ARM custodian change
Here a short announcement about a change in the U-Boot ARM custodianship:
Since the ARM platform is so broad and has multiple vendor specific "sub-architectures" it seemed necessary to add new U-Boot custodian branches for those architectures. Fortunately we had some volunteers. Here the list:
u-boot-at91 (Atmel ARM) Jean-Christophe Plagniol-Villard u-boot-pxa (XScale) Jean-Christophe Plagniol-Villard u-boot-s3c24xx (Samsung ARM) Harald Welte
Again, thanks a lot to the (new) custodians. Your help is really appreciated.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
Quoted 10 lines · In message <[email protected]> you wrote:
Here a short announcement about a change in the U-Boot ARM custodianship:
Since the ARM platform is so broad and has multiple vendor specific "sub-architectures" it seemed necessary to add new U-Boot custodian branches for those architectures. Fortunately we had some volunteers. Here the list:
u-boot-at91 (Atmel ARM) Jean-Christophe Plagniol-Villard u-boot-pxa (XScale) Jean-Christophe Plagniol-Villard u-boot-s3c24xx (Samsung ARM) Harald Welte
The new repositories have been set up and should be operational now.
Viele Gr??e,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Commitment, n.: Commitment can be illustrated by a breakfast of ham and eggs. The chicken was involved, the pig was committed.
Quoted 7 lines
Here a short announcement about a change in the U-Boot ARM custodianship:
Since the ARM platform is so broad and has multiple vendor specific "sub-architectures" it seemed necessary to add new U-Boot custodian branches for those architectures. Fortunately we had some volunteers. Here the list:
Quoted 6 lines
u-boot-at91 (Atmel ARM) Jean-Christophe Plagniol-Villard u-boot-pxa (XScale) Jean-Christophe Plagniol-Villard u-boot-s3c24xx (Samsung ARM) Harald WelteAgain, thanks a lot to the (new) custodians. Your help is really appreciated.
Would it not be better if the Atmel ARM was handled by the Atmel AT91 Product line
Best Regards
Ulf Samuelsson
Quoted 11 lines · Ulf Samuelsson
Quoted 11 lines
Here a short announcement about a change in the U-Boot ARM custodianship:
Since the ARM platform is so broad and has multiple vendor specific "sub-architectures" it seemed necessary to add new U-Boot custodian branches for those architectures. Fortunately we had some volunteers. Here the list:
u-boot-at91 (Atmel ARM) Jean-Christophe Plagniol-Villard u-boot-pxa (XScale) Jean-Christophe Plagniol-Villard u-boot-s3c24xx (Samsung ARM) Harald Welte
Quoted 5 lines
Quoted 2 lines
Again, thanks a lot to the (new) custodians. Your help is really appreciated.
Would it not be better if the Atmel ARM was handled by the Atmel AT91 Product line
Could be, I really don't know. I don't remember seeing Atmel ARM patches posted or reviewed by other Atmel than yourself.
So for the time being, we gladly accept that Jean-Christophe volunteered to take over this custodianship. From my point of view, he is doing a very good job with his other U-Boot activities. So I expect that the AT91 support could be handled better from now on.
But again, we are open for other suggestions here too. If you think someone at Atmel is better suited to do this job, then please let us know.
BTW: If somebody else feels suited to take over some open custodianships (PCI, RTC, HWMON come to my mind right now), please let us know too. :)
Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
Quoted 12 lines · Ulf Samuelsson
Quoted 11 lines
Quoted 11 lines
Here a short announcement about a change in the U-Boot ARM custodianship:
Since the ARM platform is so broad and has multiple vendor specific "sub-architectures" it seemed necessary to add new U-Boot custodian branches for those architectures. Fortunately we had some volunteers. Here the list:
u-boot-at91 (Atmel ARM) Jean-Christophe Plagniol-Villard u-boot-pxa (XScale) Jean-Christophe Plagniol-Villard u-boot-s3c24xx (Samsung ARM) Harald Welte
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Again, thanks a lot to the (new) custodians. Your help is really appreciated.
