Skip to contentSkip to conversation

Intel 945GM: 2.6.25-rc3 report (with a possible regression)

DISCUSSION Romano Giannetti 4 participants 9 messages Feb 26, 2008 – Mar 1, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

this mail is to give feedback about the 2.6.25-rc3 kernel, on an Ubuntu 7.10 system, running on a Toshiba Satellite U305. Video is a Intel 845GM, and I run 915resolution at start to make X happy with the correct widescreen resolution.

A lot of data is collected here (if more is needed, tell me):
http://www.dea.icai.upcomillas.es/romano/linux/info/

1) The minor regression is that I cannot have any more a correct console. I tried a lot of combinations, but without a framebuffer, console is garbled by ubuntu splash and/or X. With the .config copied in the site above, I do not have console (a random pattern appears as I switch consoles). With intelfb framebuffer, sometime it works, sometime it doesn't work, and everytime break resume from STR. (I mean, the laptop seems to resume, but the screen is blank).

I have a doubt about this: is it possible that some state is maintained across reboots? Because sometime two reboots in a row led to different results; for example, after following
https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/147606

I had a nice console, but after the failed resume and a sysrq-b reboot, no console again.

2) LCD/CRT switch. It's the first time I tried it, so no idea if it ever worked. Without a CRT connected, nothing happens pressing the key combination (fn-F5), correctly. When I connected a overhead proyector (CRT), pressed fn-F5, and the LCD went off and the CRT on (ok); after that the LCD never came on again. pressing again fn-f5 two times lead to a all-off, a third time made the CRT switch on, and again. The laptop is working but the LCD stay black till the next reboot. (It is very similar to what seems to happen after resume).

3) on the nice side of things, it seems that now echo mem

Quoted 1 line

/sys/power/state works (at least in X, I do not have a console to test

it...).

Thank you very much,
Romano

Signature · 8 lines
Sorry for the disclaimer --- ¡I cannot stop it!



--
La presente comunicación tiene carácter confidencial y es para el exclusivo uso del destinatario indicado en la misma. Si Ud. no es el destinatario indicado, le informamos que cualquier forma de distribución, reproducción o uso de esta comunicación y/o de la información contenida en la misma están estrictamente prohibidos por la ley. Si Ud. ha recibido esta comunicación por error, por favor, notifíquelo inmediatamente al remitente contestando a este mensaje y proceda a continuación a destruirlo. Gracias por su colaboración.

This communication contains confidential information. It is for the exclusive use of the intended addressee. If you are not the intended addressee, please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited by law. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy this message. Thank you for your cooperation. 
#1 lore raw
Quoted 3 lines · Romano Giannetti

1) The minor regression is that I cannot have any more a correct console. I tried a lot of combinations, but without a framebuffer, console is garbled by ubuntu splash and/or X.

Are you sure that this is a kernel regression, not a xf86-video-i810 regression?

(On Gentoo, switching from X to console works with xf86-video-i810-2.1.1 but results in a black screen with xf86-video-i810-2.2.0.90.)

Signature · 3 lines
Stefan Richter
-=====-==--- --=- ==-==
http://arcgraph.de/sr/
#2 lore raw
Quoted 7 lines · Stefan Richter
Quoted 3 lines · Romano Giannetti

1) The minor regression is that I cannot have any more a correct console. I tried a lot of combinations, but without a framebuffer, console is garbled by ubuntu splash and/or X.

Are you sure that this is a kernel regression, not a xf86-video-i810 regression?

Yes, the X.Org developers are making major changes ATM and there have definitely been regressions because of them.

Best way to find out is to check whether booting with an earlier kernel solves the problem. If it does, it's most likely a kernel issue. If it does not, it's most likely an X.Org issue.

Quoted 2 lines

(On Gentoo, switching from X to console works with xf86-video-i810-2.1.1 but results in a black screen with xf86-video-i810-2.2.0.90.)

This sounds like that could be a bug I filed recently and which was solved in 2.2.1: http://bugs.freedesktop.org/show_bug.cgi?id=14481.

Cheers,
FJP

#3 lore raw
Quoted 6 lines · Frans Pop
Quoted 2 lines · Stefan Richter

(On Gentoo, switching from X to console works with xf86-video-i810-2.1.1 but results in a black screen with xf86-video-i810-2.2.0.90.)

This sounds like that could be a bug I filed recently and which was solved in 2.2.1: http://bugs.freedesktop.org/show_bug.cgi?id=14481.

Indeed, 2.2.1 fixes this issue for me.

Signature · 3 lines
Stefan Richter
-=====-==--- --=- ==-==
http://arcgraph.de/sr/
#4 lore raw
In reply to Frans Pop
Quoted 2 lines · Frans Pop

This sounds like that could be a bug I filed recently and which was solved in 2.2.1: http://bugs.freedesktop.org/show_bug.cgi?id=14481.

