LILO fatal error after going from 2.6.22 to 2.6.24.2
Hello,
I have just upgraded from 2.6.22 to 2.6.24.2 and after booting into the new kernel and seeing that everything went right, I wanted to make the new kernel the default boot kernel. But running LILO I got
Fatal: Linux experimental device 0x04x needs to be defined. Check 'man lilo.conf' under 'disk=' and 'max-partitions='
(Full output from lilo -v 5 below). Apart from setting 2.6.24.2 as default this is the same lilo config as 2.6.22 was able to write fine. Can anyone tell me what I (or the kernel) am/is doing wrong?
Thanks,
Rasmus
LILO version 22.7.3, Copyright (C) 1992-1998 Werner Almesberger Development beyond version 21 Copyright (C) 1999-2006 John Coffman Released 11-Aug-2006 and compiled at 17:06:40 on Jan 17 2007
raid_setup: dev=000C rdev=0340raid_setup returns offset = 00000000 ndisk = 0
BIOS VolumeID Device
Reading boot sector from /dev/hdb
geo_get: device 0340, all=1 pf_hard_disk_scan: (7,0) /dev/loop0 pf_hard_disk_scan: (3,64) /dev/hdb pf_hard_disk_scan: (3,65) /dev/hdb1 lookup_dev: number=0340 lookup_dev: number=0340 pf: dev=0340 id=B661B661 name=/dev/hdb geo_query_dev: device=0340 lookup_dev: number=0340 exit geo_query_dev bios_dev: device 0340 lookup_dev: number=0340 bios_dev: masked device 0340, which is /dev/hdb bios_dev: geometry check found 0 matches bios_dev: (0x82) vol-ID=17FF01F9 *PT=08070AD0 bios_dev: (0x81) vol-ID=7C4DC2CA *PT=08070A88 bios_dev: (0x80) vol-ID=B661B661 *PT=08070A40 bios_dev: PT match found 1 match (0x80) pf_hard_disk_scan: (3,66) /dev/hdb2 pf_hard_disk_scan: (8,0) /dev/sda pf_hard_disk_scan: (8,1) /dev/sda1 lookup_dev: number=0800 lookup_dev: number=0800 pf: dev=0800 id=7C4DC2CA name=/dev/sda geo_query_dev: device=0800 lookup_dev: number=0800 lookup_dev: number=0300 exit geo_query_dev bios_dev: device 0800 lookup_dev: number=0800 bios_dev: masked device 0800, which is /dev/sda bios_dev: geometry check found 0 matches bios_dev: (0x82) vol-ID=17FF01F9 *PT=08070AD0 bios_dev: (0x81) vol-ID=7C4DC2CA *PT=08070A88 bios_dev: (0x80) vol-ID=B661B661 *PT=08070A40 bios_dev: PT match found 1 match (0x81) pf_hard_disk_scan: (8,16) /dev/sdb pf_hard_disk_scan: (8,17) /dev/sdb1 lookup_dev: number=0810 lookup_dev: number=0810 pf: dev=0810 id=17FF01F9 name=/dev/sdb geo_query_dev: device=0810 lookup_dev: number=0810 lookup_dev: number=0300 exit geo_query_dev bios_dev: device 0810 lookup_dev: number=0810 bios_dev: masked device 0810, which is /dev/sdb bios_dev: geometry check found 0 matches bios_dev: (0x82) vol-ID=17FF01F9 *PT=08070AD0 bios_dev: (0x81) vol-ID=7C4DC2CA *PT=08070A88 bios_dev: (0x80) vol-ID=B661B661 *PT=08070A40 bios_dev: PT match found 1 match (0x81) pf_hard_disk_scan: (9,0) /dev/md0 pf_hard_disk_scan: (253,0) /dev/dm-0
Caching device /dev/dm-0 (0xFD00)pf_hard_disk_scan: (253,1) /dev/dm-1
Caching device /dev/dm-1 (0xFD01)pf_hard_disk_scan: (253,2) /dev/dm-2
Caching device /dev/dm-2 (0xFD02)pf_hard_disk_scan: (253,3) /dev/dm-3
Caching device /dev/dm-3 (0xFD03)pf_hard_disk_scan: (253,4) /dev/dm-4
Caching device /dev/dm-4 (0xFD04)pf_hard_disk_scan: (253,5) /dev/dm-5
Caching device /dev/dm-5 (0xFD05)pf_hard_disk_scan: (253,6) /dev/dm-6
Caching device /dev/dm-6 (0xFD06)
0340 B661B661 /dev/hdb 0800 7C4DC2CA /dev/sda 0810 17FF01F9 /dev/sdb pf_hard_disk_scan: ndevs=3 0340 B661B661 /dev/hdb 0800 7C4DC2CA /dev/sda 0810 17FF01F9 /dev/sdb Resolve invalid VolumeIDs Resolve duplicate VolumeIDs 0340 B661B661 /dev/hdb 0800 7C4DC2CA /dev/sda 0810 17FF01F9 /dev/sdb
device codes (user assigned pf) = 0
device codes (user assigned) = 0
device codes (BIOS assigned) = 3
Filling in '/dev/sdb' = 0x82
device codes (canonical) = 7geo_query_dev: device=0340lookup_dev: number=0340
exit geo_query_dev
bios_dev: device 0340 lookup_dev: number=0340 bios_dev: masked device 0340, which is /dev/hdb bios_dev: geometry check found 0 matches bios_dev: (0x82) vol-ID=17FF01F9 *PT=08070AD0 bios_dev: (0x81) vol-ID=7C4DC2CA *PT=08070A88 bios_dev: (0x80) vol-ID=B661B661 *PT=08070A40 bios_dev: PT match found 1 match (0x80) Device 0x0340: BIOS drive 0x80, 255 heads, 9729 cylinders,
63 sectors. Partition offset: 0 sectors.
registering bios=0x80 device=0x0340
Using Volume ID B661B661 on bios 80geo_get: device FD06, all=1geo_query_dev: device=FD06lookup_dev: number=FD06
Fatal: Linux experimental device 0x04x needs to be defined. Check 'man lilo.conf' under 'disk=' and 'max-partitions='
Quoted 6 lines · Rasmus Andersen
Hello,
I have just upgraded from 2.6.22 to 2.6.24.2 and after booting into the new kernel and seeing that everything went right, I wanted to make the new kernel the default boot kernel. But running LILO I got
Quoted 7 lines
Fatal: Linux experimental device 0x04x needs to be defined. Check 'man lilo.conf' under 'disk=' and 'max-partitions='
(Full output from lilo -v 5 below). Apart from setting 2.6.24.2 as default this is the same lilo config as 2.6.22 was able to write fine. Can anyone tell me what I (or the kernel) am/is doing wrong?
You have at least one file on a device mapper device (possibly an LVM module), and LILO doesn't understand it.
-hpa
Quoted 1 line · H. Peter Anvin
Rasmus Andersen wrote:
[...]
Quoted 2 lines
You have at least one file on a device mapper device (possibly an LVM module), and LILO doesn't understand it.
Hi Peter, and thanks for your reply. That was indeed the issue, my /boot was not mounted and my / is on a LVM partition. So this was merely a user issue, my specialty.
Thanks for your time.
Cheers,
Rasmus