iommu breaks usb after resume
Hi!
On 64-bit machine with 4GB ram (8core from amd), iommu breaks USB after swsusp. iommu=soft fixes that issue.
I guess iommu handling in arch/x86/kernel/ should have some suspend/resume support, as it manipulates hardware registers...?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 7 lines · Pavel Machek
Hi!
On 64-bit machine with 4GB ram (8core from amd), iommu breaks USB after swsusp. iommu=soft fixes that issue.
I guess iommu handling in
arch/x86/kernel/should have some suspend/resume support, as it manipulates hardware registers...?
agreed ...
Ingo
Quoted 7 lines · Pavel Machek
Hi!
On 64-bit machine with 4GB ram (8core from amd), iommu breaks USB after swsusp. iommu=soft fixes that issue.
I guess iommu handling in
arch/x86/kernel/should have some suspend/resume support, as it manipulates hardware registers...?
AGP suspend/resume should already handle restoring of the aperture and the IOMMU code uses the same. It has not other state. It might not work when the AGP driver is not compiled in/loaded though (I suspect that is what happened to you) One simple fix would be to just enforce that in Kconfig when suspend/resume is enabled.
-Andi
Hi!
Quoted 11 lines
Quoted 5 lines
On 64-bit machine with 4GB ram (8core from amd), iommu breaks USB after swsusp. iommu=soft fixes that issue.
I guess iommu handling in
arch/x86/kernel/should have some suspend/resume support, as it manipulates hardware registers...?AGP suspend/resume should already handle restoring of the aperture and the IOMMU code uses the same. It has not other state. It might not work when the AGP driver is not compiled in/loaded though (I suspect that is what happened to you) One simple fix would be to just enforce that in
Kconfigwhen suspend/resume is enabled.
I had:
CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not setCONFIG_AGP_VIA=yCONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
...do I need to enable something more?
Pavel
Signature · 3 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html pomozte zachranit klanovicky les: http://www.ujezdskystrom.info/
Quoted 9 lines
CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=y
#CONFIG_AGP_SISis not setCONFIG_AGP_VIA=yCONFIG_DRM=y
#CONFIG_DRM_TDFXis not set...do I need to enable something more?
Should have worked then. Ok modulo bugs. Maybe the ordering is wrong now (AGP resume would need to run before anything using the IOMMU)
-Andi
Hi!
Quoted 8 lines
Quoted 8 lines
CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=y
#CONFIG_AGP_SISis not setCONFIG_AGP_VIA=yCONFIG_DRM=y
#CONFIG_DRM_TDFXis not set
Quoted 5 lines
Quoted 1 line
...do I need to enable something more?
Should have worked then. Ok modulo bugs. Maybe the ordering is wrong now (AGP resume would need to run before anything using the IOMMU)
So agp_amd64_resume() is responsible for reiniting iommu on new amd64 boxes?
It is registered as normal pci driver:
static struct pci_driver agp_amd64_pci_driver = {
.name = "agpgart-amd64",
.id_table = agp_amd64_pci_table,
.probe = agp_amd64_probe,
.remove = agp_amd64_remove,
#ifdef CONFIG_PM
.suspend = agp_amd64_suspend,
.resume = agp_amd64_resume,#endif
};
...should it be modified to run early, as other pci devices (USB controllers) may rely on this?
I did this... I'll verify it in 10 hours or so. If someone has amd64 system with >=4G ram, there should be hibernation problems. This should fix it:
drivers/char/agp/amd64-agp.c +4 -2
@@ -594,12 +594,14 @@ static int agp_amd64_suspend(struct pci_static int agp_amd64_resume (struct pci_dev *pdev) { +printk ("agp_amd64: resume\n" );pci_set_power_state (pdev,PCI_D0 );pci_restore_state (pdev);if (pdev->vendor ==PCI_VENDOR_ID_NVIDIA )nforce3_agp_init (pdev); +printk ("agp_amd64: 8151 configure\n" );return amd_8151_configure (); }
@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume,#endif };
Pavel
Signature · 3 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html pomozte zachranit klanovicky les: http://www.ujezdskystrom.info/
drivers/char/agp/amd64-agp.c static struct pci_driver agp_amd64_pci_d · line 740
Quoted 9 lines · Pavel Machek
drivers/char/agp/amd64-agp.c +2
-2@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume, #endif
ah, makes sense. I've queued up your fix in x86.git (sans the debug printks), please send your signoff once you can verify that it solves the hibernation hang on your box and we'll push it into 2.6.25.
