Skip to contentSkip to conversation

8xx: Add FDT support to 8xx

PATCH New Bryan O'Donoghue 3 participants 3 messages Feb 12, 2008 – Mar 25, 2008

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 8xx: Add FDT support to 8xx

Minimal - just a bare bones copy of code already done by others.

Adds the get_brgclk - for the purposes of enumerating a brg clock-frequency entry in a of tree. Adds fdt.c so that 8xx will have a ft_cpu_setup function.

---

cpu/mpc8xx/Makefile +1 -1
index 223b30c..dbdc2e0 100644
@@ -29,7 +29,7 @@ LIB	= $(obj)lib$(CPU).a
 
 START	= start.o kgdb.o
 COBJS	= bedbug_860.o commproc.o cpu.o cpu_init.o	\
-	  fec.o i2c.o interrupts.o lcd.o scc.o		\
+	  fec.o fdt.o i2c.o interrupts.o lcd.o scc.o	\
 	  serial.o speed.o spi.o \
 	  traps.o upatch.o video.o
 SOBJS	= plprcr_write.o
cpu/mpc8xx/speed.c +25 -0
index 11b0893..070babc 100644
@@ -174,6 +174,27 @@ unsigned long measure_gclk(void)
 
 #endif
 
+void get_brgclk(uint sccr)
+{
+	uint divider = 0;
+
+	switch((sccr&SCCR_DFBRG11)>>11){
+		case 0:
+			divider = 1;
+			break;
+		case 1:
+			divider = 4;
+			break;
+		case 2:
+			divider = 16;
+			break;
+		case 3:
+			divider = 64;
+			break;
+	}
+	gd->brg_clk = gd->cpu_clk/divider;
+}
+
 #if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
 
 /*
@@ -223,6 +244,8 @@ int get_clocks (void)
 		gd->bus_clk = gd->cpu_clk / 2;
 	}
 
+	get_brgclk(sccr);
+
 	return (0);
 }
 
@@ -254,6 +277,8 @@ int get_clocks_866 (void)
 	gd->cpu_clk = measure_gclk ();
 #endif
 
+	get_brgclk(immr->im_clkrst.car_sccr);
+
 	/* if cpu clock <= 66 MHz then set bus division factor to 1,
 	 * otherwise set it to 2
 	 */
include/asm-ppc/global_data.h +3 -0
index 05aee74..9e8018a 100644
@@ -42,6 +42,9 @@ typedef	struct	global_data {
 	unsigned long	baudrate;
 	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
 	unsigned long	bus_clk;
+#if defined(CONFIG_8xx)
+	unsigned long	brg_clk;
+#endif
 #if defined(CONFIG_CPM2)
 	/* There are many clocks on the MPC8260 - see page 9-5 */
 	unsigned long	vco_out;
cpu/mpc8xx/fdt.c new file +46 -0

46 lines not on this page · raw message

#1 lore raw

PATCH 1/3 8xx: Add FDT support to 8xx

cpu/mpc8xx/fdt.c line 34

Quoted 2 lines · Bryan O'Donoghue
cpu/mpc8xx/fdt.c new file +2 -0
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+		"timebase-frequency", bd->bi_busfreq / 8, 1);

I don't think this is correct for 8xx... use get_tbclk().

-Scott

#2 lore raw

PATCH 1/3 8xx: Add FDT support to 8xx

In reply to Bryan O'Donoghue

Dear Bryan,

Quoted 6 lines · un message <[email protected]> you wrote:

Minimal - just a bare bones copy of code already done by others.

Adds the get_brgclk - for the purposes of enumerating a brg clock-frequency entry in a of tree. Adds fdt.c so that 8xx will have a ft_cpu_setup function.

You didn't follow-up to Scott's comment. I'll drop this patch. Please resubmit.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"A great many people think they are thinking when they are merely re-
arranging their prejudices."                          - William James