Skip to contentSkip to conversation

ide: mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted

PATCH New Bartlomiej Zolnierkiewicz 1 participant 1 message Mar 11, 2008

Subsystems (2)
Documentation libata
lore
Share & tools
lore

Bartlomiej Zolnierkiewicz

author
#0 lore raw

PATCH 2/3 ide: mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted

Mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted (nowadays device-driver binding can be changed at runtime through sysfs
and it can also be dealt with using per device driver parameters).

Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>
---
 Documentation/ide/ide.txt |    4 ----
 drivers/ide/ide.c         |    4 ++--
 2 files changed, 2 insertions(+), 6 deletions(-)
Documentation/ide/ide.txt +0 -4
Index: b/Documentation/ide/ide.txt
===================================================================
@@ -219,10 +219,6 @@ Summary of ide driver parameters for ker
 
  "hdx=nodma"		: disallow DMA
 
- "hdx=scsi"		: the return of the ide-scsi flag, this is useful for
- 			  allowing ide-floppy, ide-tape, and ide-cdrom|writers
- 			  to use ide-scsi emulation on a device specific option.
-
  "idebus=xx"		: inform IDE driver of VESA/PCI bus speed in MHz,
 			  where "xx" is between 20 and 66 inclusive,
 			  used when tuning chipset PIO modes.
drivers/ide/ide.c +2 -2
Index: b/drivers/ide/ide.c
===================================================================
@@ -919,7 +919,7 @@ static int __init ide_setup(char *s)
 		drive = &hwif->drives[unit];
 		if (strncmp(s + 4, "ide-", 4) == 0) {
 			strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
-			goto done;
+			goto obsolete_option;
 		}
 		switch (match_parm(&s[3], hd_words, vals, 3)) {
 			case -1: /* "none" */

@@ -952,7 +952,7 @@ static int __init ide_setup(char *s)
 				goto done;
 			case -14: /* "scsi" */
 				drive->scsi = 1;
-				goto done;
+				goto obsolete_option;
 			case 3: /* cyl,head,sect */
 				drive->media	= ide_disk;
 				drive->ready_stat = READY_STAT;