sysrq show-all-cpus
Subsystems (2)
PATCH 1/1 sysrq show-all-cpus
SysRQ-P is not always useful on SMP systems, since it usually ends up showing the backtrace of a CPU that is doing just fine, instead of the backtrace of the CPU that is having problems.
This patch adds SysRQ show-all-cpus(L), which shows the backtrace of every active CPU in the system. It skips idle CPUs because some SMP systems are just too large and we already know what the backtrace of the idle task looks like.
drivers/char/sysrq.c renamed from drivers/char/sysrq.c.multicpu +42 -0
@@ -196,6 +196,44 @@ static struct sysrq_key_op sysrq_showloc#define sysrq_showlocks_op (*(struct sysrq_key_op *)0)#endif +#ifdef CONFIG_SMP +static DEFINE_SPINLOCK (show_lock); +static void showacpu (void *dummy) +{ +unsigned long flags; + +/* Idle CPUs have no interesting backtrace. */ +if (idle_cpu (smp_processor_id ())) +return ; + +spin_lock_irqsave (&show_lock, flags); +printk ("CPU%d:\n" ,smp_processor_id ()); +show_stack (NULL ,NULL ); +spin_unlock_irqrestore (&show_lock, flags); +} +static void sysrq_showregs_othercpus (struct work_struct *dummy) +{ +smp_call_function (showacpu,NULL ,0 ,0 ); +} +static DECLARE_WORK(sysrq_showallcpus, sysrq_showregs_othercpus); + +static void sysrq_handle_showallcpus (int key,struct tty_struct *tty) +{ +struct pt_regs *regs =get_irq_regs (); +if (regs) { +printk ("CPU%d:\n" ,smp_processor_id ()); +show_regs (regs); + } +schedule_work (&sysrq_showallcpus); +} +static struct sysrq_key_op sysrq_showallcpus_op = { + .handler = sysrq_handle_showallcpus, + .help_msg ="show-all-cpus(L)" , + .action_msg ="Show backtrace of all active CPUs" , + .enable_mask =SYSRQ_ENABLE_DUMP , +}; +#endif +static void sysrq_handle_showregs (int key,struct tty_struct *tty) {struct pt_regs *regs =get_irq_regs ();
@@ -340,7 +378,11 @@ static struct sysrq_key_op *sysrq_key_ta &sysrq_kill_op,/* i */ NULL ,/* j */ &sysrq_SAK_op,/* k */ +#ifdef CONFIG_SMP + &sysrq_showallcpus_op,/* l */ +#elseNULL ,/* l */ +#endif &sysrq_showmem_op,/* m */ &sysrq_unrt_op, /* n *//* o: This will often be registered as 'Off' at init time */
Quoted 44 lines · On Mon, 10 Mar 2008 13:32:42 -0400 Rik van Riel <[email protected]> wrote:
SysRQ-P is not always useful on SMP systems, since it usually ends up showing the backtrace of a CPU that is doing just fine, instead of the backtrace of the CPU that is having problems.
This patch adds SysRQ show-all-cpus(L), which shows the backtrace of every active CPU in the system. It skips idle CPUs because some SMP systems are just too large and we already know what the backtrace of the idle task looks like.