Ingo
Quoted 16 lines · Ingo Molnar
drivers/char/agp/amd64-agp.c static struct pci_driver agp_amd64_pci_d · line 740
Quoted 9 lines · Pavel Machek
drivers/char/agp/amd64-agp.c +2
-2@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume, #endifah, makes sense. I've queued up your fix in x86.git (sans the debug printks), please send your signoff once you can verify that it solves the hibernation hang on your box and we'll push it into 2.6.25.
I've not even compiled it. It is obviously
(it is GPLed) ...but it is totally untested, and probably same fix needs to go to all the agp drivers...?
I'll test it tommorow.
Pavel
Signature · 3 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html pomozte zachranit klanovicky les: http://www.ujezdskystrom.info/
Quoted 4 lines
Signed-off-by Pavel Machek <[email protected]>(it is GPLed) ...but it is totally untested, and probably same fix needs to go to all the agp drivers...?
No the other AGP drivers don't have IOMMU functionality.
Also there still need to be Kconfig changes or alternatively extracting the suspend/resume code to another file that is selected by both AGP and IOMMU.
-Andi
Hi!
Quoted 4 lines
Quoted 2 lines
(it is GPLed) ...but it is totally untested, and probably same fix needs to go to all the agp drivers...?
No the other AGP drivers don't have IOMMU functionality.
Ok, good.
Quoted 3 lines
Also there still need to be
Kconfigchanges or alternatively extracting the suspend/resume code to another file that is selected by both AGP and IOMMU.
Well, it gets weirder. Boot messages are:
Checking aperture...
Node 0: aperture @ 0 size 32 MB
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
...who is responsible for mapping aperture back during resume? It seems like it is not amd64-agp: it does not find its hardware...?
Pavel
Signature · 3 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html pomozte zachranit klanovicky les: http://www.ujezdskystrom.info/
Quoted 16 lines · Ingo Molnar
drivers/char/agp/amd64-agp.c static struct pci_driver agp_amd64_pci_d · line 740
Quoted 9 lines · Pavel Machek
drivers/char/agp/amd64-agp.c +2
-2@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume, #endifah, makes sense. I've queued up your fix in x86.git (sans the debug printks), please send your signoff once you can verify that it solves the hibernation hang on your box and we'll push it into 2.6.25.
You have my signed-off from previous email, but...
it does not solve a problem here -- see the mail to andi. It may still be good idea to take it (but I do not think it should go to 2.6.25), but may machine still does not work.
Pavel
Signature · 3 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html pomozte zachranit klanovicky les: http://www.ujezdskystrom.info/
(eats disks) Re: iommu breaks usb after resume
Quoted 18 lines · Pavel Machek
Quoted 16 lines · Ingo Molnar
drivers/char/agp/amd64-agp.c static struct pci_driver agp_amd64_pci_d · line 740
Quoted 9 lines · Pavel Machek
drivers/char/agp/amd64-agp.c +2
-2@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume, #endifah, makes sense. I've queued up your fix in x86.git (sans the debug printks), please send your signoff once you can verify that it solves the hibernation hang on your box and we'll push it into 2.6.25.
Quoted 5 lines
You have my signed-off from previous email, but...
it does not solve a problem here -- see the mail to andi. It may still be good idea to take it (but I do not think it should go to 2.6.25), but may machine still does not work.
Hmm, seems like this is pretty dangerous area. On resume, system is in half-alive state: it responds to commands but IOMMU is just not configure.
Unfortunately, it decided to write crap over my boot sector :-(.
Pavel
Signature · 3 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html pomozte zachranit klanovicky les: http://www.ujezdskystrom.info/
Hi!
Quoted 16 lines
Quoted 15 lines · Pavel Machek
drivers/char/agp/amd64-agp.c static struct pci_driver agp_amd64_pci_d · line 740
Quoted 10 lines
drivers/char/agp/amd64-agp.c +2
-2@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume, #endifah, makes sense. I've queued up your fix in x86.git (sans the debug printks), please send your signoff once you can verify that it solves the hibernation hang on your box and we'll push it into 2.6.25.
