bisect to make sure it absolutely was that specific changeset, and it is.
Thanks for doing that, I'll let you know when I have a patch to test.
I found the problem, it's the "
whole_disk" partition attribute.
Quoted 7 lines
Quoted 2 lines
Look in fs/partitions/check.c:add_partition() where it tests the
ADDPART_FLAG_WHOLEDISKflag.So, if you just comment out that whole "if (flags &
ADDPART_FLAG_WHOLEDISK)" chunk, does the oops go away? I think that is the real solution here as I don't see what this attribute is supposed to be showing.
See my other reply, it's supposed to just exist and be a zero length file. udev looks for it to determine which partition is the "whole disk" partition
Quoted 29 lines · On Wed, 6 Feb 2008 15:31:17 -0800 Greg KH <[email protected]> wrote:
Quoted 28 lines · David Miller
I get the following OOPS from udevd during bootup on sparc64:
[ 0.982046] \|/ ____ \|/ [ 0.982054] "@'/ .. \`@" [ 0.982058] /_| \__/ |_\ [ 0.982063] \__U_/ [ 0.982482] udevd(1305): Kernel illegal instruction [#1] [ 0.982550] TSTATE: 0000004411001602 TPC: 00000000007ddb80 TNPC: 00000000007ddb84 Y: 00000000 Not tainted [ 0.982647] TPC: <0x7ddb88> [ 0.982684] g0: 0000000000000000 g1: 00000000007ddb80 g2: 0000000000000000 g3: 0000000000000000 [ 0.982760] g4: fffff803fb332a00 g5: fffff8000f8a6000 g6: fffff803fb3a8000 g7: fffff803fc893724 [ 0.982831] o0: fffff803fc8bc010 o1: 00000000007ddb58 o2: fffff803fbba0000 o3: fffff803fb3abd48 [ 0.982907] o4: 0000000000040001 o5: 0000000000000000 sp: fffff803fb3ab391 ret_pc: 00000000005b7524 [ 0.982984] RPC: <dev_attr_show+0x24/0x30> [ 0.983016] l0: 0000000000000000 l1: 0000000000000000 l2: fffff803fc9a5308 l3: 000000000005a000 [ 0.983074] l4: 0000000000000004 l5: fffff803fb340b00 l6: 0000000000000168 l7: fffff803fbd32700 [ 0.983133] i0: fffffffffffffffb i1: 00000000007ddb58 i2: fffff803fbba0000 i3: 0000000000000000 [ 0.983197] i4: 00000000005002a4 i5: 0000000000000008 i6: fffff803fb3ab451 i7: 0000000000500620 [ 0.983269] I7: <sysfs_read_file+0x80/0x104> [ 0.983299] Caller[0000000000500620]: sysfs_read_file+0x80/0x104 [ 0.983368] Caller[00000000004bedc0]: vfs_read+0x78/0x10c [ 0.983556] Caller[00000000004bf114]: sys_read+0x34/0x60 [ 0.983622] Caller[0000000000406294]: linux_sparc_syscall32+0x3c/0x40 [ 0.983707] Caller[0000000000016d90]: 0x16d98 [ 0.983873] Instruction DUMP: 007ddb80 00000000 00000000 <00000000> 00000000 00000000 00000000 00000000 007ddb98
Quoted 4 lines
Quoted 2 lines
This is
dev_attr_show()callingattr->show()which points to 'part_attr_group' struct instead of a function. :-)Ick, that's not good :)
gregkh-driver-block-device.patch strikes again.
Quoted 9 lines
How is it working for anyone else then? sparc64 isn't doing anything "odd" with it's block devices, is it?
Quoted 6 lines
I'm pretty sure the following changeset is to blame:
commit
edfaa7c36574f1bf09c65ad602412db9da5f96bfAuthor: Kay Sievers <[email protected]> Date: Mon May 21 22:08:01 2007 +0200
Quoted 8 lines
Quoted 6 lines
Driver core: convert block from raw kobjects to core devices
This moves the block devices to
/sys/class/block. It will create a flat list of all block devices, with the disks and partitions in one directory. For compatibility/sys/blockis created and contains symlinks to the disks.So I'm guessing if you revert this it works?
Going offtopic here...
The patch was committed to mainline last week and it has a git timestamp from eight months ago. When you received the original email from Kay.
But the patch changed in that time period. This doesn't seem right?
Quoted 16 lines · Andrew Morton
Quoted 16 lines
How is it working for anyone else then? sparc64 isn't doing anything "odd" with it's block devices, is it?
Quoted 12 lines
I'm pretty sure the following changeset is to blame:
commit
edfaa7c36574f1bf09c65ad602412db9da5f96bfAuthor: Kay Sievers <[email protected]> Date: Mon May 21 22:08:01 2007 +0200Driver core: convert block from raw kobjects to core devices
This moves the block devices to
/sys/class/block. It will create a flat list of all block devices, with the disks and partitions in one directory. For compatibility/sys/blockis created and contains symlinks to the disks.
Quoted 8 lines
Quoted 1 line
So I'm guessing if you revert this it works?
Going offtopic here...
The patch was committed to mainline last week and it has a git timestamp from eight months ago. When you received the original email from Kay.
But the patch changed in that time period. This doesn't seem right?
The patch did change over time, but not that much, minor bugfixes for it. I didn't think to update the original date in the quilt file, sorry. It was in -mm for quite a while, so I thought it got a good enough testing period.
I'll try to remember to update the timestamp on patches that get updated, it's a pretty rare thing for my patchflow, shouldn't be hard to remember.
thanks,
greg k-h
Oops figures
In reply to David MillerQuoted 10 lines · David Miller
Subject: partition sysfs OOPS in current GIT
I get the following OOPS from udevd during bootup on sparc64:
[ 0.982046] \|/ ____ \|/ [ 0.982054] "@'/ .. \`@" [ 0.982058] /_| \__/ |_\ [ 0.982063] \__U_/
Just what is this creature that one sees on sparc dumps? Looks like a smiley ball with two blinkenlights (symbolizing the sun?) on each side...
Re: Oops figures
From: Jan Engelhardt <[email protected]>
Date: Thu, 7 Feb 2008 00:42:52 +0100 (CET)
Quoted 8 lines · David Miller
Quoted 6 lines
Subject: partition sysfs OOPS in current GIT
I get the following OOPS from udevd during bootup on sparc64:
Quoted 8 lines
Quoted 4 lines
[ 0.982046] \|/ ____ \|/ [ 0.982054] "@'/ .. \`@" [ 0.982058] /_| \__/ |_\ [ 0.982063] \__U_/Just what is this creature that one sees on sparc dumps? Looks like a smiley ball with two blinkenlights (symbolizing the sun?) on each side...
It's ascii art I took it from someone's signature 12 years ago, it's meant to be the guy on the cover of some of the editions of the Hitchhikers Guide to the Galaxy by Douglas Adams.
"Don't Panic!" :-)