Yes, it seems the same. I will try as soon as I came around to a way to do it.

Could this account to the LCD/CRT switching problem to? This is the most critical to me, since I can't use the laptop to give presentations. I double checked if the key combination is managed in user space, but it seems that it did not send ACPI events nor keypresses, so I suspect that it is a kernel matter (or BIOS, maybe).

Romano

Signature · 8 lines
Sorry for the disclaimer --- ¡I cannot stop it!



--
La presente comunicación tiene carácter confidencial y es para el exclusivo uso del destinatario indicado en la misma. Si Ud. no es el destinatario indicado, le informamos que cualquier forma de distribución, reproducción o uso de esta comunicación y/o de la información contenida en la misma están estrictamente prohibidos por la ley. Si Ud. ha recibido esta comunicación por error, por favor, notifíquelo inmediatamente al remitente contestando a este mensaje y proceda a continuación a destruirlo. Gracias por su colaboración.

This communication contains confidential information. It is for the exclusive use of the intended addressee. If you are not the intended addressee, please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited by law. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy this message. Thank you for your cooperation. 
#5 lore raw
Quoted 8 lines · Romano Giannetti
Quoted 2 lines · Frans Pop

This sounds like that could be a bug I filed recently and which was solved in 2.2.1: http://bugs.freedesktop.org/show_bug.cgi?id=14481.

Yes, it seems the same. I will try as soon as I came around to a way to do it.

Could this account to the LCD/CRT switching problem to?

I'm afraid I can't help you there.

As I said before, the only way to make sure is to see if the problem gets solved if you boot the system with an older kernel version.

#6 lore raw
Quoted 8 lines · Frans Pop

do it.

Quoted 2 lines

Could this account to the LCD/CRT switching problem to?

I'm afraid I can't help you there.

As I said before, the only way to make sure is to see if the problem gets solved if you boot the system with an older kernel version.

Well, in this case I do not think it ever worked, so it's not a regression. But still would it be nice to solve it... thanks anyway!

Romano

Signature · 8 lines
Sorry for the disclaimer --- ¡I cannot stop it!



--
La presente comunicación tiene carácter confidencial y es para el exclusivo uso del destinatario indicado en la misma. Si Ud. no es el destinatario indicado, le informamos que cualquier forma de distribución, reproducción o uso de esta comunicación y/o de la información contenida en la misma están estrictamente prohibidos por la ley. Si Ud. ha recibido esta comunicación por error, por favor, notifíquelo inmediatamente al remitente contestando a este mensaje y proceda a continuación a destruirlo. Gracias por su colaboración.

This communication contains confidential information. It is for the exclusive use of the intended addressee. If you are not the intended addressee, please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited by law. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy this message. Thank you for your cooperation. 
#7 lore raw
Quoted 10 lines · Romano Giannetti
Quoted 6 lines · Frans Pop
Quoted 1 line

Could this account to the LCD/CRT switching problem to?

I'm afraid I can't help you there.

As I said before, the only way to make sure is to see if the problem gets solved if you boot the system with an older kernel version.

Well, in this case I do not think it ever worked, so it's not a regression.

Ah, OK. That wasn't clear to me.
If it's not a regression, tracing the problem will be much harder.

The best way to start is probably just to google to see if other people with the same laptop or video controller have the same issues (and maybe solutions). Look for installation reports for your laptop model for example.

Quoted 1 line

But still would it be nice to solve it... thanks anyway!

I have had LCD/VRT switching issues with my laptop as well (a Toshiba Satellite A40). The Fn key did always work, but the output after switching would be garbled and I could not switch back. This was finally fixed about a year ago with the new Intel drivers and xrandr 1.2.

Your problem may be totally different though and could possibly be related to the function keys, or indeed to the BIOS.
Note that some laptops need special kernel modules or user space programs to be loaded for the Fn keys to be supported. Have you checked for that?

#8 lore raw
In reply to Romano Giannetti
Quoted 6 lines · Romano Giannetti
Quoted 2 lines · Frans Pop

This sounds like that could be a bug I filed recently and which was solved in 2.2.1: http://bugs.freedesktop.org/show_bug.cgi?id=14481.

Yes, it seems the same. I will try as soon as I came around to a way to do it.

Good to see we're fixing things for some people at least (re: Stephan's message).

Quoted 5 lines

Could this account to the LCD/CRT switching problem to? This is the most critical to me, since I can't use the laptop to give presentations. I double checked if the key combination is managed in user space, but it seems that it did not send ACPI events nor keypresses, so I suspect that it is a kernel matter (or BIOS, maybe).

The 2.2.1 release may nor may not affect your LCD/CRT switching, but I know at least 2.6.25-rc3 has some ACPI key event reporting issues that may be fixed now (at least in the ACPI tree).

Jesse