Would it not be better if the Atmel ARM was handled by the Atmel AT91 Product line
Could be, I really don't know. I don't remember seeing Atmel ARM patches posted or reviewed by other Atmel than yourself.
They were sent in 3-4 years ago.
Since there were no response, they lost interest, and have not tried since then. They are maintaining a separate U-Boot source package.
Quoted 5 lines
So for the time being, we gladly accept that Jean-Christophe volunteered to take over this custodianship. From my point of view, he is doing a very good job with his other U-Boot activities. So I expect that the AT91 support could be handled better from now on.
Have no criticism against Jean-Christophe, but I think that support for new chips may be available earlier with the AT91 team.
Quoted 3 lines
But again, we are open for other suggestions here too. If you think someone at Atmel is better suited to do this job, then please let us know.
I will not have the time to maintain, that is for sure.
I think that the issue needs to be raised with the AT91 team, but it might be that the AT91 team decides that they rather work closely with Jean-Christophe.
Andrew Victor is doing a good job maintaining the AT91 Linux port so there is a precedent for this already.
Quoted 9 lines
BTW: If somebody else feels suited to take over some open custodianships (PCI, RTC, HWMON come to my mind right now), please let us know too. :)
Thanks.
Best regards,
Stefan
Best Regards
Ulf Samuelsson
Quoted 9 lines · Ulf Samuelsson
Quoted 5 lines
Quoted 2 lines
Would it not be better if the Atmel ARM was handled by the Atmel AT91 Product line
Could be, I really don't know. I don't remember seeing Atmel ARM patches posted or reviewed by other Atmel than yourself.
They were sent in 3-4 years ago.
Since there were no response, they lost interest, and have not tried since then. They are maintaining a separate U-Boot source package.
Too bad. I think it would be a good idea, if "they" would try to work with the "official" U-Boot community again. Now with the custodian framework in place, some problems of the past should be solved.
Quoted 7 lines
Quoted 4 lines
So for the time being, we gladly accept that Jean-Christophe volunteered to take over this custodianship. From my point of view, he is doing a very good job with his other U-Boot activities. So I expect that the AT91 support could be handled better from now on.
Have no criticism against Jean-Christophe, but I think that support for new chips may be available earlier with the AT91 team.
Right. That's for sure.
Quoted 5 lines
Quoted 3 lines
But again, we are open for other suggestions here too. If you think someone at Atmel is better suited to do this job, then please let us know.
I will not have the time to maintain, that is for sure.
Understood.
Quoted 3 lines
I think that the issue needs to be raised with the AT91 team, but it might be that the AT91 team decides that they rather work closely with Jean-Christophe.
That's of course also an option.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
Quoted 7 lines · Ulf Samuelsson
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
Would it not be better if the Atmel ARM was handled by the Atmel AT91 Product line
Could be, I really don't know. I don't remember seeing Atmel ARM patches posted or reviewed by other Atmel than yourself.
Quoted 8 lines
Quoted 3 lines
They were sent in 3-4 years ago.
Since there were no response, they lost interest, and have not tried since then. They are maintaining a separate U-Boot source package.Too bad. I think it would be a good idea, if "they" would try to work with the "official" U-Boot community again. Now with the custodian framework in place, some problems of the past should be solved.
I 'bcc' our own "Jean-Christophe" (Zettel) running the AT91 apps team and he will have to discuss with the S/W team and decide.
Quoted 18 lines
Quoted 7 lines
Quoted 4 lines
So for the time being, we gladly accept that Jean-Christophe volunteered to take over this custodianship. From my point of view, he is doing a very good job with his other U-Boot activities. So I expect that the AT91 support could be handled better from now on.
Have no criticism against Jean-Christophe, but I think that support for new chips may be available earlier with the AT91 team.
Right. That's for sure.
Quoted 5 lines
Quoted 3 lines
But again, we are open for other suggestions here too. If you think someone at Atmel is better suited to do this job, then please let us know.
I will not have the time to maintain, that is for sure.
Understood.