Quoted 5 lines
You have my signed-off from previous email, but...
it does not solve a problem here -- see the mail to andi. It may still be good idea to take it (but I do not think it should go to 2.6.25), but may machine still does not work.
No, I do not think problems are in drivers/char/agp...
end of aperture_64.c:
/* Fix up the north bridges */
for (num = 24; num < 32; num++) {
if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
continue;
/*
* Don't enable translation yet. That is done later.
* Assume this BIOS didn't initialise the GART so
* just overwrite all previous bits
*/
write_pci_config(0, num, 3, 0x90, aper_order<<1);
write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
}
}...this sounds like it needs to be done during resume, too, no?
Where's the other part? "Don't enable translation yet"? What enables the translation?
Pavel
Signature · 3 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html pomozte zachranit klanovicky les: http://www.ujezdskystrom.info/
Quoted 1 line
...this sounds like it needs to be done during resume, too, no?
This is only a workaround for BIOS that don't set up an aperture, but yes if they don't do that it is likely needed on resume too.
You would need to add a resume handler to aperture.c
-Andi
Hi!
Quoted 6 lines
Quoted 1 line
...this sounds like it needs to be done during resume, too, no?
This is only a workaround for BIOS that don't set up an aperture, but yes if they don't do that it is likely needed on resume too.
You would need to add a resume handler to
aperture.c
Probably this needs to be redone during resume, right?
/* Fix up the north bridges */
for (num = 24; num < 32; num++) {
if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
continue;
/*
* Don't enable translation yet. That is done later.
* Assume this BIOS didn't initialise the GART so
* just overwrite all previous bits
*/
write_pci_config(0, num, 3, 0x90, aper_order<<1);
write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
}....plus the "enable translation" part... but where is that hiding?
Pavel
Signature · 3 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html pomozte zachranit klanovicky les: http://www.ujezdskystrom.info/
Quoted 10 lines · Pavel Machek
Hi!
Quoted 6 lines
Quoted 1 line
...this sounds like it needs to be done during resume, too, no?
This is only a workaround for BIOS that don't set up an aperture, but yes if they don't do that it is likely needed on resume too.
You would need to add a resume handler to
aperture.cProbably this needs to be redone during resume, right?
Yes, but using the standard pci access functions to avoid races which the early boot code can ignore.
Quoted 15 lines
/* Fix up the north bridges */
for (num = 24; num < 32; num++) {
if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
continue;
/*
* Don't enable translation yet. That is done later.
* Assume this BIOS didn't initialise the GART so
* just overwrite all previous bits
*/
write_pci_config(0, num, 3, 0x90, aper_order<<1);
write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
}Quoted 1 line
....plus the "enable translation" part... but where is that hiding?
Both pci-gart and the AGP driver have code for this.
-Andi
Quoted 59 lines · Pavel Machek
Hi!
Quoted 8 lines
Quoted 8 lines
CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=y
#CONFIG_AGP_SISis not setCONFIG_AGP_VIA=yCONFIG_DRM=y
#CONFIG_DRM_TDFXis not setQuoted 5 lines
Quoted 1 line
...do I need to enable something more?
Should have worked then. Ok modulo bugs. Maybe the ordering is wrong now (AGP resume would need to run before anything using the IOMMU)
So
agp_amd64_resume()is responsible for reiniting iommu on new amd64 boxes?It is registered as normal pci driver:
static struct pci_driver agp_amd64_pci_driver = { .name = "agpgart-amd64", .id_table = agp_amd64_pci_table, .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM .suspend = agp_amd64_suspend, .resume = agp_amd64_resume,#endif
};...should it be modified to run early, as other pci devices (USB controllers) may rely on this?
