Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
PATCH 1/1 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
Signed-off-by Gerald Van Baren <[email protected]>
--- include/configs/MPC8360EMDS.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
include/configs/MPC8360EMDS.h +1 -0
@@ -194,6 +194,7 @@#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CFG_FLASH_BASE 0xFE000000/* FLASH base address */ #define CFG_FLASH_SIZE 32/* max FLASH size is 32M */ +#define CONFIG_FLASH_SHOW_PROGRESS 45/* count down from 45/5: 9..1 */ #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE/* Window base at flash base */ #define CFG_LBLAWAR0_PRELIM 0x80000018/* 32MB window size */
Signature · 1 line
1.5.4.1
PATCH 1/1 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
Quoted 10 lines · In message <[email protected]> you wrote:
Signed-off-by Gerald Van Baren <[email protected]>--- include/configs/MPC8360EMDS.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)include/configs/MPC8360EMDS.h +0
-0
include/configs/MPC8360EMDS.h line 200
Quoted 7 lines
include/configs/MPC8360EMDS.h +1
-0@@ -194,6 +194,7 @@#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CFG_FLASH_BASE 0xFE000000/* FLASH base address */ #define CFG_FLASH_SIZE 32/* max FLASH size is 32M */ +#define CONFIG_FLASH_SHOW_PROGRESS 45/* count down from 45/5: 9..1 */ #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE/* Window base at flash base */ #define CFG_LBLAWAR0_PRELIM 0x80000018/* 32MB window size */
Kim, do you intend to pick this up?
If not, please send a NAK to gvb.
Thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There is a multi-legged creature crawling on your shoulder. -- Spock, "A Taste of Armageddon", stardate 3193.9
PATCH 1/1 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
Quoted 22 lines · Wolfgang Denk
Quoted 10 lines · In message <[email protected]> you wrote:
Signed-off-by Gerald Van Baren <[email protected]>--- include/configs/MPC8360EMDS.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)include/configs/MPC8360EMDS.h +0
-0include/configs/MPC8360EMDS.h line 200
Quoted 7 lines
include/configs/MPC8360EMDS.h +1
-0@@ -194,6 +194,7 @@#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CFG_FLASH_BASE 0xFE000000/* FLASH base address */ #define CFG_FLASH_SIZE 32/* max FLASH size is 32M */ +#define CONFIG_FLASH_SHOW_PROGRESS 45/* count down from 45/5: 9..1 */ #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE/* Window base at flash base */ #define CFG_LBLAWAR0_PRELIM 0x80000018/* 32MB window size */ Kim, do you intend to pick this up?
Quoted 7 lines
If not, please send a NAK to gvb.
Thanks.
Best regards,
Wolfgang Denk
Kim picked it up yesterday.
Thanks,
gvb
PATCH 1/1 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
Quoted 2 lines · In message <[email protected]> you wrote:
Quoted 2 lines
Kim, do you intend to pick this up?
...
Quoted 1 line
Kim picked it up yesterday.
I've seen his message after sending my mail. I haven't seen a pull request yet, though.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The explanation requiring the fewest assumptions is the most likely to be correct. -- William of Occam