Quoted 8 lines
Quoted 3 lines
I think that the issue needs to be raised with the AT91 team, but it might be that the AT91 team decides that they rather work closely with Jean-Christophe.
That's of course also an option.
Best regards,
Stefan
Best Regards
Ulf Samuelsson ulf at atmel.com
Atmel Nordic AB
Mail: Box 2033, 174 02 Sundbyberg, Sweden Visit: Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22 Fax +46 (8) 441 54 29
GSM +46 (706) 22 44 57
Join the Atmel 2008 Microcontroller Seminar April 7-10. Introducing X-Mega, AVR32 and ARM9. STK600 Kit included. Register at Acte, Arrow or EBV webpage.
Technical support when I am not available:
AT90 AVR Applications Group: mailto:avr at atmel.com AT91 ARM Applications Group: mailto:at91support at atmel.com
AVR32 Applications Group mailto:avr32 at atmel.com
http://www.avrfreaks.net/; http://avr32linux.org/
http://www.at91.com/ ; http://www.linux4sam.org/
Quoted 6 lines · Ulf Samuelsson <ulf.samuelsson <at> atmel.com> writes:
Quoted 3 lines
Too bad. I think it would be a good idea, if "they" would try to work with the "official" U-Boot community again. Now with the custodian framework in place, some problems of the past should be solved.
I 'bcc' our own "Jean-Christophe" (Zettel) running the AT91 apps team and he will have to discuss with the S/W team and decide.
"We" (the AT91 S/W team) are glad to work with the "one and only" U-Boot community. It is the first step to move to the last codebase that is the hardest.
The work done by Stelian Pop to integrate AT91CAP9 shows the way for all AT91SAM9 support. We will for sure work with Stelian Pop, Jean-Christophe Plagniol-Villard , yourself the whole AT91 U-Boot community to have a smooth transition to the latest codebase.
Regards,
Signature · 1 line
Nicolas Ferre
Le jeudi 20 mars 2008 ? 17:36 +0000, Nicolas Ferre a ?crit :
Quoted 9 lines
Quoted 6 lines · Ulf Samuelsson <ulf.samuelsson <at> atmel.com> writes:
Quoted 3 lines
Too bad. I think it would be a good idea, if "they" would try to work with the "official" U-Boot community again. Now with the custodian framework in place, some problems of the past should be solved.
I 'bcc' our own "Jean-Christophe" (Zettel) running the AT91 apps team and he will have to discuss with the S/W team and decide.
Quoted 8 lines
"We" (the AT91 S/W team) are glad to work with the "one and only" U-Boot community. It is the first step to move to the last codebase that is the hardest.
The work done by Stelian Pop to integrate AT91CAP9 shows the way for all AT91SAM9 support. We will for sure work with Stelian Pop, Jean-Christophe Plagniol-Villard , yourself the whole AT91 U-Boot community to have a smooth transition to the latest codebase.
As a matter of fact, Atmel has already provided me with the necessary hardware. I will shortly, as time permits, start feeding the list with AT91SAM patches...
Signature · 1 line
Stelian Pop <[email protected]>
Quoted 10 lines · Nicolas Ferre
Quoted 6 lines · Ulf Samuelsson <ulf.samuelsson <at> atmel.com> writes:
Quoted 3 lines
Too bad. I think it would be a good idea, if "they" would try to work with the "official" U-Boot community again. Now with the custodian framework in place, some problems of the past should be solved.
I 'bcc' our own "Jean-Christophe" (Zettel) running the AT91 apps team and he will have to discuss with the S/W team and decide.
"We" (the AT91 S/W team) are glad to work with the "one and only" U-Boot community.
That's really great news.
Quoted 2 lines
It is the first step to move to the last codebase that is the hardest.
Right.
Quoted 4 lines
The work done by Stelian Pop to integrate AT91CAP9 shows the way for all AT91SAM9 support. We will for sure work with Stelian Pop, Jean-Christophe Plagniol-Villard , yourself the whole AT91 U-Boot community to have a smooth transition to the latest codebase.