Signed-off-by Rik van Riel <[email protected]>diff -up linux-2.6.25-rc3-mm1/drivers/char/sysrq.c.multicpu
linux-2.6.25-rc3-mm1/drivers/char/sysrq.cdrivers/char/sysrq.c renamed from drivers/char/sysrq.c.multicpu +27
-0@@ -196,6 +196,44 @@ static struct sysrq_key_op sysrq_showloc#define sysrq_showlocks_op (*(struct sysrq_key_op *)0)#endif +#ifdef CONFIG_SMP +static DEFINE_SPINLOCK (show_lock); +static void showacpu (void *dummy) +{ +unsigned long flags; + +/* Idle CPUs have no interesting backtrace. */ +if (idle_cpu (smp_processor_id ())) +return ; + +spin_lock_irqsave (&show_lock, flags); +printk ("CPU%d:\n" ,smp_processor_id ()); +show_stack (NULL ,NULL ); +spin_unlock_irqrestore (&show_lock, flags); +} +static void sysrq_showregs_othercpus (struct work_struct *dummy) +{ +smp_call_function (showacpu,NULL ,0 ,0 ); +} +static DECLARE_WORK(sysrq_showallcpus, sysrq_showregs_othercpus); + +static void sysrq_handle_showallcpus (int key,struct tty_struct *tty) +{ +struct pt_regs *regs =get_irq_regs (); +if (regs) { +printk ("CPU%d:\n" ,smp_processor_id ()); +show_regs (regs);
drivers/char/sysrq.c static struct sysrq_key_op sysrq_showloc · line 235
Quoted 10 lines
drivers/char/sysrq.c renamed from drivers/char/sysrq.c.multicpu +10
-0+ } +schedule_work (&sysrq_showallcpus); +} +static struct sysrq_key_op sysrq_showallcpus_op = { + .handler = sysrq_handle_showallcpus, + .help_msg ="show-all-cpus(L)" , + .action_msg ="Show backtrace of all active CPUs" , + .enable_mask =SYSRQ_ENABLE_DUMP , +}; +#endif
So the CPU which took the interrupt is always the first to display - that's nice.
Even if it's idle. I guess that's OK.
How come the sysrq-handling CPU uses show_regs() and the others use show_stack()? Do we not set up the get_irq_regs() data for IPIs?
Quoted 15 lines
drivers/char/sysrq.c renamed from drivers/char/sysrq.c.multicpu +4
-0static void sysrq_handle_showregs (int key,struct tty_struct *tty) {struct pt_regs *regs =get_irq_regs ();@@ -340,7 +378,11 @@ static struct sysrq_key_op *sysrq_key_ta &sysrq_kill_op,/* i */ NULL ,/* j */ &sysrq_SAK_op,/* k */ +#ifdef CONFIG_SMP + &sysrq_showallcpus_op,/* l */ +#elseNULL ,/* l */ +#endif &sysrq_showmem_op,/* m */ &sysrq_unrt_op, /* n *//* o: This will often be registered as 'Off' at init time */
Quoted 2 lines · On Mon, 10 Mar 2008 10:41:54 -0700 Andrew Morton <[email protected]>…
How come the sysrq-handling CPU uses
show_regs()and the others useshow_stack()? Do we not set up theget_irq_regs()data for IPIs?
I tried it that way, and the other CPUs never printed anything.
I guess get_irq_regs() data is not present when in an IPI.
Signature · 1 line
All rights reversed.
Quoted 9 lines · On Mon, 10 Mar 2008 13:32:42 -0400 Rik van Riel wrote:
SysRQ-P is not always useful on SMP systems, since it usually ends up showing the backtrace of a CPU that is doing just fine, instead of the backtrace of the CPU that is having problems.
This patch adds SysRQ show-all-cpus(L), which shows the backtrace of every active CPU in the system. It skips idle CPUs because some SMP systems are just too large and we already know what the backtrace of the idle task looks like.
Signed-off-by Rik van Riel <[email protected]>
Hi,
Please update Documentation/sysrq.txt also.
---
~Randy
PATCH 1/1 sysrq show-all-cpus
SysRQ-P is not always useful on SMP systems, since it usually ends up showing the backtrace of a CPU that is doing just fine, instead of the backtrace of the CPU that is having problems.
This patch adds SysRQ show-all-cpus(L), which shows the backtrace of every active CPU in the system. It skips idle CPUs because some SMP systems are just too large and we already know what the backtrace of the idle task looks like.
Documentation/sysrq.txt renamed from Documentation/sysrq.txt.multicpu +2 -0
@@ -85,6 +85,8 @@ On all - write a character to /proc/sys 'k' - Secure Access Key (SAK) Kills all programs on the current virtual console. NOTE: See important comments below in SAK section. +'l' - Shows a stack backtrace for all active CPUs. + 'm' - Will dump current memory info to your console. 'n' - Used to make RT tasks nice-able
drivers/char/sysrq.c renamed from drivers/char/sysrq.c.multicpu +42 -0
55 lines not on this page · raw message
Quoted 14 lines · Rik van Riel
SysRQ-P is not always useful on SMP systems, since it usually ends up showing the backtrace of a CPU that is doing just fine, instead of the backtrace of the CPU that is having problems.
