b43: Add QOS support

Index: wireless-testing/drivers/net/wireless/b43/b43.h
===================================================================
@@ -96,12 +96,14 @@
 #define B43_MMIO_TSF_CFP_START_HIGH	0x606
 #define B43_MMIO_TSF_0			0x632	/* core rev < 3 only */
 #define B43_MMIO_TSF_1			0x634	/* core rev < 3 only */
 #define B43_MMIO_TSF_2			0x636	/* core rev < 3 only */
 #define B43_MMIO_TSF_3			0x638	/* core rev < 3 only */
 #define B43_MMIO_RNG			0x65A
+#define B43_MMIO_IFSCTL			0x688 /* Interframe space control */
+#define  B43_MMIO_IFSCTL_USE_EDCF	0x0004
 #define B43_MMIO_POWERUP_DELAY		0x6A8
 
 /* SPROM boardflags_lo values */
 #define B43_BFL_BTCOEXIST		0x0001	/* implements Bluetooth coexistance */
 #define B43_BFL_PACTRL			0x0002	/* GPIO 9 controlling the PA */
 #define B43_BFL_AIRLINEMODE		0x0004	/* implements GPIO 13 radio disable indication */

@@ -618,12 +620,41 @@ struct b43_key {
 	 * keyconf is a cookie. Don't derefenrence it outside of the set_key
 	 * path, because b43 doesn't own it. */
 	struct ieee80211_key_conf *keyconf;
 	u8 algorithm;
 };
 
+/* SHM offsets to the QOS data structures for the 4 different queues. */
+#define B43_QOS_PARAMS(queue)	(B43_SHM_SH_EDCFQ + \
+				 (B43_NR_QOSPARAMS * sizeof(u16) * (queue)))
+#define B43_QOS_BACKGROUND	B43_QOS_PARAMS(0)
+#define B43_QOS_BESTEFFORT	B43_QOS_PARAMS(1)
+#define B43_QOS_VIDEO		B43_QOS_PARAMS(2)
+#define B43_QOS_VOICE		B43_QOS_PARAMS(3)
+
+/* QOS parameter hardware data structure offsets. */
+#define B43_NR_QOSPARAMS	22
+enum {
+	B43_QOSPARAM_TXOP = 0,
+	B43_QOSPARAM_CWMIN,
+	B43_QOSPARAM_CWMAX,
+	B43_QOSPARAM_CWCUR,
+	B43_QOSPARAM_AIFS,
+	B43_QOSPARAM_BSLOTS,
+	B43_QOSPARAM_REGGAP,
+	B43_QOSPARAM_STATUS,
+};
+
+/* QOS parameters for a queue. */
+struct b43_qos_params {
+	/* The QOS parameters */
+	struct ieee80211_tx_queue_params p;
+	/* Does this need to get uploaded to hardware? */
+	bool need_hw_update;
+};
+
 struct b43_wldev;
 
 /* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
 struct b43_wl {
 	/* Pointer to the active wireless device on this chip */
 	struct b43_wldev *current_dev;

@@ -670,12 +701,18 @@ struct b43_wl {
 
 	/* The beacon we are currently using (AP or IBSS mode).
 	 * This beacon stuff is protected by the irq_lock. */
 	struct sk_buff *current_beacon;
 	bool beacon0_uploaded;
 	bool beacon1_uploaded;
+
+	/* The current QOS parameters for the 4 queues.
+	 * This is protected by the irq_lock. */
+	struct b43_qos_params qos_params[4];
+	/* Workqueue for updating QOS parameters in hardware. */
+	struct work_struct qos_update_work;
 };
 
 /* In-memory representation of a cached microcode file. */
 struct b43_firmware_file {
 	const char *filename;
 	const struct firmware *data;

174 lines not on this page · raw message

255 lines not on this page · raw message

Index: wireless-testing/drivers/net/wireless/b43/xmit.c
===================================================================
@@ -702,33 +702,6 @@ void b43_tx_suspend(struct b43_wldev *de
 