Thank you Nicolas. Really appreciated.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
Quoted 25 lines · Nicolas Ferre
Quoted 10 lines
Quoted 6 lines · Ulf Samuelsson <ulf.samuelsson <at> atmel.com> writes:
Quoted 3 lines
Too bad. I think it would be a good idea, if "they" would try to work with the "official" U-Boot community again. Now with the custodian framework in place, some problems of the past should be solved.
I 'bcc' our own "Jean-Christophe" (Zettel) running the AT91 apps team and he will have to discuss with the S/W team and decide.
"We" (the AT91 S/W team) are glad to work with the "one and only" U-Boot community.
That's really great news.
Quoted 2 lines
It is the first step to move to the last codebase that is the hardest.
Right.
Quoted 4 lines
The work done by Stelian Pop to integrate AT91CAP9 shows the way for all AT91SAM9 support. We will for sure work with Stelian Pop, Jean-Christophe Plagniol-Villard , yourself the whole AT91 U-Boot community to have a smooth transition to the latest codebase.
Quoted 5 lines
Thank you Nicolas. Really appreciated.
Best regards,
Stefan
Yes, I think we have an agreement between all involved parties then!
Best Regards
Ulf Samuelsson
Quoted 11 lines · Ulf Samuelsson <ulf.samuelsson <at> atmel.com> writes:
Quoted 11 lines · Ulf Samuelsson
Quoted 9 lines
Quoted 9 lines
Here a short announcement about a change in the U-Boot ARM custodianship:
Since the ARM platform is so broad and has multiple vendor specific "sub-architectures" it seemed necessary to add new U-Boot custodian branches for those architectures. Fortunately we had some volunteers. Here the list:
u-boot-at91 (Atmel ARM) Jean-Christophe Plagniol-Villard
[..]
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Would it not be better if the Atmel ARM was handled by the Atmel AT91 Product line
We (the AT91 software team) do not have this opinion. It is very enriching to work with people from the community.
Quoted 7 lines
Quoted 2 lines
Could be, I really don't know. I don't remember seeing Atmel ARM patches posted or reviewed by other Atmel than yourself.
They were sent in 3-4 years ago.
Since there were no response, they lost interest, and have not tried since then.
They are maintaining a separate U-Boot source package.
Ulf, we do not lose interest ! We simply do not have the opportunity to rebase and test our work against the latest developments for all chips&boards.
This opportunity is here now and we will be glad to contribute.
Quoted 7 lines
Quoted 4 lines
So for the time being, we gladly accept that Jean-Christophe volunteered to take over this custodianship. From my point of view, he is doing a very good job with his other U-Boot activities. So I expect that the AT91 support could be handled better from now on.
Have no criticism against Jean-Christophe, but I think that support for new chips may be available earlier with the AT91 team.
We will, for sure, work with Jean-Christophe and all AT91 u-boot contributors for new chips introduction.
Quoted 4 lines
Quoted 3 lines
But again, we are open for other suggestions here too. If you think someone at Atmel is better suited to do this job, then please let us know.
Quoted 8 lines
I will not have the time to maintain, that is for sure.
I think that the issue needs to be raised with the AT91 team, but it might be that the AT91 team decides that they rather work closely with Jean-Christophe.
Andrew Victor is doing a good job maintaining the AT91 Linux port so there is a precedent for this already.
It is exactly the kind of relationship we would like to build with the new custodian.
Regards,
Signature · 1 line
Nicolas Ferre
Quoted 6 lines · On Thu, 20 Mar 2008 17:12:36 +0000 (UTC) Nicolas Ferre…
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
u-boot-at91 (Atmel ARM) Jean-Christophe Plagniol-Villard
Ulf, we do not lose interest ! We simply do not have the opportunity to rebase and test our work against the latest developments for all chips&boards.
This opportunity is here now and we will be glad to contribute.
I'm very happy to hear that!
I think sharing drivers between AVR32 and AT91 has made both platforms better on Linux, and I hope we can do the same thing with u-boot (Stelian's patches are certainly a good start.)
Haavard