PL2303 Driver missing support for USB to Serial Cable
I recently purchased a USB->Com Port serial cable from Radio Shack (Model number 26-183) which did no seem to want to work. After looking into it I discovered that it is based on the Prolific chipset using the PL2303 driver.
I then checked the Vendor and Product ID against the list in the drive and sure enough, the IDs were missing in the driver.
So here are my modifications to the PL2303 driver which have been working flawlessly on my system the whole week:
drivers/usb/serial/pl2303.h
--------
/* Radio Shack 26-183 */
#define RADIOSHACK26183_VENDOR_ID 0x05ad
#define RADIOSHACK26183_PRODUCT_ID 0x0fba
drivers/usb/serial/pl2303.c
--------
Added to struct usb_device_id id_table
{ USB_DEVICE(RADIOSHACK26183_VENDOR_ID RADIOSHACK26183_PRODUCT_ID) }
I still have to manually modprobe the module as the kernel won't automatically load it when I connect the device, no idea what I would need to change where for that to happen.
The above though does successfully add support for that serial cable so I thought I'd share it with the kernel list so that it can possibly be added to the kernel and I can stop having to re-compile the driver every kernel update. :)
Please feel free to contact me if needed.
Thanks!
Stephan
Quoted 25 lines · Stephan Rose
I recently purchased a
USB->ComPort serial cable from Radio Shack (Model number 26-183) which did no seem to want to work. After looking into it I discovered that it is based on the Prolific chipset using the PL2303 driver.I then checked the Vendor and Product ID against the list in the drive and sure enough, the IDs were missing in the driver.
So here are my modifications to the PL2303 driver which have been working flawlessly on my system the whole week:
drivers/usb/serial/pl2303.h
--------/* Radio Shack 26-183 */
#defineRADIOSHACK26183_VENDOR_ID0x05ad
#defineRADIOSHACK26183_PRODUCT_ID0x0fba
drivers/usb/serial/pl2303.c
--------Added to struct
usb_device_idid_table{
USB_DEVICE(RADIOSHACK26183_VENDOR_ID RADIOSHACK26183_PRODUCT_ID)}
Quoted 8 lines
I still have to manually modprobe the module as the kernel won't automatically load it when I connect the device, no idea what I would need to change where for that to happen.
The above though does successfully add support for that serial cable so I thought I'd share it with the kernel list so that it can possibly be added to the kernel and I can stop having to re-compile the driver every kernel update. :)
Well, would you mind creating, testing and posting a patch?
Stephan,
Quoted 7 lines · Jiri Slaby
Quoted 4 lines · Stephan Rose
I recently purchased a
USB->ComPort serial cable from Radio Shack (Model number 26-183) which did no seem to want to work. After looking into it I discovered that it is based on the Prolific chipset using the PL2303 driver.Well, would you mind creating, testing and posting a patch?
You needn't bother. As far as I'm concerned, what you sent is sufficient and, as I am currently working on the pl2303 driver, you can rest assured that it will be included in the patch that I send.
Regards,
David
Quoted 9 lines · David Newall
Stephan,
Quoted 6 lines · Jiri Slaby
Quoted 4 lines · Stephan Rose
I recently purchased a
USB->ComPort serial cable from Radio Shack (Model number 26-183) which did no seem to want to work. After looking into it I discovered that it is based on the Prolific chipset using the PL2303 driver.
Quoted 6 lines
Quoted 1 line
Well, would you mind creating, testing and posting a patch?
You needn't bother. As far as I'm concerned, what you sent is sufficient and, as I am currently working on the pl2303 driver, you can rest assured that it will be included in the patch that I send.
That might be pretty tough to do, as it's already in the 2.6.25-rc2 release :)
And please, patches need to be one-thing-per-patch. Don't try to mix cleanups, bug fixes, and also new devices ids all in one patch.
Stephan, thanks for the report, but someone beat you to it by a few weeks already, the driver is updated.
thanks,
greg k-h
Quoted 17 lines · Greg KH
Quoted 9 lines · David Newall
Stephan,
Quoted 6 lines · Jiri Slaby
Quoted 4 lines · Stephan Rose
I recently purchased a
USB->ComPort serial cable from Radio Shack (Model number 26-183) which did no seem to want to work. After looking into it I discovered that it is based on the Prolific chipset using the PL2303 driver.Quoted 6 lines
Quoted 1 line
Well, would you mind creating, testing and posting a patch?
You needn't bother. As far as I'm concerned, what you sent is sufficient and, as I am currently working on the pl2303 driver, you can rest assured that it will be included in the patch that I send.
Quoted 8 lines
That might be pretty tough to do, as it's already in the 2.6.25-rc2 release :)
And please, patches need to be one-thing-per-patch. Don't try to mix cleanups, bug fixes, and also new devices ids all in one patch.
Stephan, thanks for the report, but someone beat you to it by a few weeks already, the driver is updated.
No problem, glad it's already in! :)
Thanks,
Stephan