 /* Resume any TX operation on the device (resume the hardware queues) */
 void b43_tx_resume(struct b43_wldev *dev)
 {
 	b43_dma_tx_resume(dev);
 }
-
-#if 0
-static void upload_qos_parms(struct b43_wldev *dev,
-			     const u16 * parms, u16 offset)
-{
-	int i;
-
-	for (i = 0; i < B43_NR_QOSPARMS; i++) {
-		b43_shm_write16(dev, B43_SHM_SHARED,
-				offset + (i * 2), parms[i]);
-	}
-}
-#endif
-
-/* Initialize the QoS parameters */
-void b43_qos_init(struct b43_wldev *dev)
-{
-	/* FIXME: This function must probably be called from the mac80211
-	 * config callback. */
-	return;
-
-	b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF);
-	//FIXME kill magic
-	b43_write16(dev, 0x688, b43_read16(dev, 0x688) | 0x4);
-
-	/*TODO: We might need some stack support here to get the values. */
-}

Index: wireless-testing/drivers/net/wireless/b43/xmit.h
===================================================================
@@ -299,24 +299,12 @@ void b43_handle_txstatus(struct b43_wlde
 void b43_handle_hwtxstatus(struct b43_wldev *dev,
 			   const struct b43_hwtxstatus *hw);
 
 void b43_tx_suspend(struct b43_wldev *dev);
 void b43_tx_resume(struct b43_wldev *dev);
 
-#define B43_NR_QOSPARMS		22
-enum {
-	B43_QOSPARM_TXOP = 0,
-	B43_QOSPARM_CWMIN,
-	B43_QOSPARM_CWMAX,
-	B43_QOSPARM_CWCUR,
-	B43_QOSPARM_AIFS,
-	B43_QOSPARM_BSLOTS,
-	B43_QOSPARM_REGGAP,
-	B43_QOSPARM_STATUS,
-};
-void b43_qos_init(struct b43_wldev *dev);
 
 /* Helper functions for converting the key-table index from "firmware-format"
  * to "raw-format" and back. The firmware API changed for this at some revision.
  * We need to account for that here. */
 static inline int b43_new_kidx_api(struct b43_wldev *dev)
 {

Index: wireless-testing/drivers/net/wireless/b43/dma.h
===================================================================
@@ -242,12 +242,15 @@ struct b43_dmaring {
 	/* Boolean. Is this a TX ring? */
 	bool tx;
 	/* The type of DMA engine used. */
 	enum b43_dmatype type;
 	/* Boolean. Is this ring stopped at ieee80211 level? */
 	bool stopped;
+	/* The QOS priority assigned to this ring. Only used for TX rings.
+	 * This is the mac80211 "queue" value. */
+	u8 queue_prio;
 	/* Lock, only used for TX. */
 	spinlock_t lock;
 	struct b43_wldev *dev;
 #ifdef CONFIG_B43_DEBUG
 	/* Maximum number of used slots. */
 	int max_used_slots;

Index: wireless-testing/drivers/net/wireless/b43/main.h
===================================================================
@@ -35,12 +35,16 @@
 
 #define P4D_BYT3S(magic, nr_bytes)	u8 __p4dding##magic[nr_bytes]
 #define P4D_BYTES(line, nr_bytes)	P4D_BYT3S(line, nr_bytes)
 /* Magic helper macro to pad structures. Ignore those above. It's magic. */
 #define PAD_BYTES(nr_bytes)		P4D_BYTES( __LINE__ , (nr_bytes))
 
+
+extern int b43_modparam_qos;
+
+
 /* Lightweight function to convert a frequency (in Mhz) to a channel number. */
 static inline u8 b43_freq_to_channel_5ghz(int freq)
 {
 	return ((freq - 5000) / 5);
 }
 static inline u8 b43_freq_to_channel_2ghz(int freq)