Skip to contentSkip to conversation

acpi_pci_set_power_state() cleanups

PATCH Applied David Brownell 2 participants 3 messages Feb 23, 2008

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 acpi_pci_set_power_state() cleanups

Minor cleanups to acpi_pci_set_power_state(): use the ACPI and PCI state symbols to make clear that a mapping is being done between PCI and ACPI states, instead of using magic numbers. For paranoia's sake, report any errors. Save five bytes (x86_64) too.

---
Extracted from the "teach ACPI how to use driver model wakeup flags" patch series ... who knows, maybe that could be merged someday.

 drivers/pci/pci-acpi.c |   24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)
drivers/pci/pci-acpi.c +16 -8
@@ -272,21 +272,29 @@ static int acpi_pci_set_power_state(stru
 {
 	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
 	acpi_handle tmp;
-	static int state_conv[] = {
-		[0] = 0,
-		[1] = 1,
-		[2] = 2,
-		[3] = 3,
-		[4] = 3
+	static const u8 state_conv[] = {
+		[PCI_D0] = ACPI_STATE_D0,
+		[PCI_D1] = ACPI_STATE_D1,
+		[PCI_D2] = ACPI_STATE_D2,
+		[PCI_D3hot] = ACPI_STATE_D3,
+		[PCI_D3cold] = ACPI_STATE_D3
 	};
-	int acpi_state = state_conv[(int __force) state];
 
 	if (!handle)
 		return -ENODEV;
 	/* If the ACPI device has _EJ0, ignore the device */
 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
 		return 0;
-	return acpi_bus_set_power(handle, acpi_state);
+
+	switch (state) {
+	case PCI_D0:
+	case PCI_D1:
+	case PCI_D2:
+	case PCI_D3hot:
+	case PCI_D3cold:
+		return acpi_bus_set_power(handle, state_conv[state]);
+	}
+	return -EINVAL;
 }
 
 
reviewer Applied
#1 lore raw

applied.

thanks,
-len

Quoted 58 lines · David Brownell

Minor cleanups to acpi_pci_set_power_state(): use the ACPI and PCI state symbols to make clear that a mapping is being done between PCI and ACPI states, instead of using magic numbers. For paranoia's sake, report any errors. Save five bytes (x86_64) too.

---
Extracted from the "teach ACPI how to use driver model wakeup flags" patch series ... who knows, maybe that could be merged someday.

 drivers/pci/pci-acpi.c |   24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)
drivers/pci/pci-acpi.c +16 -9
@@ -272,21 +272,29 @@ static int acpi_pci_set_power_state(stru
 {
 	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
 	acpi_handle tmp;
-	static int state_conv[] = {
-		[0] = 0,
-		[1] = 1,
-		[2] = 2,
-		[3] = 3,
-		[4] = 3
+	static const u8 state_conv[] = {
+		[PCI_D0] = ACPI_STATE_D0,
+		[PCI_D1] = ACPI_STATE_D1,
+		[PCI_D2] = ACPI_STATE_D2,
+		[PCI_D3hot] = ACPI_STATE_D3,
+		[PCI_D3cold] = ACPI_STATE_D3
 	};
-	int acpi_state = state_conv[(int __force) state];
 
 	if (!handle)
 		return -ENODEV;
 	/* If the ACPI device has _EJ0, ignore the device */
 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
 		return 0;
-	return acpi_bus_set_power(handle, acpi_state);
+
+	switch (state) {
+	case PCI_D0:
+	case PCI_D1:
+	case PCI_D2:
+	case PCI_D3hot:
+	case PCI_D3cold:
+		return acpi_bus_set_power(handle, state_conv[state]);
+	}
+	return -EINVAL;
 }
 
 
-

To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

reviewer Applied
#2 lore raw
In reply to David Brownell

applied.

thanks,
-len

Quoted 58 lines · David Brownell

Minor cleanups to acpi_pci_set_power_state(): use the ACPI and PCI state symbols to make clear that a mapping is being done between PCI and ACPI states, instead of using magic numbers. For paranoia's sake, report any errors. Save five bytes (x86_64) too.

---
Extracted from the "teach ACPI how to use driver model wakeup flags" patch series ... who knows, maybe that could be merged someday.

 drivers/pci/pci-acpi.c |   24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)
drivers/pci/pci-acpi.c +16 -9
@@ -272,21 +272,29 @@ static int acpi_pci_set_power_state(stru
 {
 	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
 	acpi_handle tmp;
-	static int state_conv[] = {
-		[0] = 0,
-		[1] = 1,
-		[2] = 2,
-		[3] = 3,
-		[4] = 3
+	static const u8 state_conv[] = {
+		[PCI_D0] = ACPI_STATE_D0,
+		[PCI_D1] = ACPI_STATE_D1,
+		[PCI_D2] = ACPI_STATE_D2,
+		[PCI_D3hot] = ACPI_STATE_D3,
+		[PCI_D3cold] = ACPI_STATE_D3
 	};
-	int acpi_state = state_conv[(int __force) state];
 
 	if (!handle)
 		return -ENODEV;
 	/* If the ACPI device has _EJ0, ignore the device */
 	if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
 		return 0;
-	return acpi_bus_set_power(handle, acpi_state);
+
+	switch (state) {
+	case PCI_D0:
+	case PCI_D1:
+	case PCI_D2:
+	case PCI_D3hot:
+	case PCI_D3cold:
+		return acpi_bus_set_power(handle, state_conv[state]);
+	}
+	return -EINVAL;
 }
 
 
-

To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html