Skip to contentSkip to conversation

PCI: remove initial bios sort of PCI devices on x86

RFC PATCH In review Greg KH 2 participants 3 messages Feb 13, 2008 – Feb 14, 2008

Subsystems (4)
lore
Share & tools
lore

Greg KH

author
#0 lore raw

RFC PATCH 1/1 PCI: remove initial bios sort of PCI devices on x86

We currently keep 2 lists of PCI devices in the system, one in the driver core, and one all on its own. This second list is sorted at boot time, in "BIOS" order, to try to remain compatible with older kernels (2.2 and earlier days). There was also a "nosort" option to turn this sorting off, to remain compatible with even older kernel versions, but that just ends up being what we have been doing from 2.5 days...

Unfortunately, the second list of devices is not really ever used to determine the probing order of PCI devices or drivers[1]. That is done using the driver core list instead. This change happened back in the early 2.5 days.

Relying on BIOS ording for the binding of drivers to specific device names is problematic for many reasons, and userspace tools like udev exist to properly name devices in a persistant manner if that is needed, no reliance on the BIOS is needed.

Matt Domsch and others at Dell noticed this back in 2006, and added a boot option to sort the PCI device lists (both of them) in a breadth-first manner to help remain compatible with the 2.4 order, if needed for any reason. This option is not going away, as some systems rely on them.

This patch removes the sorting of the internal PCI device list in "BIOS" mode, as it's not needed at all anymore, and hasn't for many years. I've also removed the PCI flags for this from some other arches that for some reason defined them, but never used them.

This should not change the ordering of any drivers or device probing.

[1] The old-style pci_get_device and pci_find_device() still used this sorting order, but there are very few drivers that use these functions, as they are deprecated for use in this manner. If for some reason, a driver rely on the order and uses these functions, the breadth-first boot option will resolve any problem.

---
 Documentation/kernel-parameters.txt     |    4 -
 arch/frv/mb93090-mb00/pci-frv.h         |    2 
 arch/mn10300/unit-asb2305/pci-asb2305.h |    2 
 arch/sh/drivers/pci/pci-sh4.h           |    2 
 arch/x86/pci/common.c                   |    7 ---
 arch/x86/pci/pcbios.c                   |   72 --------------------------------
 arch/x86/pci/pci.h                      |    3 -
 include/asm-sh/mpc1211/pci.h            |    2 
 8 files changed, 94 deletions(-)
Documentation/kernel-parameters.txt +0 -4
@@ -1393,10 +1393,6 @@ and is between 256 and 4096 characters. 
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
 				disable the use of MSI interrupts system-wide.
-		nosort		[X86-32] Don't sort PCI devices according to
-				order given by the PCI BIOS. This sorting is
-				done to get a device order compatible with
-				older kernels.
 		biosirq		[X86-32] Use PCI BIOS calls to get the interrupt
 				routing table. These calls are known to be buggy
 				on several machines and they hang the machine
arch/frv/mb93090-mb00/pci-frv.h +0 -2
@@ -17,8 +17,6 @@
 #define PCI_PROBE_BIOS		0x0001
 #define PCI_PROBE_CONF1		0x0002
 #define PCI_PROBE_CONF2		0x0004
-#define PCI_NO_SORT		0x0100
-#define PCI_BIOS_SORT		0x0200
 #define PCI_NO_CHECKS		0x0400
 #define PCI_ASSIGN_ROMS		0x1000
 #define PCI_BIOS_IRQ_SCAN	0x2000
arch/mn10300/unit-asb2305/pci-asb2305.h +0 -2
@@ -23,8 +23,6 @@
 #define PCI_PROBE_BIOS 1
 #define PCI_PROBE_CONF1 2
 #define PCI_PROBE_CONF2 4
-#define PCI_NO_SORT 0x100
-#define PCI_BIOS_SORT 0x200
 #define PCI_NO_CHECKS 0x400
 #define PCI_ASSIGN_ROMS 0x1000
 #define PCI_BIOS_IRQ_SCAN 0x2000
arch/sh/drivers/pci/pci-sh4.h +0 -2
@@ -15,8 +15,6 @@
 #define PCI_PROBE_BIOS		1
 #define PCI_PROBE_CONF1		2
 #define PCI_PROBE_CONF2		4
-#define PCI_NO_SORT		0x100
-#define PCI_BIOS_SORT		0x200
 #define PCI_NO_CHECKS		0x400
 #define PCI_ASSIGN_ROMS		0x1000
 #define PCI_BIOS_IRQ_SCAN	0x2000
arch/x86/pci/common.c +0 -7
@@ -427,10 +427,6 @@ static int __init pcibios_init(void)
 
