Skip to contentSkip to conversation

x86: define outb_pic and inb_pic to stop using outb_p and inb_p

PATCH In review David P. Reed 2 participants 2 messages Feb 18, 2008 – Feb 19, 2008

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 x86: define outb_pic and inb_pic to stop using outb_p and inb_p

x86: define outb_pic and inb_pic to stop using outb_p and inb_p

The delay between io port accesses to the PIC is now defined using outb_pic and inb_pic. This fix provides the next step, using udelay(2) to define the *PIC specific* timing requirements, rather than on bus-oriented timing, which is not well calibrated.

Again, the primary reason for fixing this is to use proper delay strategy, and in particular to fix crashes that can result from using port 80 writes on machines that have resources on port 80, such as the ENE chips used by Quanta in latops it designs and sells to, e.g. HP.

include/asm-x86/i8259.h +18 -2
Index: linux-2.6/include/asm-x86/i8259.h
===================================================================
@@ -29,7 +29,23 @@ extern void enable_8259A_irq(unsigned in
 extern void disable_8259A_irq(unsigned int irq);
 extern unsigned int startup_8259A_irq(unsigned int irq);
 
-#define inb_pic		inb_p
-#define outb_pic	outb_p
+/* the PIC may need a careful delay on some platforms, hence specific calls */
+static inline unsigned char inb_pic(unsigned int port)
+{
+	/* delay for some accesses to PIC on motherboard or in chipset must be
+	   at least one microsecond, but be safe here. */
+	unsigned char value = inb(port);
+	udelay(2);
+	return value;
+}
+
+static inline void outb_pic(unsigned char value, unsigned int port)
+{
+	/* delay for some accesses to PIC on motherboard or in chipset must be
+	   at least one microsecond, but be safe here. */
+	outb(value, port);
+	udelay(2);
+}
+
 
 #endif	/* __ASM_I8259_H__ */
#1 lore raw
Quoted 6 lines · David P. Reed

x86: define outb_pic and inb_pic to stop using outb_p and inb_p

The delay between io port accesses to the PIC is now defined using outb_pic and inb_pic. This fix provides the next step, using udelay(2) to define the *PIC specific* timing requirements, rather than on bus-oriented timing, which is not well calibrated.

thanks David, applied.

minor nit:

Review

Quoted 2 lines
(quoted diff) +2 -0
+	/* delay for some accesses to PIC on motherboard or in chipset must be
+	   at least one microsecond, but be safe here. */

i changed this to the standard multi-line comment style of:

Review

Quoted 4 lines
(quoted diff) +4 -0
+	/*
+      * Delay for some accesses to PIC on motherboard or in chipset 
+      * must be at least one microsecond, but be safe here:
+      */

Ingo