This patch adds SysRQ show-all-cpus(L), which shows the backtrace of every active CPU in the system. It skips idle CPUs because some SMP systems are just too large and we already know what the backtrace of the idle task looks like.
Signed-off-by Rik van Riel <[email protected]>diff -up linux-2.6.25-rc3-mm1/Documentation/sysrq.txt.multicpu
linux-2.6.25-rc3-mm1/Documentation/sysrq.txt
Documentation/sysrq.txt On all - write a character to /proc/sys · line 92
Quoted 8 lines
Documentation/sysrq.txt renamed from Documentation/sysrq.txt.multicpu +2
-0@@ -85,6 +85,8 @@ On all - write a character to /proc/sys 'k' - Secure Access Key (SAK) Kills all programs on the current virtual console. NOTE: See important comments below in SAK section. +'l' - Shows a stack backtrace for all active CPUs. + 'm' - Will dump current memory info to your console. 'n' - Used to make RT tasks nice-able
Yep, thanks.
A diffstat is also appreciated (in the future).
Signature · 1 line
~Randy
Quoted 9 lines · Rik van Riel
SysRQ-P is not always useful on SMP systems, since it usually ends up showing the backtrace of a CPU that is doing just fine, instead of the backtrace of the CPU that is having problems.
This patch adds SysRQ show-all-cpus(L), which shows the backtrace of every active CPU in the system. It skips idle CPUs because some SMP systems are just too large and we already know what the backtrace of the idle task looks like.
Signed-off-by Rik van Riel <[email protected]>
Why not have it just print the local CPU on non-SMP anyway?
Jon.
Quoted 5 lines · On Tue, 11 Mar 2008 03:18:24 -0400 Jon Masters <[email protected]> wrote:
Quoted 4 lines · Rik van Riel
SysRQ-P is not always useful on SMP systems, since it usually ends up showing the backtrace of a CPU that is doing just fine, instead of the backtrace of the CPU that is having problems.
Quoted 7 lines
Quoted 5 lines
This patch adds SysRQ show-all-cpus(L), which shows the backtrace of every active CPU in the system. It skips idle CPUs because some SMP systems are just too large and we already know what the backtrace of the idle task looks like.
Signed-off-by Rik van Riel <[email protected]>Why not have it just print the local CPU on non-SMP anyway?
Sysrq p already does exactly that.
Signature · 1 line
All rights reversed.
Quoted 12 lines · Rik van Riel
Quoted 9 lines · On Tue, 11 Mar 2008 03:18:24 -0400 Jon Masters <[email protected]> wrote:
Quoted 8 lines · Rik van Riel
SysRQ-P is not always useful on SMP systems, since it usually ends up showing the backtrace of a CPU that is doing just fine, instead of the backtrace of the CPU that is having problems.
This patch adds SysRQ show-all-cpus(L), which shows the backtrace of every active CPU in the system. It skips idle CPUs because some SMP systems are just too large and we already know what the backtrace of the idle task looks like.
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Rik van Riel <[email protected]>Why not have it just print the local CPU on non-SMP anyway?
Sysrq p already does exactly that.
That's my point. I understand why there's a new command, because it is different from 'p', but probably worth doing something on non-SMP too.
Jon.
Quoted 9 lines · Rik van Riel
SysRQ-P is not always useful on SMP systems, since it usually ends up showing the backtrace of a CPU that is doing just fine, instead of the backtrace of the CPU that is having problems.
This patch adds SysRQ show-all-cpus(L), which shows the backtrace of every active CPU in the system. It skips idle CPUs because some SMP systems are just too large and we already know what the backtrace of the idle task looks like.
Yeah we need something like this. I prefer mine though ;) It shows registers as well as stack...
http://groups.google.com.au/group/fa.linux.kernel/msg/3cd0288f7fd3be2c?dmode=source&output=gplain
It prints just a single CPU at a time, but cycles through each one. An alternative might be to have one sysrq key used to cycle between CPUs, and sysrq+P could then just print out a trace from the selected CPU...