 	if (pci_bf_sort >= pci_force_bf)
 		pci_sort_breadthfirst();
-#ifdef CONFIG_PCI_BIOS
-	if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
-		pcibios_sort();
-#endif
 	return 0;
 }
 
@@ -455,9 +451,6 @@ char * __devinit  pcibios_setup(char *st
 	} else if (!strcmp(str, "nobios")) {
 		pci_probe &= ~PCI_PROBE_BIOS;
 		return NULL;
-	} else if (!strcmp(str, "nosort")) {
-		pci_probe |= PCI_NO_SORT;
-		return NULL;
 	} else if (!strcmp(str, "biosirq")) {
 		pci_probe |= PCI_BIOS_IRQ_SCAN;
 		return NULL;
arch/x86/pci/pcbios.c +0 -72

90 lines not on this page · raw message

arch/x86/pci/pci.h +0 -3
@@ -19,8 +19,6 @@
 #define PCI_PROBE_MASK		0x000f
 #define PCI_PROBE_NOEARLY	0x0010
 
-#define PCI_NO_SORT		0x0100
-#define PCI_BIOS_SORT		0x0200
 #define PCI_NO_CHECKS		0x0400
 #define PCI_USE_PIRQ_MASK	0x0800
 #define PCI_ASSIGN_ROMS		0x1000
@@ -101,7 +99,6 @@ extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
 extern void pci_mmcfg_init(int type);
-extern void pcibios_sort(void);
 
 /* pci-mmconfig.c */
 
include/asm-sh/mpc1211/pci.h +0 -2
@@ -24,8 +24,6 @@
 #define PCI_PROBE_BIOS    1
 #define PCI_PROBE_CONF1   2
 #define PCI_PROBE_CONF2   4
-#define PCI_NO_SORT       0x100
-#define PCI_BIOS_SORT     0x200
 #define PCI_NO_CHECKS     0x400
 #define PCI_ASSIGN_ROMS   0x1000
 #define PCI_BIOS_IRQ_SCAN 0x2000
#1 lore raw
Quoted 23 lines · Greg KH

We currently keep 2 lists of PCI devices in the system, one in the driver core, and one all on its own. This second list is sorted at boot time, in "BIOS" order, to try to remain compatible with older kernels (2.2 and earlier days). There was also a "nosort" option to turn this sorting off, to remain compatible with even older kernel versions, but that just ends up being what we have been doing from 2.5 days...

Unfortunately, the second list of devices is not really ever used to determine the probing order of PCI devices or drivers[1]. That is done using the driver core list instead. This change happened back in the early 2.5 days.

Relying on BIOS ording for the binding of drivers to specific device names is problematic for many reasons, and userspace tools like udev exist to properly name devices in a persistant manner if that is needed, no reliance on the BIOS is needed.

Matt Domsch and others at Dell noticed this back in 2006, and added a boot option to sort the PCI device lists (both of them) in a breadth-first manner to help remain compatible with the 2.4 order, if needed for any reason. This option is not going away, as some systems rely on them.

Quoted 6 lines

This patch removes the sorting of the internal PCI device list in "BIOS" mode, as it's not needed at all anymore, and hasn't for many years. I've also removed the PCI flags for this from some other arches that for some reason defined them, but never used them.

This should not change the ordering of any drivers or device probing.

Good plan. I'll be glad when the vestigal internal PCI device list is gone too.

Thanks,
Matt

Signature · 3 lines
Matt Domsch
Linux Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux
author
#2 lore raw
Quoted 4 lines · Matt Domsch

On Wed, Feb 13, 2008 at 03:40:29PM -0800, Greg KH wrote:

Good plan. I'll be glad when the vestigal internal PCI device list is gone too.

With this patch, it's the last major step, I have a series of follow-up patches that will remove it entirely. I'll post them when they've been tested better.

thanks,

greg k-h