I did this... I'll verify it in 10 hours or so. If someone has amd64 system with >=4G ram, there should be hibernation problems. This should fix it:
drivers/char/agp/amd64-agp.c +2
-0@@ -594,12 +594,14 @@ static int agp_amd64_suspend(struct pci_static int agp_amd64_resume (struct pci_dev *pdev) { +printk ("agp_amd64: resume\n" );pci_set_power_state (pdev,PCI_D0 );pci_restore_state (pdev);if (pdev->vendor ==PCI_VENDOR_ID_NVIDIA )nforce3_agp_init (pdev); +printk ("agp_amd64: 8151 configure\n" );return amd_8151_configure (); }
drivers/char/agp/amd64-agp.c static struct pci_driver agp_amd64_pci_d · line 741
Quoted 9 lines
drivers/char/agp/amd64-agp.c +2
-2@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume,#endif };
Okay, a couple of questions:
(1) Are you sure that the .suspend() and .resume() callbacks will just work with interrupts disabled?
(2) Even if they work, is it sufficient to just move them to the "late" and "early" parts? That is, isn't there anything using the iommu in the "early" and "late" callbacks of the other devices?
Rafael
Quoted 72 lines · Rafael J. Wysocki
Quoted 59 lines · Pavel Machek
Hi!
Quoted 8 lines
Quoted 8 lines
CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=y
#CONFIG_AGP_SISis not setCONFIG_AGP_VIA=yCONFIG_DRM=y
#CONFIG_DRM_TDFXis not setQuoted 5 lines
Quoted 1 line
...do I need to enable something more?
Should have worked then. Ok modulo bugs. Maybe the ordering is wrong now (AGP resume would need to run before anything using the IOMMU)
So
agp_amd64_resume()is responsible for reiniting iommu on new amd64 boxes?It is registered as normal pci driver:
static struct pci_driver agp_amd64_pci_driver = { .name = "agpgart-amd64", .id_table = agp_amd64_pci_table, .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM .suspend = agp_amd64_suspend, .resume = agp_amd64_resume,#endif
};...should it be modified to run early, as other pci devices (USB controllers) may rely on this?
I did this... I'll verify it in 10 hours or so. If someone has amd64 system with >=4G ram, there should be hibernation problems. This should fix it:
drivers/char/agp/amd64-agp.c +2
-0@@ -594,12 +594,14 @@ static int agp_amd64_suspend(struct pci_static int agp_amd64_resume (struct pci_dev *pdev) { +printk ("agp_amd64: resume\n" );pci_set_power_state (pdev,PCI_D0 );pci_restore_state (pdev);if (pdev->vendor ==PCI_VENDOR_ID_NVIDIA )nforce3_agp_init (pdev); +printk ("agp_amd64: 8151 configure\n" );return amd_8151_configure (); }drivers/char/agp/amd64-agp.c static struct pci_driver agp_amd64_pci_d · line 741
Quoted 9 lines
drivers/char/agp/amd64-agp.c +2
-2@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume,#endif };Okay, a couple of questions:
Quoted 2 lines
(1) Are you sure that the .suspend() and .resume() callbacks will just work with interrupts disabled?
I have not really checked -- it turned out this is not "my" problem after all. My machine (called leet) uses different setup. If they will not, I guess lockdep will tell us ;-).
Quoted 3 lines
(2) Even if they work, is it sufficient to just move them to the "late" and "early" parts? That is, isn't there anything using the iommu in the "early" and "late" callbacks of the other devices?
We definitely have iommu users in "normal" callbacks: USB. I do not think we have iommu users in early/late callbacks...
Pavel
Signature · 3 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html pomozte zachranit klanovicky les: http://www.ujezdskystrom.info/
Quoted 73 lines · Pavel Machek
Quoted 72 lines · Rafael J. Wysocki
Quoted 59 lines · Pavel Machek
Hi!
Quoted 8 lines
Quoted 8 lines
CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=y
#CONFIG_AGP_SISis not setCONFIG_AGP_VIA=yCONFIG_DRM=y
#CONFIG_DRM_TDFXis not setQuoted 5 lines
Quoted 1 line
...do I need to enable something more?
Should have worked then. Ok modulo bugs. Maybe the ordering is wrong now (AGP resume would need to run before anything using the IOMMU)
So
agp_amd64_resume()is responsible for reiniting iommu on new amd64 boxes?It is registered as normal pci driver:
static struct pci_driver agp_amd64_pci_driver = { .name = "agpgart-amd64", .id_table = agp_amd64_pci_table, .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM .suspend = agp_amd64_suspend, .resume = agp_amd64_resume,#endif
};...should it be modified to run early, as other pci devices (USB controllers) may rely on this?
