add target for $(LDSCRIPT)
PATCH 1/1 add target for $(LDSCRIPT)
If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds), then change into the board directory and try and create it. This allows you to generate the linker script on the fly based upon board defines (like the Blackfin boards do).
There should be no regressions due to this change as the normal case is to already have a u-boot.lds file. If that's the case, then there's nothing to generate, and so make will always exit. The fix here is that if the linker script does not exist, the implicit rules take over and attempt to guess how to generate the file.
--- Makefile | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
Makefile +3 -0
@@ -326,6 +326,9 @@ $(LIBS): depend $(obj)include/autoconf.mk $(SUBDIRS): depend $(obj)include/autoconf.mk $(MAKE) -C $@ all +$(LDSCRIPT): depend $(obj)include/autoconf.mk + $(MAKE) -C $(dir $@) $(notdir $@) + $(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk $(MAKE) -C nand_spl/board/$(BOARDDIR) all
Signature · 1 line
1.5.4
Wolfgang Denk
AppliedPATCH 1/1 add target for $(LDSCRIPT)
Quoted 11 lines · In message <[email protected]> you wrote:
If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds), then change into the board directory and try and create it. This allows you to generate the linker script on the fly based upon board defines (like the Blackfin boards do).
There should be no regressions due to this change as the normal case is to already have a
u-boot.ldsfile. If that's the case, then there's nothing to generate, and so make will always exit. The fix here is that if the linker script does not exist, the implicit rules take over and attempt to guess how to generate the file.
Quoted 4 lines
Signed-off-by Mike Frysinger <[email protected]>--- Makefile | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Use the Force, Luke.