e1000e: Fix CRC stripping in hardware context bug
Subsystems (2)
PATCH 1/1 e1000e: Fix CRC stripping in hardware context bug
CRC stripping was only correctly enabled for packet split recieves which is used when receiving jumbo frames. Correctly enable SECRC also for normal buffer packet receives.
Tested by Andy Gospodarek and Johan Andersson, see bugzilla #9940.
---
drivers/net/e1000e/netdev.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/net/e1000e/netdev.c +3 -3
@@ -1690,6 +1690,9 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)else rctl |=E1000_RCTL_LPE ; +/* Enable hardware CRC frame stripping */ + rctl |=E1000_RCTL_SECRC ; +/* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096 ; rctl |=E1000_RCTL_BSEX ;
@@ -1755,9 +1758,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)/* Enable Packet split descriptors */ rctl |=E1000_RCTL_DTYP_PS ; - -/* Enable hardware CRC frame stripping */ - rctl |=E1000_RCTL_SECRC ; psrctl |= adapter->rx_ps_bsize0 >>E1000_PSRCTL_BSIZE0_SHIFT ;
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
Quoted 6 lines · Auke Kok
CRC stripping was only correctly enabled for packet split recieves which is used when receiving jumbo frames. Correctly enable SECRC also for normal buffer packet receives.
Tested by Andy Gospodarek and Johan Andersson, see bugzilla #9940.
This works well on my systems.
Jeff Garzik
AppliedQuoted 11 lines · Auke Kok
CRC stripping was only correctly enabled for packet split recieves which is used when receiving jumbo frames. Correctly enable SECRC also for normal buffer packet receives.
Tested by Andy Gospodarek and Johan Andersson, see bugzilla #9940.
Signed-off-by Auke Kok <[email protected]>---
drivers/net/e1000e/netdev.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
applied