I did this... I'll verify it in 10 hours or so. If someone has amd64 system with >=4G ram, there should be hibernation problems. This should fix it:
drivers/char/agp/amd64-agp.c +2
-0@@ -594,12 +594,14 @@ static int agp_amd64_suspend(struct pci_static int agp_amd64_resume (struct pci_dev *pdev) { +printk ("agp_amd64: resume\n" );pci_set_power_state (pdev,PCI_D0 );pci_restore_state (pdev);if (pdev->vendor ==PCI_VENDOR_ID_NVIDIA )nforce3_agp_init (pdev); +printk ("agp_amd64: 8151 configure\n" );return amd_8151_configure (); }drivers/char/agp/amd64-agp.c static struct pci_driver agp_amd64_pci_d · line 741
Quoted 9 lines
drivers/char/agp/amd64-agp.c +2
-2@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume,#endif };Okay, a couple of questions:
Quoted 6 lines
Quoted 2 lines
(1) Are you sure that the .suspend() and .resume() callbacks will just work with interrupts disabled?
I have not really checked -- it turned out this is not "my" problem after all. My machine (called leet) uses different setup. If they will not, I guess lockdep will tell us ;-).
Lockdep need not tell us about it, I think. OTOH, I don't really see a scenario in which having interrupts disabled while executing ->suspend() and ->resume() might hurt.
Quoted 5 lines
Quoted 3 lines
(2) Even if they work, is it sufficient to just move them to the "late" and "early" parts? That is, isn't there anything using the iommu in the "early" and "late" callbacks of the other devices?
We definitely have iommu users in "normal" callbacks: USB.
Oh, there may be more. You never know what appears in future systems. :-)
Quoted 1 line
I do not think we have iommu users in early/late callbacks...
Perhaps not at the moment, but what's the guarantee there won't be any in the future?
Rafael
Hi!
Quoted 35 lines
Quoted 35 lines
Quoted 34 lines
Quoted 20 lines
drivers/char/agp/amd64-agp.c +2
-0@@ -594,12 +594,14 @@ static int agp_amd64_suspend(struct pci_static int agp_amd64_resume (struct pci_dev *pdev) { +printk ("agp_amd64: resume\n" );pci_set_power_state (pdev,PCI_D0 );pci_restore_state (pdev);if (pdev->vendor ==PCI_VENDOR_ID_NVIDIA )nforce3_agp_init (pdev); +printk ("agp_amd64: 8151 configure\n" );return amd_8151_configure (); }drivers/char/agp/amd64-agp.c static struct pci_driver agp_amd64_pci_d · line 741
Quoted 9 lines
drivers/char/agp/amd64-agp.c +2
-2@@ -733,8 +735,8 @@ static struct pci_driver agp_amd64_pci_d .probe = agp_amd64_probe, .remove = agp_amd64_remove, #ifdef CONFIG_PM - .suspend = agp_amd64_suspend, - .resume = agp_amd64_resume, + .suspend_late = agp_amd64_suspend, + .resume_early = agp_amd64_resume,#endif };Okay, a couple of questions:
(1) Are you sure that the .suspend() and .resume() callbacks will just work with interrupts disabled?
Quoted 7 lines
Quoted 3 lines
I have not really checked -- it turned out this is not "my" problem after all. My machine (called leet) uses different setup. If they will not, I guess lockdep will tell us ;-).
Lockdep need not tell us about it, I think. OTOH, I don't really see a scenario in which having interrupts disabled while executing ->suspend() and ->resume() might hurt.
Ok.
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
(2) Even if they work, is it sufficient to just move them to the "late" and "early" parts? That is, isn't there anything using the iommu in the "early" and "late" callbacks of the other devices?
We definitely have iommu users in "normal" callbacks: USB.
Oh, there may be more. You never know what appears in future systems. :-)
Well, we'll catch them during code review, right?
Quoted 4 lines
Quoted 1 line
I do not think we have iommu users in early/late callbacks...
Perhaps not at the moment, but what's the guarantee there won't be any in the future?
That's why we review changes... ok, maybe documenting it somewhere would be nice...?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html