Skip to contentSkip to conversation

Pull Request mpc86xx repository

U-Boot-Users Jon Loeliger 2 participants 3 messages Mar 25, 2008 – Mar 26, 2008

lore
Share & tools
lore
#0 lore raw

Wolfgang,

I have three outstanding patches to move a few Freescale boards from board/* to board/freescale/*. I wasn't sure if you would apply them directly or not, and didn't get any response from you when I asked. (No problem.)

So I decided to make it easier for you and just placed them in my -mpc86xx tree for you to pull directly. They have been rebased to the current top of tree.

If you would, please pick these up!

Thanks,
jdl

The following changes since commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f:
Yuri Tikhonov (1):
lwmon5 SYSMON POST: fix backlight control

are available in the git repository at:

git://www.denx.de/git/u-boot-mpc86xx.git master

Jon Loeliger (3):
FSL: Move board/mpc8260ads under board/freescale
FSL: Move board/mpc8266ads under board/freescale
FSL: Move board/mpc7448hpc2 under board/freescale

 Makefile                                        |   10 +++++-----
 board/{ => freescale}/mpc7448hpc2/Makefile      |    0
 board/{ => freescale}/mpc7448hpc2/asm_init.S    |    0
 board/{ => freescale}/mpc7448hpc2/config.mk     |    0
 board/{ => freescale}/mpc7448hpc2/mpc7448hpc2.c |    0
 board/{ => freescale}/mpc7448hpc2/tsi108_init.c |    0
 board/{ => freescale}/mpc7448hpc2/u-boot.lds    |    0
 board/{ => freescale}/mpc8260ads/Makefile       |    0
 board/{ => freescale}/mpc8260ads/config.mk      |    0
 board/{ => freescale}/mpc8260ads/flash.c        |    0
 board/{ => freescale}/mpc8260ads/mpc8260ads.c   |    0
 board/{ => freescale}/mpc8266ads/Makefile       |    0
 board/{ => freescale}/mpc8266ads/config.mk      |    0
 board/{ => freescale}/mpc8266ads/flash.c        |    0
 board/{ => freescale}/mpc8266ads/mpc8266ads.c   |    0
 15 files changed, 5 insertions(+), 5 deletions(-)
 rename board/{ => freescale}/mpc7448hpc2/Makefile (100%)
 rename board/{ => freescale}/mpc7448hpc2/asm_init.S (100%)
 rename board/{ => freescale}/mpc7448hpc2/config.mk (100%)
 rename board/{ => freescale}/mpc7448hpc2/mpc7448hpc2.c (100%)
 rename board/{ => freescale}/mpc7448hpc2/tsi108_init.c (100%)
 rename board/{ => freescale}/mpc7448hpc2/u-boot.lds (100%)
 rename board/{ => freescale}/mpc8260ads/Makefile (100%)
 rename board/{ => freescale}/mpc8260ads/config.mk (100%)
 rename board/{ => freescale}/mpc8260ads/flash.c (100%)
 rename board/{ => freescale}/mpc8260ads/mpc8260ads.c (100%)
 rename board/{ => freescale}/mpc8266ads/Makefile (100%)
 rename board/{ => freescale}/mpc8266ads/config.mk (100%)
 rename board/{ => freescale}/mpc8266ads/flash.c (100%)
 rename board/{ => freescale}/mpc8266ads/mpc8266ads.c (100%)
#1 lore raw
Quoted 11 lines · In message <[email protected]> you wrote:

I have three outstanding patches to move a few Freescale boards from board/* to board/freescale/*. I wasn't sure if you would apply them directly or not, and didn't get any response from you when I asked. (No problem.)

So I decided to make it easier for you and just placed them in my -mpc86xx tree for you to pull directly. They have been rebased to the current top of tree.

If you would, please pick these up!

Thanks, but actually this was not correct. None of these poatches is related to 86xx, so they have no place in your 86xx repo.

I ignore this pull request, assuming these were the only changes (which I pulled in from the mailing list before). If there is other stuff to pull, please shout!

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The number  of  Unix  installations  has  grown  to  10,  with  more
expected."    - The Unix Programmer's Manual, 2nd Edition, June, 1972
#2 lore raw
Quoted 6 lines · Wolfgang Denk

Thanks, but actually this was not correct. None of these poatches is related to 86xx, so they have no place in your 86xx repo.

I ignore this pull request, assuming these were the only changes (which I pulled in from the mailing list before). If there is other stuff to pull, please shout!

Yeah, that's all fine. There wasn't anything else there this round. Git will resolve it into all the repos, no problem.

Thanks,
jdl