Skip to contentSkip to conversation

driver: i2c - convert ioctl to unlocked_ioctl

CRIS Cyrill Gorcunov 1 participant 1 message Mar 6, 2008

lore
Share & tools
lore
#0 lore raw

The I2C driver ioctl handler is protected by spinlock anyway (not in obvious form though) - there is no need to use ioctl so we are able to use unlocked_ioctl instead

Also a bit cleanup is done

---

It's an arch I don't have - so test it please ;) Any comments are welcome

 arch-v10/drivers/i2c.c |   24 ++++++++++--------------
 arch-v32/drivers/i2c.c |   15 ++++++---------
 2 files changed, 16 insertions(+), 23 deletions(-)
arch/cris/arch-v10/drivers/i2c.c +10 -14
Index: linux-2.6.git/arch/cris/arch-v10/drivers/i2c.c
===================================================================
@@ -577,19 +577,15 @@ i2c_release(struct inode *inode, struct 
 
 /* Main device API. ioctl's to write or read to/from i2c registers.
  */
-
-static int
-i2c_ioctl(struct inode *inode, struct file *file,
-	  unsigned int cmd, unsigned long arg)
+static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
+	if (_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE)
 		return -EINVAL;
-	}
 
 	switch (_IOC_NR(cmd)) {
 		case I2C_WRITEREG:
 			/* write to an i2c slave */
-			D(printk("i2cw %d %d %d\n", 
+			D(printk("i2cw %d %d %d\n",
 				 I2C_ARGSLAVE(arg),
 				 I2C_ARGREG(arg),
 				 I2C_ARGVALUE(arg)));
@@ -601,26 +597,26 @@ i2c_ioctl(struct inode *inode, struct fi
 		{
 			unsigned char val;
 			/* read from an i2c slave */
-			D(printk("i2cr %d %d ", 
+			D(printk("i2cr %d %d ",
 				I2C_ARGSLAVE(arg),
 				I2C_ARGREG(arg)));
 			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
 			D(printk("= %d\n", val));
 			return val;
-		}					    
+		}
 		default:
 			return -EINVAL;
 
 	}
-	
+
 	return 0;
 }
 
 static const struct file_operations i2c_fops = {
-	.owner    = THIS_MODULE,
-	.ioctl    = i2c_ioctl,
-	.open     = i2c_open,
-	.release  = i2c_release,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= i2c_ioctl,
+	.open		= i2c_open,
+	.release	= i2c_release,
 };
 
 int __init
arch/cris/arch-v32/drivers/i2c.c +6 -9
Index: linux-2.6.git/arch/cris/arch-v32/drivers/i2c.c
===================================================================
@@ -648,13 +648,10 @@ i2c_release(struct inode *inode, struct 
 /* Main device API. ioctl's to write or read to/from i2c registers.
  */
 
-static int
-i2c_ioctl(struct inode *inode, struct file *file,
-	  unsigned int cmd, unsigned long arg)
+static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
+	if (_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE)
 		return -ENOTTY;
-	}
 
 	switch (_IOC_NR(cmd)) {
 		case I2C_WRITEREG:
@@ -687,10 +684,10 @@ i2c_ioctl(struct inode *inode, struct fi
 }
 
 static const struct file_operations i2c_fops = {
-	.owner =    THIS_MODULE,
-	.ioctl =    i2c_ioctl,
-	.open =     i2c_open,
-	.release =  i2c_release,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= i2c_ioctl,
+	.open		= i2c_open,
+	.release	= i2c_release,
 };
 
 static int __init i2c_init(void)